Influence of the addition of chlorhexidine diacetate on bond strength of a high-viscosity glass ionomer cement to sound and artificial caries-affected dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Recycling scrap automotive heat shield insulation material

Automotive heat shields are usually composed of two metal sheets enclosing an insulating material with a paper-like texture that contains refractory ceramic particles. This article discusses the results achieved by recycling the scrap automotive insulation that is discarded in landfills, using the same concept as paper recycling. For comparison with the original product, tests of thickness, bulk density, weight loss on ignition, tensile strength, compressibility, and recovery were performed on recycled materials produced in a so-called "manual" process (involving little automation and performed in adapted facilities) without pressing, and pressed once, twice, and four times. Materials recycled in a so-called "industrial" process (in a paper recycling plant) without pressing, and pressed once were also tested. The recycled materials can be considered approved with respect to the main requirement, thermal insulation, since they dissipated the under-hood temperature by more than 300 A degrees C (like the original product). Like the heat insulation tests, the thermogravimetric analysis suggested that the recycled materials showed higher stability than the original product. Thermogravimetric, microscopy, and energy dispersive spectroscopy analyses indicated that the structural and compositional characteristics of the original product were preserved after recycling.

Margolisianum bulbosum n. gen., n. sp. (Nematoda: Philometridae) from the Southern Flounder, Paralichthys lethostigma (Pisces: Bothidae), in Mississippi Sound, USA

A new species of a philometrid nematode, Margolisianum bulbosum, is described from the subcutaneous tissue in the mouth (larvigerous females), head (males, ovigerous, and larvigerous females), and eye (preovigerous females) of the southern flounder, Paralichthys lethostigma, from Mississippi Sound. It is placed in a new genus diagnosed by the combination of 8 large, paired but separate cephalic papillae; no inner cephalic papillae; an esophagus with a separate, muscular anterior bulb; a prominent mononuclear esophageal gland; and variable, irregularly distributed cuticular bosses in the females, as well as a vestigial rectum, particularly in larvigerous females. Some female specimens exhibit rows of lateral grooves and longitudinal ridges near the posterior end. Males have two small slightly subequal spicules, a barbed gubernaculum, 4 pairs of small cephalic papillae, and a bipartite hypodermal extension within a membranous cuticle on the posterior end. Males, ovigerous females, and larvigerous females appear to be present year round in this sporadic infection in Mississippi.

Food Content of Six Commercial Fishes from Mississippi Sound

Specific dietary contents from six fishes collected in Mississippi Sound are recorded. In order of their importance, primary components grouped in major taxonomic categories were fishes, penaeid shrimps, and other crustaceans for Cynoscion nebulosus; Crustaceans and fishes for C. arenarius; fishes and crustaceans for C. nothus; crustaceans, pelecypods, and polychaetes for Pogonias cromis; crustaceans, molluscs, polychaetes, and fishes for Archosargus probatocephalus; and fishes and penaeid shrimps for Paralichthys lethostigma. Principal items in the diets of most of the fishes included Anchoa mitchilli, Penaeus aztecus, P. setiferus, and Callinectes sapidus. Those crustaceans show that competition exists for commercial shellfishes in Mississippi Sound. Ratios among the different dietary items vary, according at least to species of fish, length of fish, season, specific location, and abundance of available prey. Some of these variations are documented and are additionally related to selected findings by other authors sampling different localities. We suggest that examination of food items in Archosargus probatocephalus can serve as a practical means to sample and assess seasonal prevalence and abundance of a wide range of invertebrates throughout different habitats in Mississippi Sound and elsewhere.

Cetacean Notes. I. Sei and Rorqual Whales on the Mississippi Coast, a Correction. II. A Dwarf Sperm Whale in Mississippi Sound and Its Helminth Parasites

I. Gunter and Christmas (1973) described the events leading to the stranding of a baleen whale on Ship Island, Mississippi, in 1968, giving the species as Balaenopteru physalus, the Rorqual. Unfortunately the identification was in error, but fortunately good photographs were shown. The underside of the tail was a splotched white, but there was no black margin. The specimen also had fewer throat and belly grooves than the Rorqual, as a comparison with True’s (1904) photograph shows. Dr. James Mead (in litt.) pointed out that the animal was a Sei Whale, Balaenoptera borealis. This remains a new Mississippi record and according to Lowery’s (1974) count, it is the fifth specimen reported from the Gulf of Mexico. The stranding of a sixth Sei Whale on Anclote Keys in the Gulf, west of Tarpon Springs, Florida on 30 May 1974, was reported in the newspapers and by the Smithsonian Institution (1974). II. Gunter, Hubbs and Beal (1955) gave measurements on a Pygmy Sperm Whale, Kogia breviceps, which stranded on Mustang Island on the Texas coast and commented upon the recorded variations of proportional measurements in this species. Then according to Raun, Hoese and Moseley (1970) these questions were resolved by Handley (1966), who showed that a second species, Kogia simus, the Dwarf Sperm Whale, is also present in the western North Atlantic. Handley’s argument is based on skull comparisons and it seems to be rather indubitable. According to Raun et al. (op. cit.), the stranding of a species of Kogia on Galveston Island recorded by Caldwell, Ingles and Siebenaler (1960) was K. simus. They also say that Caldwell (in litt.) had previously come to the same conclusion. Caldwell et al. also recorded another specimen from Destin, Florida, which is now considered to have been a specimen of simus. The known status of these two little sperm whales in the Gulf is summarized by Lowery (op. cit.).

Food of the Atlantic Croaker, Micropogonias undulatus, from Mississippi Sound and the Gulf of Mexico

The diet of the Atlantic croaker from Mississippi Sound has been examined for the first time. Over 83 taxa were encountered, or more than were reported from croaker in any other region. We also found 60 taxa, 36 of which overlapped with the above, in croaker from various offshore stations in the Gulf of Mexico. In Mississippi Sound the frequency of occurrcnce of items revealed primarily crustaceans followed by polychaetes, molluscs, fishes, and less common items, and, in the open Gulf, molluscs appeared slightly more often than in inshore croaker and than polychaetes in offshore fish. The diets were assessed according to length of fish, season, depth of water, and locality.

Food of the Red Drum, Sciaenops ocellata, from Mississippi Sound

Examined digestive tracts of the red drum in Mississippi Sound contained mostly decapod crustaceans. Crustaceans accounted for 34 of 59 encountered taxa, more than reported from any other region. Nevertheless, the general diet for 104 fish with food contents out of the 107 examined is similar to that reported for red drum in several other studies from other areas. In addition to crustaceans, fishes followed by polychaetes occurred as the most important items (in 99, 43, and 15% of the drum with food, respectively). Blue crabs occurred in even more drum than the frequently encountered penaeid shrimps. Other commercial species were negligible in the diet. Sixteen large drum from Georgia beaches were also examined; unlike those from Mississippi, many of these contained echinoderms, but not polychaetes or penaeids. We suggest that the red drum’s migrations may be regulated by optimal abundance of specific types of dietary organisms.

Health Assessment of Weddell Seals, Leptonychotes weddellii, in McMurdo Sound, Antarctica

The demography of Weddell seals in eastern McMurdo Sound, Antarctica, has been well studied during the past three decades (e.g. Stirling 1971; Siniff et al. 1977; Testa and Siniff 1987; Hastings and Testa 1998; Gelatt et al. 2001). Detailed life-history data are available on thousands of seals tagged as pups in McMurdo Sound, making this population a rich resource for wildlife health studies because health parameters can be evaluated in the light of reproductive histories and genetic relationships of several generations of tagged seals. Recently, evidence of exposure to diseases generally associated with domestic animals and feral wildlife has been detected in Antarctic wildlife (Austin and Webster 1993; Olsen et al. 1996; Gardner et al. 1997; Retamal et al. 2000; Foster et al. 2002) and this has generated concern and debate regarding the risks of disease introduction to Antarctic wildlife. Antibodies to viruses that have caused large die-offs in phocids in other areas of the world have been detected in Weddell seals (Bengtson et al. 1991), and there is a historical report of a mass die-off of crabeater seals that may have had a viral etiology (Laws and Taylor 1957).

INVESTIGATION OF PATIENT PERCEPTION OF HOSPITAL NOISE AND SOUND LEVEL MEASUREMENTS: BEFORE, DURING, AND AFTER RENOVATIONS OF A HOSPITAL WING

Acoustic conditions in hospitals have been shown to influence a patient’s physical and psychological health. Noise levels in an Omaha, Nebraska, hospital were measured and compared between various times: before, during, and after renovations of a hospital wing. The renovations included cosmetic changes and the installation of new in-room patient audio-visual systems. Sound pressure levels were logged every 10-seconds over a four-day period in three different locations: at the nurses' station, in the hallway, and in a nearby patient’s room. The resulting data were analyzed in terms of the hourly A-weighted equivalent sound pressure levels (

Numerical study of Mach number and thermal effects on sound radiation by a mixing layer

Mach number and thermal effects on the mechanisms of sound generation and propagation are investigated in spatially evolving two-dimensional isothermal and non-isothermal mixing layers at Mach number ranging from 0.2 to 0.4 and Reynolds number of 400. A characteristic-based formulation is used to solve by direct numerical simulation the compressible Navier-Stokes equations using high-order schemes. The radiated sound is directly computed in a domain that includes both the near-field aerodynamic source region and the far-field sound propagation. In the isothermal mixing layer, Mach number effects may be identified in the acoustic field through an increase of the directivity associated with the non-compactness of the acoustic sources. Baroclinic instability effects may be recognized in the non-isothermal mixing layer, as the presence of counter-rotating vorticity layers, the resulting acoustic sources being found less efficient. An analysis based on the acoustic analogy shows that the directivity increase with the Mach number can be associated with the emergence of density fluctuations of weak amplitude but very efficient in terms of noise generation at shallow angle. This influence, combined with convection and refraction effects, is found to shape the acoustic wavefront pattern depending on the Mach number.

Thermal alteration and morphological changes of sound and demineralized primary dentin after Er:YAG laser ablation

The purpose of this study was to assess the influence of Er:YAG laser pulse repetition rate on the thermal alterations occurring during laser ablation of sound and demineralized primary dentin. The morphological changes at the lased areas were examined by scanning electronic microscopy (SEM). To this end, 60 fragments of 30 sound primary molars were selected and randomly assigned to two groups (n = 30); namely A sound dentin (control) and B demineralized dentin. Each group was divided into three subgroups (n = 10) according to the employed laser frequencies: I4 Hz; II6 Hz, and III10 Hz. Specimens in group B were submitted to a pH-cycling regimen for 21 consecutive days. The irradiation was performed with a 250 mJ pulse energy in the noncontact and focused mode, in the presence of a fine water mist at 1.5 mL/min, for 15 s. The measured temperature was recorded by type K thermocouples adapted to the dentin wall relative to the pulp chamber. Three samples of each group were analyzed by SEM. The data were submitted to the nonparametric Kruskal-Wallis test and to qualitative SEM analysis. The results revealed that the temperature increase did not promote any damage to the dental structure. Data analysis demonstrated that in group A, there was a statistically significant difference among all the subgroups and the temperature rise was directly proportional to the increase in frequency. In group B, there was no difference between subgroup I and II in terms of temperature. The superficial dentin observed by SEM displayed irregularities that augmented with rising frequency, both in sound and demineralized tissues. In conclusion, temperature rise and morphological alterations are directly related to frequency increment in both demineralized and sound dentin. Microsc. Res. Tech., 2011. (c) 2011 Wiley Periodicals, Inc.

Laminated Tubular-channel Ferroelectret Systems from Low-density Polyethylene Films and from Fluoroethylene-propylene Copolymer Films - A Comparison

A template-based lamination technique for the manufacture of ferroelectrets from uniform electret films was recently reported. In the present work, this technique is used to prepare similar ferroelectret structures from low-density polyethylene (LDPE) films and from fluoro-ethylene-propylene (FEP) copolymer films. A comparative analysis of the pressure-, temperature-, and frequency-dependent piezoelectric properties has been performed on the two ferroelectret systems. It is observed that the FEP ferroelectrets exhibit better piezoelectric responses and are thermally more stable. The difference between the piezoelectric d(33) coefficients of the two ferroelectret systems is partially explained here by their different elastic moduli. The anti-resonance peaks of both structures have been investigated by means of dielectric resonance spectroscopy and electroacoustic sound-pressure measurements. A difference of more than 10 kHz is observed between the anti-resonance frequencies of the two ferroelectret systems.

The uncertainty in standardised sound power measurements: complying with ISO 17025

In the context of “testing laboratory” one of the most important aspect to deal with is the measurement result. Whenever decisions are based on measurement results, it is important to have some indication of the quality of the results. In every area concerning with noise measurement many standards are available but without an expression of uncertainty, it is impossible to judge whether two results are in compliance or not. ISO/IEC 17025 is an international standard related with the competence of calibration and testing laboratories. It contains the requirements that testing and calibration laboratories have to meet if they wish to demonstrate that they operate to a quality system, are technically competent and are able to generate technically valid results. ISO/IEC 17025 deals specifically with the requirements for the competence of laboratories performing testing and calibration and for the reporting of the results, which may or may not contain opinions and interpretations of the results. The standard requires appropriate methods of analysis to be used for estimating uncertainty of measurement. In this point of view, for a testing laboratory performing sound power measurement according to specific ISO standards and European Directives, the measurement of uncertainties is the most important factor to deal with. Sound power level measurement, according to ISO 3744:1994 , performed with a limited number of microphones distributed over a surface enveloping a source is affected by a certain systematic error and a related standard deviation. Making a comparison of measurement carried out with different microphone arrays is difficult because results are affected by systematic errors and standard deviation that are peculiarities of the number of microphones disposed on the surface, their spatial position and the complexity of the sound field. A statistical approach could give an overview of the difference between sound power level evaluated with different microphone arrays and an evaluation of errors that afflict this kind of measurement. Despite the classical approach that tend to follow the ISO GUM this thesis present a different point of view of the problem related to the comparison of result obtained from different microphone arrays.