Small- and waiting-time behaviour of the thin-film-equation

We consider the small-time behavior of interfaces of zero contact angle solutions to the thin-film equation. For a certain class of initial data, through asymptotic analyses, we deduce a wide variety of behavior for the free boundary point. These are supported by extensive numerical simulations. © 2007 Society for Industrial and Applied Mathematics

Estimating the spatial scale of herbicide and soil interactions by nested sampling, hierarchical analysis of variance and residual maximum likelihood

An unbalanced nested sampling design was used to investigate the spatial scale of soil and herbicide interactions at the field scale. A hierarchical analysis of variance based on residual maximum likelihood (REML) was used to analyse the data and provide a first estimate of the variogram. Soil samples were taken at 108 locations at a range of separating distances in a 9 ha field to explore small and medium scale spatial variation. Soil organic matter content, pH, particle size distribution, microbial biomass and the degradation and sorption of the herbicide, isoproturon, were determined for each soil sample. A large proportion of the spatial variation in isoproturon degradation and sorption occurred at sampling intervals less than 60 m, however, the sampling design did not resolve the variation present at scales greater than this. A sampling interval of 20-25 m should ensure that the main spatial structures are identified for isoproturon degradation rate and sorption without too great a loss of information in this field.

Comparison of small and large deformation rheological properties of wheat dough and gluten

The rheological properties of dough and gluten are important for end-use quality of flour but there is a lack of knowledge of the relationships between fundamental and empirical tests and how they relate to flour composition and gluten quality. Dough and gluten from six breadmaking wheat qualities were subjected to a range of rheological tests. Fundamental (small-deformation) rheological characterizations (dynamic oscillatory shear and creep recovery) were performed on gluten to avoid the nonlinear influence of the starch component, whereas large deformation tests were conducted on both dough and gluten. A number of variables from the various curves were considered and subjected to a principal component analysis (PCA) to get an overview of relationships between the various variables. The first component represented variability in protein quality, associated with elasticity and tenacity in large deformation (large positive loadings for resistance to extension and initial slope of dough and gluten extension curves recorded by the SMS/Kieffer dough and gluten extensibility rig, and the tenacity and strain hardening index of dough measured by the Dobraszczyk/Roberts dough inflation system), the elastic character of the hydrated gluten proteins (large positive loading for elastic modulus [G'], large negative loadings for tan delta and steady state compliance [J(e)(0)]), the presence of high molecular weight glutenin subunits (HMW-GS) 5+10 vs. 2+12, and a size distribution of glutenin polymers shifted toward the high-end range. The second principal component was associated with flour protein content. Certain rheological data were influenced by protein content in addition to protein quality (area under dough extension curves and dough inflation curves [W]). The approach made it possible to bridge the gap between fundamental rheological properties, empirical measurements of physical properties, protein composition, and size distribution. The interpretation of this study gave indications of the molecular basis for differences in breadmaking performance.

Entropic risk analysis by a high level decision support system (e-FDSS) for construction SMEs

The method of entropy has been useful in evaluating inconsistency on human judgments. This paper illustrates an entropy-based decision support system called e-FDSS to the solution of multicriterion risk and decision analysis in projects of construction small and medium enterprises (SMEs). It is optimized and solved by fuzzy logic, entropy, and genetic algorithms. A case study demonstrated the use of entropy in e-FDSS on analyzing multiple risk criteria in the predevelopment stage of SME projects. Survey data studying the degree of impact of selected project risk criteria on different projects were input into the system in order to evaluate the preidentified project risks in an impartial environment. Without taking into account the amount of uncertainty embedded in the evaluation process; the results showed that all decision vectors are indeed full of bias and the deviations of decisions are finally quantified providing a more objective decision and risk assessment profile to the stakeholders of projects in order to search and screen the most profitable projects.

Electronic commerce in agriculture and agribusiness: the case of Emilia-Romagna (Italy )

Despite the expectations of the benefits of this tool, the adoption of Electronic Commerce (EC) by small and medium firms of the agro-food sector in Italy is still not frequent, however, the understanding of opportunities it could create and how they can be exploited remains a relevant issue. This study, carried out in the Emilia -Romagna region during 2002, illustrates the results of a survey of 208 firms at all stages of the agro-food chain aimed at understanding the use of the Internet and the strategies adopted for EC implementation. The results show a low level of implementation of the instrument and a limited variety of adoption strategies. Agro-food firms actually invest very little in EC focusing their efforts on the Internet as promotion tool, while web-based direct selling is confined to market niches. The view that the Internet would reverse the disadvantages of small firms appears by now non realistic, even if interesting opportunities for further development are still present.

Understanding complexities in international accounting standard setting: agenda entry and the case of IFRS for SMEs

Earlier accounting works have shown that an understanding of agenda entry is critical to better understanding the accounting standards setting process. Consider Walker and Robinson (1993; 1994) and Ryan (1998); and more generally agenda entrance as theorized in Kingdon (2011). In 2003, the IASB placed on its agenda a project to promulgate a standard for small and medium-sized entities (SMEs). This provides our focus. It seemed to be a departure from the IASB’s constitutional focus on capital market participants. Kingdon’s three-streams model of agenda entry helps to identify some of the complexities related to politics and decision making messiness that resulted in a standard setting project for simplified IFRS, misleadingly titled IFRS for SMEs. Complexities relate to the broader international regulatory context, including the boundaries of the IASB’s standard-setting jurisdiction, the role of board members in changing those boundaries, and such sensitivities over the language that the IASB could not agree on a suitably descriptive title. The paper shows similarities with earlier agenda entrance studies by Walker and Robinson (1994) and Ryan (1998). By drawing on interviewees’ recollections and other material it especially reinforces the part played by the nuanced complexities that influence what emerges as an international accounting standard.

IFRS for SMEs: the IASB’S due process

This study explores the role of the International Accounting Standards Board’s (IASB) due process in developing its International Financial Reporting Standards for Small and Medium-sized Entities (IFRS or SMEs)standard. There were tensions between the IASB’s desire to minimise divergence from full IFRS and preserve recognition and measurement principles, and the primary reasons for undertaking the project – to meet the needs of users of financial statements of SMEs and to reduce the financial reporting burden on SMEs. Examination of events during the development of the project reveals much that was not apparent from material in the public domain. Most significantly, the IASB recognised that the final title of the standard, IFRS for SMEs, does not necessarily describe the scope of the standard. This paper also shows that the due process followed in the case of the IFRS for SMEs project barely reflected the ‘will of people’ but was more inclined towards acting as a communicative function for the IASB without any commitment to change its stance on the SME standard.

The use and usefulness of financial assistance to UK SMEs

Existing literature has paid considerable attention to the effects of supporting programmes on the survival and performance of small and medium-sized enterprises (SMEs), but it lacks a deep understanding of the benefits of the use of such assistance and the factors influencing the evaluation of such services from the perspective of SMEs. We examine the factors affecting the propensity to use assistance when SMEs make financial decisions and the usefulness perceived by the users. We examine 2500 UK SMEs and find that the use of assistance and the usefulness of such services, as perceived by SMEs, are much related to: the characteristics of the entrepreneur, the nature of the business, and the financial products used by the business. These empirical results imply that support and advice on financial decision making, available for SMEs, are important for them to better manage and to access finance. Assistance and advice are also very valuable for SMEs and entrepreneurs to compensate for their lack of human capital and thus facilitate overcoming possible problems in managing their businesses.

A three-fold framework for understanding HRM practices in South-Eastern European SMEs

Purpose We study particular structural and organisational factors affecting the formality of human resource management (HRM) practices in small and medium-sized enterprises (SMEs) in South-Eastern European (SEE) post-communist countries, in particular Serbia, Romania, Bulgaria and the Former Yugoslav Republic of Macedonia (FYROM) in order to understand the antecedents of formalization in such settings. Design/methodology/approach Adopting a quantitative approach, this study analyses data gathered through a survey of 168 managers of SMEs from throughout the region. Findings The results show that HRM in SMEs in the SEE region can be understood through a three-fold framework which includes: degree of internationalisation of SMEs, sector of SMEs and organisational size of SMEs. These three factors positively affect the level of HRM formalisation in SEE SMEs. These findings are further attributed to the particular political and economic context of the post-communist SEE region. Research limitations/implications Although specific criteria were set for SME selection, we do not suggest that the study reflects a representative picture of the SEE region because we used a purposive sampling methodology. Practical implications This article provides useful insights into the factors which influence HRM in SMEs in a particular context. The findings can help business owners and managers understand how HRM can be applied in smaller organisations, particularly in post-communist SEE business contexts. Originality/value HRM in SMEs in this region has hardly been studied at all despite their importance. Therefore, this exploratory research seeks to expand knowledge relating to the application of HRM in SMEs in SEE countries which have their business environments dominated by different dynamics in comparison to western European ones.

Habitat fragmentation reduces genetic diversity and connectivity among toad populations in the Brazilian Atlantic Coastal Forest

Tropical rainforests are becoming increasingly fragmented and understanding the genetic consequences of fragmentation is crucial for conservation of their flora and fauna. We examined populations of the toad Rhinella ornata, a species endemic to Atlantic Coastal Forest in Brazil, and compared genetic diversity among small and medium forest fragments that were either isolated or connected to large forest areas by corridors. Genetic differentiation, as measured by F(ST), was not related to geographic distance among study sites and the size of the fragments did not significantly alter patterns of genetic connectivity. However, population genetic diversity was positively related to fragment size, thus haplotype diversity was lowest in the smallest fragments, likely due to decreases in population sizes. Spatial analyses of genetic discontinuities among groups of populations showed a higher proportion of barriers to gene flow among small and medium fragments than between populations in continuous forest. Our results underscore that even species with relatively high dispersal capacities may, over time, suffer the negative genetic effects of fragmentation, possibly leading to reduced fitness of population and cases of localized extinction. (C) 2008 Elsevier Ltd. All rights reserved.

Comparing methods for sampling large- and medium-sized mammals: camera traps and track plots

Activities involving fauna monitoring are usually limited by the lack of resources; therefore, the choice of a proper and efficient methodology is fundamental to maximize the cost-benefit ratio. Both direct and indirect methods can be used to survey mammals, but the latter are preferred due to the difficulty to come in sight of and/or to capture the individuals, besides being cheaper. We compared the performance of two methods to survey medium and large-sized mammal: track plot recording and camera trapping, and their costs were assessed. At Jatai Ecological Station (S21 degrees 31`15 ``- W47 degrees 34`42 ``-Brazil) we installed ten camera traps along a dirt road directly in front of ten track plots, and monitored them for 10 days. We cleaned the plots, adjusted the cameras, and noted down the recorded species daily. Records taken by both methods showed they sample the local richness in different ways (Wilcoxon, T=231; p;;0.01). The track plot method performed better on registering individuals whereas camera trapping provided records which permitted more accurate species identification. The type of infra-red sensor camera used showed a strong bias towards individual body mass (R(2)=0.70; p=0.017), and the variable expenses of this method in a 10-day survey were estimated about 2.04 times higher compared to track plot method; however, in a long run camera trapping becomes cheaper than track plot recording. Concluding, track plot recording is good enough for quick surveys under a limited budget, and camera trapping is best for precise species identification and the investigation of species details, performing better for large animals. When used together, these methods can be complementary.

Demonstration of Solar Heating and Cooling System using Sorption Integrated Solar Thermal Collectors

Producing cost-competitive small and medium-sized solar cooling systems is currently a significant challenge. Due to system complexity, extensive engineering, design and equipment costs; the installation costs of solar thermal cooling systems are prohibitively high. In efforts to overcome these limitations, a novel sorption heat pump module has been developed and directly integrated into a solar thermal collector. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum with no moving parts. A 5.6m2 aperture area outdoor laboratory-scale system of sorption module integrated solar collectors was installed in Stockholm, Sweden and evaluated under constant re-cooling and chilled fluid return temperatures in order to assess collector performance. Measured average solar cooling COP was 0.19 with average cooling powers between 120 and 200 Wm-2 collector aperture area. It was observed that average collector cooling power is constant at daily insolation levels above 3.6 kWhm-2 with the cooling energy produced being proportional to solar insolation. For full evaluation of an integrated sorption collector solar heating and cooling system, under the umbrella of a European Union project for technological innovation, a 180 m2 large-scale demonstration system has been installed in Karlstad, Sweden. Results from the installation commissioned in summer 2014 with non-optimised control strategies showed average electrical COP of 10.6 and average cooling powers between 140 and 250 Wm-2 collector aperture area. Optimisation of control strategies, heat transfer fluid flows through the collectors and electrical COP will be carried out in autumn 2014.

Temperature Dynamics Investigation At Small And Shallow Lakes Using Hydrodynamic Model

A three-dimensional time-dependent hydrodynamic and heat transport model of Lake Binaba, a shallow and small dam reservoir in Ghana, emphasizing the simulation of dynamics and thermal structure has been developed. Most numerical studies of temperature dynamics in reservoirs are based on one- or two-dimensional models. These models are not applicable for reservoirs characterized with complex flow pattern and unsteady heat exchange between the atmosphere and water surface. Continuity, momentum and temperature transport equations have been solved. Proper assignment of boundary conditions, especially surface heat fluxes, has been found crucial in simulating the lake’s hydrothermal dynamics. This model is based on the Reynolds Average Navier-Stokes equations, using a Boussinesq approach, with a standard k − ε turbulence closure to solve the flow field. The thermal model includes a heat source term, which takes into account the short wave radiation and also heat convection at the free surface, which is function of air temperatures, wind velocity and stability conditions of atmospheric boundary layer over the water surface. The governing equations of the model have been solved by OpenFOAM; an open source, freely available CFD toolbox. As its core, OpenFOAM has a set of efficient C++ modules that are used to build solvers. It uses collocated, polyhedral numerics that can be applied on unstructured meshes and can be easily extended to run in parallel. A new solver has been developed to solve the hydrothermal model of lake. The simulated temperature was compared against a 15 days field data set. Simulated and measured temperature profiles in the probe locations show reasonable agreement. The model might be able to compute total heat storage of water bodies to estimate evaporation from water surface.

The good, the bad and the ugly: estudo sobre pequenas e médias empresas familiares brasileiras a partir da teoria da ação de Pierre Bourdieu

According to Bourdieu (1994), there are social camps where the economic logic works upside down. Therefore, the expression ¿family business¿ is paradoxical because inside it resides two distinct and, sometimes, antagonistic logics: the business logic, whose goal is the profit, and the family logic, which aims at the common welfare. That is why one must consider the symbolical exchanges influences on the social relations more than in any other kind of company. Based on these concepts, this research presents an overview of the small and medium brazilian family business universe.