Effects Of The Length Of A Cylindrical Solid Shield On The Entrainment Of Ambient Air Into Turbulent And Laminar Impinging Argon Plasma Jets

When materials processing is conducted in air surroundings by use of an impinging plasma jet, the ambient air will be entrained into the materials processing region, resulting in unfavorable oxidation of the feedstock metal particles injected into the plasma jet and of metallic substrate material. Using a cylindrical solid shield may avoid the air entrainment if the shield length is suitably selected and this approach has the merit that expensive vacuum chamber and its pumping system are not needed. Modeling study is thus conducted to reveal how the length of the cylindrical solid shield affects the ambient air entrainment when materials processing (spraying, remelting, hardening, etc.) is conducted by use of a turbulent or laminar argon plasma jet impinging normally upon a flat substrate in atmospheric air. It is shown that the mass flow rate of the ambient air entrained into the impinging plasma jet cannot be appreciably reduced unless the cylindrical shield is long enough. In order to completely avoid the air entrainment, the gap between the downstream-end section of the cylindrical solid shield and the substrate surface must be carefully selected, and the suitable size of the gap for the turbulent plasma jet is appreciably larger than that for the laminar one. The overheating of the solid shield or the substrate could become a problem for the turbulent case, and thus additional cooling measure may be needed when the entrainment of ambient air into the turbulent impinging plasma jet is to be completely avoided.

Effects of physical parameter range on dimensionless variable sensitivity in water flooding reservoirs

The similarity criterion for water flooding reservoir flows is concerned with in the present paper. When finding out all the dimensionless variables governing this kind of flow, their physical meanings are subsequently elucidated. Then, a numerical approach of sensitivity analysis is adopted to quantify their corresponding dominance degree among the similarity parameters. In this way, we may finally identify major scaling law in different parameter range and demonstrate the respective effects of viscosity, permeability and injection rate.

Investigation on mechanical properties and size effect of nanocrystalline twin copper

The stress-strain relations of nanocrystalline twin copper with variously sized grains and twins are studied by using FEM simulations based on the conventional theory of mechanism-based strain gradient plasticity (CMSG). A model of twin lamellae strengthening zone is proposed and a cohesive interface model is used to simulate grain-boundary sliding and separation. Effects of material parameters on stress-strain curves of polycrystalline twin copper are studied in detail. Furthermore, the effects of both twin lamellar spacing and twin lamellar distribution on the stress-strain relations are investigated under tension loading. The numerical simulations show that both the strain gradient effect and the material hardening increase with decreasing the grain size and twin lamellar spacing. The distribution of twin lamellae has a significant influence on the overall mechanical properties, and the effect is reduced as both the grain size and twin lamellar spacing decrease. Finally, the FEM prediction results are compared with the experimental data.

Effects of Thermocapillary Convection on the Growth Process in Industrial 8-inch Silicon Czochralski Growth

Czochralski (CZ) crystal growth process is a widely used technique in manufacturing of silicon crystals and other semiconductor materials. The ultimate goal of the IC industry is to have the highest quality substrates, which are free of point defect, impurities and micro defect clusters. The scale up of silicon wafer size from 200 mm to 300 mm requires large crucible size and more heat power. Transport phenomena in crystal growth processes are quite complex due to melt and gas flows that may be oscillatory and/or turbulent, coupled convection and radiation, impurities and dopant distributions, unsteady kinetics of the growth process, melt crystal interface dynamics, free surface and meniscus, stoichiometry in the case of compound materials. A global model has been developed to simulate the temperature distribution and melt flow in an 8-inch system. The present program features the fluid convection, magnetohydrodynamics, and radiation models. A multi-zone method is used to divide the Cz system into different zones, e.g., the melt, the crystal and the hot zone. For calculation of temperature distribution, the whole system inside the stainless chamber is considered. For the convective flow, only the melt is considered. The widely used zonal method divides the surface of the radiation enclosure into a number of zones, which has a uniform distribution of temperature, radiative properties and composition. The integro-differential equations for the radiative heat transfer are solved using the matrix inversion technique. The zonal method for radiative heat transfer is used in the growth chamber, which is confined by crystal surface, melt surface, heat shield, and pull chamber. Free surface and crystal/melt interface are tracked using adaptive grid generation. The competition between the thermocapillary convection induced by non-uniform temperature distributions on the free surface and the forced convection by the rotation of the crystal determines the interface shape, dopant distribution, and striation pattern. The temperature gradients on the free surface are influenced by the effects of the thermocapillary force on the free surface and the rotation of the crystal and the crucible.

The effects of capillary force in micro or nano-indentation

Models describing wet adhesion between indenters and substrates joined by liquid bridges are investigated. The influences of indenter shapes and various parameters of structures on capillary force are focused. In the former, we consider several shapes, such as conical, spherical and truncated conical indenter with a spherical end. In the latter, the effects of the contact angle, the environmental humidity, the gap between the indenter and the substrate, etc. are included. Different dependences of the capillary force on the indenter shapes and the geometric parameters are observed. Most interesting finding is that applying the present results to micro- and nano-indentation experiments shows the size effect in indentation hardness not produced but underestimated by the effects of capillary force.(4 refs)

Interface cracking and particulate size effect in particle-reinforced metal-matrix composites

The mechanical behaviors of the ceramic particle-reinforced metal matrix composites are modeled based on the conventional theory of mechanism-based strain gradient plasticity presented by Huang et al. Two cases of interface features with and without the effects of interface cracking will be analyzed, respectively. Through comparing the result based on the interface cracking model with experimental result, the effectiveness of the present model can be evaluated. Simultaneously, the length parameters included in the strain gradient plasticity theory can be obtained.

Size-dependent elastic properties of Ni nanofilms by molecular dynamics simulation

Size-dependent elastic properties of Ni nanofilms are investigated by molecular dynamics ( MD) simulations with embedded atom method (EAM). The surface effects are considered by calculating the surface relaxation, surface energy, and surface stress. The Young's modulus and yield stress are obtained as functions of thickness and crystallographic orientation. It is shown that the surface relaxation has important effects on the the elastic properties at nanoscale. When the surface relaxation is outward, the Young's modulus decreases with the film thickness decreasing, and vice versa. The results also show that the yield stresses of the films increase with the films becoming thinner. With the thickness of the nanofilms decreasing, the surface effects on the elastic properties become dominant.

The surface- and size-dependent elastic moduli of nanostructures

A theoretical model is presented to investigate the size-dependent elastic moduli of nanostructures with the effects of the surface relaxation surface energy taken into consideration. At nanoscale, due to the large ratios of the surface-to-volume, the surface effects, which include surface relaxation surface energy, etc., can play important roles. Thus, the elastic moduli of nanostructures become surface- and size-dependent. In the research, the three-dimensional continuum model of the nanofilm with the surface effects is investigated. The analytical expressions of five nonzero elastic moduli of the nanofilm are derived, and then the dependence of the elastic moduli is discussed on the surface effects and the characteristic dimensions of nanofilms.

Effects of the Maryland hydraulic clam dredge on populations of the soft-shell clam, Mya arenaria: final contract report

Final report on a three year study designed to investigate the effects of the Maryland hydraulic escalator clam dredge on populations and recruitment of the soft-shell clam, Mya arenaria. Experimental plots were established in the Potomac river, Maryland, and were dredged ina commerical manner by removing only legal size clams. quarterly samples were taken in the experimental and control plots by means of a van Veen grab for juvenile clams and the hydraulic dredge for older, deeper burrowing clams. Sediment samples were taken at selected periods for organic carbon and grain size analysis. Clams were separated into two size-groups. (PDF contains 38 pages)

The Effects of Salinity, Temperature, and Food on the Growth and Reproductive Output of Polydora nuchalis Woodick, 1953

Polydora nuchalis Woodwick, 1953 (Polychaeta: Spionidae) is a protandric hermaphrodite commonly inhabiting intertidal mud flats in southern California. The species exhibits lecithotrophic larval development and adelphophagia. Reproduction of P. nuchalis was monitored for a year at four sites: Catalina Harbor, San Gabriel River, Huntington Harbour, and Malibu Lagoon. Females deposited from 11 to 31 egg capsules in their tubes, with up to 230 eggs per capsule. An average of 3% of the eggs developed into larvae: the remaining were nurse eggs serving as food for the developing larvae. Reproductive output was quantified by determining the number and size of larvae and nurse eggs for individual capsules. Significant differences among the four populations were found for all the quantified variables. In addition, two size classes of nurse eggs were found to exist in capsules from all of the sites. Egg capsules were found throughout the year at San Gabriel River, but none were found during the winter months at the remaining three sites. Size/frequency data for juveniles and adults of the Catalina Harbor population indicate an annual cycle of recruitment. The laboratory experiment consisted of a 3 x 3 x 2 £actor1al design with replication testing the effects of temperature, salinity, and food supply on growth and reproduction of P. nuchalis. Increasing temperature resulted in significantly increased survivorship, growth rates, and percentage reproduction. It also produced a significant decrease in the size of the nurse eggs and the volume of food per larva. The number of egg capsules was maximum at the intermediate temperature. Increasing the salinity resulted in significant increases in survivorship and Class I nurse egg size. Increaaing food availability produced a significant increase in the percentage of worms reproducing. The interactive effect of salinity and £ood level produced significant changes in the number of larvae per capsule and the number of nurse eggs per capsule. However, the number of nurse eggs per larva did not differ significantly among the experimental treatment groups. (PDF contains 129 pages)

Changes in the size structure of the yellowfin tuna population of the tropical eastern Pacific Ocean from 1947 to 1955

ENGLISH: Morphometric studies by Godsil (1948), Godsil and Greenhood (1951), Royce (1953) and Schaefer (1952, 1955) have indicated that the yellowfin tuna of the Eastern Pacific are distinct from those of the Central Pacific. Tagging of yellowfin tuna by the California Department of Fish and Game, and by the Inter-American Tropical Tuna Commission in the Eastern Pacific, and by the Pacific Oceanic Fishery Investigations in the Central Pacific, have not yet revealed any migrations between these areas. Shimada and Schaefer (1956) have compared changes in population abundance and fishing intensity, considering the population in the Eastern Pacific as a separate entity. They conclude " ... the amount of fishing has had a real effect upon the stock of Eastern Pacific yellowfin tuna, taken in the aggregate, over the period studied. The evidence suggests also that for this species the intensity of fishing in some recent years has reached and might have even exceeded the level corresponding to the maximum equilibrium yield." Tagging experiments by the California Department of Fish and Game and by the Inter-American Tropical Tuna Commission have yielded returns in the order of one to five percent (Roedel 1954, and unpublished data of both agencies), a level much lower than that at which fishing intensity would be expected to noticeably affect the population size. These results are probably a reflection of the inadequacies of the present tagging methods, but they could lend doubt to the conclusions of Shimada and Schaefer. It is desirable, therefore, to examine other, independent, evidence as to the effects of fishing on the population. At the high levels of fishing intensity suggested by Shimada and Schaefer, in addition to changes in quantity, measurable changes would be expected to have occurred in the quality of the yellowfin tuna stocks, because the average age and size of the fish would have been reduced by the high mortality rates accompanying high fishing intensities. A continuing regular program of sampling catches and determining their length composition, to assess changes in the size composition of the stocks, was initiated by the Commission in 1954 but direct measurements are not available for the earlier, more dynamic period of growth of the fishery. Consequently, other, more general indications of possible changes in the size composition were sought. SPANISH: Los estudios morfométricos efectudos por Godsil (1948), Godsil y Greenhood (1951), Royce (1953) y Schaefer (1952, 1955), han demostrado que el atún aleta amarilla del Pacífico Oriental es distinto del que habita el PacÍfico Central. Los experimentos del Departamento de Pesca y Caza de California y de la Comisión Interamericana del Atún Tropical en el Pacífico Oriental, así como los de las Investigaciones Pesqueras del Océano Pacífico en el Pacífico Central,consistentes en la marcación de atunes aleta amarilla, aún no han puesto de manifiesto movimientos migratorios entre dichas áreas. Shimada y Schaefer (1956) han hecho estudios comparativos sobre la abundancia de la población y la intensidad de la pesca, considerando a la población del Pacífico Oriental como una entidad separada. Su conclusión es que " ... la intensidad de la pesca ha tenido un definido efecto sobre la población del atún aleta amarilla del Pacífico Oriental, tomada en conjunto, a lo largo del período estudiado. La evidencia de que se dispone sugiere así mismo que, por lo que hace a esta especie, la intensidad de la pesca en los últimos años ha alcanzado y quizás aún sobrepasado el nivel correspondiente a la máxima pesca de equilibrio". Los experimentos de mar•cación del Departamento de Pesca y Caza de California y de la Comisión Interamericana del Atún Tropical han producido recuperaciones ,entre el uno y el cinco por ciento (Roedel 1954 y datos inéditos de ambos organismos), lo que constituye un nivel mucho más bajo de aquél en que la intensidad de la pesca podría considerarse que afectaría notablemente el tamaño de la población. Estos resultados reflejan probablemente lo inadecuados que son aún los métodos de marcación, pero ellos podrían, quizá, poner en tela de juicio las conclusiones de Shimada y Schaefer. Por lo tanto,es deseable examinar otras fuentes de evidencia independientes, relacionadas con el efecto que la pesca tiene sobre la población. En efecto, si los altos índices de pesca sugeridos por Shimada y Schaefer son correctos, es de esperar que, además de los cambios en la magnitud de la población, se hayan producido otros, concomitantes y sensibles, en la calidad de los stocks de atún aleta amarilla, puesto que tanto el promedio de edad como el de tamaño de los individuos habrían disminuído debido a las elevadas tasas de mortalidad inherentes a las altas intensidades de pesca. En 1954 la Comisión inició un programa ininterrumpido para tomar muestras y determinar en ellas las frecuencias de tallas y evaluar de este modo los cambios correlativos que tuvieran lugar en los stocks pero, infortunadamente, este sistema de evaluación directa no fué practicado en el período anterior, que fué precisamente el de rápida expansión de la pesquería. En tal virtud, hubo de ser necesario buscar indicios más generales referentes a los cambios posibles en la composición de tamaños. (PDF contains 20 pages.)

Effects of temperature on the biology of the northern shrimp, Pandalus borealis, in the Gulf of Maine

Length-frequency data collected from inshore and offshore locations in the Gulf of Maine in 1966-1968 indicated that ovigerous female northern shrimp (Pandalus borealis) first appeared offshore in August and September and migrated inshore in the fall and winter. Once eggs hatched, surviving females returned offshore. Juveniles and males migrated offshore during their first two years of life. Sex transition occurred in both inshore and oll'shore waters, but most males changed sex offshore during their third and fourth years. Most shrimp changed sex and matured as females for the first time in their fourth year. Smaller females and females exposed to colder bottom temperatures spawned first. The incidence of egg parasitism peaked in January and was higher for shrimp exposed to warmer bottom temperatures. Accelerated growth at higher temperatures appeared to result in earlier or more rapid sex transition. Males and non-ovigerous females were observed to make diurnal vertical migrations, but were not found in near- surface waters where the temperature exceeded 6°C. Ovigerous females fed more heavily on benthic molluscs in inshore waters in the winter, presumably because the egg masses they were carrying prevented them from migrating vertically at night. Northern shrimp were more abundant in the southwestern region of the Gulf of Maine where bottom temperatures remain low throughout the year. Bottom trawl catch rates were highest in Jeffreys Basin where bottom temperatures were lower than at any other sampling location. Catch rates throughout the study area were inversely related to bottom temperature and reached a maximum at 3°C. An increase of 40% in fecundity between 1973 and 1979 was associated with a decline of 2-3°C in April-July offshore bottom temperatures. Furthermore, a decrease in mean fecundity per 25 mm female between 1965 and 1970 was linearly related to reduced landings between 1969 and 1974. It is hypothesized that temperature-induced changes in fecundity and, possibly, in the extent of egg mortality due to parasitism, may provide a mechanism which could partially account for changes in the size of the Gulf of Maine northern shrimp population during the last thirty years. (PDF file contains 28 pages.)

Group size and decision rules in legislative bargaining

We conduct experiments to investigate the effects of different majority requirements on bargaining outcomes in small and large groups. In particular, we use a Baron-Ferejohn protocol and investigate the effects of decision rules on delay (number of bargaining rounds needed to reach agreement) and measures of "fairness" (inclusiveness of coalitions, equality of the distribution within a coalition). We find that larger groups and unanimity rule are associated with significantly larger decision making costs in the sense that first round proposals more often fail, leading to more costly delay. The higher rate of failure under unanimity rule and in large groups is a combination of three facts: (1) in these conditions, a larger number of individuals must agree, (2) an important fraction of individuals reject offers below the equal share, and (3) proposers demand more (relative to the equal share) in large groups.

Size- And Temperature-Dependent Thermal Expansion Coefficient Of A Nanofilm

The thermal expansion coefficient (TEC) of an ideal crystal is derived by using a method of Boltzmann statistics. The Morse potential energy function is adopted to show the dependence of the TEC on the temperature. By taking the effects of the surface relaxation and the surface energy into consideration, the dimensionless TEC of a nanofilm is derived. It is shown that with decreasing thickness, the TEC can increase or decrease, depending on the surface relaxation of the nanofilm.

The effects of surface tension on the elastic properties of nano structures

In the absence of external loading, surface tension will induce a residual stress field in the bulk of nano structures. However, in the prediction of mechanical properties of nano structures, the elastic response of the bulk is usually described by classical Hooke’s law, in which the aforementioned residual stress was neglected in the existing literatures. The present paper investigates the influences of surface tension and the residual stress in the bulk induced by the surface tension on the elastic properties of nano structures. We firstly present the surface elasticity in the Lagrangian and the Eulerian descriptions and point out that even in the case of infinitesimal deformations the reference and the current configurations should be discriminated; otherwise the out-plane terms of surface displacement gradient, associated with the surface tension, may sometimes be overlooked in the Eulerian descriptions, particularly for curved and rotated surfaces. Then, the residual stress in the bulk is studied through the non-classical boundary conditions and used to construct the linear elastic constitutive relations for the bulk material. Finally, these relations are adopted to analyze the size-dependent properties of pure bending of Al nanowires. The present results show that surface tension will considerably affect the effective Young’s modulus of Al nanowires, which decrease with either the decrease of nanowires thickness or the increase of the aspect ratio.