Adhesive Quality of Self-adhesive and Conventional Adhesive Resin Cement to Y-TZP Ceramic Before and After Aging Conditions

Purpose: This study evaluated the adhesive quality of simplified self-adhesive and conventional resin cements to Y-TZP in dry and aged conditions. Methods: Y-TZP ceramic blocks (N=192) (5 x 5 x 2 mm) were embedded in acrylic resin and randomly divided into two groups, based on surface conditioning: 96% isopropanol or chairside tribochemical silica coating and silanization. Conditioned ceramics were divided into four groups to receive the resin cements (Panavia F 2.0, Variolink II, RelyX U100 and Maxcem). After 24 hours, half of the specimens (n=12) from each group were submitted to shear bond strength testing (0.5 nun/minute). The remaining specimens were tested after 90 days of water storage at 37 degrees C and thermocycling (12,000x, 5 degrees C-55 degrees C). Failure types were then assessed. The data were analyzed using three-way ANOVA and the Tukey's test (alpha=0.05). Results: Significant effects of ceramic conditioning, cement type and storage conditions were observed (p<0.0001). The groups cleaned using alcohol only showed low bond strength values in dry conditions and the bond strength was reduced dramatically after aging. Groups conditioned using silica coating and silanization showed higher bond strengths both in dry and aged conditions. A high number of specimens failed prematurely prior to testing when they were cleaned using 96% isopropanol. Conclusion: Overall, silica coating and silanization showed higher, stable bond strengths with and without aging. The durability of resin-ceramic adhesion varied, depending on the adhesive cement type.

Review of Fluconazole Properties and Analytical Methods for Its Determination

Fluconazole, -(2.4-diflurofenil)--(1H-triazol-1-methyl)-1H-1,2,4-triazol-1-ethanol, is an antifungal of triazoles class. It shows activity against species of Candida sp., and it is indicated in cases of oropharyngeal candidiasis, esophageal, vaginal, and deep infection. Fluconazole is a selective inhibitor of ergosterol, a steroid exclusive of the cell membrane of fungal cells. Fluconazole is highly absorbed by the gastrointestinal tract, and it spreads easily by body fluids. The main adverse reactions related to the use of fluconazole are nausea, vomiting, headache, rash, abdominal pain, diarrhea, and alopecia in patients undergoing prolonged treatment with a dose of 400 mg/day. In the form of raw material, pharmaceutical formulations, or biological material, fluconazole can be determined by methods such as titration, spectrophotometry, and thin-layer, gas, and liquid chromatography. This article discusses the pharmacological and physical-chemical properties of fluconazole and also the methods of analysis applied to the determination of the drug.

Head and neck carcinogenesis: Impact of MTHFD1 G1958A polymorphism

Objective: To investigate the MTHFD1 G1958A polymorphism involved in the folate metabolism as a risk for head and neck cancer, and to find the association of the polymorphism with the risk factors and clinical and histopathological characteristics. Methods: Retrospective study investigating MTHFD1 G1958A polymorphism in 694 subjects (240 patients in the Case Group and 454 in the Control Group) by Restriction Fragment Length Polymorphism (RFLP) Analysis. Multiple logistic regression and chi-square tests were used in the statistical analysis. Results: Multivariable analysis showed that smoking and age over 42 years were disease predictors (p < 0.05). MTHFD1 1958GA or AA genotypes were associated with smoking (p = 0.04) and alcoholism (p = 0.03) and were more ofen found in more advanced stage tumors (p = 0.04) and in patients with a shorter survival (p = 0.03). Conclusion: Te presence of MTHFD1 G1948A polymorphism associated with smoking and alcoholism raises the head and neck cancer risk.

Retention and processing methods of nasal prosthesis

Patients with congenital malformations, traumatic or pathological mutilation and maxillofacial developmental disorders can be restored aesthetically and emotionally by the production and use of facial prostheses. The aim of this study was to review the literature about the retention and processing methods of facial prostheses, and discuss their characteristics. A literature review on Medline (PubMed) database was performed by using the keywords maxillofacial prosthesis, silicone, resin, pigment, cosmetic, prosthetic nose, based on articles published from 1956 to 2010. Several methods of retention, from adhesives to the placement of implants, and different processing methods such as laser, CAD/CAM and rapid prototyping technologies have been reported. There are advantages and disadvantages of each procedure, and none can be classified as better compared to others.

Traditional and novel methods for occlusal caries detection: Performance on primary teeth

This study aimed to assess the performance of International Caries Detection and Assessment System (ICDAS), radiographic examination, and fluorescence-based methods for detecting occlusal caries in primary teeth. One occlusal site on each of 79 primary molars was assessed twice by two examiners using ICDAS, bitewing radiography (BW), DIAGNOdent 2095 (LF), DIAGNOdent 2190 (LFpen), and VistaProof fluorescence camera (FC). The teeth were histologically prepared and assessed for caries extent. Optimal cutoff limits were calculated for LF, LFpen, and FC. At the D 1 threshold (enamel and dentin lesions), ICDAS and FC presented higher sensitivity values (0.75 and 0.73, respectively), while BW showed higher specificity (1.00). At the D 2 threshold (inner enamel and dentin lesions), ICDAS presented higher sensitivity (0.83) and statistically significantly lower specificity (0.70). At the D 3 threshold (dentin lesions), LFpen and FC showed higher sensitivity (1.00 and 0.91, respectively), while higher specificity was presented by FC (0.95), ICDAS (0.94), BW (0.94), and LF (0.92). The area under the receiver operating characteristic (ROC) curve (Az) varied from 0.780 (BW) to 0.941 (LF). Spearman correlation coefficients with histology were 0.72 (ICDAS), 0.64 (BW), 0.71 (LF), 0.65 (LFpen), and 0.74 (FC). Inter- and intraexaminer intraclass correlation values varied from 0.772 to 0.963 and unweighted kappa values ranged from 0.462 to 0.750. In conclusion, ICDAS and FC exhibited better accuracy in detecting enamel and dentin caries lesions, whereas ICDAS, LF, LFpen, and FC were more appropriate for detecting dentin lesions on occlusal surfaces in primary teeth, with no statistically significant difference among them. All methods presented good to excellent reproducibility. © 2012 Springer-Verlag London Ltd.

A brief discussion about image quality and SEM methods for quantitative fractography of polymer composites

The methodology for fracture analysis of polymeric composites with scanning electron microscopes (SEM) is still under discussion. Many authors prefer to use sputter coating with a conductive material instead of applying low-voltage (LV) or variable-pressure (VP) methods, which preserves the original surfaces. The present work examines the effects of sputter coating with 25 nm of gold on the topography of carbon-epoxy composites fracture surfaces, using an atomic force microscope. Also, the influence of SEM imaging parameters on fractal measurements is evaluated for the VP-SEM and LV-SEM methods. It was observed that topographic measurements were not significantly affected by the gold coating at tested scale. Moreover, changes on SEM setup leads to nonlinear outcome on texture parameters, such as fractal dimension and entropy values. For VP-SEM or LV-SEM, fractal dimension and entropy values did not present any evident relation with image quality parameters, but the resolution must be optimized with imaging setup, accompanied by charge neutralization. © Wiley Periodicals, Inc.

Nutritional status, biological maturation and cardiorespiratory fitness in Azorean youth aged 11-15 years

Background: Sex and individual differences in biological maturity status can influence height, weight, and body fat. Thus, the rigorous control of these variables seems necessary for estimating overweight and obesity in adolescents. The aims of this study were to estimate the prevalence of overweight and obesity and over-fatness in Azorean adolescents and to examine the contributions of chronological age, sex, estimated maturity status, and cardiorespiratory fitness (CRF) to the risk of overweight and obesity and over-fatness. Methods. The sample comprised 1,206 youth aged 11-15 years (626 boys and 580 girls) from the Azores Islands, Portugal. Body mass, stature, and skinfolds (triceps and subscapular) were measured. Body mass index (BMI) was calculated and percent fat was predicted from skinfolds. Age- and sex-specific IOTF cut-off values of the BMI defined nutritional status. Biological maturation was estimated as present height expressed as a percentage of predicted adult (mature) stature. The CRF was analyzed from the 20-m shuttle run test. Results: The total prevalence rates of overweight/obesity and over-fatness were of 31% and 27%, respectively. Low CRF (unfit) and being average and advanced in maturity status were positively and significantly associated with overweight/obesity and with risk of being over-fatness in both sexes. Conclusions: High prevalence rates of overweight/obesity and over-fatness were identified in Azorean youth, and low CRF and advanced biological maturation were positively associated with overweight/obesity and over-fatness in our sample of adolescents. © 2013 Coelho-e-Silva et al.; licensee BioMed Central Ltd.

A new proposed rodent model of chemically induced prostate carcinogenesis: Distinct time-course prostate cancer progression in the dorsolateral and ventral lobes

Background. Characterization of novel rodent models for prostate cancer studies requires evaluation of either spontaneous and carcinogen-induced tumors as well as tumor incidence in different prostatic lobes. We propose a new short-term rodent model of chemically induced prostate carcinogenesis in which prostate cancer progression occurs differentially in the dorsolateral and ventral lobes. Methods. Adult gerbils were treated with MNU alone or associated with testosterone for 3 or 6 months of treatment. Tumor incidence, latency, localization, and immunohistochemistry (AR, PCNA, smooth muscle α-actin, p63, MGMT, and E-cadherin) were studied in both lobes. Results. Comparisons between both lobes revealed that lesions developed first in the DL while the VL presented longer tumor latency. However, after 6 months, there was a dramatic increase in tumor multiplicity in the VL, mainly in MNU-treated groups. Lesions clearly progressed from a premalignant to a malignant phenotype over time and tumor latency was decreased by MNU + testosterone administration. Three-dimensional reconstruction of the prostatic complex showed that the DL developed tumors exclusively in the periurethral area and showed intense AR, PCNA, and MGMT immunostaining. Moreover, VL lesions emerged throughout the entire lobe. MNU-induced lesions presented markers indicative of an aggressive phenotype: lack of basal cells, rupture of the smooth muscle cell layer, loss of E-cadherin, and high MGMT staining. Conclusions. There are distinct pathways involved in tumor progression in gerbil prostate lobes. This animal provides a good model for prostate cancer since it allows the investigation of advanced steps of carcinogenesis with shorter latency periods in both lobes. Copyright © 2013 Wiley Periodicals, Inc.

Using baseline methods to identify non-technical losses in the context of smart grids

Demand response has gained increasing importance in the context of competitive electricity markets and smart grid environments. In addition to the importance that has been given to the development of business models for integrating demand response, several methods have been developed to evaluate the consumers' performance after the participation in a demand response event. The present paper uses those performance evaluation methods, namely customer baseline load calculation methods, to determine the expected consumption in each period of the consumer historic data. In the cases in which there is a certain difference between the actual consumption and the estimated consumption, the consumer is identified as a potential cause of non-technical losses. A case study demonstrates the application of the proposed method to real consumption data. © 2013 IEEE.

Development of diagnostic methods and study of the immunoreactivity of a mixture of recombinant core and E2 proteins fused to GST with control serum positive for hepatitis C

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and chemical matrix effects in soil carbon quantification using laser-induced breakdown spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of reducing acid etching time on bond strength to noncarious and caries-affected primary and permanent dentin

The purpose was to evaluate the effect of acid etching time on the bond strength of a simplified etch-and-rinse adhesive system to noncarious and caries-affected dentin of primary and permanent teeth. Methods: Twenty-four extracted primary and permanent teeth were divided into three groups, according to the acid etching time. Four teeth from each group were exposed to a microbiological caries-inducing protocol. After caries removal, noncarious and caries-affected dentin surfaces were etched with 37 percent phosphoric acid for five, 10, or 15 seconds prior to the application of Prime & Bond NT adhesive. Crowns were restored with resin composite and prepared for microtensile testing. Data were submitted to Kruskal-Wallis and Mann-Whitney tests (á=0.05). Results: Higher bond strengths were obtained for noncarious dentin vs. cariesaffected dentin for both primary and permanent teeth. Reducing the acid etching time from 15 to five seconds did not affect the bond strength to caries-affected or noncarious dentin in primary teeth. For permanent teeth, lower bond strength values were observed when the noncarious dentin was etched for five seconds, while no difference was seen between 10 and 15 seconds. Conclusions: For Prime & Bond NT, the etching of dentin for five seconds could be recommended for primary teeth, while 10 seconds would be the minimum time for permanent teeth.

Doxycycline hyclate: a review of properties, applications and analytical methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Detection Methods for the Genus Lysobacter and the Species Lysobacter enzymogenes

Strains of Lysobacter enzymogenes, a bacterial species with biocontrol activity, have been detected via 16S rDNA sequences in soil in different parts of the world. In most instances, however, their occurrence could not be confirmed by isolation, presumably because the species occurred in low numbers relative to faster-growing species of Bacillus or Pseudomonas. In this study, we developed DNA-based detection and enrichment culturing methods for Lysobacter spp. and L. enzymogenes specifically. In the DNA-based method, a region of 16S rDNA conserved among Lysobacter spp. (L4: GAG CCG ACG TCG GAT TAG CTA GTT), was used as the forward primer in PCR amplification. When L4 and universal bacterial primer 1525R were used to amplify DNA from various bacterial species, an 1100-bp product was found in Lysobacter spp. exclusively. The enrichment culturing method involved culturing soils for 3 days in a chitin-containing broth amended with antibiotics. Bacterial strains in the enrichment culture were isolated on yeast-cell agar and then identified by 16S rDNA sequence analysis. A strain of L. enzymogenes added to soils was detected at populations as low as 102 and 104 CFU/g soil by PCR amplification and enrichment culturing, respectively. In a survey of 58 soil samples, Lysobacter was detected in 41 samples by PCR and enrichment culture, out of which 6 yielded strains of Lysobacter spp. by enrichment culture. Among isolated strains, all were identified to be L. enzymogenes, with the exception of a strain of L. antibioticus. Although neither method alone is completely effective at detecting L. enzymogenes, they are complementary when used together and may provide new information on the spatial distribution of the species in soil.

Microbiological quality and safety of minimally processed vegetables marketed in Campinas, SP-Brazil, as assessed by traditional and alternative methods

In this study, a total of 172 samples of minimally processed vegetables (MPV) were collected from supermarkets in the city of Campinas, Brazil. The MPV were analyzed using traditional and/or alternative methods for total aerobic mesophilic bacteria, total coliforms, Escherichia coil, coagulase positive staphylococci, Salmonella and Listeria monocytogenes. All the MPV analyzed presented populations of aerobic mesophilic microorganisms and total coliforms were >4 log(10) CFU/g and 1.0-3.4 log(10) CFU/g, respectively. E. coil was enumerated in only 10 samples out of 172 collected, while none of the 172 samples of MPV presented contamination by coagulase positive Staphylococcus (<10(1) CFU/g). Among the four methods used for detection of Salmonella in MPV (Vidas, 1,2 Test, Reveal, and Traditional), when Reveal was used a total of 29 positive samples were reported. For L monocytogenes, the four methods tested (Vidas, Vip, Reveal, and traditional) performed similarly. The presence of Salmonella and L monocytogenes in MPV was confirmed in one (watercress) and two samples (watercress and escarole), respectively. In conclusion, it has been observed that the microbiological quality of MPV commercialized in Campinas is generally satisfactory. Besides, the choice of microbiological method should be based not only on resource and time issues, but also on parameters such as sensitivity and specificity for the specific foods under ahalysis. (C) 2012 Elsevier Ltd. All rights reserved.