Runoff and sediment production in a Mediterranean basin under two different land uses

This study analyses the infl uence of two diff erent land uses on the hydrology of the Vernegà experimental basin between the years 2005 and 2009. It is located in the Northeast of the Iberian Peninsula and is infl uenced by a Mediterranean climate, with an average annual rainfall of 646 mm. The study of rainfall distributi on in the 1982 to 2009 period shows that the majority occurs during autumn, winter, and spring representi ng 33.2%, 25.5%, and 25.7% respecti vely of the total annual rainfall. Surface runoff is concentrated from October to June. Between 2005 and 2009, total runoff was 242.38 mm at the"Bosc" gauging stati on, which drains an area of 1.60 km2, and 298.54 mm at the"Campàs" gauging stati on, which drains an area of 2.57 km2 and is located at the outlet of the basin. More than 80% of the total surface runoff yielded during the study period corresponds to the 2005-2006 hydrologic year. Finally, Campàs gauging stati on registers a higher total runoff than Bosc gauging stati on. Part of this phenomenon may be due to the intercepti on of rainfall and plant biomass in the forested area of the basin. In relati on to the sediment yield, an overall increase in the two basins has been detected. Recent forest management practi ces undertaken in the catchment area are considered to be one of the most important reasons for this change.

Jälkikäsitellyn jätevesikirkasteen uusiokäyttö Anjalan paperitehtailla

Työssä tarkasteltiin aktiivilietelaitoksen jätevesikirkasteen uusiokäyttöä Anjalan paperitehtailla. Tavoitteena oli löytää keino jätevesimäärän vähentämiseksi, kierrättämällä jatkokäsiteltyä jätevesikirkastetta. Työssä tehtiin prosessisuunnitelma kirkasteen kierrättämiseksi; suunnitelman vaikutuksia arvioitiin kirjallisuuden, simuloinnin ja arkkikokeiden avulla. Lisäksi arvioitiin kierrätyksen taloudellisia näkökohtia. Prosessisuunnittelussa päädyttiin vaihtoehtoon, jossa tehtaan nykyinen tehdasvesijae korvataan jälkikäsitellyllä jätevesikirkasteella. Esitetty prosessimuutos vähentäisi jokeen laskettavan kirkasteen määrää 20 %. Haitta-ainetason muutoksia selvitettiin simuloimalla prosessisuunnitelman mukainen suolatase. Simuloinnin kohteena oli haitta-ainetason muutokset PK3:lla. Tuloksista pääteltiin, että PK3:lla tapahtuu normaalissa ajotilanteessa suurempia muutoksia suolatasoissa kuin prosessimuutoksen aiheuttama suolatason muutos. Arkkikokeilla selvitettiin kirkasteen ja tehdasveden vaikutuksia PK3:n massan vaaleuteen ja vaaleuden pysyvyyteen. Kirkasteen vaikutus massan vaaleuteen oli suurempi kuin tehdasvedellä, kun kirkastetta oli käsitelty tehdasmittakaavan flotaatiolla ja hiekkasuodatuksella. Pilot-mittakaavan hiekkasuodatuksella ja laboratoriomittakaavassa laskeutetulla kirkasteella oli pienempi vaikutus arkkien vaaleuteen kuin tehdasvedellä. Vaaleuden pysyvyydessä ei havaittu eroa kirkasteen ja tehdasveden välillä. Kirkasteella oli voimakas vaikutus arkkien keltaisuuteen. Tehdasvesi ei vaikuttanut arkkien keltaisuuteen. Mikäli prosessisuunnitelman mukainen kirkastevirtaus jatkokäsiteltäisiin hiekkasuodatuksella, arvioitiin päälaitteista kerroinmenetelmällä tehdasinvestoinniksi 5.20 milj. euroa. Vuosittaisiksi kemikaalikustannuksiksi arvioitiin 0.21 milj. euroa ja teoreettiseksi energiasäästöksi 0.87 milj. euroa.

Three-dimensional hydrodynamic numerical modelling of fold nappe formation, basement-cover deformation and slab detachment with applications to the helvetic nappe system (W Switzerland)

Many three-dimensional (3-D) structures in rock, which formed during the deformation of the Earth's crust and lithosphere, are controlled by a difference in mechanical strength between rock units and are often the result of a geometrical instability. Such structures are, for example, folds, pinch-and-swell structures (due to necking) or cuspate-lobate structures (mullions). These struc-tures occur from the centimeter to the kilometer scale and the related deformation processes con-trol the formation of, for example, fold-and-thrust belts and extensional sedimentary basins or the deformation of the basement-cover interface. The 2-D deformation processes causing these structures are relatively well studied, however, several processes during large-strain 3-D defor-mation are still incompletely understood. One of these 3-D processes is the lateral propagation of these structures, such as fold and cusp propagation in a direction orthogonal to the shortening direction or neck propagation in direction orthogonal to the extension direction. Especially, we are interested in fold nappes which are recumbent folds with amplitudes usually exceeding 10 km and they have been presumably formed by ductile shearing. They often exhibit a constant sense of shearing and a non-linear increase of shear strain towards their overturned limb. The fold axes of the Morcles fold nappe in western Switzerland plunges to the ENE whereas the fold axes in the more eastern Doldenhorn nappe plunges to the WSW. These opposite plunge direc-tions characterize the Rawil depression (Wildstrubel depression). The Morcles nappe is mainly the result of layer parallel contraction and shearing. During the compression the massive lime-stones were more competent than the surrounding marls and shales, which led to the buckling characteristics of the Morcles nappe, especially in the north-dipping normal limb. The Dolden-horn nappe exhibits only a minor overturned fold limb. There are still no 3-D numerical studies which investigate the fundamental dynamics of the formation of the large-scale 3-D structure including the Morcles and Doldenhorn nappes and the related Rawil depression. We study the 3-D evolution of geometrical instabilities and fold nappe formation with numerical simulations based on the finite element method (FEM). Simulating geometrical instabilities caused by sharp variations of mechanical strength between rock units requires a numerical algorithm that can accurately resolve material interfaces for large differences in material properties (e.g. between limestone and shale) and for large deformations. Therefore, our FE algorithm combines a nu-merical contour-line technique and a deformable Lagrangian mesh with re-meshing. With this combined method it is possible to accurately follow the initial material contours with the FE mesh and to accurately resolve the geometrical instabilities. The algorithm can simulate 3-D de-formation for a visco-elastic rheology. The viscous rheology is described by a power-law flow law. The code is used to study the 3-D fold nappe formation, the lateral propagation of folding and also the lateral propagation of cusps due to initial half graben geometry. Thereby, the small initial geometrical perturbations for folding and necking are exactly followed by the FE mesh, whereas the initial large perturbation describing a half graben is defined by a contour line inter-secting the finite elements. Further, the 3-D algorithm is applied to 3-D viscous nacking during slab detachment. The results from various simulations are compared with 2-D resulats and a 1-D analytical solution. -- On retrouve beaucoup de structures en 3 dimensions (3-D) dans les roches qui ont pour origines une déformation de la lithosphère terrestre. Ces structures sont par exemple des plis, des boudins (pinch-and-swell) ou des mullions (cuspate-lobate) et sont présentés de l'échelle centimétrique à kilométrique. Mécaniquement, ces structures peuvent être expliquées par une différence de résistance entre les différentes unités de roches et sont généralement le fruit d'une instabilité géométrique. Ces différences mécaniques entre les unités contrôlent non seulement les types de structures rencontrées, mais également le type de déformation (thick skin, thin skin) et le style tectonique (bassin d'avant pays, chaîne d'avant pays). Les processus de la déformation en deux dimensions (2-D) formant ces structures sont relativement bien compris. Cependant, lorsque l'on ajoute la troisiéme dimension, plusieurs processus ne sont pas complètement compris lors de la déformation à large échelle. L'un de ces processus est la propagation latérale des structures, par exemple la propagation de plis ou de mullions dans la direction perpendiculaire à l'axe de com-pression, ou la propagation des zones d'amincissement des boudins perpendiculairement à la direction d'extension. Nous sommes particulièrement intéressés les nappes de plis qui sont des nappes de charriage en forme de plis couché d'une amplitude plurikilométrique et étant formées par cisaillement ductile. La plupart du temps, elles exposent un sens de cisaillement constant et une augmentation non linéaire de la déformation vers la base du flanc inverse. Un exemple connu de nappes de plis est le domaine Helvétique dans les Alpes de l'ouest. Une de ces nap-pes est la Nappe de Morcles dont l'axe de pli plonge E-NE tandis que de l'autre côté de la dépression du Rawil (ou dépression du Wildstrubel), la nappe du Doldenhorn (équivalent de la nappe de Morcles) possède un axe de pli plongeant O-SO. La forme particulière de ces nappes est due à l'alternance de couches calcaires mécaniquement résistantes et de couches mécanique-ment faibles constituées de schistes et de marnes. Ces différences mécaniques dans les couches permettent d'expliquer les plissements internes à la nappe, particulièrement dans le flanc inver-se de la nappe de Morcles. Il faut également noter que le développement du flanc inverse des nappes n'est pas le même des deux côtés de la dépression de Rawil. Ainsi la nappe de Morcles possède un important flanc inverse alors que la nappe du Doldenhorn en est presque dépour-vue. A l'heure actuelle, aucune étude numérique en 3-D n'a été menée afin de comprendre la dynamique fondamentale de la formation des nappes de Morcles et du Doldenhorn ainsi que la formation de la dépression de Rawil. Ce travail propose la première analyse de l'évolution 3-D des instabilités géométriques et de la formation des nappes de plis en utilisant des simulations numériques. Notre modèle est basé sur la méthode des éléments finis (FEM) qui permet de ré-soudre avec précision les interfaces entre deux matériaux ayant des propriétés mécaniques très différentes (par exemple entre les couches calcaires et les couches marneuses). De plus nous utilisons un maillage lagrangien déformable avec une fonction de re-meshing (production d'un nouveau maillage). Grâce à cette méthode combinée il nous est possible de suivre avec précisi-on les interfaces matérielles et de résoudre avec précision les instabilités géométriques lors de la déformation de matériaux visco-élastiques décrit par une rhéologie non linéaire (n>1). Nous uti-lisons cet algorithme afin de comprendre la formation des nappes de plis, la propagation latérale du plissement ainsi que la propagation latérale des structures de type mullions causé par une va-riation latérale de la géométrie (p.ex graben). De plus l'algorithme est utilisé pour comprendre la dynamique 3-D de l'amincissement visqueux et de la rupture de la plaque descendante en zone de subduction. Les résultats obtenus sont comparés à des modèles 2-D et à la solution analytique 1-D. -- Viele drei dimensionale (3-D) Strukturen, die in Gesteinen vorkommen und durch die Verfor-mung der Erdkruste und Litosphäre entstanden sind werden von den unterschiedlichen mechani-schen Eigenschaften der Gesteinseinheiten kontrolliert und sind häufig das Resulat von geome-trischen Istabilitäten. Zu diesen strukturen zählen zum Beispiel Falten, Pich-and-swell Struktu-ren oder sogenannte Cusbate-Lobate Strukturen (auch Mullions). Diese Strukturen kommen in verschiedenen Grössenordungen vor und können Masse von einigen Zentimeter bis zu einigen Kilometer aufweisen. Die mit der Entstehung dieser Strukturen verbundenen Prozesse kontrol-lieren die Entstehung von Gerbirgen und Sediment-Becken sowie die Verformung des Kontaktes zwischen Grundgebirge und Stedimenten. Die zwei dimensionalen (2-D) Verformungs-Prozesse die zu den genannten Strukturen führen sind bereits sehr gut untersucht. Einige Prozesse wäh-rend starker 3-D Verformung sind hingegen noch unvollständig verstanden. Einer dieser 3-D Prozesse ist die seitliche Fortpflanzung der beschriebenen Strukturen, so wie die seitliche Fort-pflanzung von Falten und Cusbate-Lobate Strukturen senkrecht zur Verkürzungsrichtung und die seitliche Fortpflanzung von Pinch-and-Swell Strukturen othogonal zur Streckungsrichtung. Insbesondere interessieren wir uns für Faltendecken, liegende Falten mit Amplituden von mehr als 10 km. Faltendecken entstehen vermutlich durch duktile Verscherung. Sie zeigen oft einen konstanten Scherungssinn und eine nicht-lineare zunahme der Scherverformung am überkipp-ten Schenkel. Die Faltenachsen der Morcles Decke in der Westschweiz fallen Richtung ONO während die Faltenachsen der östicher gelegenen Doldenhorn Decke gegen WSW einfallen. Diese entgegengesetzten Einfallrichtungen charakterisieren die Rawil Depression (Wildstrubel Depression). Die Morcles Decke ist überwiegend das Resultat von Verkürzung und Scherung parallel zu den Sedimentlagen. Während der Verkürzung verhielt sich der massive Kalkstein kompetenter als der Umliegende Mergel und Schiefer, was zur Verfaltetung Morcles Decke führ-te, vorallem in gegen Norden eifallenden überkippten Schenkel. Die Doldenhorn Decke weist dagegen einen viel kleineren überkippten Schenkel und eine stärkere Lokalisierung der Verfor-mung auf. Bis heute gibt es keine 3-D numerischen Studien, die die fundamentale Dynamik der Entstehung von grossen stark verformten 3-D Strukturen wie den Morcles und Doldenhorn Decken sowie der damit verbudenen Rawil Depression untersuchen. Wir betrachten die 3-D Ent-wicklung von geometrischen Instabilitäten sowie die Entstehung fon Faltendecken mit Hilfe von numerischen Simulationen basiert auf der Finite Elemente Methode (FEM). Die Simulation von geometrischen Instabilitäten, die aufgrund von Änderungen der Materialeigenschaften zwischen verschiedenen Gesteinseinheiten entstehen, erfortert einen numerischen Algorithmus, der in der Lage ist die Materialgrenzen mit starkem Kontrast der Materialeigenschaften (zum Beispiel zwi-schen Kalksteineinheiten und Mergel) für starke Verfomung genau aufzulösen. Um dem gerecht zu werden kombiniert unser FE Algorithmus eine numerische Contour-Linien-Technik und ein deformierbares Lagranges Netz mit Re-meshing. Mit dieser kombinierten Methode ist es mög-lich den anfänglichen Materialgrenzen mit dem FE Netz genau zu folgen und die geometrischen Instabilitäten genügend aufzulösen. Der Algorithmus ist in der Lage visko-elastische 3-D Ver-formung zu rechnen, wobei die viskose Rheologie mit Hilfe eines power-law Fliessgesetzes beschrieben wird. Mit dem numerischen Algorithmus untersuchen wir die Entstehung von 3-D Faltendecken, die seitliche Fortpflanzung der Faltung sowie der Cusbate-Lobate Strukturen die sich durch die Verkürzung eines mit Sediment gefüllten Halbgraben bilden. Dabei werden die anfänglichen geometrischen Instabilitäten der Faltung exakt mit dem FE Netz aufgelöst wäh-rend die Materialgranzen des Halbgrabens die Finiten Elemente durchschneidet. Desweiteren wird der 3-D Algorithmus auf die Einschnürung während der 3-D viskosen Plattenablösung und Subduktion angewandt. Die 3-D Resultate werden mit 2-D Ergebnissen und einer 1-D analyti-schen Lösung verglichen.

Coal deposition in carbonate rich shallow Lacustrine systems: The Calaf and Mequinenza sequences (Oligocene, eastern Ebro Basin, NE Spain)

Two main coal-bearing sequences developed during the Oligocene in the Tertiary Ebro Basin, the Calaf (early Oligocene) and Mequinenza (late Oligocene) coal basins. Coal deposition took place in shallow marsh-swamp-lake complexes which sometimes became closed and evolved under warm climatic conditions with fluctuating humidity. These shallow lacustrine systems are closely interrelated with the terminal parts of the distributive fluvial systems which spread from the tectonically active Ebro basin margins. Laterally extensive lignite-bearing sequences, including rather thin, lenticular autochthonous and/or hypautochthonous coal seams with high ash and sulphur contents, characterized coal deposition in the shallow lacustrine systems. Coal seam geometry, which makes them nearly subeconomic, resulted from the tectonic instability during basin margin evolution and the sometimes closed, arid conditions under which the lacustrine systems evolved. High ash and sulphur contents resulted from the inadequate isolation of peat forming environments from clastic influx and from the very low acidity and sometimes high sulphate contents of the lacustrine waters. Coal exploration in shallow lacustrine sequences similar to those described here must take into account that the spread of coal-forming environments and maxima of coal deposition are usually coincident with lake expansions and retraction or shifting of the terminal fluvial zones interrelated with the lacustrine areas.

Benthos of Spanish lakes and reservoirs

A summary of the results from the study of benthos of lakes and reservoirs in Spain is provided, with a list of the species found to date. Spanish natural lakes are smaller than European lakes; the largest is Lake Sanabria, of glacial origin, which is 3 Km long and half a kilorneter wide. Many are very small and situated in the mountains; more than 200 hundred have been recorded in Spain, but only in Lake Sanabria and Lake Banyoles have the benthos been studied. Lake Sanabria is a cold oligotrophic, monomictic lake with oxygen always present in the deepest zones. Its fauna is similar to that of other central European lakes, with Mici.opsectra c.orztractu (a chironomid) as the dominan1 species. Lake Banyoles is a karstic, monomictic and multibasin lake; despite the low primary productivity, due to the abundante of sulphate in the water, the allochthonous inflow of organic matter and the inflow of water from bottom springs, the profunda1 environinent is very stressing for benthic fauna. Very low oxygen concentrations and high sulphide content in the water and sediments dueto meromixis mean that only the larva of the dipteran Chaohoi.lcs flai7icans was present in one of the 5 basins of the lake. In other basins, when oxygen is available (no meromixis), the fauna is similar to that of tlie inineralized lakes of the Aegean region and some lakes in central Italia. On the other hand, preliminary data from the Pyrenean lakes and from Sierra Nevada ponds reveal no differences with northern cold lakes. Tlie largest lakes in Spain are the reservoirs. There are nearly 1000 and data are available on 100 of them, including the kargest. In addition to oxygen and sulphide content in the bottom waters, water level fluctuation and high sedimentation rates are disturbance factors that prevented the organization of the community. Allochthonous inputs of organic matter are also an important factor both in the reservoirs and also in the small, oligotrophic lakes like Banyoles and Sanabria. As a result the meiofaunal loop is very important in many of the Spanish water bodies . For this reason the natural lakes and reservoirs of Spain are dominated by Oligochaeta, small crustaceans and the microcarnivore chironomids (such as Procladi~ls, Cladopelma and Mi(,rnc.hil-onnmus) that feed on these meoifaunal elements. The phytophagous chironomids, like Chironomus, are only abundan1 in the shallow areas of mesotrophic and eutrophic reservoirs. This situation makes it difficult to apply the typological system of SAETHER which predicts with some confidence only the benthic communities of Spanish natural lakes above 1500 m in the Pyrenees or the ponds above 2000 m in Sierra Nevada mountains. Higher temperatures (which originate a longer stratification period), the presence of sulphate in the waters of the eastern part of Spain and high inputs of sediments and allochthonous organic matter seem to be the factors that originated the differences between the benthic profunda1 faunas of Spanish lakes and reservoirs and those of the temperate lakes of north and central Europe.

Propuesta de un protocolo de evaluación de la calidad ecológica de ríos andinos (CERA) y su aplicación a dos cuencas de Ecuador y Perú

ABSTRACT Proposal for an evaluation protocol of the ecological quality of Andean rivers (CERA) and its use in two basins in Ecuador and Peru A Rapid Protocol is presented for Evaluation of the Ecological Status of Andean Rivers (CERA) localized over 2000 m.a.s.l. from the Northern Andes (Venezuela) through the Altiplano in the Central Andes (Bolivia). This protocol was used in 45 sampling sites in the Guayllabamba River Basin in Ecuador and in 42 sampling sites in the Ca nete River Basin in Peru. Previously, and in order to test if the sampling stations may or not be considered reference stations, we constructed a method that assesses 24 basin attributes, hydrology, reach and riverbed and that uctuates from 24 to 120 points; sites with values higher than 100 were considered as potential reference sites. Besides the benthic macroinvertebrats" evaluation, the river habitat and riparian vegetation were also evaluated through of the application of the indices ABI (R´ os et al., submitted), IHF (Pardo et al., 2002) and QBR-And, respectively. The convenience of the initial allocation of the reference sites was evaluated as well. These indices have been properly adapted to the conditions and characteristics of the high Andes rivers. The results obtained for both basins were compared and discussed. Through the use of the CERA protocol, the particular perturbation gradients and the natural variability of the reference sites in both countries were recognized. RESUMEN Propuesta de un protocolo de evaluación de la calidad ecológica de ríos andinos (CERA) y su aplicaci´on a dos cuencas en Ecuador y Perú Se presenta un protocolo rápido de evaluación de la Calidad Ecológica de Ríos Andinos (CERA), situados sobre los 2000 m.s.n.m, desde los Andes del Norte (Venezuela) hasta el Altiplano de los Andes Centrales (Bolivia). Este protocolo ha sido aplicado en 45 estaciones de muestreo en la cuenca del río Guayllabamba en Ecuador y en 42 estaciones de muestreo en la cuenca del río Cañete en Perú. Previamente, para probar si las estaciones de muestreo pueden o no ser estaciones de referencia construimos un método que valora 24 atributos de cuenca, hidrología, tramo y lecho y que fluctúa de 24 a 120 puntos; valores superiores a 100 fueron considerados como sitios potencialmente de referencia. Además del estudio de los macroinvertebrados bentónicos, se evaluó el hábitat fluvial y la comunidad vegetal de ribera a través de la aplicación de los índices ABI (Ríos et al., sometido), IHF (Pardo et al., 2002) y QBR-And respectivamente; así como la conveniencia de la asignación inicial de las estaciones de referencia. Estos índices han sido adecuadamente adaptados a las condiciones y características propias de los ríos altoandinos. Los resultados obtenidos fueron comparados y discutidos entre ambas cuencas. Mediante la aplicación del protocolo CERA se han reconocido los respectivos gradientes de perturbación y la variabilidad natural de las estaciones de referencia en ambos países.

Fluid flow processes at basin scale

S u b s u r face fluid flow plays a significant role in many geologic processes and is increasingly being studied in the scale of sedimentary basins and geologic time perspective. Many economic resources such as petroleum and mineral deposits are products of basin scale fluid flow operating over large periods of time. Such ancient flow systems can be studied through analysis of diagenetic alterations and fluid inclusions to constrain physical and chemical conditions of fluids and rocks during their paleohy d r og e o l ogic evolution. Basin simulation models are useful to complement the paleohy d r og e o l ogic record preserved in the rocks and to derive conceptual models on hydraulic basin evolution and generation of economic resources. Different types of fluid flow regimes may evo l ve during basin evolution. The most important with respect to flow rates and capacity for transport of solutes and thermal energy is gr avitational fluid flow driven by the topographic configuration of a basin. Such flow systems require the basin to be elevated above sea level. Consolidational fluid flow is the principal fluid migration process in basins below sea level, caused by loading of compressible rocks. Flow rates of such systems are several orders of magnitude below topogr a p hy driven flow. Howeve r, consolidation may create significant fluid ove rpressure. Episodic dewatering of ove rpressured compart m e n t s m ay cause sudden fluid release with elevated flow velocities and may cause a transient local thermal and chemical disequilibrium betwe e n fluid and rock. This paper gives an ove rv i ew on subsurface fluid flow processes at basin scale and presents examples related to the Pe n e d è s basin in the central Catalan continental margin including the offshore Barcelona half-graben and the compressive South-Pyrenean basin.

Els assentaments de les edats del bronze, ibèrica i romana d"Els Llirians del Mas i Les Torres (Salàs de Pallars, Pallars Jussà)

[cat] En els anys 2003 i 2004 una intervenció arqueològica preventiva en el terme de Salàs de Pallars va permetre documentar seixanta estructures excavades al subsòl. La majoria de les estructures foren identificades com a sitges, però també es documentaren cubetes i fosses de diversa funció, algunes utilitzades com a sepultures. L"estudi dels materials recuperats, complementats per datacions radiocarbòniques, indiquen dos períodes cronològics: el bronze inicial i l"etapa ibèrica plena, als quals s"ha d"afegir una única estructura que pertany a començaments de l"Imperi romà. Les dades obtingudes informen sobre les pràctiques de les comunitats agrícoles assentades en el sector meridional de la comarca del Pallars Jussà en tres moments històrics diferents. [eng]In 2003 and 2004 a Preventive Archaeological Excavation was done in the locality of Salàs de Pallars. This allowed to catalogue the sixty structures found in the subsoil. Most of the structures were identified as silos, but we also documented basins and pits with different functions, some used as graves. The study of the recovered materials, supported by a radiocarbon analysis technique, ages this around two chronological periods: the Early Bronze Age and Iberian Period. We must add a third period to classify a single structure that belongs to the Early Roman Empire. The obtained results provide us information about the farming methods used by the communities placed in the southern Region of the Pallars Jussà during the three different historical moments.

Task-Driven Activity Reduces the Cortical Activity Space of the Brain: Experiment and Whole-Brain Modeling.

How a stimulus or a task alters the spontaneous dynamics of the brain remains a fundamental open question in neuroscience. One of the most robust hallmarks of task/stimulus-driven brain dynamics is the decrease of variability with respect to the spontaneous level, an effect seen across multiple experimental conditions and in brain signals observed at different spatiotemporal scales. Recently, it was observed that the trial-to-trial variability and temporal variance of functional magnetic resonance imaging (fMRI) signals decrease in the task-driven activity. Here we examined the dynamics of a large-scale model of the human cortex to provide a mechanistic understanding of these observations. The model allows computing the statistics of synaptic activity in the spontaneous condition and in putative tasks determined by external inputs to a given subset of brain regions. We demonstrated that external inputs decrease the variance, increase the covariances, and decrease the autocovariance of synaptic activity as a consequence of single node and large-scale network dynamics. Altogether, these changes in network statistics imply a reduction of entropy, meaning that the spontaneous synaptic activity outlines a larger multidimensional activity space than does the task-driven activity. We tested this model's prediction on fMRI signals from healthy humans acquired during rest and task conditions and found a significant decrease of entropy in the stimulus-driven activity. Altogether, our study proposes a mechanism for increasing the information capacity of brain networks by enlarging the volume of possible activity configurations at rest and reliably settling into a confined stimulus-driven state to allow better transmission of stimulus-related information.

Sedimentology and Stratigraphy of the Pleistocene sediments in Lake Llauset (Southern Pyrenees, Spain)-a first approach

The high alpine valleys in the Southem Pyrenees are characterised by a many small lakes and ponds. They occur above 2000 m and are said to have been formed by glacial erosion. The sediments in these basins should, therefore, contain s t p tigraphic information since deglaciation, at least. An interesting and may be one of the most important of these basins is Lake Llauset in the Alta Ribagorca. The Llauset basin has recently been developped for hydsopower production. In conection with the construction of the retaining wall at the 'Riegel' the sedimentary filling of the lake basin could be investigated, and the first sedimentological and stratigraphicalresults are presented.

Los nummulítidos (Nummulites y Assilina) del Paleoceno Superior-Eoceno Inferior de la cuenca pirenaica: Sistemaáica.

Se ha realizado el estudio sistemático de los nummulítidos pertenecientes a los géneros Nummulites y Assilina del intervalo Paleoceno Superior - Eoceno Inferior de la Cuenca Pirenaica, a partir de muestras procedentes principalmente del sector meridional de la cuenca. Los taxones descritos se han comparado con especímenes procedentes de otras cuencas de la Mesogea: Alpes suizos (Schlieren- y Gumigelflysch) y austríacos (unidades alóctonas helvéticas), norte de Italia (Verona y Vicenza), plataformas marinas adriáticas (Eslovenia y Croacia), península de Crimea (Ucrania), Cuenca de Haymana (Anatolia central, Turquía), y Salt Range (Pakistán). Se han descrito 98 taxones de nummuiítidos -entre especies y subespecies-, de los cuales: - 66 taxones del género Nummulites, pertenecientes a los grupos de N. perforatus, N. partschi, N. rotularius, N. minewensis, N. globulus, N. laevigatus, N. distans, N. heberti y N. spirectypus. - 32 taxones del género Assilina, pertenecientes a los gmpos de A. spira, A. exponens, A. subgranulosa, A. ammonea, A. canalijera y A. alpina. En este trabajo -y siguiendo las consideraciones de Loeblich y Tappan (1987)- Assilina integra las denominaciones gen6ricas tradicionales de Assilina y Operculina.

Caracterización sísmica de una cuenca sedimentaria: análisis inicial

Mediante técnicas numéricas analizamos el efecto de una cuenca sedimentaria sobre las ondas sísmicas que la atraviesan, en el presente estudio ondas P. La cuenca sedimentaria la caracterizamos por una serie estratigráfica con un número de capas y espesor total prefijados, así como el valor medio de sus propiedades elásticas. Para cada capa individual, estos valores medios se hacen fluctuar aleatoriamente en más y en menos alrededor de sus valores medios, con un valor máximo permitido de la variación también prefijado. Los ejemplos numéricos realizados nos muestran que los parámetros que más afectan una onda que se propaga a través de una cuenca son la distancia característica o espesor de las capas individuales y la magnitud de las fluctuaciones. manifestándose la resuuesta de la serie estratigráfica como un filtro paso baja y en la aparición de resonancias. Estos efectos pueden ser observados y cuantificados a partir de un análisis de la atenuación del medio y de la dispersión de la velocidad intrínseca de las ondas P y S.

Expresión geomorfológica de la actividad reciente de la falla de Amer (NE de la Península Ibérica)

Triangular facets, related drainage basins, alluvial fans and subtle scarps reveal the recent activity of the normal Amer fault (NE Spain). The 1427 earthquakes which reached epicentral intensities ranging between VI1 and VI11 have been attributed to the Amer fault. However, the geomorphologic and geologic characteristics of this fault (30 km length) suggest that it might be capable of producing larger earthquakes than those occurred during de 15th century.

Preliminary integrated magnetostratigraphic and biostratigraphic correlation in the Miocene Lorca Basin (Murcia, SE Spain).

The Lorca basin is one of the Neogene basins OS South Eastern Spain. The infilling Tortonian-Messinian deposits are mainly composed OS marls and reach up to 1,200 m in thickness. A biostratigraphic survey OS these deposits, assisted by the determination OS the magnetic polarity reversal pattern Sor most OS these deposits (900 m), has enabled the Tortonian-Messinian chronostratigraphy to be precised. The close sampling space for biostratigraphic determination has enabled the accurate location OS Sour main biostratigraphic events than can be correlated with charactenstic events of the Mediterranean biostratigraphic Zones. In addition, the location OS the TortonianNessinian boundary has been accurately placed at some 150 m below the main gypsurn unit outcropping in the basin. The integrated bio-magnetostratigraphic data fiom the studied section allows a tentative interpretation OS the identified magnetozones. Thus, a correlation to the Geomagnetic Polarity Time Scale is presented for more than 900 m of pre-evaporite Miocene stratigraphic succession fiom the Lorca basin. Moreover, about 15' OS anticlockwise rotation has been detected. Its significance is evaluated in the basin geodynamic framework.

Descripció geoambiental i paisatgística del sistema platja-duna de cala Borró (cap Ras, Alt Empordà- Costa Brava, Girona)

The geoambiental and landscape description of the beach-dune system of Cala Borró, (Cap Ras), placed in the town of Colera (Alt Empordà), is carried out. The dunar system, developed with orientation and N-S, links three beach pockets following the topographic slopes of the torrential basins. We find coalescence of dunes in the upper zones, which were possibly an object of reafforestation in the 19thC. to avoid erosion