Pandemic influenza A (H1N1) 2009: epidemiological analysis of cases in a tropical/semi-arid region of Brazil

IntroductionThe year 2009 marked the beginning of a pandemic caused by a new variant of influenza A (H1N1). After spreading through North America, the pandemic influenza virus (H1N1) 2009 spread rapidly throughout the world. The aim of this study was to describe the clinical and epidemiological characteristics of cases of pandemic influenza in a tropical/semi-arid region of Brazil.MethodsA retrospective study analyzed all suspected cases of pandemic influenza (H1N1) 2009 reported in the Ceará State through the National Information System for Notifiable Diseases during the pandemic period between 28 April, 2009 and November 25, 2010.ResultsA total of 616 suspected cases were notified, 58 (9.4%) in the containment phase and 558 (90.6%) in the mitigation phase. Most cases were of affected young people resident in the City of Fortaleza, the largest urban center in the State of Ceará. The most frequent symptoms presented by the cases with confirmed infection were fever, cough, myalgia, arthralgia, and nasal congestion. Mortality rate was 0.0009/1,000 inhabitants and lethality was 5.6%. Deaths were observed only in the mitigation phase. Mortality rates were similar for both sexes but were higher in the age group under 5 years.ConclusionsThe study suggests that the influenza A (H1N1) pandemic in this tropical/semi-arid region had a lower magnitude when compared to states in the Southern and Southeastern regions of Brazil.

An optimized one-tube, semi-nested PCR assay for Paracoccidioides brasiliensis detection

Introduction Herein, we report a one-tube, semi-nested-polymerase chain reaction (OTsn-PCR) assay for the detection of Paracoccidioides brasiliensis. Methods We developed the OTsn-PCR assay for the detection of P. brasiliensis in clinical specimens and compared it with other PCR methods. Results The OTsn-PCR assay was positive for all clinical samples, and the detection limit was better or equivalent to the other nested or semi-nested PCR methods for P. brasiliensis detection. Conclusions The OTsn-PCR assay described in this paper has a detection limit similar to other reactions for the molecular detection of P. brasiliensis, but this approach is faster and less prone to contamination than other conventional nested or semi-nested PCR assays.

Management of post-transplant Epstein-Barr virus-related lymphoproliferative disease in solid organ and hematopoietic stem cell recipients

Epstein-Barr virus (EBV)-related post-transplant lymphoproliferative disease (PTLD) is one of the most serious complications associated with solid organ and hematopoietic stem cell transplantation. PTLD is most frequently seen with primary EBV infection post-transplant, a common scenario for pediatric solid organ recipients. Risk factors for infection or reactivation of EBV following solid organ transplant are stronger immunosuppressive therapy regimens, and being seronegative for receptor. For hematopoietic stem cell transplantation, the risk factors relate to the type of transplant, human leukocyte antigen disparity, the use of stronger immunosuppressants, T-cell depletion, and severe graft-versus-host disease. Mortality is high, and most frequent in patients who develop PTLD in the first six months post-transplant. The primary goal of this article is to provide an overview of the clinical manifestations, diagnosis, accepted therapies, and management of EBV infection in transplant recipients, and to suggest that the adoption of monitoring protocols could contribute to a reduction in related complications.

Ion-beam sources based on superionic solid electrolytes

An ion emitter consisting of a sharp silver tip covered in RbAg4I5 solid electrolyte film has been developed and studied. An accelerating potential is applied and Ag+ ions are emitted from the tip’s apex by field evaporation. The emitted ions are collected by a Faraday cup, producing a current on the pico/nanoampere level which is read by an electrometer. The tips were produced mechanically by sandpaper polishing. The sharpest tip produced had a 2:4 m apex radius. Two deposition methods were studied: thermal vacuum and pulsed laser deposition. The best tip produced a peak current value of 96nA at 180oC, and a quasi-stable 4nA emission current at 160oC, both using an extraction potential of 10kV . The emission dependence on time, temperature and accelerating potential has been studied. Deposited films were characterized by X-ray diffraction (XRD), profilometry, optical and Scanning Electron Microscope (SEM) and Secondary Ion Mass Spectroscopy (SIMS) measurements. Several ion emitters were developed, the latter ones were all able to maintain stable high ion emissions for long periods of time. This investigation was a continuation of an ongoing project backed by the European Space Agency, with the objective of making a proof of concept of this kind of ion emitter with potential application on ion thrusters for orbiting satellites. Going forward, it would be interesting to make a finer analysis of the electrolyte’s conductivity at high temperatures, explore Wien Effect-based emission and to further develop a multi-tip ion emitter prototype.

Assessment of schistosomiasis in the semi-arid Northeast region of Brazil: the São Francisco River large-scale water transposition project

Abstract: INTRODUCTION Risk of schistosomiasis expansion to semi-arid northeastern Brazil under the influence of the Integration Project of the São Francisco River (IPSFR) was assessed. METHODS: Stool examinations of schoolchildren, epidemiological investigation, and survey of the local host snail Biomphalaria straminea were performed in five IPSFR municipalities. RESULTS Six of 4,770 examined schoolchildren were egg-positive for Schistosoma mansoni. Biomphalaria straminea was widespread, but not naturally infected with S. mansoni. Snails experimentally exposed to two laboratory S. mansoni strains yielded infection indices of 1-4.5%. CONCLUSIONS: There is evidence of active schistosomiasis transmission in the area; thus, intensive surveillance actions are required.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

The early metallurgy in Southwestern Iberia: metals from the Chalcolithic Settlement of São Pedro (Redondo)

Archaeological excavations carried out in the archaeological site of São Pedro (Southern Portugal) revealed a Chalcolithic settlement occupied in different moments of the 3rd millennium BC. The material culture recovered includes different types of materials, such as ceramics, lithics and metals. The later comprises about 30 artefacts with different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to the 2nd and 3rd quarter of the 3rd millennium BC. In the present work the collection of chalcolithic metallic artefacts recovered in São Pedro was characterized. Analytical studies involved micro energy dispersive X-ray fluorescence spectrometry (micro-EDXRF) to determine elemental composition, together with optical microscopy and Vickers microhardness testing for microstructural characterisation and hardness determination. Main results show copper with variable amounts of arsenic and very low content of other impurities, such as iron. Moreover, nearly half of the collection is composed by arsenical copper alloys (As > 2 wt.%) and an association was found between arsenic content and typology since the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic-rich copper ores or smelting products. Furthermore, after casting an artefact would have been hammered, annealed and sometimes, finished with a hammering operation. Additionally, microstructural variations in this collection reveal somewhat different operational conditions during casting, annealing and forging, as expected in such a primitive metallurgy. Moreover the operational sequence seems to be used to achieve the required shape to the object, rather than to intentionally make the alloy harder. Overall, this study suggests that Chalcolithic metallurgists might have a poor control of the addition of arsenic and/or were unable to use this element to increase the hardness of tools and weapons. Finally, the compositions, manufacturing processes and hardness were compared to those from neighbouring regions and different chronological periods.

Elaboração de uma semi-conserva de pescado de água doce "Picles de Peixe". I. Tempo de cura, acidificação, textura e nível de sal

Neste trabalho são estudadas as condições para a correta combinação entre o tempo de cura, acidificação e nível de sal para produzir uma semi-conserva de pescado de de água doce acondicionada em vidro, utilizando o efeito da combinalção sal/ácido. As espécies utilizadas foram jaraqui (Semaprochilodus spp.), Curimatá (Prochilodus nigricans), Dourado (Brachyplastistoma flavicans) e Pirarucu (Arapaima gigas). Na salmora de cura prelimiar o tempo indicado para se obter uma melhor textura foi de 4 semanas, a acidificação até 4,5 foi alcançada na solução contendo 5% de ácido/100 gramas de pescado e o nível adequado de sal foi de 15% (p/v). Na salmora flavorizante a proporção de ácido foi de 1% (v/v) o que torna o produto de sabor agradável, sal na concentração de 2% (p/v) e a adição de 1% de condimentos.

DESENVOLVIMENTO NINFAL DO GAFANHOTO NEOTROPICAL SEMI-AQUÁTICO Stenacris fissicauda fissicauda (BRUNER, 1908) (ORTHOPTERA:ACRIDIDAE) EM CONDIÇÕES CONTROLADAS

Estudou-se a influência da temperatura e do fotoperíodo no desenvolvimento ninfal do gafanhoto semi-aquático Stenacris fissicauda fissicaudaproveniente de uma região de várzea, perto de Manaus. Ninfas recém-eclodidas foram coletadas no campo na macrófita aquática Paspalum repens (Gramineae-Poaceae)e criadas sob condições controladas em câmaras de criação (8, 12 e 24 horas de luz, 27°C e 27/21°C de temperatura) e sob condições naturais. Esta espécie apresenta 5 estádios ninfais para os machos e 6 para as fêmeas sob condições de dia longo no laboratório e durante o período com menos precipitação (estação "seca") sob condições naturais. No entanto, observou-se um estádio extra para machos (6o) e fêmeas (7o) sob condições de dia curto no laboratório. Este estádio ocorreu durante o período com mais precipitação (estação chuvosa) sob condições naturais. Constatou-se que a temperatura e o fotoperíodo interagiram no desenvolvimento ninfal sob condições controladas: 1) O número de estádios (especialmente em fêmeas) foi principalmente influenciado pelo fotoperíodo; 2) O tempo de desenvolvimento ninfal (em ambos os sexos) sobretudo foi influenciado pela temperatura. Os resultados estão sendo discutidos sob o ponto de que a luz pode atuar como fator de controle (ecofator) no número de estádios ninfais de insetos em ecossistemas tropicais, mesmo sendo situados perto do equador, devido à mudanças sazonais de insolação e/ou intensidade de luz durante o ano.

The reasons behind the progression in PISA scores: An education production function approach using semi-parametric techniques

Research Masters

Aspectos da Biologia e Etologia de Paulinia acuminata (De Geer), 1773 (Orthoptera: Pauliniidae), um gafanhoto semi-aquático, na Amazônia Central

Paulinia acuminata (Orthoptera: Pauliniidac) desenvolve todo seu ciclo vital em macrófitas aquáticas. Entre 17 macrófitas e 5 hortaliças testadas, a oviposição foi constatada somente em Salvinaceae (Salvinia auriculata, S. minima, S. sprucei, Azolla cf. microphylla e Araceae (Pistia stratiotes). O período médio de incubação, em laboratório, foi de 18,7 (+/- 1,8) dias, com uma média de 7,3 (+/- 2,8) ovos por postura. O desenvolvimento dos seis estádios ninfais durou 47,12 (+/-1,2) dias. O ciclo de vida completo, ovo-adulto, foi de 93,2 dias sob uma temperatura do ar em torno dc 29 °C. Observações etológicas de laboratório e de campo são apresentadas.

Energy harvesting device based on a metallic glass/PVDF magnetoelectric laminated composite

A flexible and low cost energy harvester device based on the magnetoelectric (ME) effect has been designed using Fe64Co17Si7B12 as amorphous magnetostrictive ribbons and PVDF as the piezoelectric element. Sandwich-type laminated composite of 3 cm long has been fabricated by gluing these ribbons to the PVDF with the Devcon 5 minute epoxy. Good power output and power density of 6.4 μW and 1.5 mW/cm3, respectively, have been obtained through a multiplier circuit. All values have been measured at the magnetomechanical resonance of the laminate. The effect of the length of the ME laminate on the power output has been also studied, exhibiting a decay as the length of the ME laminate does. Nevertheless, good performance of such device has been obtained for a 0.5 cm long device, working already at 337 KHz, within the low radio frequency (LRF) range.

Metallic glass/PVDF magnetoelectric energy harvester working up to the radiofrequency range

Companies and researchers involved in developing miniaturized electronic devices face the basic problem of the needed batteries size, finite life of time and environmental pollution caused by their final deposition. The current trends to overcome this situation point towards Energy Harvesting technology. These harvesters (or scavengers) store the energy from sources present in the ambient (as wind, solar, electromagnetic, etc) and are costless for us. Piezoelectric devices are the ones that show a higher power density, and materials as ceramic PZT or polymeric PVDF have already demonstrated their ability to act as such energy harvester elements. Combinations between piezoelectric and electromagnetic mechanism have been also extensively investigated. Nevertheless, the power generated by these combinations is limited under the application of small magnetic fields, reducing the performance of the energy harvester [1]. In the last years the appearance of magnetoelectric (ME) devices, in which the piezoelectric deformation is driven by the magnetostrictive element, enables to extract the energy of very small electromagnetic signals through the generated magnetoelectric voltage at the piezoelectric element. However, very little work has been done testing PVDF polymer as piezoelectric constituent of the ME energy harvester device, and only to be proposed as a possibility of application [2]. Among the advantages of using piezopolymers for vibrational energy harvesting we can remember that they are ductile, resilient to shock, deformable and lightweight. In this work we demonstrate the feasibility of using magnetostrictive Fe-rich magnetic amorphous alloys/piezoelectric PVDF sandwich-type laminated ME devices as energy harvesters. A very simple experimental set-up will show how these laminates can extract energy, in amounts of μW, from an external AC field.

Effect of ionic liquid anion type in the performance of solid polymer electrolytes based on Poly(Vinylidene fluoride-trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF-TrFE) has been investigated. 1-ethyl-3-methylimidazolium acetate, [C2mim][OAc], 1-ethyl-3-methylimidazolium triflate, [C2mim][(CF3SO3)3], 1-ethyl-3-methylimidazolium lactate, [C2mim][Lactate], 1-ethyl-3-methylimidazolium thiocyanate, [C2mim][SNC] and 1-ethyl-3-methylimidazolium hydrogen sulphate [C2mim][HSO4] have been used in SPE prepared by thermally induced phase separation (TIPS). The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC] > [CF3SO3)3] > [HSO4] > [Lactate] > [OAc], which is mainly dependent on the viscosity of the ionic liquid.