Conquistas e desafios do processo de trabalho de enfermagem: o caso dos CAPS em Natal/RN

The Brazilian Psychiatric Reform proposes creating linkages / interactions of the mentally ill with civil society , through promoting citizenship and assistance to the mentally ill. The deinstitutionalization of mental health advocates from the guidelines decreased supply of hospital beds and consequently the creation of substitute services for psychosocial care, especially with regard to therapeutic practices emancipatory. From this scenario, the present study aims to investigate the relevance and challenges of the process of nursing work in CAPS III in Natal / RN. It is descriptive research with a qualitative and exploratory. The subjects are employees of the nursing team in CAPS III East of Natal / RN. This service has actions for the psychosocial care of the subjects treated with daily multidisciplinary care by behaving the length of treatment and follow-up activities, industrial and cultural activities. Employ the semi-structured interview as a tool for data collection. The data analysis was done by means of thematic analysis proposed by Bardin. Thus, this sought to bring to the discussion of how this process is consolidated in the daily service. Thus, purposed to contribute to the debate on deinstitutionalization in psychosocial care as a guideline in the process of mental health nursing work in a CAPSIII, Natal / RN

Fertilidade do solo, estado nutricional e produtividade de girassol, em função da aplicação de lodo de esgoto

O lodo de esgoto é um resíduo urbano-industrial que tem causado preocupação, quanto ao uso agrícola. Sua utilização pode ser viável, após a devida suplementação potássica, em substituição a fertilizantes minerais, especialmente em culturas como a do girassol. O presente trabalho objetivou avaliar a produtividade e nutrição mineral do girassol cv. CATISSOL 01, além da fertilidade de um Latossolo Vermelho eutroférrico adubado com lodo de esgoto, em comparação à adubação mineral, por dois anos consecutivos. O experimento utilizou delineamento em blocos casualizados, com 4 tratamentos (fertilização mineral, 5 t ha-1 ano-1, 10 t ha-1 ano-1 e 20 t ha-1 ano-1 de lodo de esgoto) e 5 repetições. Foram analisadas a produtividade de grãos de girassol, a concentração de macro e micronutrientes na folha diagnóstico e a fertilidade do solo. A produtividade de sementes do girassol adubado com o resíduo, em todas as doses, foi equivalente à adubação mineral, e os teores foliares situaram-se na faixa adequada, tanto para macro quanto para micronutrientes. O uso de lodo de esgoto, com suplementação potássica, mostrou-se eficiente na substituição total ou parcial da adubação mineral, sem prejudicar a produtividade da cultura do girassol.

Densitometric and biochemical values of broiler tibias at different ages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Predição de valores genéticos para a produção de leite no dia do controle e para a produção acumulada até 305 dias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Viabilidade do uso de secadores solar de convecção natural e forçada para a secagem do coco Licuri

Licuri is a palm tree from the semiarid regions of Bahia State, Brazil. It is an important source of food and feed in that region, since their nuts are commonly eaten by humans and used as maize substitute for poultry feeding. The aim of this dissertation is to study the feasibility for use of natural convection solar dryers and forced being compared with the traditional drying outdoors for drying coconut licuri Syagrus coronate. The study led to the construction of two prototype solar dryer for carrying out experiments proving: model Solar Drying System Direct Exposure to Natural Convection built with wood, has a drying chamber with direct cover transparent glass laminates 4 mm, using techniques for proper isolation of the drying chamber. The two prototypes were comparatively analyzed for performance and drying efficiency with traditional extractive use by the community. Were evaluated the variables: time and drying rates and quality of the final samples of coconut licuri. The fruits were harvested and brought the town of Ouricuri, in the city of Caldeirão Grande, BA for the experiments comparing the three methods of drying was used a standard load of 4.0 kg The quantitative analysis for the result of the drying rate was found in 74% yield and 44% for natural and forced convection respectively compared with the traditional drying. These drying rates represent variation 3-5 times lower. Drying using forced convection licuri showed better quality, was found in a reddish pulp, representing the quantities that were kept of the nutrient beta carotene, and not notice the flavor change from the previous system, the final cost of construction of this system were higher . The prototypes built competitive advantage and had testified fully to resolve the technical difficulties previously encountered in the production of products made of coconut licuri. Allowing add value and increase their potential use for the fruit extractive communities of semi-arid region of Bahia

Avaliação da temperatura de cristalização da parafina em sistemas: parafina, solvente e tensoativo

The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density

Desempenho da cultura do milho (Zea mays L.) em sucessão com aveia-preta (Avena strigosa Schreb.) sob manejos agroflorestal e tradicional

O experimento foi conduzido na área agrícola da Associação Brasileira de Agricultura Biodinâmica, no Município de Botucatu, SP. O objetivo do trabalho foi avaliar o desempenho da cultura do milho (Zea mays L.), variedade AL 30, em sucessão com aveia-preta (Avena strigosa Schreb.), em um sistema agroflorestal em aleias com Leucaena diversifolia (Schlecht.) Bentham e em um sistema agrícola tradicional, seguindo-se um delineamento estatístico de blocos casualizados. Os tratamentos utilizados, em ambos os sistemas, foram: T - Testemunha; F - Fertilizante; B - Biomassa da poda das aleias de L. diversifolia; e B+F - Biomassa da poda de L. diversifolia + Fertilizante. Os parâmetros avaliados foram os rendimentos de matéria seca de aveiapreta, produtividade média de grãos de milho, massa de 100 grãos de milho, altura da planta de milho e altura de inserção da espiga. Os resultados foram semelhantes aos relatados por outros autores. Concluiu-se que ambos os sistemas apresentaram viabilidade do ponto de vista produtivo e que o uso de biomassa pode substituir parcial ou totalmente a fertilização química.

Flotação por ar dissolvido na clarificação de águas com baixa turbidez utilizando sulfato de alumínio e sementes de Moringa oleifera como coagulantes

This work aims to investigate the process of Dissolved air Flotation (DAF) for clarifying water samples with low turbidity using aluminum sulphate and Moringa oleifera seeds as coagulants. The experimental procedure was carried out in a bench scale flotation unit. The influences on the pre-treatment conditions (coagulant dosage and flocculation time) and flotation parameters (superficial application rate and recirculation rate) were evaluated considering the efficiency of the process. The efficiency was evaluated by determining the turbidity of the untreated and treated water samples. The results obtained showed that turbidity reduction can be obtained very efficiently by using DAF and the latter coagulant in low turbidity water. Using aluminum sulphate in pH´s 5.0 and 6.0 better efficiencies were obtained with low concentrations (15 mg/L), achieving values of 92% of turbidity reduction. In the case of use of Moringa oleifera better efficiencies of reduction of turbidity were reported when using a concentration of 50 mg/L in all range of pH´s, achieving 86% of reduction. The zeta potential was also determined, in an attempt to aid comprehension of the coagulation mechanisms involved. The coagulation mechanisms with Moringa oleifera seeds were shown to be adsorption and charge neutralization, as well as adsorption and bridging. Concerning aluminum sulphate, the predominant mechanisms are adsorption and charge neutralization and enmeshment in a precipitate. The results indicate that for low turbidity water, Moringa oleifera seeds could potentially be a viable substitute for aluminum sulphate

Desenvolvimento de sorvete probiótico a base de leite de cabra: estudo da formulação, características físico químicas, sensoriais e viabilidade das bactérias probióticas

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Incorporação do resíduo oriundo do beneficiamento de caulim em concreto asfáltico

The municipal district of Equador-RN is located in an area of great amounts of ores, being your main economical activity the extraction and the kaolin improvement. The main originating from environmental problem that activity is the amount of generated residue, about 70% of the extracted kaolin. The residues are simply piled up in lands of the improvement companies, occupying like this a large area and causing impact in the existent flora. When dry, the residues transform powdered and for the action of the wind, they disperse, polluting the air. Being like this, the present work has as objective evaluates the incorporation of the great residue, originating from of the kaolin improvement, in partial substitution of all the employed aggregates in a conventional mixture of asphalt concrete, which was used in the paving of BR101/RN061 - passage between Ponta Negra and Ares. That evaluation was accomplished in three stages. The first refers to the evaluation of the physical, thermal and mineralogical characteristics of the residue with the intention of to classify it and to define your application as aggregate (small and great). The second refers to the physical characterization of the aggregates and of the asphalt material used in the conventional mixture. And the third, to the evaluation of the mixtures containing residue, which were elaborated starting from the conventional mixture with the gradual incorporation of the residue, from 5 to 40%, in substitution to the part of the conventional aggregates, in way to obtain similar particle size curves the one of the conventional mixture. That evaluation was accomplished through the comparison between the volumetric composition, the mechanical behavior and the susceptibility to the humidity of the mixtures containing residue with the one of the conventional mixture, and with the one of the DNIT specifications. The results show that the great residue originating from of the kaolin improvement has grains of the most varied size, being like this, it can substitute part of all the conventional aggregates and of the filler in an asphalt mixture. Besides, your mineralogical composition presented the same present minerals in the composition of conventional aggregates used in paving. The results evaluation of the volumetric composition of the mixtures containing residue indicates that it can use up to 30% of residue in substitution to the conventional aggregates. The evaluation of the mechanical behavior of those mixtures indicates that the residue increment in the studied mixtures caused an increase of the stability and a reduction of the resistance to the traction. The values obtained in the resistance to the traction meet below the minimum value specified by DNIT, but close to the value obtained in the conventional mixture. When taking in consideration the susceptibility of the same ones to the humidity, the results indicate that she can use up to 25% of residue

Lack of antidiabetic effect of a Eugenia jambolana leaf decoction on rat streptozotocin diabetes

Streptozotocin-diabetic rats were treated for 17 days with a decoction of Eugenia jambolana (Myrtaceae) leaves (15%, w/v) as a substitute for water. Body weight, food and fluid intake, urine volume, glycemia, urinary glucose and urea were evaluated every 5 days. The animals were sacrificed by decapitation and blood samples collected for the determination of glycemia, serum cholesterol, HDL-cholesterol, triglycerides and angiotensin-converting enzyme. The weight of adipose and muscle tissues was also determined. There were no statistically significant differences between treated and untreated rats for any of the biochemical or physiological parameters. We conclude that, at least in this experimental model, Eugenia jambolana leaf decoction has no antidiabetic activity.

Anti-diabetic activity of Bauhinia forficata decoction in streptozotocin-diabetic rats

The effects of using Bauhinia forficata leaf decoction (150 g leaf/l water; 35.2+/-7.8 ml/100 g body weight mean daily dose) as a drinking-water substitute for about I month on streptozotocin-diabetes (STZ-diabetes) in male Wistar rats were investigated. The physico-metabolic parameters measured were: body weight, food and liquid intake, urinary volume, hepatic glycogen, serum triglycerides and cholesterol, plasma glucose, urinary glucose and urea, and the weight of epididymal and retroperitoneal adipose tissue and soleus and extensor digitorum longus muscles. The STZ-diabetic rats treated with decoction showed a significant reduction in serum and urinary glucose and urinary urea as compared to the STZ-diabetic control, no difference being seen between decoction-treated and -untreated non-diabetic rats. The other physico-metabolic factors showed no changes in treated STZ-diabetic rats. The improvement in carbohydrate metabolism seen in the rats treated with Bauhinia forficata decoction does not appear to be linked to the inhibition of glycogenolysis or the stimulation of glycogenesis nor does it appear to act in a way similar to insulin or the sulfonylureas, although it may act by the inhibition of neoglycogenesis in a manner similar to that of the biguanides. (C) 2002 Elsevier B.V. Ireland Ltd. All rights reserved.

Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil

Reusing scrap tires has become a worldwide challenge, especially due to the great difficulty in finding ecologically and economically feasible ways to dispose of them. This has led to the creation of specific programs and legislation for reusing scrap tires. Research has shown that a certain percentage of scrap tire rubber can be added to asphalt compositions, and this has become a worldwide practice. This paper describes the properties of four asphalt compositions modified with scrap tire rubber (STR) prepared in the laboratory. These properties are then compared with those of asphalt modified with styrene butadiene styrene (SBS), a synthetic polymer and one of the most common modifiers, to verify the feasibility of using scrap tire rubber as a substitute for SBS. The scope of this study does not include an analysis of how STR affects end-of-life asphalt. The main findings indicate that STR is a potential substitute of SBS in paving material, and although it does not meet some of the standard specifications when compared with SBS, these issues can be overcome by proper care during storage and transportation. The substitution of SBS by STR also showed the potential for about 10% in expenditure savings. (C) 2012 Elsevier Ltd. All rights reserved.

Comparação entre os métodos de aplicação de fluido de corte convencional e otimizado na retificação plana de cerâmicas

Com o grande crescimento tecnológico e a necessidade de melhoria, um dos materiais que ganhou uma grande gama na área da engenharia mecânica é a cerâmica, pois possui vantagens físico-químicas e propriedades mecânicas significativas sobre o aço. Entretanto, sua usinagem é um processo difícil e delicado, que requer ainda uma grande atenção em relação ao seu estudo. Assim, o processo de retificação é um dos métodos que tem apresentado bons resultados, porém um grande problema acerca de tal processo é o uso excessivo de fluidos de corte, o que se tornou uma preocupação mundial, já que os fluidos apresentam graves problemas socioambientais, além disso, o fluido de corte é responsável por uma grande parte do custo final do processo, provocando, desse modo, um grande interesse em pesquisas referentes a métodos alternativos de forma a reduzir o consumo e melhorar as características do fluido de corte utilizado. Este trabalho visa comparar duas técnicas de lubri-refrigeração, o método convencional e a Lubrificação Otimizada. O uso do método otimizado é uma alternativa à diminuição do volume de fluido utilizado, já que este tem como princípio a aplicação de uma menor quantidade de fluido de corte com uma alta velocidade, localmente aplicada, ou seja, com essa redução benefícios ambientais e socioeconômicas são obtidos. A análise do trabalho será feita a partir da avaliação das variáveis de saída do processo de retificação plana tais como o comportamento rugosidade e desgaste do rebolo, já que por elas é possível avaliar o processo em relação a qualidade da peça versus custo. Com essas analises, pretende-se avaliar se a técnica otimizada é viável a substituição da refrigeração convencional na retificação plana de cerâmicas.