Preliminary investigation of mixed adsorbents for the removal of copper and methylene blue from aqueous solutions

With most recent studies being focused on the development of
advanced chemical adsorbents, this paper investigates the possibility of
using two natural low-cost materials for selective adsorption. Multiadsorbent
systems containing tea waste and dolomite have been tested for
their effectiveness in the removal of copper and methylene blue from
aqueous solutions. The effects of contact time, solution pH and
adsorption isotherms on the sorption behaviour were investigated. The
Langmuir and Freundlich isotherms adequately described the adsorption of
copper ions and methylene blue by both materials in different systems.
The highest adsorption capacities for Cu and MB were calculated as 237.7
at pH 4.5 and 150.44 mg.g‒1 at pH 7 for DO and TW+DO respectively. Tea
waste (TW) and dolomite (DO) were characterized by Fourier transform
infrared spectroscopy, scanning electron microscopy and Energy dispersive
X-ray analysis. The removal of Cu and MB by dolomite was mainly via
surface complexation while physisorption was responsible for most of the
Cu and MB adsorption onto tea waste. Identifying the fundamental mechanisms and behaviour is key to the development of practical multi-adsorbent packed columns.

The feasibility of using near infrared and Raman spectroscopic techniques to detect fraudulent adulteration of chili powders with Sudan dye

Chili powder is a globally traded commodity which has been found to be adulterated with Sudan dyes from 2003 onwards. In this study, chili powders were adulterated with varying quantities of Sudan I dye (0.1-5%) and spectra were generated using near infrared reflectance spectroscopy (NIRS) and Raman
spectroscopy (on a spectrometer with a sample compartment modified as part of the study). Chemometrics were applied to the spectral data to produce quantitative and qualitative calibration models and prediction statistics. For the quantitative models coefficients of determination (R2) were found to be
0.891-0.994 depending on which spectral data (NIRS/Raman) was processed, the mathematical algorithm used and the data pre-processing applied. The corresponding values for the root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) were found to be 0.208-0.851%
and 0.141-0.831% respectively, once again depending on the spectral data and the chemometric treatment applied to the data. Indications are that the NIR spectroscopy based models are superior to the models produced from Raman spectral data based on a comparison of the values of the chemometric
parameters. The limit of detection (LOD) based on analysis of 20 blank chili powders against each calibration model gave 0.25% and 0.88% for the NIR and Raman data, respectively. In addition, adopting a qualitative approach with the spectral data and applying PCA or PLS-DA, it was possible to discriminate
between adulterated chili powders from non-adulterated chili powders.

Tunable thermomorphism and applications of ionic liquid analogues of Girard's reagents

A series of ionic liquids based on Girard's reagents was synthesised. Their tunable thermomorphic behaviour with water was demonstrated, and slight modifications in the cationic structure led to drastic changes in their water miscibility. Their phase behaviour, involving monophasic–biphasic transitions, drove a number of practical applications, including scavenging water-soluble dyes and the extraction of metals from water.

Chemistry and Mechanism of Alizarin Red S and Methylene Blue Biosorption onto Olive Stone: Equilibrium and Kinetic

The biosorption process of anionic dye Alizarin Red S (ARS) and cationic dye methylene blue (MB) as a function of solution pH, initial concentration and contact time onto olive stone (OS) biomass has been investigated. The main objectives of the current study are to: (i) study the chemistry and the mechanism of ARS and MB biosorption onto olive stone and the type of OS–ARS, MB interactions occurring, (ii) study the biosorption equilibrium and kinetic experimental data required for the design and operation of column reactors. Equilibrium biosorption isotherms and kinetics were also examined. Experimental equilibrium data were fitted to four different isotherms by non-linear regression method, however, the biosorption experimental data for ARS and MB dyes were well interpreted by the Temkin and Langmuir isotherms, respectively. The maximum monolayer adsorption capacity for ARS and MB dyes were 109.0 and 102.6 mg/g, respectively. The kinetic data of the two dyes could be better described by the pseudo second-order model. The data showed that olive stone can be effectively used for removing dyes from wastewater.

The use of a novel compact fluorosensor for in situ monitoring of the photocatalytic destruction of methylene blue dye effluents

The use of TiO 2 photocatalysis for the destruction of dyes such as methylene blue has been extensively reported. One of the challenges faced in both the laboratory and large scale water treatment plants is the fact that the samples have to be removed from the reactor vessel and the catalyst separated prior to analysis being undertaken. In this paper we report the development of a simple fluorimeter instrument and its use in monitoring the photocatalytic destruction of methylene blue dyes in the presence of catalyst suspensions. The results reported show that the instrument provides an effective method for in situ monitoring of the photocatalytic destruction of fluorescent dyes hence allowing more accurate measurement due to the minimisation of sample loss and cross contamination. Furthermore it also provides a method for real time monitoring of the dye pollutant destruction in large scale photocatalytic reactors.

Reductive photocatalysis and smart inks

Semiconductor-sensitised photocatalysis is a well-established and growing area of research, innovation and commercialisation; the latter being mostly limited to the use of TiO2 as the semiconductor. Most of the work on semiconductor photocatalytic systems uses oxygen as the electron acceptor and explores a wide range of electron donors; such systems can be considered to be examples of oxidative photocatalysis, OP. OP underpins most current examples of commercial self-cleaning materials, such as: glass, tiles, concrete, paint and fabrics. OP, and its myriad of applications, have been reviewed extensively over the years both in this journal and elsewhere. However, the ability of TiO2, and other semiconductor sensitisers, to promote reductive photocatalysis, RP, especially of dyes, is significant and, although less well-known, is of growing importance. In such systems, the source of the electrons is some easily oxidised species, such as glycerol. One recent, significant example of a RP process is with respect to photocatalyst activity indicator inks. paiis, which provide a measure of the activity of a photocatalytic film under test via the rate of change of colour of the dye in the ink coating due to irreversible RP. In contrast, by incorporating the semiconductor sensitiser in the ink, rather than outside it, it is possible to create an effective UV dosimeter, based on RP, which can be used as a sun-burn warning indicator. In the above examples the dye is reduced irreversibly, but when the photocatalyst in an ink is used to reversibly photoreduce a dye, a novel, colourimetric oxygen-sensitive indicator ink can be created, which has commercial potential in the food packaging industry. Finally, if no dye is present in the ink, and the semiconductor photocatalyst-loaded ink film coats an easily reduced substrate, such as a metal oxide film, then it can be used to reduce the latter and so, for example, clean up tarnished steel. The above are examples of smart inks, i.e. inks that are active and provide either dynamic information (such as UV dose or O2 level) or a useful function (such as tarnish removal), and all work via a RP process and are reviewed here

Photocatalytic activity indicator inks for the probing a wide range of surfaces

Three photocatalyst inks based on the redox dyes, Resazurin (Rz), Basic Blue 66 (BB66) and Acid Violet 7 (AV7), are used to assess the photocatalytic activities of a variety of different materials, such as commercial paint, tiles and glass and laboratory made samples of sol–gel coated glass and paint, which collectively exhibit a wide range of activities that cannot currently be probed by any one of the existing ISO tests. Unlike the ISO tests, the ink tests are fast (typically <10 min), simple to employ and inexpensive. Previous work indicates that the Rz ink test at least correlates linearly with other photocatalytic tests such as the photomineralisation of stearic acid. The average time to bleach 90% of the key RGB colour component of the ink, red for Rz and BB66 inks and green for AV7 ink, is determined, ttb(90), for eight samples of each of the different materials tested. Five laboratories conducted the tests and the results revealed an average repeatability and reproducibility of: ca. 11% and ca 21%, respectively, which compare well with those reported for the current ISO tests. Additional work on commercial self-cleaning glass using an Rz ink showed that the change in the red component of the RGB image of the ink correlated linearly with that of the change of absorbance at 608 nm, as measured using UV/vis spectroscopy, and the change in the a* component of the Lab colour analysis of the ink, as measured using diffuse reflectance spectroscopy. As a consequence, all three methods generate the same ttb(90). The advantages of the RGB digital image analysis method are discussed briefly.

Mechanism of Alizarin Red S and Methylene Blue Biosorption onto Olive Stone: Isotherm study in Single and Binary Systems

The biosorption process of anionic dye Alizarin Red S (ARS) and cationic dye methylene blue (MB) as a function of contact time, initial concentration and solution pH onto olive stone (OS) biomass has been investigated. Equilibrium biosorption isotherms in single and binary systems and kinetics in batch mode were also examined. The kinetic data of the two dyes were better described by the pseudo second-order model. At low concentration, ARS dye appeared to follow a two-step diffusion process, while MB dye followed a three-step diffusion process. The biosorption experimental data for ARS and MB dyes were well suited to the Redlich-Peterson isotherm. The maximum biosorption of ARS dye, qmax = 16.10 mg/g, was obtained at pH 3.28 and the maximum biosorption of MB dye, qmax = 13.20 mg/g, was observed at basic pH values. In the binary system, it was indicated that the MB dye diffuses firstly inside the biosorbent particle and occupies the biosorption sites forming a monodentate complex and then the ARS dye enters and can only bind to untaken sites; forms a tridentate complex with OS active sites.

4-Amino-1,8-naphthalimide-based Tröger's bases as high affinity DNA targeting fluorescent supramolecular scaffolds

The synthesis and photophysical and biological investigation of fluorescent 1,8-naphthalimide conjugated Troger's bases 1-3 are described. These structures bind strongly to DNA in competitive media at pH 7.4, with concomitant modulation in their fluorescence emission. These structures also undergo rapid cellular uptake, being localized within the nucleus within a few hours, and are cytotoxic against HL60 and (chronic myeloid leukemia) K562 cell lines.

Food Colours: Existing and Emerging Food Safety Concerns

Food colours are added to different types of commodities to increase their visual attractiveness or to compensate for natural colour variations. The use of these additives is strictly regulated in the European Union, the United States and many other countries worldwide. There is a growing concern about the safety of some commonly used legal food colourants and there is a trend to replace the synthetic forms with natural products. Additionally, a number of dyes with known or suspected genotoxic or carcinogenic properties have been shown to be added illegally to foods. Robust monitoring programs based on reliable detection methods are required to assure the food is free from harmful colours. The aim of this review is to present an up to date status of the various concerns arising from use of colour additives in food. The most important food safety concerns in the field of food colours are lack of uniform regulation concerning legal food colours worldwide, possible link of artificial colours to hyperactive behaviour, replacement of synthetic colours with natural ones and the presence of harmful illegal dyes - both known but also new, emerging ones in food. The legal status of food colour additives in the EU, US and worldwide is summarized. The reported negative health effects of both legal and illegal colours are presented. The European Rapid Alert System for Food and Feed notifications and US import alerts concerning food colours are analyzed and trends in fraudulent use of colour additives identified. The detection methods for synthetic colours are also reviewed.

Glycosylation of Vitamin D Binding Protein Reduced in Juvenile Idiopathic Arthritis Patients At Risk of Disease Extension.

Background/Purpose:Juvenile idiopathic arthritis (JIA) comprises a poorly understood group of chronic, childhood onset, autoimmune diseases with variable clinical outcomes. We investigated whether profiling of the synovial fluid (SF) proteome by a fluorescent dye based, two-dimensional gel (DIGE) approach could distinguish the subset of patients in whom inflammation extends to affect a large number of joints, early in the disease process. The post-translational modifications to candidate protein markers were verified by a novel deglycosylation strategy.Methods:SF samples from 57 patients were obtained around time of initial diagnosis of JIA. At 1 year from inclusion patients were categorized according to ILAR criteria as oligoarticular arthritis (n=26), extended oligoarticular (n=8) and polyarticular disease (n=18). SF samples were labeled with Cy dyes and separated by two-dimensional electrophoresis. Multivariate analyses were used to isolate a panel of proteins which distinguish patient subgroups. Proteins were identified using MALDI-TOF mass spectrometry with vitamin D binding protein (VDBP) expression and siaylation further verified by immunohistochemistry, ELISA test and immunoprecipitation. Candidate biomarkers were compared to conventional inflammation measure C-reactive protein (CRP). Sialic acid residues were enzymatically cleaved from immunopurified SF VDBP, enriched by hydrophilic interaction liquid chromatography (HILIC) and analysed by mass spectrometry.Results:Hierarchical clustering based on the expression levels of a set of 23 proteins segregated the extended-to-be oligoarticular from the oligoarticular patients. A cleaved isoform of VDBP, spot 873, is present at significantly reduced levels in the SF of oligoarticular patients at risk of disease extension, relative to other subgroups (p<0.05). Conversely total levels of vitamin D binding protein are elevated in plasma and ROC curves indicate an improved diagnostic sensitivity to detect patients at risk of disease extension, over both spot 873 and CRP levels. Sialysed forms of intact immunopurified VDBP were more prevalent in persistent oligoarticular patient synovial fluids.Conclusion:The data indicate that a subset of the synovial fluid proteome may be used to stratify patients to determine risk of disease extension. Reduced conversion of VDBP to a macrophage activation factor may represent a novel pathway contributing to increased risk of disease extension in JIA patients.

Polioxometalatos: dos agregados moleculares a redes e materiais

Esta dissertação teve como objectivo principal a preparação de novos materiais luminescentes contendo lantanopolioxometalatos. Foram utilizados polioxometalatos (POMs) do tipo Keggin, Wells-Dawson e [Ln(M5O18)2]9- com M (VI) = W, Mo contendo diferentes iões lantanídeo. Foram sintetizados materiais híbridos orgânico-inorgânicos com base em lantanopolioxometalatos e ligandos orgânicos. O efeito da coordenação destes ligandos orgânicos na luminescência dos iões lantanídeo (efeito de antena) foi investigado para os ácidos picolínico e 3-hidroxipicolínico. Os estudos de fotoluminescência destes materiais permitiram mostrar a existência de um processo de sensitização da emissão dos iões lantanídeo através de fenómenos de transferência de energia dos ligandos e do POM para o centro emissor. No caso particular dos materiais híbridos contendo POMs do tipo Wells-Dawson, a introdução do ligando orgânico levou à intensificação da absorção de energia através do POM, a qual era praticamente inexistente nos correspondentes lantanopolioxometalatos. Prepararam-se nanocompósitos do tipo “core/shell” contendo POMs e híbridos orgânico-inorgânicos como núcleo rodeados por uma camada de sílica. Os nanocompósitos preparados apresentam uma estrutura “core/shell” bem definida com um diâmetro médio de aproximadamente 35 nm. As técnicas de microscopia electrónica, nomeadamente o mapeamento por EDX, permitiram confirmar a presença dos POMs no núcleo das nanopartículas de sílica. A biofuncionalização destes nanocompósitos com um anticorpo foi estudada, com vista à potencial aplicação destes sistemas como biomarcadores ópticos. Os estudos de microscopia de fluorescência permitiram observar a emissão do Eu3+ presente nas nanopartículas biofuncionalizadas com o anticorpo, utilizando excitação na zona do ultravioleta. Estes resultados reforçam a viabilidade da aplicação destes sistemas como marcadores celulares em alternativa a “quantum dots” e corantes orgânicos. No âmbito dos nanomateriais, foi também preparado um material constituído por partículas de Na9[Eu(W5O18)2] de dimensões nanométricas, utilizando micelas invertidas como nanoreactores, de forma a limitar o tamanho das partículas. Foi realizada a preparação de novos materiais lamelares luminescentes por intercalação de POMs e respectivos materiais híbridos em argilas aniónicas de zinco e alumínio. A intercalação foi realizada através de um método de troca aniónica directa usando uma argila contendo nitrato como anião precursor. O estudo por difracção de raios-X revelou-se uma técnica fundamental na caracterização destes materiais, nomeadamente através da determinação da altura de galeria. A partir deste parâmetro foi possível verificar a orientação da espécie intercalada na argila. No caso da intercalação do anião do tipo Keggin, o estudo por RMN de 31P MAS permitiu identificar a espécie intercalada na argila. As propriedades de luminescência foram estudadas para a generalidade dos novos materiais preparados.

Gas liquid equilibria at high pressures

Este trabalho tem como objectivo a medição da solubilidade de gases em líquidos a altas pressões. Para a realização experimental foi usada uma célula de altas pressões de volume variável e um método de observação directa para a detecção das transições de fase. As condições usadas neste trabalho experimental foram temperaturas entre 276.00 e 373.15 K e pressões ate 100 MPa. Numa primeira fase foram efectuadas medições de solubilidade de metano em anilina pura e para uma solução aquosa de composição mássica igual a 5% em anilina. A anilina é fundamentalmente usada em processos como a produção de borracha, de poliuretanos, pigmentos e tintas, fármacos, herbicidas e fungicidas. É usualmente produzida através de processos de redução do nitrobenzeno por reacção com o HCl. De facto, esta síntese é um processo químico complexo onde um grande número de processos compete entre si. Alterações nas condições do processo com a possível formação de produtos intermediários podem afectar a eficiência do processo. Para a sua melhoria foi sugerido que o hidrogénio usado fosse simultaneamente produzido e gasto no reactor principal. Neste caso e para a produção do mesmo, era necessário adicionar metano e água ao reactor. Tendo por base a ideia de que as reacções onde o hidrogénio é reagente e produto ocorrem em simultâneo, torna-se clara a importância do estudo da solubilidade do metano em anilina pura e em soluções aquosas desta. Numa segunda fase foi estudada a solubilidade do dióxido de carbono em soluções aquosas de tri-iso-butil(metil)fosfónio tosilato, com composições molares são de 4, 8 e 12% em líquido iónico. Este pertencente à família dos fosfónios. Possui uma viscosidade e densidade elevadas, é térmica e quimicamente estável e ainda possui uma elevada polaridade. Apresenta uma miscibilidade completa em água e nos solventes mais usuais, como o diclorometano e tolueno, não sendo no entanto míscivel em hexano. O tri-isobutil( metil)fosfónium tosilato é usado como solvente nos processos de hidroformilação de olefinas e ainda em processos de captura e conversão de dióxido de carbono. Neste trabalho experimental, a temperatura e a pressão foram inicialmente aumentadas até o sistema atingir o equilíbrio. A pressão é diminuída lentamente até se verificar o aparecimento/desaparecimento da última bolha de gás. A pressão à qual a última bolha de gás desaparece representa a pressão de equilíbrio para aquela temperatura. Este procedimento foi efectuado para vários sistemas e várias temperaturas.

Optical fiber sensing using quantum dots

Recent advances in the application of semiconductor nanocrystals, or quantum dots, as biochemical sensors are reviewed. Quantum dots have unique optical properties that make them promising alternatives to traditional dyes in many luminescence based bioanalytical techniques. An overview of the more relevant progresses in the application of quantum dots as biochemical probes is addressed. Special focus will be given to configurations where the sensing dots are incorporated in solid membranes and immobilized in optical fibers or planar waveguide platforms.

Corroles : synthesis, functionalization and application as chemosensors

O trabalho de investigação apresentado nesta dissertação foi desenvolvido tendo como objectivo a síntese e funcionalização de meso-triarilcorróis para utilização como quimiossensores. Este trabalho encontra-se apresentado ao longo de cinco capítulos. No primeiro capítulo são apresentadas as características gerais, as metodologias de síntese e de funcionalização de macrociclos de tipo corrólico, e descrevemse algumas aplicações em que têm sido utilizados. São ainda abordadas algumas das propriedades e características dos quimiossensores e os mecanismos de deteção de diversos analítos. No segundo capítulo, após uma pequena introdução às reações de Wittig e de Diels-Alder, escolhidas para a funcionalização do macrociclo corrólico, descreve-se o estudo efectuado para a obtenção do complexo de gálio(III) do 3- vinil-5,10,15-tris(pentafluorofenil)corrol e o seu comportamento como dieno, em reações de Diels-Alder na presença dos dienófilos 1,4-benzoquinona e 1,4- naftoquinona. Desses estudos resultaram dois aductos cuja habilidade sensorial, bem como a dos seus precursores, foi estudada, em solução, na presença de aniões esféricos (F-, Br-, Cl-), lineares (CN-) e volumosos (CH3COO-, H2PO4 -). Dos macrociclos estudados verificou-se que o corrol base-livre 5,10,15-tris(pentafluorofenil)corrol apresenta uma elevada sensibilidade para o anião fluoreto (F-), e que a coordenação do núcleo corrólico com gálio(III) diminui a afinidade para este anião. Em geral, todos os compostos mostraram afinidade para o anião cianeto (CN-) mesmo quando em suportes poliméricos. O gel de poliacrilamida revelou-se muito promissor na determinação de CN- em amostras de água. No terceiro capítulo é avaliada a reatividade do complexo de gálio(III) do 3- vinil-5,10,15-tris(pentafluorofenil)corrol ainda como dieno mas agora na presença de um dienófilo linear, o acetilenodicarboxilato de dimetilo. Desse estudo resultaram dois novos derivados corrólicos. A habilidade sensorial dos mesmos perante os aniões fluoreto, cianeto, acetato, e fosfato foi avaliada por espectroscopia de absorção e emissão tendo um dos aductos mostrado ser colorimétrico para o anião cianeto. No quarto capítulo descreve-se a síntese e caracterização de dois conjugados do tipo corrol-cumarina, resultantes de reações de Hetero-Diels-Alder entre o 3-vinil-5,10,15-tris(pentafluorofenil)corrolatogálio(III)(piridina) e orto-quinonasmetídeos gerados in situ a partir de reacções de Knoevenagel entre cumarinas e paraformaldeído. Realizaram-se estudos de afinidade sensorial para aniões e catiões com estes macrociclos, bem como com conjugados porfirinacumarina análogos. A inserção de uma unidade cumarina conferiu uma excepcional solubilidade tendo os novos derivados apresentado solubilidade em etanol. No quinto e último capítulo desta dissertação é avaliada a capacidade sensorial do 5,10,15-tris(pentafluorofenil)corrol e da sua espécie monoaniónica, para os catiões metálicos Na+, Ca2+, Cu2+, Cd2+, Pb2+, Hg2+, Ag+, Al3+, Zn2+, Ni2+, Cr3+, Ga3+, Fe3+ em tolueno e acetonitrilo. Os macrociclos corrólicos mostraram ser selectivos e colorimétricos para o catião Hg2+. Neste trabalho descreve-se ainda a síntese do derivado -iminocorrol, que após funcionalização com o 3-isocianatopropiltrimetoxisilano originou um derivado do tipo alcoxisilano, que foi, posteriormente, ancorado a nanopartículas comerciais de sílica. As novas nanopartículas ancoradas com o alcoxisilano corrol foram estudadas na presença de Cu2+, Hg2+ e Ag+. Na presença do catião Ag+ assistiu-se a uma mudança de cor, de verde para amarelo.