Biologia de Agistemus brasiliensis Matioli, Ueckermann & Oliveira (Acari: Stigmaeidae) e sua potencialidade de predação sobre Brevipalpus phoenicis (Geijskes) (Acari: Tenuipalpidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características produtivas e imunológicas de frangos de corte submetidos a dietas suplementadas com cromo, criados sob diferentes condições de ambiente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of microbial numbers in soils by using various culture media and temperatures

The influence of different media and incubation temperatures on the quantification of microbial populations in sorghum, eucalyptus and forest soils was evaluated. Microbial growth was compared by using complex (tryptone soybean agar, TSA, casein-starch, CS, and Martin) and saline (Thorton, M3, Czapeck) media and incubation temperatures of 25 and 30° C. Higher numbers of total bacterial. and fungal colony-forming units (CFU) were observed in sorghum soils, and of spore-forming and Gram-negative bacteria in forest soils than other soils. Actinomycetes counts were highest in forest soil when using CS medium at 30° C and in sorghum soil at 25° C in M3 medium. Microorganism counts were dependent on the media and incubation temperatures. The counts at temperatures of 30° C were significantly higher than at 25° C. Microbial quantification was best when using TSA medium for total. and spore-forming bacteria, Thorton for Gram-negative bacteria, M3 for actinomycetes, and Martin for fungi. © 2005 Elsevier GmbH. All rights reserved.

Precocidade na emissão da raiz primária para avaliação do vigor de sementes de milheto

In a program of seed quality assurance, the evaluation of seed vigor is fundamental and necessary to the global production process outcome. The objective of this study was to evaluate the efficiency of the precocity of primary root emission test, for the substrates paper roll, on paper and between papers, on vigor of pearl millet seeds. Ten seed lots evaluated in four replication of 100 pearl millet seeds cultivar ADR 500 were sown in three different humidified substrates: between papers, paper roll and on paper. These were incubated at a temperature of 20-30 degrees C. Fifteen hours after the germination test was established, the emission of seed primary roots started to be observed every 2 hours up to 25 hours and then after 48 hours. For the comparison among lots, seeds were also evaluated by moisture content, weight of 1000 seeds, germination and vigor (first count, electrical conductivity, accelerated aging and seedling emergence). The statistical design was completely randomized, and the means comparisons were accomplished by the Tukey test at 0.05 level of probability. It was concluded that the precocity of primary root emission test on paper is promising for vigor evaluation of pearl millet seeds.

Germination of Albizia hassleri seeds at different temperatures, under laboratory conditions

The objective of this study was to analyze the germination of seeds of Albizia hassleri under different temperatures. A completely random design arranged as a split plot for temperatures regimes, with 11 seed lots and four replications of 15 seeds was used. The plot was represented by the various lots and the sub plots for different temperatures. The means were compared by Scott-Knott test at 5% probability. The temperatures used were: a) constant: 20, 25 and 30 degrees C, and b) alternating: 20-30 and 25-35 degrees C. For all 11 seed lots the mean germination was 90%, speed germination index (IVG) was 5.059, fresh matter of seedlings (MMF) was 0.0628 g and dry matter (MMS) 0.0499 g. The variation coefficient (CV) between plots ranged from 8.48% for germination to 51.71% for dry matter of seedlings and sub plot of 6.77% to 60.45% for germination and MMS. These high values of CV, tested for MMS and MMF, indicate low repeatability of results within each treatment. In general, the IVG obtained at temperatures of 20 and 25 degrees C was lower than those in temperatures of 30, 20-30 and 25-35 degrees C. The best temperature for IVG was the alternating 25-35 degrees C and constant 30 degrees C. The germination test can be conducted at 30, 20-30 and 25-35 degrees C for 19 days.

Temperature and Scarification Effects on the Germination of Syagrus picrophylla Seeds, a Brazilian Native Palm

Syagrus picrophylla belongs to the Arecaceae family. Its propagation is made by seeds; however there is a lack of information in the literature about its seed germination. The objective of this work was to evaluate the effects of temperature and scarification on the germination of S. picrophylla seeds. The experiment was carried out at the State University of São Paulo, Jaboticabal Campus, Brazil. The experimental design was entirely randomized in a factorial arrangement 5 x 2 (five temperature conditions combined with or without mechanical scarification. The number of germinated seeds that showed primary root protrusion was noted daily, and when the germination was stabilized, the germination (%G) and germination rate (GR) were calculated. The analysis of variance (ANOVA) was carried out for means comparing by the Tukey test at 5% confidence level. It was concluded that the greatest %G were obtained at 20-30 degrees C (62%) and 25-35 degrees C (59%) alternated temperatures; %G and GR were similar for both scarified and non-scarified seeds, and there was a faster germination at 20-30 degrees C alternated temperature.

Germinação de sementes de Dypsis decaryi(Jum.) Beentje & J. Dransf. (Arecaceae)

Dypsis decaryi (Jum.) Beentje & J. Dransf. is an important palm with ornamental commercial value. Although it reproduces sexually, there are no data available as far as what are the factors that affect this species seed germination. The purpose of this work is to study the potential effects of temperature and substrate in Dypsis decaryi seed germination. The research framework is based on randomization, using a 6 X 2 factorial schema (six different temperatures, 25 degrees C, 30 degrees C, 35 degrees C, 20-30 degrees C, 25-35 degrees C and room temperature, combined with two types of substratum, sand and vermiculite) with 5 repetitions of 20 seeds. The researcher made daily records on the number of germinated seeds, and the criteria used was protusion of the germination plug. After 35 days data become stable. The Index of Germination Speed (IVG) and germination percentage were then calculated (data were converted to sen). The averages for these two indexes were compared using the Scott-Knott method with a probability of 5%. The data show that the higher percentages of germination were obtained with a sand substratum at temperatures of 25 degrees C (86%), 25-35 degrees C (92%) and lab room temperature (93%), and with a vermiculite substratum, at temperatures of 25 degrees C (76%), 30 degrees C (83%), 20-30 degrees C (87%), 25-35 degrees C (80%) and room temperature (91%). The seeds germinated sooner in the lab environment, for both substrates. The percentage of germination at 35 degrees C was markedly lower, both on sand (21%) and vermiculite (38%). In this case, the seeds took longer to germinate and germination was not uniform.

Temperatura e substrato para o teste de germinação de sementes de pinhão-manso

Official rules for seed analysis don't establish criteria to execute germination tests for all species. This way, the aim of this research was to determinate the substrate, temperature and counting time for the germination test of physic nut seeds. For the germination test, four replications of 20 seeds were used, evaluating daily the normal seedlings until the end of germination. Initially, the substrates with sowing in vermiculite, were evaluated in rolled paper towels, in sand and in soil using alternating temperature of 20-30 degrees C. The most favorable substrates for germination were evaluated with another stage, using constant temperatures of 25, 30 and 35 degrees C and alternating ones, of 15-35 degrees C, 20-35 degrees C and 20-30 degrees C. One concluded that the germination test of physic nut seeds must be performed with the alternating temperature of 20-30 degrees C in sand or paper towel and with final counting 10 days after sowing.

Temperatura e substrato para a germinação de sementes de Piptadenia moniliformis Benth.

In germination tests, substrate and ideal temperature are important for providing favorable conditions for the germination of seeds and the eventual development of seedlings. This research aimed at evaluating the effects of temperature and substrate on the germination of Piptadenia moniliformis Benth seeds. Two trials were done. In the first, seeds were submitted to germination under constant temperatures of 5 to 40 degrees C (increases of 5 degrees C) and alternated temperatures of 20-25, 25-30, 30-35, 20-30, 25-35 and 20-35 degrees C on paper. In the second trial, temperatures of 25, 20-30 e 20-35 degrees C were used in the substrates on (OP) and between paper (BP), on (OS) and between sand (BS), on (0V) and between vermiculite (BV) and paper roll (PR). The following traits were evaluated: percentage of seeds with protrusion of primary root and normal seedlings; speed germination index; length of primary root and of the hypocotyls and the dry mass of seedlings. A completely randomized design was used with 14 treatments. In the first experiment and a factorial scheme of 7 x 3 (7 substrates and 3 temperatures) was used in the second with four replicates of 25 seeds each. In the first experiment the constant temperatures of 25 e 30 degrees C and the alternated of 20-30 e 20-35 degrees C provided best results for the germination of seeds. In the second, the temperature of 25 C associated with the substrates BP, BS and BV surpassed the other treatments proving adequate for carrying out the germination tests of Piptadenia moniliformis Benth seeds.

Vermiculita como substrato para o teste de germinação de sementes de ipê-amarelo

Vermiculite is a substrate used in seedling production of forest species and can be an option for the germination test of ipe seeds. The objective of this research was to evaluate the use of vermiculite in the germination test of Tabebuia chrysotricha seeds and to stablish appropriate particle size and moisture for this substrate. Four replications of 20 seeds were sown in soil, sand, paper rolls, and vermiculite with different particle sizes: micron (0.15-0.20 mm), superthin (0.21-0.30 mm), thin (0.30-0.50 mm) and medium (0.50-1.19 mm) moistened with water equivalent to 0.5, 1.0, 1.5 and 2.0 times the weight of the dry subtrate. Germination test was carried out at 30 degrees C. The percentage of normal seedlings was obtained seven days after sowing (first count) and then weekly until 28 days, when abnormal seedlings and dead seeds were also counted. It was concluded that the germination test of ipe seeds can be carried out with thin or medium vermiculite moistened with water equivalent to 1.5 times the dry weight of the substrate. These treatments resulted in higher and faster germination (21 days).

Modelling energy utilisation in broiler breeder hens

1. The objective of this study was to determine a metabolisable energy ( ME) requirement model for broiler breeder hens. The influence of temperature on ME requirements for maintenance was determined in experiments conducted in three environmental rooms with temperatures kept constant at 13, 21 and 30 degrees C using a comparative slaughter technique. The energy requirements for weight gain were determined based upon body energy content and efficiency of energy utilisation for weight gain. The energy requirements for egg production were determined on the basis of egg energy content and efficiency of energy deposition in the eggs.2. The following model was developed using these results: ME = kgW(0.75)(806.53 - 26.45T + 0.50T(2)) + 31.90G + 10.04EM, where kgW(0.75) is body weight (kg) raised to the power 0.75, T is temperature (degrees C), G is weight gain (g) and EM is egg mass (g).3. A feeding trial was conducted using 400 Hubbard Hi-Yield broiler breeder hens and 40 Peterson males from 31 to 46 weeks of age in order to compare use of the model with a recommended feeding programme for this strain of bird. The application of the model in breeder hens provided good productive and reproductive performance and better results in feed and energy conversion than in hens fed according to strain recommendation. In conclusion, the model evaluated predicted an ME intake which matched breeder hens' requirements.

Composição centesimal da carne de cordeiros submetidos a dietas com diferentes teores de concentrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Production of fibrolytic enzymes by Aspergillus japonicus C03 using agro-industrial residues with potential application as additives in animal feed

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da temperatura ambiente e do sistema de criação sobre as exigências de energia metabolizável para mantença de aves reprodutoras pesadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade pós-colheita de mangas, não-refrigeradas, e submetidas ao controle da ação do etileno

O presente trabalho objetivou-se na caracterização físico-química de mangas cv. Tommy Atkins e Haden, submetidas ao controle da ação do etileno, através da exposição dos frutos à ação de adsorvedores de etileno. Os frutos colhidos em estádio de fisiologicamente maturos foram embalados em filmes de polietileno de baixa densidade (PEBD) de 0,006 mm de espessura, com ou sem o sachê de adsorção de etileno, e acondicionados em embalagens de papelão (0,65 x 0,52 m), sem o controle da temperatura e da umidade relativa (30 ± 3 ºC e 70 ± 5 % de U.R.). Os tratamentos ficaram constituídos dessa maneira: T1 - mangas cv. Tommy Atkins, com o sachê de adsorção; T2 - mangas cv. Tommy Atkins, sem o sachê de adsorção; T3- mangas cv. Haden com o sachê de adsorção, e T4 - mangas cv Haden sem o sachê de adsorção. As análises de firmeza de polpa, sólidos solúveis (SS), acidez titulável (AT), pH, ácido ascórbico e concentração de etileno foram realizadas na instalação do experimento (dia 0), e aos 7; 14; 21; 28 e 35 dias; e aos 35 dias foi realizado um teste de preferência. Ao final do experimento, observou-se que, em ambas as cultivares, a menor concentração de etileno nas embalagens, a maior firmeza de polpa, a maior contenção no avanço e na diminuição do SS e AT, respectivamente, bem como a melhor manutenção do conteúdo de ácido ascórbico foram detectadas nos frutos acondicionados em embalagens contendo o sachê de adsorção de etileno. Não foram detectadas variações significativas nos valores de pH. No teste de preferência, houve variação significativa, onde os frutos acondicionados sob ação do adsorvedor de etileno foram preferidos por parte dos julgadores.