Sobre el papel del bibliotecólogo

Sin duda el lenguaje fue el primero y más importante instrumento, utilizado en sus inicios, por el hombre para transmitir los conocimientos e información adquirida.Mediante este medio y la memoria, se conservaron y transmitieron tradiciones, rituales, leyendas, plegarias y toda clase de conocimientos de generación en generación. Por ejemplo, en la antigüedad los ancianos de Israel usaban la "mnemotecnia" para transmitir el patrimonio religioso y cultural de su pueblo. Estos podían memorizar el Talmud y la Biblia sin problema y transmitirlos a sus descendientes y discípulos.Con el surgimiento de la escritura, en la noche de los tiempos, el hombre se da cuenta de que sus pensamientos y conocimientos es posible estamparlos por medio de símbolos en rocas, corteza vegetal y cualquier otro material a su alcance, logrando mayor permanencia y tangibilidad. Esto provocó la producción y acumulación de tablillas, papiros y otros materiales escritos, que debían ser custodiados y conservados por personas, que en las bibliotecas más antiguas correspondió a los sacerdotes (pues muchas estaban ubicadas en los templos por considerarse obras sagradas) o al cuidado de sabios y letrados como en la antigua Alejandría.

Delirium rupestris. Caosmosis y creación artística

330 p.

Interaction of ions, electrons, and laser pulses with surfaces

133 p.

Preparación y caracterización de biomateriales híbridos de hidroxiapatito con fosfonato (2-Hidroxi fosfonoacetato)

El hidroxiapatito es el biomineral de los tejidos duros de los mamíferos y por ello ha sido ampliamente estudiado como biomaterial en cementos óseos, recubrimientos de metales implantables y scaffold en ingeniería de tejidos. En este trabajo, se estudia un proceso síntesis y caracterización de un derivado de este material, donde el ion fosfonato: 2- hidroxifosfonoacetato sustituye parcialmente al ion fosfato [1-10%]. El proceso de síntesis de hidroxiapatito consiste en dos etapas: (1) una reacción a 100ºC entre el ácido fosfórico (añadido lentamente) y una mezcla de hidróxido de calcio + 2-hidroxifosfonoacetato de calcio (Relación Ca/P=1.67). (2) un tratamiento térmico de los sólidos obtenidos en (1) a 150ºC. Los productos finales se han caracterizado mediante análisis químico, análisis termogravimétrico, difracción de rayos-X con análisis de Rietveld, microscopía SEM y determinación de la superficie específica y porosidad. En las fases cristalinas, el grado de pureza de los hidroxiapatitos oscila entre 91-100%. Todos presentan estructura monoclínica, en contraste con la estructura hexagonal que habitualmente se obtiene aplicando métodos de síntesis similares. Esta variación se atribuye a la presencia de fosfonato. El contenido de éste también influye en la morfología y en la porosidad de los materiales, siendo las muestras con más fosfonato las más porosas. Los materiales, al menos aquellos con una cantidad menor o igual 5% de fosfonato, muestran una biocompatibilidad similar a un material de hidroxiapatito de referencia.

Modern advances in glass-coated microwires: A significant distinction as a soft magnet

174 p.

Aislamiento, producción y evaluación de la patogenicidad de cepas de Hirsutella citriformis Speare para el control de Diaphorina citri Kuwayama, vector de la enfermedad Huanglongbing de los cítricos

La industria citrícola es una de las más importantes industrias con las que cuenta el país y en los últimos años se encuentra amenazada por una plaga que está ocasionando estragos en todas las áreas citrícolas en México, el Huanglongbing o greening la cual es transmitida por el psílido asiático de los cítricos, Diaphorina citri Kuwayama, insecto que ocasiona daño en las plantas al alimentarse de los brotes tiernos y que además es el vector de la bacteria Candidatus Liberibacter asiaticus para la cual no hay cura y por lo que es necesario controlar al insecto que la transmite. Por lo que el presente trabajo consistió en aislar hongos de D. citri micosados, identificarlos en base a sus características morfométricas y usando técnicas moleculares, cultivarlos en diferentes medios de cultivo comerciales de agar para seleccionar aquel en el cual crecen y conidian mejor, se determinó también el tipo de exudados producidos por Hirsutella citriformis en los medios de agar, se cultivaron en dos diferentes medios de cultivo líquido y un sustrato vegetal para obtener mayor cantidad de conidios; también se realizaron bioensayos de laboratorio para determinar la virulencia de las cepas y seleccionar aquellas que pudieran controlar mejor al insecto; se evaluó la patogenicidad que pudieran presentar sobre insectos depredadores de D. citri, y con los resultados obtenidos se seleccionó las cepas que presentaron mayor patogenicidad sobre el insecto vector del HLB para evaluar su actividad sobre el mismo en bioensayo de campo. Se aislaron cinco cepas de insectos micosados provenientes de diferentes regiones citrícolas, se trabajó con ellos además de tres cepas con las cuales ya contaba el INIFAP de General Terán de Nuevo León. Se identificaron morfométrica y molecularmente como Hirsutella citriformis Speare. Los medio comerciales de cultivo en los cuales crecen y presentan mejor conidiación son los medios agar papa dextrosa enriquecidos con extracto de levadura al 0.5 y 1 % en los cuales se obtuvo un crecimiento radial de 3.2 a 3.8 cm para las cepas IB-Hir-2 e INIFAP-Hir-1 respectivamente, a los 34 días de cultivo a 25 ± 1 °C. La conidiación obtenida para las ocho cepas no correspondió al crecimiento radial, pero si concordó en presentarse en los medios enriquecidos con extracto de levadura, los valores variaron desde 1.22 x 10⁶ a 2.79 x 10⁷ para las cepas 2 INIFAP-Hir-2 en agar papa dextrosa e IB-Hir-2 en agar papa dextrosa con extracto de levadura al 1% respectivamente. En medios líquidos la mayor producción de blastosporas obtenida fue 4.3 x 108 blastosporas /ml a los 9 días en el medio de casaminoácidos para la cepa INIFAP-Hir-1, y en caldo papa dextrosa la mayor producción la presentó a los 11 días la cepa IB-Hir-2 (7.7 x 107 blastosporas/ml). La mayor producción de conidios en el sustrato vegetal (arroz) se obtuvo a los 14 días por la cepa INIFAP-Hir-4 (1.97 x 107 conidios/gr). Se analizaron los dos tipos de exudados observados en las cepas usando los métodos de Bradford para proteínas y el del Fenol Sulfúrico para carbohidratos y con estos métodos se determinó que todas las cepas producen ambos tipos de compuestos, además de que las proteínas son los exudados amarillo claro y oscuro, mientras que los carbohidratos corresponden a las gotas cristalinas producidas por las cepas en los diferentes medios de agar. En los diferentes bioensayos de laboratorio las cepas presentaron mayor mortalidad cuando se inoculó por contacto, donde las cepas INIFAP-Hir-1, INIFAP-Hir-2, IB-Hir-1 e IB-Hir-2 mostraron los mayores porcientos de mortalidad media. Al evaluar la patogenicidad de cuatro cepas sobre dos depredadores de D. citri, los resultados fueron similares para tratamientos y testigo y no se presentó micosamiento en los insectos muertos. Bajo condiciones de laboratorio la CL50 y CL90 obtenidas para el aislado INIFAP-Hir-1 fueron, 34 x 105 y 26.7 x 107 respectivamente. En el bioensayo de campo se usaron las cepas INIFAP.Hir-2, INIFAP.Hir-4, IB-Hir-1 e IB-Hir-2 y el mayor porciento de mortalidad obtenida fue 51.049 y el menor 35.7 para las cepas INIFAP-Hir-4 e IB-Hir-1 respectivamente, mientras que el testigo con adherente mostro 6.059 y en el testigo absoluto 4.84 % de mortalidad promedio. Además logramos aislar la cepa que los micosaba de 20 insectos colectados en diferentes puntos de muestreo, identificando en base a sus características morfológicas de crecimiento colonial a tres de las cepas evaluadas y a la cepa nativa de Martínez de la Torre.

Avaliação do desempenho do aço D6 tratado termicamente e netretado em plasma com gaiola catódica visando aplicação industrial

In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples

Avaliação do desempenho do aço AISI D2 tratado termicamente e nitretado em plasma com gaiola catódica visando aplicação industrial

In the research, steel samples tool AISI D2, treated thermally, in the conditions: relief of tension, when maximum, seasoned and seasoned was treated thermally in the temperature of revenimento and revenida had been nitrited in plasma with cathodic cage, in atmosphere of 80%N2:20%H2. One used pressure of 2,5 mbar, 400 and 480°C temperatures with treatment time of 3 and 4 hours, with the objective to evaluate its performance in pipes cut tool. It was compared that the performance of the same steel when only thermally treated, both with tension relief. It was evaluated its hardness. Microstructural aspects (the layer thickness, interface, graisn size, etc) and crystalline phases on the surface. Besides, it was verified accomplishment possibility of nitriding simultaneous to annealing treatment. The tempering samples had presented hardness levels of 600 HV, while in nitrited samples these values had been 1100 HV

Tratamento termoquímico do titânio auxiliado por plasma de ar - N2 - O2

Discs were grade II cp Ti oxynitride by plasma of Ar - N2 - O2 using different proportions of individual gases. These ratios were established from analysis of optical emission spectroscopy (OES) of plasma species. The proportions that resulted in species whose spectra showed an abrupt change of light intensity were chosen for this study. Nanohardness tests revealed that there was a correlation between the intensity of N2 + species with the hardness, because the treatments where they had a higher intensity, obtained a higher value nanohardness, although the crystalline phases have remained unchanged. With respect to topography, it was observed that in general, the surface roughness is related to the intensities of plasma species, because they may have different values depending on the behavior of the species. Images obtained by optical microscopy revealed a surface with grains of different colors to optical reflectance showed a peak of reflection in the red area. Measures the contact angle and surface tension showed hydrophilic properties and hydrophilic with little variation of polar and dispersive components of surface tension

Síntesis, caracterización y estudio de compuestos de coordinación con el ligando N,N¿dimetil-N-N-bis(2-hidroxi-3-metoxi-5-metilbencil) etilendiamina (H2L)

257 p.

A malhação do Judas: rito e identidade

This work is about representations around the Mockery of Judas rite in the neighborhood of east zone at Natal city and the relationships between residents of neighborhood with the ritual object. The most important objective in the work is to present anthropological analysis about the mockery of Judas rite and the ritual process beyond local interpretations to rite. The concept presents in studies of Marcel Mauss, Henry Hubert and René Girard about the sacrifice are very important to this paper. We work with this hypothesis that the Mockery of Judas is sacrifice done to residents of Rocas neighborhood to many purpose, since symbolic punishment to traitor apostle till the sacrifice of victm of conflicts and tensions inside the neighborhood

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo da viabilidade do sistema LZAS para uso como selante de PaCOS

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet