Navegación de un robot móvil sobre terreno irregular con contacto de su brazo con el suelo

En esta tesis se aborda el problema de la navegabilidad de robots móviles sobre terrenos irregulares, los cuales poseen diferentes inclinaciones y variedad de obstáculos. Este tema constituye actualmente una línea de investigación activa dirigida al desarrollo de nuevos robots y, adicionalmente, enfocada al desarrollo de estrategias de navegación eficientes y con el mínimo riesgo de inutilización. En primer lugar se desarrolló el robot móvil Lázaro para navegar en este tipo de terrenos, el cual posee un brazo articulado con una rueda como efector final. Esta rueda le permite al brazo mantener un punto de contacto adicional con el suelo que puede ayudar al robot a compensar situaciones de inestabilidad y sobrepasar algunos obstáculos que pudieran presentarse en estos entornos. Posteriormente, se desarrollaron tres medidas cuantitativas que permiten evaluar la navegabilidad de cualquier robot móvil cuando transita sobre terreno irregular. Estas tres medidas son: un índice de estabilidad, el cual evalúa la propensión al vuelco; un índice de direccionamiento, el cual evalúa la disponibilidad del robot para direccionarse y seguir una trayectoria dada y, por último, un índice de deslizamiento, el cual evalúa la propensión del robot a deslizarse hacia abajo cuando se desplaza sobre superficies inclinadas. Finalmente, se definieron un conjunto de maniobras que puede ejecutar Lázaro y que están dirigidas a garantizar la navegación cuando el robot se desplaza sobre superficies inclinadas o cuando debe sobrepasar obstáculos tales como escalones, rampas o zanjas. Todas las estrategias diseñadas se fundamentan en el uso del brazo como herramienta adicional que posee el robot para mejorar su navegabilidad.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Mimicking the behaviour of idiotypic AIS robot controllers using probabilistic systems

Previous work has shown that robot navigation systems that employ an architecture based upon the idiotypic network theory of the immune system have an advantage over control techniques that rely on reinforcement learning only. This is thought to be a result of intelligent behaviour selection on the part of the idiotypic robot. In this paper an attempt is made to imitate idiotypic dynamics by creating controllers that use reinforcement with a number of different probabilistic schemes to select robot behaviour. The aims are to show that the idiotypic system is not merely performing some kind of periodic random behaviour selection, and to try to gain further insight into the processes that govern the idiotypic mechanism. Trials are carried out using simulated Pioneer robots that undertake navigation exercises. Results show that a scheme that boosts the probability of selecting highly-ranked alternative behaviours to 50% during stall conditions comes closest to achieving the properties of the idiotypic system, but remains unable to match it in terms of all round performance.

Simulador cinemático de un robot manipulador industrial

Este trabajo fin de grado trata sobre la implementación de un simulador cinemático de un robot manipulador industrial, orientado al aprendizaje de los principios de programación y desarrollado mediante la herramienta de software matemático MATLAB, dicho simulador debe tener como características principales ser capaz de emular las características de programación que incorporan los lenguajes a nivel robot y resultar fácilmente accesible a los alumnos de las ingenierías. Asimismo, el simulador tendrá la capacidad de definir los objetos que integran el entorno físico que rodean al robot con el objeto de simular la interacción cinemática del brazo manipulador con dicho entorno. Para ello, primero se realizará un estudio de los lenguajes de nivel robot, en este caso concreto V+, con el objeto de elaborar un catálogo de funciones y estructuras relevantes, concretamente se trataran las estructuras de datos, funciones del robot, etc. A partir de estos, se elaborarán las especificaciones que debe cumplir el simulador cinemático. Por último se realizarán unas prácticas sobre el simulador orientadas al aprendizaje y elaboración de los manuales de usuario del mismo.

Construcción de un prototipo de robot sembrador de maíz Agrobot II

64 p.

CLARK - Smart Clinic Assistant Robot for CGA

En esta presentación se exponen la arquitectura general y el estado actual de desarrollo del sistema CLARK. Dicho sistema tiene como objetivo el despliegue de un asistente robótico para ayudar a un médico en la realización de procedimientos CGA (Comprehensive Geriatric Assessment), de forma que ciertas tareas, tales como la realización de cuestionarios o pruebas de movimiento, puedan ser realizadas por el robot de forma paralela al resto del procedimiento CGA, aumentando así su eficiencia.

Robot acuático hidrostático espectral de rayos laser, para el control larvario de mosquitos de importancia médica en Salud Pública.

Diseñar y construir un robot acuático que destruya la presencia de larvas o pupas de mosquitos en contenedores de agua. Se construyó y se diseñó un robot con materiales reciclables construido con tubos de cañería PVC, lupa, sensores de luz y barrera, motor de fuente 110 v, resistencias, LCR, cargador 9 v y focos led, para que destruya larvas de mosquitos en un contenedor de agua. Como resultado hay una cero prevalencia de índice larvario porque el robot detecta presencia larvaria con sensores y rayos laser activándose automáticamente con el efecto de succión y destrucción larvas en su interior eliminándolas desechas al utilizar filtros de 10 micras y aspas metálicas, el robot se activa por cinco a diez minutos y se apaga automáticamente hasta esperar la alarma otra vez según disposición de larvas. Conclusión el uso del robot acuático en contenedores de agua no se encuentra índices larvarios, así como pupas, que puede ser utilizado como control antilarvario para el combate transmisor de Dengue, Zika, Chikungunya entre otros.
Design and build an aquatic robot to destroy the presence of larvae or pupae of mosquitoes in water containers. It was built and a robot with recyclables built with tubes pipe PVC, magnifier, light sensors and barrier, engine power 110 v, resistors, LCR, charger 9 vy spotlights led, to destroy mosquito larvae was designed in a container of water. As a result there is a zero prevalence Larval rate because the robot detects larval presence sensors and lasers automatically activated with the suction effect and larvae destruction their killing the inner cast off using filters of 10 microns and metal blades, the robot is activated by five to ten minutes to wait automatically turns off the alarm again available as larvae. Conclusion use water in water containers robot is not larval indices and pupae, which can be used as anti larval control for transmitter combat Dengue, Zika, Chikungunya among others.

Where Are We After Five Editions?: Robot Vision Challenge, a Competition that Evaluates Solutions for the Visual Place Classification Problem

This article describes the Robot Vision challenge, a competition that evaluates solutions for the visual place classification problem. Since its origin, this challenge has been proposed as a common benchmark where worldwide proposals are measured using a common overall score. Each new edition of the competition introduced novelties, both for the type of input data and subobjectives of the challenge. All the techniques used by the participants have been gathered up and published to make it accessible for future developments. The legacy of the Robot Vision challenge includes data sets, benchmarking techniques, and a wide experience in the place classification research that is reflected in this article.

ViDRILO: The Visual and Depth Robot Indoor Localization with Objects information dataset

In this article we describe a semantic localization dataset for indoor environments named ViDRILO. The dataset provides five sequences of frames acquired with a mobile robot in two similar office buildings under different lighting conditions. Each frame consists of a point cloud representation of the scene and a perspective image. The frames in the dataset are annotated with the semantic category of the scene, but also with the presence or absence of a list of predefined objects appearing in the scene. In addition to the frames and annotations, the dataset is distributed with a set of tools for its use in both place classification and object recognition tasks. The large number of labeled frames in conjunction with the annotation scheme make this dataset different from existing ones. The ViDRILO dataset is released for use as a benchmark for different problems such as multimodal place classification and object recognition, 3D reconstruction or point cloud data compression.

obtención de barridos láser 3D nivelados conn el robot móvil Andábata en movimiento

Este artículo describe la adquisición de barridos tridimensionales (3D) nivelados en el robot móvil Andábata sin necesidad de detener su movimiento. Para ello, la computadora de Andábata debe integrar cada uno de los rangos láser, adquiridos con unos determinados ángulos de cabeceo y guiñada, con la información odométrica y las medidas de inclinación del vehículo para producir coordenadas Cartesianas niveladas referenciadas al inicio de cada barrido. Todo ello se ha realizado bajo el sistema operativo de robots ROS con la ayuda de paquetes estándard. El correcto funcionamiento de este esquema local de Localización y Modelado Simultáneos (SLAM) se ha comprobado experimentalmente sobre terreno inclinado.

Distributed Large-scale Mixed-Integer Optimization with Application to Energy and Multi-robot Networks

Several decision and control tasks in cyber-physical networks can be formulated as large- scale optimization problems with coupling constraints. In these "constraint-coupled" problems, each agent is associated to a local decision variable, subject to individual constraints. This thesis explores the use of primal decomposition techniques to develop tailored distributed algorithms for this challenging set-up over graphs. We first develop a distributed scheme for convex problems over random time-varying graphs with non-uniform edge probabilities. The approach is then extended to unknown cost functions estimated online. Subsequently, we consider Mixed-Integer Linear Programs (MILPs), which are of great interest in smart grid control and cooperative robotics. We propose a distributed methodological framework to compute a feasible solution to the original MILP, with guaranteed suboptimality bounds, and extend it to general nonconvex problems. Monte Carlo simulations highlight that the approach represents a substantial breakthrough with respect to the state of the art, thus representing a valuable solution for new toolboxes addressing large-scale MILPs. We then propose a distributed Benders decomposition algorithm for asynchronous unreliable networks. The framework has been then used as starting point to develop distributed methodologies for a microgrid optimal control scenario. We develop an ad-hoc distributed strategy for a stochastic set-up with renewable energy sources, and show a case study with samples generated using Generative Adversarial Networks (GANs). We then introduce a software toolbox named ChoiRbot, based on the novel Robot Operating System 2, and show how it facilitates simulations and experiments in distributed multi-robot scenarios. Finally, we consider a Pickup-and-Delivery Vehicle Routing Problem for which we design a distributed method inspired to the approach of general MILPs, and show the efficacy through simulations and experiments in ChoiRbot with ground and aerial robots.

Optimal pose selection for the calibration of an overconstrained Cable-Driven Parallel Robot

In this project an optimal pose selection method for the calibration of an overconstrained Cable-Driven Parallel robot is presented. This manipulator belongs to a subcategory of parallel robots, where the classic rigid "legs" are replaced by cables. Cables are flexible elements that bring advantages and disadvantages to the robot modeling. For this reason, there are many open research issues, and the calibration of geometric parameters is one of them. The identification of the geometry of a robot, in particular, is usually called Kinematic Calibration. Many methods have been proposed in the past years for the solution of the latter problem. Although these methods are based on calibration using different kinematic models, when the robot’s geometry becomes more complex, their robustness and reliability decrease. This fact makes the selection of the calibration poses more complicated. The position and the orientation of the endeffector in the workspace become important in terms of selection. Thus, in general, it is necessary to evaluate the robustness of the chosen calibration method, by means, for example, of a parameter such as the observability index. In fact, it is known from the theory, that the maximization of the above mentioned index identifies the best choice of calibration poses, and consequently, using this pose set may improve the calibration process. The objective of this thesis is to analyze optimization algorithms which aim to calculate an optimal choice of poses both in quantitative and qualitative terms. Quantitatively, because it is of fundamental importance to understand how many poses are needed. Not necessarily a greater number of poses leads to a better result. Qualitatively, because it is useful to understand if the selected combination of poses actually gives additional information in the process of the identification of the parameters.

Studio di fattibilità di un robot a cavi per la movimentazione in ambito navale

L’obbiettivo di questo elaborato di tesi è quello di eseguire uno studio di fattibilità per l’applicazione della tecnologia dei robot a cavi in ambito navale e della Difesa. Il lavoro è stato svolto presso l’azienda Calzoni di Calderara di Reno. In particolare, si è analizzata la possibilità di sostituire le tradizionali strutture rigide impiegate nella movimentazione di carichi con un sistema robotico azionato da cavi che fosse in grado di garantire caratteristiche quali modularità e una più facile riconfigurabilità. Sono state prese in considerazione diverse architetture di robot a cavi. Innanzitutto, si è verificato per ognuna il rispetto delle specifiche di progetto assegnate dall’azienda. Si è quindi condotta un’analisi cineto-statica sulle architetture potenzialmente idonee in modo tale da determinare quale fosse quella più prestazionale. Definita la migliore configurazione, se ne è sviluppato un primo concept preliminare.

Vision-Based Solutions for Human-Robot Collaboration in Industrial Workcells

Industrial robots are both versatile and high performant, enabling the flexible automation typical of the modern Smart Factories. For safety reasons, however, they must be relegated inside closed fences and/or virtual safety barriers, to keep them strictly separated from human operators. This can be a limitation in some scenarios in which it is useful to combine the human cognitive skill with the accuracy and repeatability of a robot, or simply to allow a safe coexistence in a shared workspace. Collaborative robots (cobots), on the other hand, are intrinsically limited in speed and power in order to share workspace and tasks with human operators, and feature the very intuitive hand guiding programming method. Cobots, however, cannot compete with industrial robots in terms of performance, and are thus useful only in a limited niche, where they can actually bring an improvement in productivity and/or in the quality of the work thanks to their synergy with human operators. The limitations of both the pure industrial and the collaborative paradigms can be overcome by combining industrial robots with artificial vision. In particular, vision can be exploited for a real-time adjustment of the pre-programmed task-based robot trajectory, by means of the visual tracking of dynamic obstacles (e.g. human operators). This strategy allows the robot to modify its motion only when necessary, thus maintain a high level of productivity but at the same time increasing its versatility. Other than that, vision offers the possibility of more intuitive programming paradigms for the industrial robots as well, such as the programming by demonstration paradigm. These possibilities offered by artificial vision enable, as a matter of fact, an efficacious and promising way of achieving human-robot collaboration, which has the advantage of overcoming the limitations of both the previous paradigms yet keeping their strengths.