864 resultados para Representation of polynomials
Resumo:
THESIS ABSTRACT Nucleation and growth of metamorphic minerals are the consequence of changing P-T-X-conditions. The thesis presented here focuses on processes governing nucleation and growth of minerals in contact metamorphic environments using a combination of geochemical analytics (chemical-, isotope-, and trace element composition), statistical treatments of spatial data, and numerical models. It is shown, that a combination of textural modeling and stable isotope analysis allows a distinction between several possible reaction paths for olivine growth in a siliceous dolomite contact aureole. It is suggested that olivine forms directly from dolomite and quartz. The formation of olivine from this metastable reaction implies metamorphic crystallization far from equilibrium. As a major consequence, the spatial distribution of metamorphic mineral assemblages in a contact aureole cannot be interpreted as a proxy for the temporal evolution of a single rock specimen, because each rock undergoes a different reaction path, depending on temperature, heating rate, and fluid-infiltration rate. A detailed calcite-dolomite thermometry study was initiated on multiple scales ranging from aureole scale to the size of individual crystals. Quantitative forward models were developed to evaluate the effect of growth zoning, volume diffusion and the formation of submicroscopic exsolution lamellae (<1 µm) on the measured Mg-distribution in individual calcite crystals and compare the modeling results to field data. This study concludes that Mg-distributions in calcite grains of the Ubehebe Peak contact aureole are the consequence of rapid crystal growth in combination with diffusion and exsolution. The crystallization history of a rock is recorded in the chemical composition, the size and the distribution of its minerals. Near the Cima Uzza summit, located in the southern Adamello massif (Italy), contact metamorphic brucite bearing dolomite marbles are exposed as xenoliths surrounded by mafic intrusive rocks. Brucite is formed retrograde pseudomorphing spherical periclase crystals. Crystal size distributions (CSD's) of brucite pseudomorphs are presented for two profiles and combined with geochemistry data and petrological information. Textural analyses are combined with geochemistry data in a qualitative model that describes the formation periclase. As a major outcome, this expands the potential use of CSD's to systems of mineral formation driven by fluid-infiltration. RESUME DE LA THESE La nucléation et la croissance des minéraux métamorphiques sont la conséquence de changements des conditions de pression, température et composition chimique du système (PT-X). Cette thèse s'intéresse aux processus gouvernant la nucléation et la croissance des minéraux au cours d'un épisode de métamorphisme de contact, en utilisant la géochimie analytique (composition chimique, isotopique et en éléments traces), le traitement statistique des données spatiales et la modélisation numérique. Il est montré que la combinaison d'un modèle textural avec des analyses en isotopes stables permet de distinguer plusieurs chemins de réactions possibles conduisant à la croissance de l'olivine dans une auréole de contact riche en Silice et dolomite. Il est suggéré que l'olivine se forme directement à partir de la dolomie et du quartz. Cette réaction métastable de formation de l'olivine implique une cristallisation métamorphique loin de l'équilibre. La principale conséquence est que la distribution spatiale des assemblages de minéraux métamorphiques dans une auréole de contact ne peut pas être considérée comme un témoin de l'évolution temporelle d'un type de roche donné, puisque chaque type de roche suit différents chemins de réactions, en fonction de la température, la vitesse de réchauffement et le taux d'infiltration du fluide. Une étude thermométrique calcite-dolomite détaillée a été réalisée à diverses échelles, depuis l'échelle de l'auréole de contact jusqu'à l'échelle du cristal. Des modèles numériques quantitatifs ont été développés pour évaluer l'effet des zonations de croissance, de la diffusion volumique et de la formation de lamelles d'exsolution submicroscopiques (<1µm) sur la distribution du magnésium mesuré dans des cristaux de calcite individuels. Les résultats de ce modèle ont été comparés ä des échantillons naturels. Cette étude montre que la distribution du Mg dans les grains de calcite de l'auréole de contact de l'Ubehebe Peak (USA) résulte d'une croissance cristalline rapide, associée aux processus de diffusion et d'exsolution. L'histoire de cristallisation d'une roche est enregistrée dans la composition chimique, la taille et la distribution de ses minéraux. Près du sommet Cima Uzza situé au sud du massif d'Adamello (Italie), des marbres dolomitiques à brucite du métamorphisme de contact forment des xénolithes dans une intrusion mafique. La brucite constitue des pseudomorphes rétrogrades du périclase. Les distributions de taille des cristaux (CSD) des pseudomorphes de brucite sont présentées pour deux profiles et sont combinées aux données géochimiques et pétrologiques. Les analyses textorales sont combinées aux données géochimiques dans un modèle qualitatif qui décrit la formation du périclase. Ceci élargit l'utilisation potentielle de la C5D aux systèmes de formation de minéraux controlés par les infiltrations fluides. THESIS ABSTRACT (GENERAL PUBLIC) Rock textures are essentially the result of a complex interaction of nucleation, growth and deformation as a function of changing physical conditions such as pressure and temperature. Igneous and metamorphic textures are especially attractive to study the different mechanisms of texture formation since most of the parameters like pressure-temperature-paths are quite well known for a variety of geological settings. The fact that textures are supposed to record the crystallization history of a rock traditionally allowed them to be used for geothermobarometry or dating. During the last decades the focus of metamorphic petrology changed from a static point of view, i.e. the representation of a texture as one single point in the petrogenetic grid towards a more dynamic view, where multiple metamorphic processes govern the texture formation, including non-equilibrium processes. This thesis tries to advance our understanding on the processes governing nucleation and growth of minerals in contact metamorphic environments and their dynamic interplay by using a combination of geochemical analyses (chemical-, isotope-, and trace element composition), statistical treatments of spatial data and numerical models. In a first part the thesis describes the formation of metamorphic olivine porphyroblast in the Ubehebe Peak contact aureole (USA). It is shown that not the commonly assumed succession of equilibrium reactions along a T-t-path formed the textures present in the rocks today, but rather the presence of a meta-stable reaction is responsible for forming the olivine porphyroblast. Consequently, the spatial distribution of metamorphic minerals within a contact aureole can no longer be regarded as a proxy for the temporal evolution of a single rock sample. Metamorphic peak temperatures for samples of the Ubehebe Peak contact aureole were determined using calcite-dolomite. This geothermometer is based on the temperature-dependent exchange of Mg between calcite and dolomite. The purpose of the second part of this thesis was to explain the interfering systematic scatter of measured Mg-content on different scales and thus to clarify the interpretation of metamorphic temperatures recorded in carbonates. Numerical quantitative forward models are used to evaluate the effect of several processes on the distribution of magnesium in individual calcite crystals and the modeling results were then compared to measured field. Information about the crystallization history is not only recorded in the chemical composition of grains, like isotope composition or mineral zoning. Crystal size distributions (CSD's) provide essential information about the complex interaction of nucleation and growth of minerals. CSD's of brucite pseudomorphs formed retrograde after periclase of the southern Adamello massif (Italy) are presented. A combination of the textural 3D-information with geochemistry data is then used to evaluate reaction kinetics and to constrain the actual reaction mechanism for the formation of periclase. The reaction is shown to be the consequence of the infiltration of a limited amount of a fluid phase at high temperatures. The composition of this fluid phase is in large disequilibrium with the rest of the rock resulting in very fast reaction rates. RESUME DE LA THESE POUR LE GRAND PUBLIC: La texture d'une roche résulte de l'interaction complexe entre les processus de nucléation, croissance et déformation, en fonction des variations de conditions physiques telles que la pression et la température. Les textures ignées et métamorphiques présentent un intérêt particulier pour l'étude des différents mécanismes à l'origine de ces textures, puisque la plupart des paramètres comme les chemin pression-température sont relativement bien contraints dans la plupart des environnements géologiques. Le fait que les textures soient supposées enregistrer l'histoire de cristallisation des roches permet leur utilisation pour la datation et la géothermobarométrie. Durant les dernières décennies, la recherche en pétrologie métamorphique a évolué depuis une visualisation statique, c'est-à-dire qu'une texture donnée correspondait à un point unique de la grille pétrogénétique, jusqu'à une visualisation plus dynamique, où les multiples processus métamorphiques qui gouvernent 1a formation d'une texture incluent des processus hors équilibre. Cette thèse a pour but d'améliorer les connaissances actuelles sur les processus gouvernant la nucléation et la croissance des minéraux lors d'épisodes de métamorphisme de contact et l'interaction dynamique existant entre nucléation et croissance. Pour cela, les analyses géochimiques (compositions chimiques en éléments majeurs et traces et composition isotopique), le traitement statistique des données spatiales et la modélisation numérique ont été combinés. Dans la première partie, cette thèse décrit la formation de porphyroblastes d'olivine métamorphique dans l'auréole de contact de l'Ubehebe Peak (USA). Il est montré que la succession généralement admise des réactions d'équilibre le long d'un chemin T-t ne peut pas expliquer les textures présentes dans les roches aujourd'hui. Cette thèse montre qu'il s'agirait plutôt d'une réaction métastable qui soit responsable de la formation des porphyroblastes d'olivine. En conséquence, la distribution spatiale des minéraux métamorphiques dans l'auréole de contact ne peut plus être interprétée comme le témoin de l'évolution temporelle d'un échantillon unique de roche. Les pics de température des échantillons de l'auréole de contact de l'Ubehebe Peak ont été déterminés grâce au géothermomètre calcite-dolomite. Celui-ci est basé sur l'échange du magnésium entre la calcite et la dolomite, qui est fonction de la température. Le but de la deuxième partie de cette thèse est d'expliquer la dispersion systématique de la composition en magnésium à différentes échelles, et ainsi d'améliorer l'interprétation des températures du métamorphisme enregistrées dans les carbonates. Des modèles numériques quantitatifs ont permis d'évaluer le rôle de différents processus sur la distribution du magnésium dans des cristaux de calcite individuels. Les résultats des modèles ont été comparés aux échantillons naturels. La composition chimique des grains, comme la composition isotopique ou la zonation minérale, n'est pas le seul témoin de l'histoire de la cristallisation. La distribution de la taille des cristaux (CSD) fournit des informations essentielles sur les interactions entre nucléation et croissance des minéraux. La CSD des pseudomorphes de brucite retrograde formés après le périclase dans le sud du massif Adamello (Italie) est présentée dans la troisième partie. La combinaison entre les données textorales en trois dimensions et les données géochimiques a permis d'évaluer les cinétiques de réaction et de contraindre les mécanismes conduisant à la formation du périclase. Cette réaction est présentée comme étant la conséquence de l'infiltration d'une quantité limitée d'une phase fluide à haute température. La composition de cette phase fluide est en grand déséquilibre avec le reste de la roche, ce qui permet des cinétiques de réactions très rapides.
Resumo:
Business organisations are excellent representations of what in physics and mathematics are designated "chaotic" systems. Because a culture of innovation will be vital for organisational survival in the 21st century, the present paper proposes that viewing organisations in terms of "complexity theory" may assist leaders in fine-tuning managerial philosophies that provide orderly management emphasizing stability within a culture of organised chaos, for it is on the "boundary of chaos" that the greatest creativity occurs. It is argued that 21st century companies, as chaotic social systems, will no longer be effectively managed by rigid objectives (MBO) nor by instructions (MBI). Their capacity for self-organisation will be derived essentially from how their members accept a shared set of values or principles for action (MBV). Complexity theory deals with systems that show complex structures in time or space, often hiding simple deterministic rules. This theory holds that once these rules are found, it is possible to make effective predictions and even to control the apparent complexity. The state of chaos that self-organises, thanks to the appearance of the "strange attractor", is the ideal basis for creativity and innovation in the company. In this self-organised state of chaos, members are not confined to narrow roles, and gradually develop their capacity for differentiation and relationships, growing continuously toward their maximum potential contribution to the efficiency of the organisation. In this way, values act as organisers or "attractors" of disorder, which in the theory of chaos are equations represented by unusually regular geometric configurations that predict the long-term behaviour of complex systems. In business organisations (as in all kinds of social systems) the starting principles end up as the final principles in the long term. An attractor is a model representation of the behavioral results of a system. The attractor is not a force of attraction or a goal-oriented presence in the system; it simply depicts where the system is headed based on its rules of motion. Thus, in a culture that cultivates or shares values of autonomy, responsibility, independence, innovation, creativity, and proaction, the risk of short-term chaos is mitigated by an overall long-term sense of direction. A more suitable approach to manage the internal and external complexities that organisations are currently confronting is to alter their dominant culture under the principles of MBV.
Resumo:
Les inégalités économiques se traduisent-elles dans des inégalités politiques à travers le processus de représentation électorale? Telle est la question centrale de cette thèse qui s'attache, par ailleurs, à investiguer les mécanismes qui tendent à produire une représentation biaisée des préférences politiques des citoyens en fonction de leur statut économique. Focalisé sur le cas de la Suisse et faisant usage des données de l'enquête postélectorale Selects de 2007, ce travail démontre que sur les rares sujets qui divisent les citoyens selon des clivages économiques - la redistribution des richesses et la sécurité sociale en particulier - les élus à l'Assemblée fédérale ont des préférences qui reflètent mieux les opinions des citoyens les plus riches. Cette sous-représentation des opinions des citoyens modestes et de ceux faisant partie du centre de la distribution des revenus peut en partie être attribuée à des différences dans les taux de participation et de connaissance politiques entre ces groupes de citoyens. La thèse met également en évidence le rôle joué par la représentation descriptive - autrement dit, la similitude en termes de statut économique entre les représentants et les représentés - dans la représentation des opinions et intérêts des citoyens. Par ailleurs, la structure du système partisan en Suisse ne reflétant pas la multidimensionnalité des préférences politiques des citoyens, les électeurs ne parviennent pas à traduire la complexité de leurs préférences politiques dans un choix de vote, ce qui, dans la configuration actuelle des forces politiques, tend à favoriser l'élection de représentants aux opinions proches de la droite sur les questions économiques. Enfin, une analyse de la représentation politique au niveau cantonal tend à soutenir la thèse selon laquelle le manque de régulation en matière de financement des partis en Suisse pourrait partiellement expliquer les inégalités dans la représentation des opinions politiques des citoyens aux revenus distincts. - Do economic inequalities translate into political inequalities through electoral representation? This is the central research question of this thesis, which also investigates the mechanisms that lead to potential economically based inequalities in the representation of citizens' policy preferences. Focusing on the case of Switzerland and making use of data provided by the post- electoral survey Selects 2007, this research demonstrates that regarding the rare policy domains in which the preferences of citizens are clearly linked to economic cleavages - redistribution and social security in particular - members of the Federal Assembly have policy preferences that best reflect the policy preferences of richer citizens. The under-representation of the opinions of relatively poor citizens and of those being the in the middle of the income distribution can be to some extent be explained by differences in political participation and political information across income groups. The thesis also puts forward the role played by descriptive representation - the similarity between representatives and represented in terms of their socioeconomic status - for the representation of citizens' preferences and interests. In addition, the structure of the party system in Switzerland does not reflect the multidimensionality of policy preferences among citizens who, as a result, have a hard time translating their complex preferences into a vote choice. Given the configuration of political actors, this tends to favour the election of representatives from the right who do not represent the preferences of their voters on economic issues. Finally, an analysis of representation at the cantonal level tends to confirm that the lack of party finance regulations in Switzerland may partially explain inequalities in the representation of citizens with different levels of income.
Resumo:
Portugal’s historical past strongly influences the composition of the country’s immigrant population. The main third-country foreign nationals in Portugal originate traditionally from Portuguese-speaking African countries (namely Cape Verde, Angola, Guinea Bissau, and S. Tomé e Príncipe) and Brazil. In 2001, a newly created immigrant status entitled “permanence” authorization uncovered a quantitative and a qualitative change in the structure of immigrant population in Portugal. First, there was a quantitative jump from 223.602 foreigners in 2001 to 364.203 regularized foreigners in 2003. Secondly, there was a substantial qualitative shift in the composition of immigrants. The majority of the new immigrants began coming from Eastern European countries, such as Ukraine, Moldavia, Romania, and the Russian Federation. Thus, European countries outside the E.U. zone now rank second (after African countries) in their contribution of individuals to the stocks of immigrant population in Portugal. The differences between the new and traditional immigration flows are visible in the geographical distribution of immigrants and in their insertion into the labour market. While the traditional flows would congregate around the metropolitan area of Lisbon and in the Algarve, the new migratory flows tend to be more geographically dispersed and present in less urbanized areas of Portugal. In terms of insertion in the labour market, although the construction sector is still the most important industry for immigrant labour, Eastern European workers may also be found in the agriculture and manufacturing sectors. The institutional conditions that encourage immigrants’ civic participation are divided at three different levels: the state, the local, and the civil society levels. At the state level, the High Commissioner for Migrations and Ethnic Minorities is the main organizational structure along with a set of interrelated initiatives operating under specific regulatory frameworks, which act as mediators between state officials and the Portuguese civil society, and more specifically, immigrant communities. At the local level, some municipalities created consultative councils and municipal departments aiming at encouraging the participation and representation of interests from immigrant groups and association in local policies. In the civil society sphere, the main actors in Portugal spurring immigrants civic participation are immigrant associations, mainstream associations directed toward immigration topics, and unions. The legal conditions framing immigrants’ access to social housing, education, health, and social security in Portugal are also considered to be positive. Conditions restricting immigrants’ civic participation are mainly normative and include the Portuguese nationality law, the regulations shaping the political participation of immigrants, namely in what concerns their right to vote, and employment regulations restricting immigrants’ access to public administration positions. Part II of the report focuses on the active civic participation of third country immigrants. First, reasons for the lack of research on this issue in Portugal are explained. On the one hand, the recent immigration history and the more urgent needs regarding school and economic integration kept this issue out of the research spotlight. On the other hand, it was just in the beginning of the 1990s that immigrants took the very first steps toward collective mobilisation. Secondly, the literature review of Portuguese bibliography covers research on third country immigrants’ associative movement, research on local authorities’ policies and discussion about ethnic politics and political mobilisation of immigrants in Portugal. As political mobilisation of these groups has been made mainly through ethnic and/or migrant organisations, a brief history of immigrants' associative movement is given. Immigrant associations develop multiple roles, covering the social, the cultural, the economic and the political domains. Political claiming for the regularisation of illegal immigrants has been a permanent and important field of intervention since the mid-1990s. Research results reveal the com5 plex relations between ethnic mobilisation and the set of legal and institutional frameworks developed by local and national governmental authorities targeted to the incorporation of minority groups. Case studies on the Oeiras district and on the Amadora district are then presented. Conclusions underline that the most active immigrant groups are those from Cape Verde and Guinea Bissau, since these groups have constituted a higher number of ethnic associations, give priority to political claiming and present a more politicised discourse. Reflecting on the future of research on civic participation of third country immigrants in Portugal, the authors state that it would be interesting and relevant to compare the Portuguese situation with those of other European countries, with an older immigration history, and analyse how the Portuguese immigrants’ associative movement will be affected by a changing legal framework and the emergence of new opportunities within the set of structures regarding the political participation of minority groups.
Resumo:
This paper aims to estimate a translog stochastic frontier production function in the analysis of a panel of 150 mixed Catalan farms in the period 1989-1993, in order to attempt to measure and explain variation in technical inefficiency scores with a one-stage approach. The model uses gross value added as the output aggregate measure. Total employment, fixed capital, current assets, specific costs and overhead costs are introduced into the model as inputs. Stochasticfrontier estimates are compared with those obtained using a linear programming method using a two-stage approach. The specification of the translog stochastic frontier model appears as an appropriate representation of the data, technical change was rejected and the technical inefficiency effects were statistically significant. The mean technical efficiency in the period analyzed was estimated to be 64.0%. Farm inefficiency levels were found significantly at 5%level and positively correlated with the number of economic size units.
Resumo:
Game theory is a branch of applied mathematics used to analyze situation where two or more agents are interacting. Originally it was developed as a model for conflicts and collaborations between rational and intelligent individuals. Now it finds applications in social sciences, eco- nomics, biology (particularly evolutionary biology and ecology), engineering, political science, international relations, computer science, and philosophy. Networks are an abstract representation of interactions, dependencies or relationships. Net- works are extensively used in all the fields mentioned above and in many more. Many useful informations about a system can be discovered by analyzing the current state of a network representation of such system. In this work we will apply some of the methods of game theory to populations of agents that are interconnected. A population is in fact represented by a network of players where one can only interact with another if there is a connection between them. In the first part of this work we will show that the structure of the underlying network has a strong influence on the strategies that the players will decide to adopt to maximize their utility. We will then introduce a supplementary degree of freedom by allowing the structure of the population to be modified along the simulations. This modification allows the players to modify the structure of their environment to optimize the utility that they can obtain.
Characterization of intonation in Karṇāṭaka music by parametrizing context-based Svara Distributions
Resumo:
Intonation is a fundamental music concept that has a special relevance in Indian art music. It is characteristic of the rāga and intrinsic to the musical expression of the performer. Describing intonation is of importance to several information retrieval tasks like the development of rāga and artist similarity measures. In our previous work, we proposed a compact representation of intonation based on the parametrization of the pitch histogram of a performance and demonstrated the usefulness of this representation through an explorative rāga recognition task in which we classified 42 vocal performances belonging to 3 rāgas using parameters of a single svara. In this paper, we extend this representation to employ context-based svara distributions, which are obtained with a different approach to find the pitches belonging to each svara. We quantitatively compare this method to our previous one, discuss the advantages, and the necessary melodic analysis to be carried out in future.
Resumo:
The concept of authority crosses many social sciences, but there is a lack of common taxonomy and definitions on this topic. The aims of this review are: (1) to define the basic characteristics of the authority relationship, reaching a definition suitable for the different domains of social psychology and social sciences; (2) to bridge the gap between individual and societal levels of explanation concerning the authority relationship, by proposing an interpretation within the framework of social representations. The authority relationship can be conceived as a negotiation of meanings and it is closely linked to shared value orientation and the attribution of meanings negotiated within a society. We assume that the authority relationship is socially constructed and represents both a shared representation of society and a normative principle of social life. A multidisciplinary approach is adopted, crossing definitions and studies provided in sociology, political science, law and social psychology.
Resumo:
This paper analyses the predictive ability of quantitative precipitation forecasts (QPF) and the so-called "poor-man" rainfall probabilistic forecasts (RPF). With this aim, the full set of warnings issued by the Meteorological Service of Catalonia (SMC) for potentially-dangerous events due to severe precipitation has been analysed for the year 2008. For each of the 37 warnings, the QPFs obtained from the limited-area model MM5 have been verified against hourly precipitation data provided by the rain gauge network covering Catalonia (NE of Spain), managed by SMC. For a group of five selected case studies, a QPF comparison has been undertaken between the MM5 and COSMO-I7 limited-area models. Although MM5's predictive ability has been examined for these five cases by making use of satellite data, this paper only shows in detail the heavy precipitation event on the 9¿10 May 2008. Finally, the "poor-man" rainfall probabilistic forecasts (RPF) issued by SMC at regional scale have also been tested against hourly precipitation observations. Verification results show that for long events (>24 h) MM5 tends to overestimate total precipitation, whereas for short events (¿24 h) the model tends instead to underestimate precipitation. The analysis of the five case studies concludes that most of MM5's QPF errors are mainly triggered by very poor representation of some of its cloud microphysical species, particularly the cloud liquid water and, to a lesser degree, the water vapor. The models' performance comparison demonstrates that MM5 and COSMO-I7 are on the same level of QPF skill, at least for the intense-rainfall events dealt with in the five case studies, whilst the warnings based on RPF issued by SMC have proven fairly correct when tested against hourly observed precipitation for 6-h intervals and at a small region scale. Throughout this study, we have only dealt with (SMC-issued) warning episodes in order to analyse deterministic (MM5 and COSMO-I7) and probabilistic (SMC) rainfall forecasts; therefore we have not taken into account those episodes that might (or might not) have been missed by the official SMC warnings. Therefore, whenever we talk about "misses", it is always in relation to the deterministic LAMs' QPFs.
Resumo:
Freud defined the drive as "a concept on the frontier between the mental and the somatic". Today this view that was based on clinical observations interpreted within the psychoanalytical framework, can be revisited in light of the current neuroscientific notions of neuronal plasticity and somatic states. Indeed, through the mechanisms of plasticity experience leaves a trace that forms the neural basis of a representation of the experience. Such a representation R is associated with a somatic state S in the sense taken from the "somatic marker" model of Damasio. Thus, the internal reality of the subject, particularly the unconscious one, is constituted by such connected R's and S's. In the model that we discuss, the posterior insula represents the primary interoceptive cortex where information about somatic states S converges, while in the anterior insula the connection between R and S can take place and establish a neurobiological correlate for the notion of drive. We posit that the re-representations of S associated with R in the anterior insula may correspond to the Vorstellungsrepräsentanz postulated by Freud. We further propose that the tension between R and S established in the anterior insula is discharged according to the notion of drive through the motor arm of the limbic system, namely the anterior cingulate cortex which is heavily connected with the anterior insula.
Resumo:
Fluvial deposits are a challenge for modelling flow in sub-surface reservoirs. Connectivity and continuity of permeable bodies have a major impact on fluid flow in porous media. Contemporary object-based and multipoint statistics methods face a problem of robust representation of connected structures. An alternative approach to model petrophysical properties is based on machine learning algorithm ? Support Vector Regression (SVR). Semi-supervised SVR is able to establish spatial connectivity taking into account the prior knowledge on natural similarities. SVR as a learning algorithm is robust to noise and captures dependencies from all available data. Semi-supervised SVR applied to a synthetic fluvial reservoir demonstrated robust results, which are well matched to the flow performance
Resumo:
BACKGROUND: Qualitative frameworks, especially those based on the logical discrete formalism, are increasingly used to model regulatory and signalling networks. A major advantage of these frameworks is that they do not require precise quantitative data, and that they are well-suited for studies of large networks. While numerous groups have developed specific computational tools that provide original methods to analyse qualitative models, a standard format to exchange qualitative models has been missing. RESULTS: We present the Systems Biology Markup Language (SBML) Qualitative Models Package ("qual"), an extension of the SBML Level 3 standard designed for computer representation of qualitative models of biological networks. We demonstrate the interoperability of models via SBML qual through the analysis of a specific signalling network by three independent software tools. Furthermore, the collective effort to define the SBML qual format paved the way for the development of LogicalModel, an open-source model library, which will facilitate the adoption of the format as well as the collaborative development of algorithms to analyse qualitative models. CONCLUSIONS: SBML qual allows the exchange of qualitative models among a number of complementary software tools. SBML qual has the potential to promote collaborative work on the development of novel computational approaches, as well as on the specification and the analysis of comprehensive qualitative models of regulatory and signalling networks.
Resumo:
The integral representation of the electromagnetic two-form, defined on Minkowski space-time, is studied from a new point of view. The aim of the paper is to obtain an invariant criteria in order to define the radiative field. This criteria generalizes the well-known structureless charge case. We begin with the curvature two-form, because its field equations incorporate the motion of the sources. The gauge theory methods (connection one-forms) are not suited because their field equations do not incorporate the motion of the sources. We obtain an integral solution of the Maxwell equations in the case of a flow of charges in irrotational motion. This solution induces us to propose a new method of solving the problem of the nature of the retarded radiative field. This method is based on a projection tensor operator which, being local, is suited to being implemented on general relativity. We propose the field equations for the pair {electromagnetic field, projection tensor J. These field equations are an algebraic differential first-order system of oneforms, which verifies automatically the integrability conditions.
Variability of soil fertility properties in areas planted to sugarcane in the State of Goias, Brazil
Resumo:
Soil sampling should provide an accurate representation of a given area so that recommendations for amendments of soil acidity, fertilization and soil conservation may be drafted to increase yield and improve the use of inputs. The aim of this study was to evaluate the variability of soil fertility properties of Oxisols in areas planted to sugarcane in the State of Goias, Brazil. Two areas of approximately 8,100 m² each were selected, representing two fields of the Goiasa sugarcane mill in Goiatuba. The sugarcane crop had a row spacing of 1.5 m and subsamples were taken from 49 points in the row and 49 between the row with a Dutch auger at depths of 0.0-0.2 and 0.2-0.4 m, for a total of 196 subsamples for each area. The samples were individually subjected to chemical analyses of soil fertility (pH in CaCl2, potential acidity, organic matter, P, K, Ca and Mg) and particle size analysis. The number of subsamples required to compose a sample within the acceptable ranges of error of 5, 10, 20 and 40 % of each property were computed from the coefficients of variation and the Student t-value for 95 % confidence. The soil properties under analysis exhibited different variabilities: high (P and K), medium (potential acidity, Ca and Mg) and low (pH, organic matter and clay content). Most of the properties analyzed showed an error of less than 20 % for a group of 20 subsamples, except for P and K, which were capable of showing an error greater than 40 % around the mean. The extreme variability in phosphorus, particularly at the depth of 0.2-0.4 m, attributed to banded application of high rates of P fertilizers at planting, places limitations on assessment of its availability due to the high number of subsamples required for a composite sample.
Resumo:
The graphical representation of spatial soil properties in a digital environment is complex because it requires a conversion of data collected in a discrete form onto a continuous surface. The objective of this study was to apply three-dimension techniques of interpolation and visualization on soil texture and fertility properties and establish relationships with pedogenetic factors and processes in a slope area. The GRASS Geographic Information System was used to generate three-dimensional models and ParaView software to visualize soil volumes. Samples of the A, AB, BA, and B horizons were collected in a regular 122-point grid in an area of 13 ha, in Pinhais, PR, in southern Brazil. Geoprocessing and graphic computing techniques were effective in identifying and delimiting soil volumes of distinct ranges of fertility properties confined within the soil matrix. Both three-dimensional interpolation and the visualization tool facilitated interpretation in a continuous space (volumes) of the cause-effect relationships between soil texture and fertility properties and pedological factors and processes, such as higher clay contents following the drainage lines of the area. The flattest part with more weathered soils (Oxisols) had the highest pH values and lower Al3+ concentrations. These techniques of data interpolation and visualization have great potential for use in diverse areas of soil science, such as identification of soil volumes occurring side-by-side but that exhibit different physical, chemical, and mineralogical conditions for plant root growth, and monitoring of plumes of organic and inorganic pollutants in soils and sediments, among other applications. The methodological details for interpolation and a three-dimensional view of soil data are presented here.