Secondary Aural Symptoms in Relation to Cranio-Cervical and General Disorders

The present thesis comprises two study populations. The first study sample (SS1) consisted of 411 adults examined and interviewed at three annual visits. The second study sample (SS2) consisted of 1720 adults who filled in a mailed questionnaire about secondary otalgia, tinnitus and fullness of ears. In the second phase of the SS2, 100 subjects with otalgia were examined and interviewed by specialist in stomatognathic physiology and otorhinolaryngology. In the third phase, 36 subjects participated in a randomized, controlled and blinded trial of effectiveness of occlusal appliance on secondary otalgia, facial pain, headache and treatment need of temporomandibular disorders (TMD). The standardized prevalence of recurrent secondary otalgia was 6%, tinnitus 15% and fullness of ears 8%. Aural symptoms were more frequent among young than old subjects. They were associated with other, simultaneous aural symptoms, TMD pain, head and neck region pain, and visits to a physician. The subjects with aural symptoms more often had tenderness on palpation of masticatory muscles and clinical signs of temporomandibular joint than the subjects without. 85% of the subjects reporting secondary otalgia had cervical spine or temporomandibular disorder or both. In SS1, the final model of secondary otalgia included active need treatment for TMD, elevated level of stress symptoms, and bruxism. In SS2, the final models of aural symptoms included associated aural symptoms, young age, TMD pain, headache and shoulder ache. Stabilization splint more effectively alleviated secondary otalgia and active treatment need for TMD than a palatal control splint. In patients with aural pain, tinnitus or fullness of ears, it is important to first rule out otologic and nasopharyngeal diseases that may cause the symptoms. If no explanation for aural symptoms is found, temporomandibular and cervical spine disorders should be rouled out to minimize unnecessary visits to a physician.

The relation of body mass index and abdominal adiposity with dyslipidemia in 27 general populations of the WHO MONICA Project.

The association between adiposity measures and dyslipidemia has seldom been assessed in a multipopulational setting. 27 populations from Europe, Australia, New Zealand and Canada (WHO MONICA project) using health surveys conducted between 1990 and 1997 in adults aged 35-64 years (n = 40,480). Dyslipidemia was defined as the total/HDL cholesterol ratio >6 (men) and >5 (women). Overall prevalence of dyslipidemia was 25% in men and 23% in women. Logistic regression showed that dyslipidemia was strongly associated with body mass index (BMI) in men and with waist circumference (WC) in women, after adjusting for region, age and smoking. Among normal-weight men and women (BMI<25 kg/m(2)), an increase in the odds for being dyslipidemic was observed between lowest and highest WC quartiles (OR = 3.6, p < 0.001). Among obese men (BMI ≥ 30), the corresponding increase was smaller (OR = 1.2, p = 0.036). A similar weakening was observed among women. Classification tree analysis was performed to assign subjects into classes of risk for dyslipidemia. BMI thresholds (25.4 and 29.2 kg/m(2)) in men and WC thresholds (81.7 and 92.6 cm) in women came out at first stages. High WC (>84.8 cm) in normal-weight men, menopause in women and regular smoking further defined subgroups at increased risk. standard categories of BMI and WC, or their combinations, do not lead to optimal risk stratification for dyslipidemia in middle-age adults. Sex-specific adaptations are necessary, in particular by taking into account abdominal obesity in normal-weight men, post-menopausal age in women and regular smoking in both sexes.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Un horizon infini : paysage, expérience et savoir dans les voyages au Tibet de Jacques Bacot et des explorateurs français (1850-1912)

Résumé de la thèseCette étude repose sur un double constat initial : en premier lieu, les récits français d'explorationau Tibet de la période s'étendant de 1850 à 1912 relèvent d'une tradition particulière du voyagescientifique en partie irréductible aux traditions des autres nations impérialistes de la mêmeépoque, notamment la tradition britannique à laquelle on les a souvent assimilés. En second lieu,ces récits révèlent à la fois la place centrale dégagée à la description du paysage tibétain et uneévolution unique et originale des savoirs et des représentations qui lui sont liés.Ce travail montre la rapide évolution des images du Tibet que s'est façonnées l'Europe,l'interrelation de cette histoire des représentations avec une révision des connaissances sur laterre et l'homme dans les sciences du XIXe siècle, ainsi qu'une dimension différentielle entre lesobjectifs de connaissance émanant des explorateurs français et anglais, différence due à uncontexte géopolitique hétérogène. Sur le fond de cette démarche contextualisante, le recours àl'analyse textuelle met en évidence le rôle qu'ont joué les explorateurs français dans l'histoire dessavoirs sur le Tibet.Pour des raisons inhérentes à la qualité d'écriture de ses récits et à l'acuité remarquable de sonapproche du monde tibétain, une place centrale de ce travail a été ménagée à Jacques Bacot(voyages de 1906 à 1907 - Dans les Marches tibétaines - et de 1909 à 1910 - Le Tibet révolté). Il a dèslors été fructueux de replacer ses récits dans l'histoire des savoirs et des représentations du Tibetet de les comparer aux récits majeurs d'autres explorateurs français au Tibet comme GabrielBonvalot, Fernand Grenard et Henri d'Ollone.Le paysage est une notion-clé pour comprendre le regard que portent les explorateurs sur leTibet. Or le paysage revêt des acceptions variables selon les auteurs et affiche des facettesdifférentes. Il a ainsi été possible de distinguer plusieurs dimensions : une dimension cognitive, unedimension épistémique, une dimension intersubjective et, enfin, une dimension imaginaire et sacrée. Cettedimension sacrée du paysage peut également être actualisée en tant que dimension écosymbolique.C'est là l'aboutissement des voyages de Bacot. L'explorateur, attentif à la culture tibétaine, envient à réaliser la valeur sacrée qui traverse la relation des Tibétains eux-mêmes à leurenvironnement. Le paysage ainsi compris se place au fondement d'une expérience partagée avecdes acteurs issus d'une autre culture et apparaît ainsi comme un opérateur privilégié pour« comprendre les compréhensions » (Clifford Geertz) des explorateurs, mais aussi, de proche enproche, des Tibétains.D'un point de vue épistémologique, la mise au jour de ces dimensions du paysage permetd'éviter certains écueils de la critique historienne et littéraire sur les récits de voyage au Tibet, quin'y a vu tantôt que de simples documents inertes, tantôt que le reflet d'un imaginaire purementet indéfectiblement occidental. La présente étude montre au contraire la part irréductiblequ'occupe la rencontre in situ avec l'autre et l'ailleurs dans l'élaboration conjointe desreprésentations et des savoirs.