Multi-criteria analysis and the resolution of sustainable development dilemmas: a stakeholder management approach

We demonstrate that stakeholder-oriented multi-criteria analysis (MCA) can adequately address a variety of sustainable development dilemmas in decision-making, especially when applied to complex project evaluations involving multiple objectives and multiple stakeholder groups. Such evaluations are typically geared towards satisfying simultaneously private economic goals, broader social objectives and environmental targets. We show that, under specific conditions, a variety of stakeholder-oriented MCA approaches may be able to contribute substantively to the resolution or improved governance of societal conflicts and the pursuit of the public good in the form of sustainable development. We contrast the potential usefulness of these stakeholder-oriented approaches – in terms of their ability to contribute to sustainable development – with more conventional MCA approaches and social cost–benefit analysis.

Investigation of high-efficiency Wireless Power Transfer criteria of resonantly-coupled loops and dipoles through analysis of the figure of merit

The efficiency of a Wireless Power Transfer (WPT) system is greatly dependent on both the geometry and operating frequency of the transmitting and receiving structures. By using Coupled Mode Theory (CMT), the figure of merit is calculated for resonantly-coupled loop and dipole systems. An in-depth analysis of the figure of merit is performed with respect to the key geometric parameters of the loops and dipoles, along with the resonant frequency, in order to identify the key relationships leading to high-efficiency WPT. For systems consisting of two identical single-turn loops, it is shown that the choice of both the loop radius and resonant frequency are essential in achieving high-efficiency WPT. For the dipole geometries studied, it is shown that the choice of length is largely irrelevant and that as a result of their capacitive nature, low-MHz frequency dipoles are able to produce significantly higher figures of merit than those of the loops considered. The results of the figure of merit analysis are used to propose and subsequently compare two mid-range loop and dipole WPT systems of equal size and operating frequency, where it is shown that the dipole system is able to achieve higher efficiencies than the loop system of the distance range examined.

Scoring rules and abnormally low bids criteria in construction tenders: a taxonomic review

In the global construction context, the best value or most economically advantageous tender is becoming a widespread approach for contractor selection, as an alternative to other traditional awarding criteria such as the lowest price. In these multi-attribute tenders, the owner or auctioneer solicits proposals containing both a price bid and additional technical features. Once the proposals are received, each bidder’s price bid is given an economic score according to a scoring rule, generally called an economic scoring formula (ESF) and a technical score according to pre-specified criteria. Eventually, the contract is awarded to the bidder with the highest weighted overall score (economic + technical). However, economic scoring formula selection by auctioneers is invariably and paradoxically a highly intuitive process in practice, involving few theoretical or empirical considerations, despite having been considered traditionally and mistakenly as objective, due to its mathematical nature. This paper provides a taxonomic classification of a wide variety of ESFs and abnormally low bids criteria (ALBC) gathered in several countries with different tendering approaches. Practical implications concern the optimal design of price scoring rules in construction contract tenders, as well as future analyses of the effects of the ESF and ALBC on competitive bidding behaviour.

Design (provisional chapter title)

The move of parts of OUP's publishing operation from London to Oxford in the 1970s allowed the creation of a centralised art and design department. Drawing on material in the OUP archives this chapter traces the kinds of work that this department undertook and the subsequent devolution of design activities to publishing divisions. Book design at Oxford is considered both stylistically and in response to technological changes. The relationship with the Printing House and its design standards, the search for standardisation and the need for economy, and the specialist design skills demanded by OUP's publications are recurring themes. Innovations in using overseas suppliers and in the introduction of desktop publishing technology are located in relation the the organization of the design function at OUP and its relationship to editorial policies.The chapter concludes with a consideration of the corporate identity system introduced in 1998, and its relationship to previous manifestations of 'Oxford style'.

Testicular traits as selection criteria for young Nellore bulls

The objective of this study was to evaluate the possible use of biometric testicular traits as selection criteria for young Nellore bulls using Bayesian inference to estimate heritability coefficients and genetic correlations. Multitrait analysis was performed including 17,211 records of scrotal circumference obtained during andrological assessment (SCAND) and 15,313 records of testicular volume and shape. In addition, 50,809 records of scrotal circumference at 18 mo (SC18), used as an anchor trait, were analyzed. The (co) variance components and breeding values were estimated by Gibbs sampling using the Gibbs2F90 program under an animal model that included contemporary groups as fixed effects, age of the animal as a linear covariate, and direct additive genetic effects as random effects. Heritabilities of 0.42, 0.43, 0.31, 0.20, 0.04, 0.16, 0.15, and 0.10 were obtained for SC18, SCAND, testicular volume, testicular shape, minor defects, major defects, total defects, and satisfactory andrological evaluation, respectively. The genetic correlations between SC18 and the other traits were 0.84 (SCAND), 0.75 (testicular shape), 0.44 (testicular volume), -0.23 (minor defects), -0.16 (major defects), -0.24 (total defects), and 0.56 (satisfactory andrological evaluation). Genetic correlations of 0.94 and 0.52 were obtained between SCAND and testicular volume and shape, respectively, and of 0.52 between testicular volume and testicular shape. In addition to favorable genetic parameter estimates, SC18 was found to be the most advantageous testicular trait due to its easy measurement before andrological assessment of the animals, even though the utilization of biometric testicular traits as selection criteria was also found to be possible. In conclusion, SC18 and biometric testicular traits can be adopted as a selection criterion to improve the fertility of young Nellore bulls.

Mycoplasmal lipid-associated membrane proteins and Mycoplasma arthritidis mitogen recognition by serum antibodies from patients with rheumatoid arthritis

Mycoplasmal lipid-associated membrane proteins (LAMPs) and Mycoplasma arthritidis mitogen (MAM superantigen) are potent stimulators of the immune system. The objective of this work was to detect antibodies to MAM and LAMPs of Mycoplasma hominis and M. fermentans in the sera of patients affected by rheumatoid arthritis (RA) and systemic lupus erythematosus (SLE) to identify mycoplasmal products that can be involved in the etiopathogenesis of these autoimmune diseases. Serum samples from female RA and SLE patients and controls, recombinant MAM, and LAMPs of M. hominis PG21 and M. fermentans PG18 were used in Western blot assays. A similar frequency of sera from patients and controls reactive to MAM was detected. A larger number of M. hominis and M. fermentans LAMPs were recognized by sera from RA patients than controls, but no differences were detected between sera from SLE patients and controls. Among the LAMPs recognized by IgG antibodies from RA patients, proteins of molecular masses in a range of < 49 and a parts per thousand yen20 KDa (M. hominis) and < 102 and a parts per thousand yen58 KDa (M. fermentans) were the most reactive. These preliminary results demonstrate the strong reactivity of antibodies of RA patients with some M. hominis and M. fermentans LAMPs. These LAMPs could be investigated as mycoplasmal antigens that can take part in the induction or amplification of human autoimmune responses.

Comparing finite state machine test coverage criteria

To plan testing activities, testers face the challenge of determining a strategy, including a test coverage criterion that offers an acceptable compromise between the available resources and test goals. Known theoretical properties of coverage criteria do not always help and, thus, empirical data are needed. The results of an experimental evaluation of several coverage criteria for finite state machines (FSMs) are presented, namely, state and transition coverage; initialisation fault and transition fault coverage. The first two criteria focus on FSM structure, whereas the other two on potential faults in FSM implementations. The authors elaborate a comparison approach that includes random generation of FSM, construction of an adequate test suite and test minimisation for each criterion to ensure that tests are obtained in a uniform way. The last step uses an improved greedy algorithm.

PAIN IN FIBROMYALGIA AND DISCRIMINATIVE POWER OF THE INSTRUMENTS: VISUAL ANALOG SCALE, DOLORIMETRY AND THE MCGILL PAIN QUESTIONNAIRE

Objective: The aim of this study was to verify the discriminative power of the most widely used pain assessment instruments. Methods: The sample consisted of 279 subjects divided into Fibromyalgia Group (FM- 205 patients with fibromyalgia) and Control Group (CG-74 healthy subjects), mean age 49.29 +/- 10.76 years. Only 9 subjects were male, 6 in FM and 3 in CG. FM were outpatients from the Rheumatology Clinic of the University of Sao Paulo - Hospital das Clinicas (HCFMUSP); the CG included people accompanying patients and hospital staff with similar socio-demographic characteristics. Three instruments were used to assess pain: the McGill Pain Questionnaire (MPQ), the Visual Analog Scale (VAS), and the Dolorimetry, to measure pain threshold on tender points (generating the TP index). In order to assess the discriminative power of the instruments, the measurements obtained were submitted to descriptive analysis and inferential analysis using ROC Curve - sensibility (S), specificity (S I) and area under the curve (AUC) - and Contingence tables with Chi-square Test and odds ratio. Significance level was 0.05. Results: Higher sensibility, specificity and area under the curve was obtained by VAS (80%, 80% and 0.864, respectively), followed by Dolorimetry (S 77%, S177% and AUC 0.851), McGill Sensory (S 72%, S167% and AUC 0.765) and McGill Affective (S 69%, S1 67% and AUC 0.753). Conclusions: VAS presented the higher sensibility, specificity and AUC, showing the greatest discriminative power among the instruments. However, these values are considerably similar to those of Dolorimetry.

Enhancing the distribution of Swedish tourism services on international markets : Possible export-ready criteria requisitioned by European tour operators

This paper identifies subjects which are relevant for Swedish suppliers of tourism services beforeapproaching foreign markets. Most suppliers are micro, small or medium sized companies anduse intermediaries, such as tour operators, for internationalization. The research considers theopinion of British and German tour operators, which require some criteria beforehand in orderto simplify both the initialization and the development of cooperation. Destination marketingorganizations (DMOs) are hereby the go-betweens since they not only represent small-scalesuppliers on international markets, but also initiate first encounters between suppliers and touroperators. Suppliers need to provide DMOs with accurate information in order to ensure thebest possible representation. After initializing collaboration, business relationships are sought todevelop in order to facilitate long-term cooperation. Proper preparation forms therefore the basefor strengthening the competitiveness of Swedish tourism prior approaching internationalmarkets. The enhancement of distributing Swedish tourism services on foreign markets appearedto be a profitable way to enable further growth, which is strongly limited on the domestic market.Increasing the export share therefore secures and further facilitates tourism’s valuablecontributions to the Swedish economy.

International conference site selection criteria : And a case study of Stockholm as an international conference city

The purpose of this thesis is to identify the destination site selection criteria for internationalconferences from the perspectives of the three main players of the conference industry,conference buyers (organizers and delegates) and suppliers. Additionally, the researchidentifies the strengths and weaknesses of the congress cities of Stockholm and Vienna.Through a comparison with Vienna, the top city for hosting international conferences, a roadmap for Stockholm has been designed, to strengthen its congress tourism opportunities, thus,obtaining a higher status as an international congress city. This qualitative research hascombined both primary and secondary data methods, through semi-standardized expertinterviews and secondary studies respectively, to fulfil the study’s aim. The data have beenanalysed by applying the techniques of qualitative content analysis; the secondary dataadopting an inductive approach according to Mayring (2003) while the expert interviewsusing a deductive approach according to Meuser & Nagel (2009). The conclusions of thesecondary data have been further compared and contrasted with the outcomes of the primarydata, to propose fresh discoveries, clarifications, and concepts related to the site selectioncriteria for international conferences, and for the congress tourism industry of Stockholm. Theresearch discusses the discoveries of the site selection criteria, the implications of thestrengths and weaknesses of Stockholm in comparison to Vienna, recommendations forStockholm via a road map, and future research areas in detail. The findings andrecommendation, not only provide specific steps and inceptions that Stockholm as aninternational conference city can apply, but also propose findings, which can aid conferencebuyers and suppliers to cooperate, to strengthen their marketing strategies and developsuccessful international conferences and destinations to help achieve a greater competitiveadvantage.

An assessment of criteria to evaluate the graduate education program in Brazil

This study sought to identify criteria adequate for the evaluation of graduate programs in Brazil. A survey was the means for collecting the ratings and rankings given by faculty members at selected Brazilian graduate programs. A questionnaire using Likerttype and ranking items asked the importance attributed by each respondent to each of the 109 items listed. The data analysis reported in this dissertation indicates that the most highly rated criteria and indicators were: (1) Library: current periodicals; (2) Facilities: classrooms and laboratories; (3) Library: books and monographs; (4) Academic Environment: discussion, investigation, and expression; and (5) Facilities: research space and equipment. The study presents the means and standard deviations obtained for each indicator and also includes some figures obtained for a relational analysis. This dissertation was developed to provide useful information to educational planners, policy makers, administrators, and evaluators involved in Brazilian higher education or comparative studies. It is suggested that additional investigations concentrate on more specific and in-depth analysis and interpretation of the policymaking processes, i.e., on the study of social facts or organizational and academic variables in their relationships with aspects of the educational system. The appendices section includes a facsimile of the questionnaire and additional data.

European business schools and global leadership: an examination of the admission criteria of the european master in management programs ranked by the Financial Times 2010

O aumento de empresas que operam internacionalmente requer o desenvolvimento de líderes mundiais para colocar as estratégias em prática. Embora este processo de desenvolvimento é importante para o mundo corporativo, muitos futuros executivos são graduados de escolas de administração de empresas que estão intimamente ligados ao mundo de negócios e, portanto, desempenhão um papel importante no processo. Esta pesquisa examina se os programas europeus “Master in Management” classificado pelo Financial Times em 2010 selecionam aqueles candidatos que são mais adequados para o desenvolvimento de liderança global. Portanto, três anteriores meta-estudos são sintetizados para produzir um perfil de competências classificadas de um líder global. Então, informações sobre os critérios de admissão dos programas de mestrado são coletadas e comparadas com este perfil. Os resultados mostram que seis competências são medidas por mais da metade dos programas: proficiência em Inglês, capacidade analítica (racionamento lógico e quantitativo), capacidade de comunicação, conhecimento do negócio global, determinação para alcançar, motivação e capacidade interpessoal. Além disso, as habilidades operacionais requerentes pelos líderes globais não são significativas no processo de admissão e o foco é sobre as habilidades analíticas. Comparação dos resultados com o perfil anteriormente desenvolvido abrangente indica que uma quantidade significativa de programas pode subestimar o significado de habilidades pessoais e características para o desenvolvimento de líderes globais.

O que e o método científico: uma reflexão crítica sobre o método científico como subsídio para o ensino das ciências naturais

Ensinar ciência e, acima de tudo, ensinar o método científico e desenvolver a atitude crítica do estudante. Isto significa substituir a visão da ciência como uma coleção de fatos e teorias definitivamente estabelecidos, pela visão da ciência como um conhecimento racional - Porque crítico -, conjectural, provisório, sempre capaz de ser questionado e corrigido. Significa também opor à visão da ciência como uma representação completa e perfeita de fenômenos diretamente observáveis, a visão da ciência como uma reconstrução idealizada e parcial da realidade, que explica o visível pelo invisível. Nessa linha de raciocínio, devemos opor à idéia de uma observação pura e imparcial dos fatos, a ideia da observação guiada por hipóteses e teorias. Ensinar o meto do cientifico é questionar a ideia de que descobrimos e verificamos hipóteses através de procedimentos indutivos, substituindo-a pela ideia de que inventamos conjecturas ousadas, surgidas de nossa imaginação. Essas conjecturas, contudo, deverão ser testadas o mais severamente possível, através de tentativas de refutação que façam uso de experimentos controlados. No lugar da ilusória busca de teorias verificáveis, verdadeiras -ou pelo menos cada vez mais prováveis devemos buscar teorias de maior refutabilidade, cada vez mais amplas, precisas, profundas, de maior grau de corroboração e, talvez, mais próximas da verdade. Finalmente, ensinar o método científico significa também criticar cada uma das visões alternativas de ciência, propondo novos critérios para avaliar hipóteses e teorias científicas. É desnecessário dizer que estes critérios, por sua vez, devem também ser criticados, visto que a ausência de discussão crítica e a aceitação passiva e dogmática de um conjunto de ideias ou teorias e a não ciência, a pseudociência, enfim, a negação do espírito crítico e da racionalidade do homem.

Is what you say what you do? Analyzing and comparing the effect of buyer-supplier relationship in the Brazilian and Chinese supplier selection criteria

Choosing properly and efficiently a supplier has been challenging practitioners and academics since 1960’s. Since then, countless studies had been performed and relevant changes in the business scenario were considered such as global sourcing, quality-orientation, just-in-time practices. It is almost consensus that quality should be the selection driver, however, some polemical findings questioned this general agreement. Therefore, one of the objectives of the study was to identify the supplier selection criteria and bring this discussion back again. Moreover, Dickson (1966) suggested existing business relationship as selection criterion, then it was reviewed the importance of business relationship for the company and noted a set of potential negative effects that could rise from it. By considering these side effects of relationship, this research aimed to investigate how the relationship could influence the supplier selection and how its harmful effects could affect the selection process. The impact of this phenomenon was investigated cross-nationally. The research strategy adopted was a controlled experiment via vignette combined with discrete choice analysis. The data collections were performed in China and Brazil. By examining the results, it could be drawn five major findings. First, when purchasers were asked to declare their supplier selection priorities, quality was stated as the most important independently of country and relationship. This result was consistent with diverse studies since 60’s. However, when purchasers were exposed to a multi-criteria trade-off situation, their actual selection priorities deviate from what they had declared. In the actual decision-making without influence of buyer-supplier relationship, Brazilian purchasers focused on price and Chinese buyers prioritized delivery then price. This observation reinforced some controversial prior studies of Verma & Pullman (1998) and Hirakubo & Kublin (1998). Second, through the introduction of the buyer-supplier relationship (operationalized via relational capital) in the supplier selection process, this research extended the existing studies and found that Brazilian buyers still focused on price. The relationship became just another criterion for supplier selection such as quality and delivery. However, from the Chinese sample, the results suggested that quality was totally discarded and the decision was majorly made through price and relationship. The third finding suggested that relational capital could legitimate the quality and sustainability of the supplier and replaces these selection criteria and made the decisional task less complex. Additionally, with the relational capital, the decision-makings were associated to few biases such as availability cognition, commitment, confirmatory and perceived biases. By analyzing the purchasers’ behavior, relational capital inducted buyers of both countries to relax in their purchasing requirements (quality, delivery and sustainability) leading to potential negative effects. In the Brazilian sample, the phenomenon of willing to pay a higher price for a lower quality offer demonstrated to be a potential counterproductive and suboptimal decision. Finally, the last finding was associated to the cultural effect on the buyers’ decisions. From the outcome, it is possible to observe that if a purchaser’s cultural background is more relation-oriented, the more he will tend to use relational capital as a decision heuristic, thus, the purchaser will be more susceptible to the potential relationship’s side effects

Criteria for analysis of the structure of electronic scientific journals

This paper is the result of the Masters dissertation studying the role and history of scientific communication, especially the changes that have occurred after the appearance of electronic communication and computer networks. This study showed that hypertext systems are increasingly being used in the scientific and academic world in the production of electronic journals; this makes it possible for the user to rapidly access information in their area. However, these systems need to be improved to help the user during search and access to information. Both printed journals migrating to electronic media, and the exclusively electronic journals should present the current quality indicators. The attempt was made to discover whether characteristics related to printed journals are being maintained in their electronic counterparts. For this, a prototype model was developed to analyze the structure of electronic scientific journals; it composes 14 criteria expressing aspects of quality for these journals. It includes elements of Website Information Architecture and those already in place in printed scientific journals in order to ensure that basic functions - archiving and dissemination - are maintained in electronic publishing. Each criterion consists of variables, which measure the maintenance of these functions both in the migrating printed journals and the exclusively electronic ones. This prototype model was used to analyze Ciência da Informação On-line and DataGramaZero - Revista de Ciência da Informação. Results indicate that this model is able to find out if the basic functions of archiving and dissemination are being maintained in electronic journals. Therefore, its implementation is justified in electronic journals. The model can help librarians, authors, and users of electronic journals to identify quality journals, and assist editors in developing their projects. The material from the study may be included in the preservice and inservice education of Information Science professionals and to support editors of scientific journals.