Humoral autoimmune response heterogeneity in the spectrum of primary biliary cirrhosis

Objective To compare autoantibody features in patients with primary biliary cirrhosis (PBC) and individuals presenting antimitochondria antibodies (AMAs) but no clinical or biochemical evidence of disease. Methods A total of 212 AMA-positive serum samples were classified into four groups: PBC (definite PBC, n = 93); PBC/autoimmune disease (AID; PBC plus other AID, n = 37); biochemically normal (BN) individuals (n = 61); and BN/AID (BN plus other AID, n = 21). Samples were tested by indirect immunofluorescence (IIF) on rat kidney (IIF-AMA) and ELISA [antibodies to pyruvate dehydrogenase E2-complex (PDC-E2), gp-210, Sp-100, and CENP-A/B]. AMA isotype was determined by IIF-AMA. Affinity of anti-PDC-E2 IgG was determined by 8 M urea-modified ELISA. Results High-titer IIF-AMA was more frequent in PBC and PBC/AID (57 and 70 %) than in BN and BN/AID samples (23 and 19 %) (p < 0.001). Triple isotype IIF-AMA (IgA/IgM/IgG) was more frequent in PBC and PBC/AID samples (35 and 43 %) than in BN sample (18 %; p = 0.008; p = 0.013, respectively). Anti-PDC-E2 levels were higher in PBC (mean 3.82; 95 % CI 3.36–4.29) and PBC/AID samples (3.89; 3.15–4.63) than in BN (2.43; 1.92–2.94) and BN/AID samples (2.52; 1.54–3.50) (p < 0.001). Anti-PDC-E2 avidity was higher in PBC (mean 64.5 %; 95 % CI 57.5–71.5 %) and PBC/AID samples (66.1 %; 54.4–77.8 %) than in BN samples (39.2 %; 30.9–37.5 %) (p < 0.001). PBC and PBC/AID recognized more cell domains (mitochondria, nuclear envelope, PML/sp-100 bodies, centromere) than BN (p = 0.008) and BN/AID samples (p = 0.002). Three variables were independently associated with established PBC: high-avidity anti-PDC-E2 (OR 4.121; 95 % CI 2.118–8.019); high-titer IIF-AMA (OR 4.890; 2.319–10.314); antibodies to three or more antigenic cell domains (OR 9.414; 1.924–46.060). Conclusion The autoantibody profile was quantitatively and qualitatively more robust in definite PBC as compared with AMA-positive biochemically normal individuals.

Reaction intermediates of ethanol electro-oxidation on platinum investigated by SFG spectroscopy

Although electrochemical oxidation of simple organic molecules on metal catalysts is the basic ingredient of fuel cells, which have great technological potential as a renewable source of electrical energy, the detailed reaction mechanisms are in most cases not completely understood. Here, we investigate the ethanol-platinum interface in acidic aqueous solution using infrared-visible sum frequency generation (SFG) spectroscopy and theoretical calculations of vibrational spectra in order to identify the intermediates present during the electro-oxidation of ethanol. The complex vibrational spectrum in the fingerprint region imply on the coexistence of several adsorbates. Based on spectra in ultra-high-vacuum (UHV) and electrochemical environment from the literature and our density functional theory (DFT) calculations of vibrational spectra, new adsorbed intermediates, never before observed with conventional infrared (IR) spectroscopy, are proposed here: g2-acetaldehyde, g2-acetyl, ethylidyne, monodentate acetate, methoxy, tertiary methanol derivative, COH residue, g2-formaldehyde, mono and bidentate formate, CH3 and CH2 residues. In addition, we present new evidences for an ethoxy intermediate, a secondary ethanol derivative and an acetyl species, and we confirm the presence of previously observed adsorbates: a tertiary ethanol derivative, bidentate acetate, and COad. These results indicate that the platinum surface is much more reactive, and the reaction mechanism for ethanol electro-oxidation is considerably more complex than previously considered. This might be also true for many other molecule-catalyst systems.

The lactate paradox revisited in lowlanders during acclimatization to 4100 m and in high-altitude natives

[EN] Chronic hypoxia has been proposed to induce a closer coupling in human skeletal muscle between ATP utilization and production in both lowlanders (LN) acclimatizing to high altitude and high-altitude natives (HAN), linked with an improved match between pyruvate availability and its use in mitochondrial respiration. This should result in less lactate being formed during exercise in spite of the hypoxaemia. To test this hypothesis six LN (22-31 years old) were studied during 15 min warm up followed by an incremental bicycle exercise to exhaustion at sea level, during acute hypoxia and after 2 and 8 weeks at 4100 m above sea level (El Alto, Bolivia). In addition, eight HAN (26-37 years old) were studied with a similar exercise protocol at altitude. The leg net lactate release, and the arterial and muscle lactate concentrations were elevated during the exercise in LN in acute hypoxia and remained at this higher level during the acclimatization period. HAN had similar high values; however, at the moment of exhaustion their muscle lactate, ADP and IMP content and Cr/PCr ratio were higher than in LN. In conclusion, sea-level residents in the course of acclimatization to high altitude did not exhibit a reduced capacity for the active muscle to produce lactate. Thus, the lactate paradox concept could not be demonstrated. High-altitude natives from the Andes actually exhibit a higher anaerobic energy production than lowlanders after 8 weeks of acclimatization reflected by an increased muscle lactate accumulation and enhanced adenine nucleotide breakdown.

Effetti del chitosano su composti polifenolici in colture cellulari di vite: aspetti molecolari e metabolici

Polyphenols, including flavonoids and stilbenes, are an essential part of human diet and constitute one of the most abundant and ubiquitous group of plant secondary metabolites. The level of these compounds is inducible by stress or fungal attack, so attempts are being made to identify likely biotic and abiotic elicitors and to better understand the underlying mechanism. Resveratrol (3,5,4’-trihydroxystilbene), which belongs to the stilbene family, is a naturally occurring polyphenol, found in several fruits, vegetables and beverages including red wine. It is one of the most important plant polyphenols with proved benefic activity on animal health. In the last two decades, the potential protective effects of resveratrol against cardiovascular and neurodegenerative diseases, as well as the chemopreventive properties against cancer, have been largely investigated. The most important source of polyphenols and in particular resveratrol for human diet is grape (Vitis vinifera). Since stilbenes and flavonoids play a very important role in plant defence responses and enviromental interactions, and their effects on human health seem promising, the aim of the research of this Thesis was to study at different levels the activation and the regulation of their biosynthetic pathways after chitosan treatment. Moreover, the polyphenol production in grape cells and the optimisation of cultural conditions bioreactor scale-up, were also investigated. Cell suspensions were obtained from cv. Barbera (Vitis vinifera L.) petioles and were treated with a biotic elicitor, chitosan (50 μg/mL, dissolved in acetic acid) to promote phenylpropanoid metabolism. Chitosan is a D-glucosamine polymer from fungi cell wall and therefore mimes fungal pathogen attack. Liquid cultures have been monitored for 15 days, measuring cell number, cell viability, pH and grams of fresh weight. The endogenous and released amounts of 7 stilbenes (trans and cis isomers of resveratrol, piceid and resveratroloside, and piceatannol), gallic acid, 6 hydroxycinnamic acids (trans-cinnamic, p-coumaric, caffeic, ferulic, sinapic and chlorogenic acids), 5 catechines (catechin, epicatechin, epigallocatechin-gallate (EGCG), epigallocatechin and epicatechin-gallate) and other 5 flavonoids (chalcon, naringenin, kaempferol, quercetin and rutin) in cells and cultural medium, were measured by HPLC-DAD analysis and total anthocyanins were quantified by spectrophotometric analysis. Chitosan was effective in stimulating trans-resveratrol endogenous accumulation with a sharp peak at day 4 (exceeding acetic acid and water controls by 36% and 63%, respectively), while it did not influence the production of the cis-isomer. Compared to both water and acetic acid controls, chitosan decreased the release of both trans- and cis-resveratrol respect to controls. No effect was shown on the accumulation of single resveratrol mono-glucoside isomers, but considering their total amount, normalized for the relative water control, it was possible to evidence an increase in both accumulation and release of those compounds, in chitosan-treated cells, throughout the culture period and particularly during the second week. Many of the analysed flavonoids and hydroxycinnamic acids were not present or detectable in trace amounts. Catechin, epicatechin and epigallocatechin-gallate (EGCG) were detectable both inside the cells and in the culture media, but chitosan did not affect their amounts. On the contrary, total anthocyanins have been stimulated by chitosan and their level, from day 4 to 14, was about 2-fold higher than in both controls, confirming macroscopic observations that treated suspensions showed an intense brown-red color, from day 3 onwards. These elicitation results suggest that chitosan selectively up-regulates specific biosynthetic pathways, without modifying the general accumulation pattern of other flavonoids. Proteins have been extracted from cells at day 4 of culture (corresponding to the production peak of trans-resveratrol) and separated by bidimensional electrophoresis. The 73 proteins that showed a consistently changed amount between untreated, chitosan and acetic acid (chitosan solvent) treated cells, have been identified by mass spectrometry. Chitosan induced an increase in stilbene synthase (STS, the resveratrol biosynthetic enzyme), chalcone-flavanone isomerase (CHI, that switches the pathway from chalcones to flavones and anthocyanins), pathogenesis-related proteins 10 (PRs10, a large family of defence proteins), and a decrease in many proteins belonging to primary metabolisms. A train of six distinct spots of STS encoded by the same gene and increased by chitosan, was detected on the 2-D gels, and related to the different phosphorylation degree of STS spots. Northern blot analyses have been performed on RNA extracted from cells treated with chitosan and relative controls, using probes for STS, PAL (phenylalanine ammonia lyase, the first enzyme of the biosynthetic pathway), CHS (chalcone synthase, that shares with STS the same precursors), CHI and PR-10. The up-regulation of PAL, CHS and CHI transcript expression levels correlated with the accumulation of anthocyanins. The strong increase of different molecular weight PR-10 mRNAs, correlated with the 11 PR-10 protein spots identified in proteomic analyses. The sudden decrease in trans-resveratrol endogenous accumulation after day 4 of culture, could be simply explained by the diminished resveratrol biosynthetic activity due to the lower amount of biosynthetic enzymes. This might be indirectly demonstrated by northern blot expression analyses, that showed lower levels of phenylalanine ammonia lyase (PAL) and stilbene synthase (STS) mRNAs starting from day 4. Other possible explanations could be a resveratrol oxidation process and/or the formation of other different mono-, di-glucosides and resveratrol oligomers such as viniferins. Immunolocalisation experiments performed on grape protoplasts and the subsequent analyses by confocal microscope, showed that STS, and therefore the resveratrol synthetic site, is mostly associated to intracellular membranes close to the cytosolic side of plasma membrane and in a smaller amount is localized in the cytosol. STS seemed not to be present inside vacuole and nucleus. There were no differences in the STS intracellular localisation between the different treatments. Since it was shown that stilbenes are largely released in the culture medium and that STS is a soluble protein, a possible interaction of STS with a plasma membrane transporter responsible for the extrusion of stilbenes in the culture medium, might be hypothesized. Proteomic analyses performed on subcellular fractions identified in the microsomial fraction 5 proteins taking part in channel complexes or associated with channels, that significantly changed their amount after chitosan treatment. In soluble and membrane fractions respectively 3 and 4 STS and 6 and 3 PR-10 have been identified. Proteomic results obtained from subcellular fractions substantially confirmed previous result obtained from total cell protein extracts and added more information about protein localisation and co-localisation. The interesting results obtained on Barbera cell cultures with the aim to increase polyphenol (especially stilbenes) production, have encouraged scale up tests in 1 litre bioreactors. The first trial fermentation was performed in parallel with a normal time-course in 20 mL flasks, showing that the scale-up (bigger volume and different conditions) process influenced in a very relevant way stilbenes production. In order to optimise culture parameters such as medium sucrose amount, fermentation length and inoculum cell concentration, few other fermentations were performed. Chitosan treatments were also performed. The modification of each parameter brought relevant variations in stilbenes and catechins levels, so that the production of a certain compound (or class of compounds) could be hypothetically promoted by modulating one or more culture parameters. For example the catechin yield could be improved by increasing sucrose content and the time of fermentation. The best results in stilbene yield were obtained in a 800 mL fermentation inoculated with 10.8 grams of cells and supplemented with chitosan. The culture was fed with MS medium added with 30 g/L sucrose, 25 μg/mL rifampicin and 50 μg/mL of chitosan, and was maintained at 24°C, stirred by marine impeller at 100 rpm and supplied of air at 0.16 L/min rate. Resveratroloside was the stilbene present in the larger amount, 3-5 times more than resveratrol. Because resveratrol glucosides are similarly active and more stable than free resveratrol, their production using a bioreactor could be a great advantage in an hypothetical industrial process. In my bioreactor tests, stilbenes were mainly released in the culture medium (60-80% of the total) and this fact could be another advantage for industrial applications, because it allows recovering the products directly from the culture medium without stopping the fermentation and/or killing the cells. In my best cultural conditions, it was possible to obtain 3.95 mg/L of stilbenes at day 4 (maximum resveratrol accumulation) and 5.13 mg/L at day 14 (maximum resveratroloside production). In conclusion, chitosan effect in inducing Vitis vinifera defense mechanisms can be related to its ability to increase the intracellular content of a large spectrum of antioxidants, and in particular of resveratrol, its derivates and anthocyanins. Its effect can be observed at transcriptional, proteomic (variation of soluble and membrane protein amounts) and metabolic (polyphenols production) level. The chitosan ability to elicit specific plant matabolisms can be useful to produce large quantities of antioxidant compounds from cell culture in bioreactor.

Esperienze sul trattamento di essiccamento fanghi da depurazione presso il termovalorizzatore di Coriano (RN)

L’argomento trattato in questo elaborato è il problema sempre più emergente dello smaltimento dei fanghi provenienti dalla depurazione delle acque reflue. La quantità di fanghi da smaltire, infatti, è in continuo aumento e continuerà a crescere nel corso dei prossimi anni a causa di trattamenti sempre più spinti di depurazione e della costruzione di nuovi impianti. Dopo aver analizzato i vari scenari possibili per lo smaltimento dei fanghi ed i relativi costi, si passa ad analizzare le varie tecniche utilizzate per l’essiccamento dei fanghi (dirette ed indirette), includendo anche tecniche di ultima generazione come l’essiccamento per via solare. Si è andati poi ad analizzare nel dettaglio il funzionamento dell’impianto di essiccamento termico dei fanghi di depurazione di Coriano (RN), situato presso il termovalorizzatore e che sfrutta il calore proveniente da questo come fonte di calore per essiccare i fanghi. Sono state evidenziate le varie parti che compongono l’impianto e le caratteristiche delle correnti in ingresso ed uscita. Si è passati poi ad analizzare il pericolo di esplosione, all’interno dello stesso impianto, dovuto alla presenza di miscele esplosive formate dalla polvere organica del fango e dall’aria. Si sono analizzate tutte le modifiche apportate all’impianto in modo tale da prevenire questo rischio di esplosione. Infine è stata condotta una valutazione economica per dimostrare che l’essiccamento dei fanghi risulta un processo molto conveniente, perché consente di ridurre i volumi da trattare, e, quindi, di conseguenza anche i costi dello smaltimento finale.

Variation in peach fruit susceptibility to Monilinia laxa and gene expression

Brown rot caused by Monilinia laxa and Monilinia fructigena is considered one of the most important diseases affecting Prunus species. Although some losses can result from the rotten fruits in the orchard, most of the damage is caused to fruits during the post-harvest phase. Several studies reported that brown rot incidence during fruit development highly varies; it was found that at a period corresponding to the the pit hardening stage, fruit susceptibility drastically decreases, to be quickly restored afterwards. However the molecular basis of this phenomenon is still not well understood. Furthermore, no difference in the rot incidence was found between wound and un-wound fruits, suggesting that resistance associated more to a specifc biochemical response of the fruit, rather than to a higher mechanical resistance. So far, the interaction Monilinia-peach was analyzed through chemical approaches. In this study, a bio-molecular approach was undertaken in order to reveal alteration in gene expression associated to the variation of susceptibility. In this thesis three different methods for gene expression analysis were used to analyze the alterations in gene expression occurring in peach fruits during the pit hardening stage, in a period encompassing the temporary change in Monilinia susceptibility: real time PCR, microarray and cDNA AFLP techniques. In 2005, peach fruits (cv.K2) were weekly harvested during a 19-week long-period, starting from the fourth week after full bloom, until full maturity. At each sampling time, three replicates of 5 fruits each were dipped in the M.laxa conidial suspension or in distilled water, as negative control. The fruits were maintained at room temperature for 3 hours; afterwards, they were peeled with a scalpel; the peel was immediately frozen in liquid nitrogen and transferred to -80 °C until use. The degree of susceptibility of peach fruit to the pathogen was determined on 3 replicates of 20 fruits each, as percentage of infected fruits, after one week at 20 °C. Real time PCR analysis was performed to study the variation in expression of those genes encoding for the enzymes of the phenylpropanoid pathway (phenylalanine ammonia lyase (PAL), chalcone synthase (CHS), cinnamate 4-hydroxylase (C4H), leucoanthocyanidine reductase (LAR), hydroxycinnamoyl CoA quinate hydroxycinnamoyl transferase (HQT) and of the jasmonate pathway, such as lipoxygenase (LOX), both involved in the production of important defense compounds. Alteration in gene expression was monitored on fruit samples of a period encompassing the pit hardening stage and the corresponding temporary resistance to M.laxa infections, weekly, from the 6thto the 12th week after full bloom (AFB) inoculated with M. laxa or mock-inoculated. The data suggest a critical change in the expression level of the phenylpropanoid pathway from the 7th to the 8th week AFB; such change could be directly physiologically associated to the peach growth and it could indirectly determine the decrease of susceptibility of peach fruit to Monilinia rot during the subsequent weeks. To investigate on the transcriptome variation underneath the temporary loss of susceptibility of peach fruits to Monilinia rot, the microarray and the cDNA AFLP techniques were used. The samples harvested on the 8th week AFB (named S, for susceptible ones) and on the 12th week AFB (named R, for resistant ones) were compared, both inoculated or mock-inoculated. The microarray experiments were carried out at the University of Padua (Dept. of Environmental Agronomy and Crop Science), using the μPEACH1.0 microarray together with the suited protocols. The analysis showed that 30 genes (corresponding to the 0.6% of the total sequences (4806) contained in the μPeach1.0 microarray) were found up-regulated and 31 ( 0.6%) down regulated in RH vs. SH fruits. On the other hand, 20 genes (0.4%) were shown to be up-regulated and 13 (0.3%) down-regulated in the RI vs. SI fruit. No genes were found differentially expressed in the mock-inoculated resistant fruits (RH) vs. the inoculated resistant ones (RI). Among the up-regulated genes an ATP sulfurylase, an heat shock protein 70, the major allergen Pru P1, an harpin inducing protein and S-adenosylmethionine decarboxylase were found, conversely among the down-regulated ones, cinnamyl alcohol dehydrogenase, an histidine- containing phosphotransfer protein and the ferritin were found. The microarray experimental results and the data indirectly derived, were tested by Real Time PCR analysis. cDNA AFLP analysis was also performed on the same samples. 339 transcript derived fragments considered significant for Monilinia resistance, were selected, sequenced and classified. Genes potentially involved in cell rescue and defence were well represented (8%); several genes (12.1%) involved in the protein folding, post-transductional modification and genes (9.2%) involved in cellular transport were also found. A further 10.3% of genes were classified as involved in the metabolism of aminoacid, carbohydrate and fatty acid. On the other hand, genes involved in the protein synthesis (5.7%) and in signal transduction and communication (5.7%) were found. Among the most interesting genes found differentially expressed between susceptible and resistant fruits, genes encoding for pathogenesis related (PR) proteins were found. To investigate on the association of Monilinia resistance and PR biological function, the major allergen Pru P1 (GenBank accession AM493970) and its isoform (here named Pru P2), were expressed in heterologous system and in vitro assayed for their anti-microbial activity. The ribonuclease activity of the recombinant Pru P1 and Pru P2 proteins was assayed against peach total RNA. As the other PR10 proteins, they showed a ribonucleolytic activity, that could be important to contrast pathogen penetration. Moreover Pru P1 and Pru P2 recombinant proteins were checked for direct antimicrobial activity. No inhibitory effect of Pru P1 or Pru P2 was detected against the selected fungi.

Identificazione dei parametri meccanici del ponte metallico ferroviario a Pontelagoscuro attraverso un algoritmo di ottimizzazione di tipo evolutivo

Nel periodo storico compreso tra la seconda metà dell’Ottocento ed il primo ventennio del Novecento, un’ondata di innovazioni tecnologiche e scientifiche, unitamente all’espansione dell’industria siderurgica e la conseguente diffusione del ferro come materiale da costruzione, portarono alla realizzazione di strutture metalliche grandiose. Ciò fu reso possibile grazie ad una fervida attività di ricerca che permise la risoluzione di problematiche tecniche di assoluto rilievo, come la progettazione di grandi coperture o di ponti destinati al traffico ferroviario in grado di coprire luci sempre maggiori. In questo contesto si sviluppò il sistema della chiodatura come metodo di unione per il collegamento rigido e permanente dei vari elementi che compongono la struttura portante metallica. Ad oggi il sistema della chiodatura è stato quasi completamente sostituito dalla bullonatura di acciaio ad alta resistenza e dalla saldatura, che garantendo gli stessi standard di affidabilità e sicurezza, offrono vantaggi in termini economici e di rapidità esecutiva. Tuttavia lo studio delle unioni chiodate continua a rivestire notevole importanza in tutti quei casi in cui il progettista debba occuparsi di restauro, manutenzione o adeguamento di strutture esistenti che in molti casi continuano ad assolvere le funzioni per le quali erano state progettate. La valutazione delle strutture esistenti, in particolare i ponti, ha assunto un’importanza sempre crescente. L’incremento della mobilità e del traffico sulle infrastrutture di trasporto ha portato ad un incremento contemporaneo di carichi e velocità sui ponti. In particolare nelle ferrovie, i ponti rappresentano una parte strategica della rete ferroviaria e in molti casi, essi hanno già raggiunto i loro limiti di capacità di traffico, tanto è vero che l’età media del sessanta percento dei ponti metallici ferroviari è di un centinaio di anni. Pertanto i carichi di servizio, i cicli di sforzo accumulati a causa dei carichi da traffico e il conseguente invecchiamento delle strutture esistenti, inducono la necessità della valutazione della loro rimanente vita a fatica. In questo contesto, la valutazione delle condizioni del ponte e le conseguenti operazioni di manutenzione o sostituzione diventano indispensabili. Negli ultimi decenni sono state effettuate numerose iniziative di ricerca riguardo il comportamento a fatica dei ponti ferroviari chiodati, poiché le passate esperienze hanno mostrato che tali connessioni sono suscettibili di rotture per fatica. Da uno studio dell’ASCE Committee on Fatigue and Fracture Reliability è emerso che l’ottanta, novanta percento delle crisi nelle strutture metalliche è da relazionarsi ai fenomeni di fatica e frattura. Il danno per fatica riportato dai ponti chiodati è stato osservato principalmente sulle unioni tra elementi principali ed è causato dagli sforzi secondari, che si possono sviluppare in diverse parti delle connessioni. In realtà riguardo la valutazione della fatica sui ponti metallici chiodati, si è scoperto che giocano un ruolo importante molti fattori, anzitutto i ponti ferroviari sono soggetti a grandi variazioni delle tensioni indotte da carichi permanenti e accidentali, così come imperfezioni geometriche e inclinazioni o deviazioni di elementi strutturali comportano sforzi secondari che solitamente non vengono considerati nella valutazione del fenomeno della fatica. Vibrazioni, forze orizzontali trasversali, vincoli interni, difetti localizzati o diffusi come danni per la corrosione, rappresentano cause che concorrono al danneggiamento per fatica della struttura. Per questo motivo si studiano dei modelli agli elementi finiti (FE) che riguardino i particolari delle connessioni e che devono poi essere inseriti all’interno di un modello globale del ponte. L’identificazione degli elementi critici a fatica viene infatti solitamente svolta empiricamente, quindi è necessario che i modelli numerici di cui si dispone per analizzare la struttura nei particolari delle connessioni, così come nella sua totalità, siano il più corrispondenti possibile alla situazione reale. Ciò che ci si propone di sviluppare in questa tesi è un procedimento che consenta di affinare i modelli numerici in modo da ottenere un comportamento dinamico analogo a quello del sistema fisico reale. Si è presa in esame la seguente struttura, un ponte metallico ferroviario a binario unico sulla linea Bologna – Padova, che attraversa il fiume Po tra le località di Pontelagoscuro ed Occhiobello in provincia di Ferrara. Questo ponte fu realizzato intorno agli anni che vanno dal 1945 al 1949 e tra il 2002 e il 2006 ha subito interventi di innalzamento, ampliamento ed adeguamento nel contesto delle operazioni di potenziamento della linea ferroviaria, che hanno portato tra l’altro all’affiancamento di un nuovo ponte, anch’esso a singolo binario, per i convogli diretti nella direzione opposta. Le travate metalliche del ponte ferroviario sono costituite da travi principali a traliccio a gabbia chiusa, con uno schema statico di travi semplicemente appoggiate; tutte le aste delle travi reticolari sono formate da profilati metallici in composizione chiodata. In particolare si è rivolta l’attenzione verso una delle travate centrali, della quale si intende affrontare un’analisi numerica con caratterizzazione dinamica del modello agli Elementi Finiti (FEM), in modo da conoscerne lo specifico comportamento strutturale. Ad oggi infatti l’analisi strutturale si basa prevalentemente sulla previsione del comportamento delle strutture tramite modelli matematici basati su procedimenti risolutivi generali, primo fra tutti il Metodo agli Elementi Finiti. Tuttavia i risultati derivanti dal modello numerico possono discostarsi dal reale comportamento della struttura, proprio a causa delle ipotesi poste alla base della modellazione. Difficilmente infatti si ha la possibilità di riscontrare se le ipotesi assunte nel calcolo della struttura corrispondano effettivamente alla situazione reale, tanto più se come nella struttura in esame si tratta di una costruzione datata e della quale si hanno poche informazioni circa i dettagli relativi alla costruzione, considerando inoltre che, come già anticipato, sforzi secondari e altri fattori vengono trascurati nella valutazione del fenomeno della fatica. Nel seguito si prenderanno in esame le ipotesi su masse strutturali, rigidezze dei vincoli e momento d’inerzia delle aste di parete, grandezze che caratterizzano in particolare il comportamento dinamico della struttura; per questo sarebbe ancora più difficilmente verificabile se tali ipotesi corrispondano effettivamente alla costruzione reale. Da queste problematiche nasce l’esigenza di affinare il modello numerico agli Elementi Finiti, identificando a posteriori quei parametri meccanici ritenuti significativi per il comportamento dinamico della struttura in esame. In specifico si andrà a porre il problema di identificazione come un problema di ottimizzazione, dove i valori dei parametri meccanici vengono valutati in modo che le caratteristiche dinamiche del modello, siano il più simili possibile ai risultati ottenuti da elaborazioni sperimentali sulla struttura reale. La funzione costo è definita come la distanza tra frequenze proprie e deformate modali ottenute dalla struttura reale e dal modello matematico; questa funzione può presentare più minimi locali, ma la soluzione esatta del problema è rappresentata solo dal minimo globale. Quindi il successo del processo di ottimizzazione dipende proprio dalla definizione della funzione costo e dalla capacità dell’algoritmo di trovare il minimo globale. Per questo motivo è stato preso in considerazione per la risoluzione del problema, l’algoritmo di tipo evolutivo DE (Differential Evolution Algorithm), perché gli algoritmi genetici ed evolutivi vengono segnalati per robustezza ed efficienza, tra i metodi di ricerca globale caratterizzati dall’obiettivo di evitare la convergenza in minimi locali della funzione costo. Obiettivo della tesi infatti è l’utilizzo dell’algoritmo DE modificato con approssimazione quadratica (DE-Q), per affinare il modello numerico e quindi ottenere l’identificazione dei parametri meccanici che influenzano il comportamento dinamico di una struttura reale, il ponte ferroviario metallico a Pontelagoscuro.

Structural changes and dynamic behaviour of vanadium oxide-based catalysts for gas-phase selective oxidations

Selective oxidation is one of the simplest functionalization methods and essentially all monomers used in manufacturing artificial fibers and plastics are obtained by catalytic oxidation processes. Formally, oxidation is considered as an increase in the oxidation number of the carbon atoms, then reactions such as dehydrogenation, ammoxidation, cyclization or chlorination are all oxidation reactions. In this field, most of processes for the synthesis of important chemicals used vanadium oxide-based catalysts. These catalytic systems are used either in the form of multicomponent mixed oxides and oxysalts, e.g., in the oxidation of n-butane (V/P/O) and of benzene (supported V/Mo/O) to maleic anhydride, or in the form of supported metal oxide, e.g., in the manufacture of phthalic anhydride by o-xylene oxidation, of sulphuric acid by oxidation of SO2, in the reduction of NOx with ammonia and in the ammoxidation of alkyl aromatics. In addition, supported vanadia catalysts have also been investigated for the oxidative dehydrogenation of alkanes to olefins , oxidation of pentane to maleic anhydride and the selective oxidation of methanol to formaldehyde or methyl formate [1]. During my PhD I focused my work on two gas phase selective oxidation reactions. The work was done at the Department of Industrial Chemistry and Materials (University of Bologna) in collaboration with Polynt SpA. Polynt is a leader company in the development, production and marketing of catalysts for gas-phase oxidation. In particular, I studied the catalytic system for n-butane oxidation to maleic anhydride (fluid bed technology) and for o-xylene oxidation to phthalic anhydride. Both reactions are catalyzed by systems based on vanadium, but catalysts are completely different. Part A is dedicated to the study of V/P/O catalyst for n-butane selective oxidation, while in the Part B the results of an investigation on TiO2-supported V2O5, catalyst for o-xylene oxidation are showed. In Part A, a general introduction about the importance of maleic anhydride, its uses, the industrial processes and the catalytic system are reported. The reaction is the only industrial direct oxidation of paraffins to a chemical intermediate. It is produced by n-butane oxidation either using fixed bed and fluid bed technology; in both cases the catalyst is the vanadyl pyrophosphate (VPP). Notwithstanding the good performances, the yield value didn’t exceed 60% and the system is continuously studied to improve activity and selectivity. The main open problem is the understanding of the real active phase working under reaction conditions. Several articles deal with the role of different crystalline and/or amorphous vanadium/phosphorous (VPO) compounds. In all cases, bulk VPP is assumed to constitute the core of the active phase, while two different hypotheses have been formulated concerning the catalytic surface. In one case the development of surface amorphous layers that play a direct role in the reaction is described, in the second case specific planes of crystalline VPP are assumed to contribute to the reaction pattern, and the redox process occurs reversibly between VPP and VOPO4. Both hypotheses are supported also by in-situ characterization techniques, but the experiments were performed with different catalysts and probably under slightly different working conditions. Due to complexity of the system, these differences could be the cause of the contradictions present in literature. Supposing that a key role could be played by P/V ratio, I prepared, characterized and tested two samples with different P/V ratio. Transformation occurring on catalytic surfaces under different conditions of temperature and gas-phase composition were studied by means of in-situ Raman spectroscopy, trying to investigate the changes that VPP undergoes during reaction. The goal is to understand which kind of compound constituting the catalyst surface is the most active and selective for butane oxidation reaction, and also which features the catalyst should possess to ensure the development of this surface (e.g. catalyst composition). On the basis of results from this study, it could be possible to project a new catalyst more active and selective with respect to the present ones. In fact, the second topic investigated is the possibility to reproduce the surface active layer of VPP onto a support. In general, supportation is a way to improve mechanical features of the catalysts and to overcome problems such as possible development of local hot spot temperatures, which could cause a decrease of selectivity at high conversion, and high costs of catalyst. In literature it is possible to find different works dealing with the development of supported catalysts, but in general intrinsic characteristics of VPP are worsened due to the chemical interaction between active phase and support. Moreover all these works deal with the supportation of VPP; on the contrary, my work is an attempt to build-up a V/P/O active layer on the surface of a zirconia support by thermal treatment of a precursor obtained by impregnation of a V5+ salt and of H3PO4. In-situ Raman analysis during the thermal treatment, as well as reactivity tests are used to investigate the parameters that may influence the generation of the active phase. Part B is devoted to the study of o-xylene oxidation of phthalic anhydride; industrially, the reaction is carried out in gas-phase using as catalysts a supported system formed by V2O5 on TiO2. The V/Ti/O system is quite complex; different vanadium species could be present on the titania surface, as a function of the vanadium content and of the titania surface area: (i) V species which is chemically bound to the support via oxo bridges (isolated V in octahedral or tetrahedral coordination, depending on the hydration degree), (ii) a polymeric species spread over titania, and (iii) bulk vanadium oxide, either amorphous or crystalline. The different species could have different catalytic properties therefore changing the relative amount of V species can be a way to optimize the catalytic performances of the system. For this reason, samples containing increasing amount of vanadium were prepared and tested in the oxidation of o-xylene, with the aim of find a correlations between V/Ti/O catalytic activity and the amount of the different vanadium species. The second part deals with the role of a gas-phase promoter. Catalytic surface can change under working conditions; the high temperatures and a different gas-phase composition could have an effect also on the formation of different V species. Furthermore, in the industrial practice, the vanadium oxide-based catalysts need the addition of gas-phase promoters in the feed stream, that although do not have a direct role in the reaction stoichiometry, when present leads to considerable improvement of catalytic performance. Starting point of my investigation is the possibility that steam, a component always present in oxidation reactions environment, could cause changes in the nature of catalytic surface under reaction conditions. For this reason, the dynamic phenomena occurring at the surface of a 7wt% V2O5 on TiO2 catalyst in the presence of steam is investigated by means of Raman spectroscopy. Moreover a correlation between the amount of the different vanadium species and catalytic performances have been searched. Finally, the role of dopants has been studied. The industrial V/Ti/O system contains several dopants; the nature and the relative amount of promoters may vary depending on catalyst supplier and on the technology employed for the process, either a single-bed or a multi-layer catalytic fixed-bed. Promoters have a quite remarkable effect on both activity and selectivity to phthalic anhydride. Their role is crucial, and the proper control of the relative amount of each component is fundamental for the process performance. Furthermore, it can not be excluded that the same promoter may play different role depending on reaction conditions (T, composition of gas phase..). The reaction network of phthalic anhydride formation is very complex and includes several parallel and consecutive reactions; for this reason a proper understanding of the role of each dopant cannot be separated from the analysis of the reaction scheme. One of the most important promoters at industrial level, which is always present in the catalytic formulations is Cs. It is known that Cs plays an important role on selectivity to phthalic anhydride, but the reasons of this phenomenon are not really clear. Therefore the effect of Cs on the reaction scheme has been investigated at two different temperature with the aim of evidencing in which step of the reaction network this promoter plays its role.

Sintesi e caratterizzazione di La0.4Sr0.4TiO3 (LST) come anodo innovativo per celle a combustibile ad ossido solido (SOFC)

Le celle a combustibile ad ossido solido (SOFC) sono reattori elettrochimici che convertono l’energia chimica di un gas combustibile direttamente in energia elettrica con un’alta efficienza e con basse emissioni. Il materiale più comunemente usato come anodo, il Ni/YSZ cermet, mostra però numerosi svantaggi nell’applicazione quali la suscettibilità all’avvelenamento da zolfo e la deposizione di coke per cracking degli idrocarburi usati come combustibile. E’ perciò necessario sviluppare materiali alternativi che sopperiscano a questi problemi. Il titanato di stronzio drogato con lantanio con stechiometria La0.4Sr0.4TiO3 (LST) è stato scelto come anodo alternativo per le ottime proprietà possedute. Lo scopo del lavoro di tesi è stato quindi lo studio dell’influenza della natura dei precursori, delle condizioni di sintesi e dell’aggiunta di agenti porizzanti necessari per l’ottenimento della fase perovskitica pura e con porosità controllata. In un primo tempo è stata verificata la possibilità di ottenere la fase La0.4Sr0.4TiO3 pura mediante sintesi allo stato solido, trattando termicamente miscele di precursori diversi. I risultati ottenuti hanno evidenziato che l’utilizzo di nitrati metallici porta a risultati migliori rispetto all’utilizzo di carbonati ed ossidi poiché permette la formazione della fase perovskite a temperature inferiori e con una purezza maggiore. Poiché l’analisi elementare sui materiali preparati in questa prima fase ha evidenziato un problema sulla stechiometria, il metodo di sintesi è stato ottimizzato solubilizzando preventivamente i precursori di lantanio e stronzio e determinandone il titolo mediante ICP. Inoltre, sono state effettuate delle sintesi utilizzando TiO2 a diversa area superficiale, per verificare l’effetto sulle fasi formate di una maggior reattività di questo componente. Per completezza la perovskite è stata sintetizzata anche tramite sintesi sol-gel, utilizzando il metodo Pechini, ottenendo a 700°C la fase pura. L’analisi morfologica ha evidenziato che le polveri con caratteristiche migliori per la formatura sono quelle ottenute tramite sintesi allo stato solido. Le pastiglie prodotte, miscelando tali polveri e agenti porizzanti opportuni, hanno evidenziato la stabilità della fase perovskitica voluta ma anche la necessità di ottimizzare l’aggiunta del porizzante per avere una porosità adeguata all’applicazione del sistema quale anodo SOFC.

Zuckertransport und Regulation des Hexosestoffwechsels bei Oenococcus oeni

Das Milchsäurebakterium Oenococcus oeni, welches für den biologischen Säureabbau im Wein eingesetzt wird, verstoffwechselt Hexosen über den Phosphoketolaseweg. Dabei können beträchtliche Mengen Acetat entstehen. Die Ursachen dafür wurden untersucht, insbesondere der Fructosestoffwechsel. Außerdem wurde der Hexosetransport untersucht, über den bei O. oeni noch nichts bekannt war. Die Aufnahme von Hexosen in die Zelle erfolgt mit hoher Affinität (KM=10 µM) über einen Symport mit H+, aber mit sehr niedriger spezifischer Aktivität (Vmax=9 U / g TG). Zusätzlich werden Hexosen mit ausreichender Aktivität über (vermutlich erleichterte) Diffusion in die Zelle transportiert, allerdings nur bei hohen Hexosekonzentrationen. Es wurden Gene gefunden, die für ein Hexose- Phosphotransferasesystem kodieren, welches in O. oeni keine bedeutende Rolle beim Transport spielt, aber vermutlich eine regulative Funktion hat. Zur Bildung von Essigsäure tragen verschiedene Faktoren bei: Der Ethanolweg, der in der heterofermentativen Milchsäuregärung die Reoxidation von NAD(P)H bewerkstelligt, ist durch die niedrige spezifische Aktivität der Acetaldehyddehydrogenase limitiert. Diese Limitierung wird noch verstärkt, wenn die zellulären Gehalte von Coenzym A aufgrund von Pantothensäuremangel niedrig sind. O. oeni umgeht durch Bildung von Erythrit die Limitierung, und Acetylphosphat wird nicht zu Ethanol reduziert, sondern als Acetat ausgeschieden. Bei Cofermentation von Hexosen mit externen Elektronenakzeptoren, wie Fructose, Pyruvat oder Sauerstoff, werden letztere zur Reoxidation von NAD(P)H genutzt, und als Folge wird Acetat ausgeschieden. Der Fluss von Fructose in den Phosphoketolaseweg wird durch das Enzym Phosphoglucoseisomerase verhindert, wenn dieses durch 6-Phosphogluconat gehemmt wird. Als Konsequenz wird Fructose im Mannitweg reduziert, was die Bildung von Essigsäure im Phosphoketolaseweg fördert. Bei niedrigen Wachstums- und Stoffwechselraten, z.B. bei C-Limitierung, ist der Ethanolweg nicht limitierend für den Stoffwechsel, und Hexosen werden über heterofermentative Milchsäuregärung umgesetzt, ohne daß Acetat entsteht. Pyruvat kann gleichzeitig als Elektronenakzeptor und als Energiequelle dienen: O. oeni ist in der Lage, Pyruvat mittels Disproportionierung zu Lactat und Acetat+CO2 zu fermentieren, und dabei Energie zu konservieren (0,5 ATP / Pyruvat).

Endogene DNA-Schädigung als Ursache genetischer Instabilität

Zusammenfassung Diese Arbeit beschreibt Untersuchungen über die zellulären Mechanismen, die zur Bildung dieser DNA-Schäden führen, sowie über die biologischen Auswirkungen dieser Schäden. Die Untersuchungen zu Uracil in der DNA wurden in ung-knockout-MEFs und Mäusen durchgeführt, die es erlauben, die Konsequenzen eines Ausfalls der wichtigsten Reparaturglykosylase für Uracil zu beleuchten. Die Ergebnisse zeigen eine deutliche Akkumulation von Uracil in den ung-/--Mausfibroblasten im Vergleich zum Wildtyp. In frisch isolierten Leber- und Milzzellen der Mäuse konnte dieser genotypspezifische Unterschied, wenn auch weniger ausgeprägt, ebenso beobachtet werden, nicht jedoch in reifen Spermien. Dieser gewebespezifische Unterschied und die quantitativ stärker ausgeprägte Akkumulation in ung-/--Mausfibroblasten im Vergleich zu den Mäusegeweben gab Anlass zur Vermutung, dass die Proliferation der Zellen für den Haupteintrag an Uracil in die DNA verantwortlich ist. Erstmals konnte in Versuche mit konfluenten (nicht mehr proliferierenden) ung-/--Mausfibroblasten gezeigt werden, dass nicht die spontane hydrolytische Desaminierung von Cytosin, sondern der Fehleinbau von dUMP während der DNA-Replikation die Hauptquelle für Uracil in der DNA von Säugerzellen darstellt. Da der Uracilmetabolismus ein wichtiges Target in der Chemotherapie ist, lag es nahe, das zur Verfügung stehende ung-knockout-Modell der MEFs zur Untersuchung mit Fluorpyrimidinen, die als Zytostatika verwendet werden, einzusetzen. Da bisher die Ursachen der beobachteten Apoptose der Tumorzellen und aller anderen metabolisch hochaktiven Zellen eines behandelten Organismus noch nicht vollständig verstanden ist, wurden diese Zellen mit verschiedenen Fluorpyrimidinen behandelt, die als Thymidylatsynthasehemmer die de novo Synthese von Thymidin unterbinden. Es konnte gezeigt werden, dass ung-/- Mausfibroblasten, im Gegensatz zu ung+/+ Mausfibroblasten, verstärkt Uracil in der DNA akkumulieren. Obwohl die ung+/+ Mausfibroblasten keine erhöhten Uracil-Spiegel in der DNA aufwiesen, zeigten sie bei Inkubation mit einem der beiden Thymidylatsynthasehemmern, 5-Fluoruracil (5-FU), die gleiche Sensitivität in einem nachfolgenden Proliferationsversuch wie die ung-/- Mausfibroblasten. Dies lässt darauf schließen, dass weder Reparatur noch Einbau von Uracil in die DNA für die beobachtete Toxizität dieser Zytostatika notwendig sind. Ein weiterer Schwerpunkt dieser Arbeit war die Untersuchung des DNA-schädigenden Potenzials endogener ROS, die aus dem Fremdstoffmetabolismus stammen. Dazu wurden V79-Zellen verwendet, die mit dem humanen Enzym Cytochrom 2E1 (CYP2E1) transfiziert wurden (V79 CYP2E1) sowie Zellen, die ebenfalls durch Transfektion das humane Enzym Cytochromreduktase (auch Oxidoreduktase genannt) überexprimieren (V79 hOR). Beide Enzyme sind zusammen an der Hydroxylierung von Fremdstoffen beteiligt, bei der die Reduktion von molekularem Sauerstoff durch Übertragung von zwei Elektronen notwendig ist. Wird anstatt zweier Elektronen in Folge nur eines auf den Sauerstoff übertragen, so führt dieser von der Substratoxygenierung enkoppelte Vorgang zur Bildung von Superoxid. Daher galt es zu klären, ob das so erzeugte Superoxid und daraus gebildete ROS in der Lage sind, die DNA zu schädigen. Es konnte gezeigt werden, dass die Überexpression von CYP2E1 nicht zu einem erhöhten basalen Gleichgewichtsspiegel oxidativer DNA-Schäden führt und die Metabolisierung von Ethanol durch dieses Enzym ebenfalls keine DNA-Modifikationen verursacht. Die Überexpression der Cytochromreduktase hingegen führte gegenüber dem Wildtyp zu einem erhöhten basalen Gleichgewichtsspiegel oxidativer Basenmodifikationen nach Depletion von Glutathion, einem wichtigen zellulären Antioxidans. Im Mikrokerntest, der gentoxische Ereignisse wie Chromosomenbrüche in Zellen aufzeigt, zeigte sich schon ohne Glutathion-Depletion eine doppelt so hohe Mikrokernrate im Vergleich zum Wildtyp. In weiteren Versuchen wurden die V79-hOR-Zellen mit dem chinoiden Redoxcycler Durochinon inkubiert, um zu untersuchen, ob das vermutlich durch die Reduktase vermittelte Redoxcycling über Generierung von ROS in der Lage ist, einen oxidativen DNA-Schaden und Toxizität zu verursachen. Hier zeigte sich, dass die Überexpression der Reduktase Voraussetzung für Toxizität und den beobachteten DNA-Schaden ist. Die Wildtyp-Zellen zeigten weder einen DNA-Schaden noch Zytotoxizität, auch eine zusätzliche Glutathion-Depletion änderte nichts an dem Befund. Die V79-hOR-Zellen hingegen reagierten auf die Inkubation mit Durochinon mit einer konzentrationsabhängigen Zunahme der Einzelstrangbrüche und oxidativen Basenmodifikationen, wobei sich der DNA-Schaden durch vorherige Glutathion-Depletion verdoppeln ließ.

Isolierung und Charakterisierung von Spirochaeten aus dem Termitendarm

Termiten beherbergen in ihrem Darm eine einzigartige Flora aus Bakterien, Archaeen, Flagellaten und Hefen. Diese symbiontische mikrobielle Gemeinschaft ist am Abbau von komplexen organischen Verbindungen beteiligt und ermöglicht es den Termiten schwer abbaubares Material wie Holz als Nahrungsquelle zu nutzen. Spirochaeten, eine Gruppe beweglicher Bakterien die sich durch ihre besondere Morphologie und Art der Fortbewegung von allen anderen Mikroorganismen abgrenzen lassen, gehören zu den häufigsten Bakterien im Termitendarm. Ziel der Arbeit war die Isolierung und Charakterisierung bislang unbekannter Spirochaeten aus Termitendärmen. Aus drei niederen Termitenarten konnten sechs spirochaetale Stämme gewonnen und identifiziert werden. Die Isolate ließen sich anhand der 16S rRNA Gensequenzen den Gattungen Treponema und Spirochaeta zuordnen. Im Gegensatz zu allen bislang charakterisierten Spirochaeten zeigte der Stamm SPN1 aus der Termite Neotermes castaneus eine kokkoide Zellform und war unbeweglich. Der Organismus wurde daher als neue Art, Spirochaeta coccoides sp. nov., beschrieben. Bei allen gewonnenen Isolaten handelt es sich um strikt anaerobe Organismen die verschiedene Mono-, Di- und Oligosaccharide fermentieren. Als wesentliche Stoffwechselprodukte konnten Acetat und Ethanol (sowie Formiat bei einem Stamm) identifiziert werden. Weiterhin konnten bei den untersuchten Stämmen eine Reihe von enzymatischen Aktivitäten nachgewiesen werden, die für den Abbau von Lignocellulose im Termitendarm von Bedeutung sind. Die Untersuchungen deuten darauf hin, dass die Spirochaeten eine wichtige Rolle bei der Fermentation von Abbauprodukten der Lignocellulose im Termitendarm spielen.

La testimonianza come fonte di conoscenza irriducibile

La testimonianza è riconosciuta in epistemologia come una fonte fondamentale di conoscenza. Meno consenso c’è riguardo lo status epistemico delle credenze formate e intrattenute su base testimoniale: la questione è se la testimonianza fornisca di per sé le ragioni per affidarvisi, o se tali ragioni siano riducibili alla giustificazione fornita da percezione, memoria e ragionamento. Il dibattito circa lo status epistemico delle credenze acquisite tramite testimonianza ha dato origine a due linee di pensiero contrapposte: il riduzionismo e l’anti-riduzionismo. Secondo gli antiriduzionisti, che si rifanno al pensiero di Thomas Reid, la testimonianza è una fonte basica di giustificazione, alla pari di percezione, memoria e ragionamento. Ciò significa che il soggetto che riceve testimonianza è giustificato a crederne il contenuto in assenza di defeaters rilevanti. I riduzionisti, che fanno capo al lavoro di David Hume, sostengono al contrario che, oltre all’assenza di defeaters rilevanti, per poter credere giustificatamente il contenuto di una testimonianza il soggetto deve essere in possesso di ragioni positive non-testimoniali. Queste ragioni sono normalmente rintracciate in un’induzione che parte dalla memoria dell’osservazione di una generale conformità tra i fatti e le testimonianze, e conclude che un certo tipo di testimone, di circostanza, di contesto, o di contenuto veicolato sono fonti attendibili di informazioni. La critica principale che viene mossa contro l’antiriduzionismo è che sembra approvare la credulità e l’irresponsabilità epistemica . Mostrerò al contrario che la conoscenza testimoniale non sia riducibile ad alcun tipo di inferenza e che la giustificazione che fornisce è in linea con un resoconto del processo che costituisce testimonianza in termini di norme e di committment. Sosterrò una tesi antiriduzionista basata su un resoconto affidabilista della giustificazione che si spiega nei termini dell’esercizio di abilità epistemiche acquisite entro un ambiente epistemico dove le stesse sono profondamente radicate. Un resoconto dell’asserzione nei termini delle norme da cui è regolata mostrerà che la credenza testimoniale è giustificata in virtù della conoscenza che è presupposta dall’asserzione, che della testimonianza è la forma paradigmatica.

Eine neue Form der Pyruvatkinase in Säugerspermien

Nach Homogenisation ejakulierter Eberspermien und Zentrifugation des Homogenates blieben mehr als 60% der Aktivität des glykolytischen Enzyms Pyruvatkinase (PK) an Zellfragmenten im Sediment gebunden. Diese strukturgebundene PK wurde als PK-S bezeichnet. Das Detergenz Triton X-100 führte nicht zur Ablösung der PK-S; mit Trypsin konnten jedoch rund 80% der PK-S ohne Verlust an Aktivität von den Strukturen gelöst und durch kombinierte Kationenaustausch- und Hydrophobizitätschromatographie gereinigt werden (spezifische Aktivität: 116,7 U/mg Protein). Die lösliche PK aus Eberspermien konnte ebenfalls durch ein ähnliches Verfahren angereichert werden. Im Gel (SDS-PAGE) zeigten die Untereinheiten der PK-S mit 64.400 eine geringfügig größere relative Molekülmasse als die der PK-M1 aus Kaninchenmuskel (62.000). Die kinetischen Eigenschaften der abgelösten PK-S als auch der noch an Spermienstrukturen gebundenen PK-S und der löslichen PK aus Eberspermien waren sehr ähnlich und entsprachen der M1-Isoform der PK. Antikörper gegen Kaninchenmuskel-PK (Anti-PK-M1) reagierten auch mit der löslichen PK und der PK-S aus Eberspermien. Edman-Abbau der ersten 19 Aminosäuren zeigte, dass die tryptisch abgelöste PK-S am N-Terminus um 5 Aminosäuren gegenüber nativer PK-M1 verlängert ist, während der C-Terminus der erhaltenen PK-S-Sequenz mit einem meist nahe dem N-Terminus gelegenen Sequenzabschnitt der PK-M1 und -M2 übereinstimmt. Die N-terminale Verlängerung der nativen PK-S enthält sicherlich mehr als die nach tryptischer Lyse nachgewiesenen 5 Aminosäuren. Vergleiche der Aminosäure- und übersetzten Nukleotidsequenzen sowie die kinetischen Eigenschaften lassen vermuten, dass die PK-S, wie die PK-M1 und PK-M2, vom PKM-Gen codiert wird. Gegen die gereinigte PK-S wurden Antikörper in Kaninchen produziert. Da das Antiserum nicht ausreichend spezifisch für PK-S war, wurden aus ihm affinitätschromatographisch Antikörper (Anti-PK-S) isoliert, die hohe Affinität zu einem synthetisierten PK-S-Peptid (13 N-terminale Aminosäuren der tryptisch abgelösten PK-S) hatten. Dieses Anti-PK-S-Präparat war spezifisch für PK-S; es reagierte weder mit Kaninchenmuskel-PK noch mit löslicher PK oder anderen Proteinen aus Eberspermien. Anti-PK-S und Anti-PK-M1 wurden zur Lokalisierung von PK-S und löslicher PK in Spermien von Eber, Bulle und Mensch sowie in Schnitten von Eberhoden eingesetzt. Mit Anti-PK-S wurden der Bereich des Akrosoms und das lange flagellare Hauptstück sowie der Übergangsbereich zwischen Kopf und Mittelstück von Eberspermien fluoreszenzmarkiert, wogegen das kurze, die Mitochondrien enthaltende Mittelstück des Flagellums und der postakrosomale Kopfbereich nur mit Anti-PK-M1 markiert wurden. Immunogoldmarkierung in elektronenmikroskopischen Bildern bestätigte die Lokalisierung von PK-S im Akrosombereich. Im Hauptstück banden Anti-PK-M1 und Anti-PK-S an die fibröse Scheide. Glyzerinaldehyd-3-phosphat Dehydrogenase (GAPDH) konnte von mir ebenfalls im Akrosombereich, im Übergangsbereich zwischen Kopf und Mittelstück und an der fibrösen Scheide detektiert werden. Auch an Bullen- und Humanspermien konnte über Immunogoldmarkierung PK und vermutlich GAPDH an der fibrösen Scheide gezeigt werden. Im Akrosombereich dieser Spermien waren die Nachweise von PK und GAPDH jedoch nicht sicher. In Eberhodenschnitten war die PK-S erstmals, oder zumindest vermehrt, in den elongierenden Spermatiden über Fluoreszenzmarkierung nachweisbar, während andere, vermutlich somatische PK vermehrt in den früheren Stadien (Spermatogonien, aber auch in den Spermatozyten und runden Spermatiden) auftrat. Für die GAPDH zeigte sich ein ähnlicher Entwicklungsverlauf. Die Ergebnisse zeigen, dass in Eberspermien zwei Isoformen der PK auftreten: eine N-terminal verlängerte, strukturgebundene Form, die PK-S, und eine lösliche Form, die beide der PK-M1 ähneln. Der ungewöhnliche N-Terminus der PK-S dient vermutlich der spezifischen räumlichen Anordnung der PK-S im Akrosombereich und an der fibrösen Scheide, nicht aber der Modulation kinetischer Eigenschaften. Meine Untersuchungen stützen die Hypothese, dass in bestimmten Kompartimenten von Säugerspermien die Glykolyse durch Verankerung einiger ihrer Enzyme strukturell hochgeordnet ist. Dadurch wird vermutlich die Versorgung der Mitochondrien-freien Regionen mit ATP sichergestellt. Man kann diese Organisation als Anpassung des Stoffwechsels von Spermien deuten, bei denen die Mitochondrien in einem kleinen Bereich (Mittelstück) hinter dem Spermienkopf kompartimentiert sind. Im Hauptstück des Flagellums könnte die Glykolyse ATP für die Spermienmotilität liefern, im Akrosombereich für die Verhinderung einer vorzeitigen Akrosomreaktion. Somit käme der strukturierten Glykolyse eine essentielle Bedeutung für die Befruchtungsfähigkeit von Säugerspermien zu.

Progetto ed implementazione di protocolli a basso consumo energetico per reti wireless

"I computer del nuovo millennio saranno sempre più invisibili, o meglio embedded, incorporati agli oggetti, ai mobili, anche al nostro corpo. L'intelligenza elettronica sviluppata su silicio diventerà sempre più diffusa e ubiqua. Sarà come un'orchestra di oggetti interattivi, non invasivi e dalla presenza discreta, ovunque". [Mark Weiser, 1991] La visione dell'ubiquitous computing, prevista da Weiser, è ormai molto vicina alla realtà e anticipa una rivoluzione tecnologica nella quale l'elaborazione di dati ha assunto un ruolo sempre più dominante nella nostra vita quotidiana. La rivoluzione porta non solo a vedere l'elaborazione di dati come un'operazione che si può compiere attraverso un computer desktop, legato quindi ad una postazione fissa, ma soprattutto a considerare l'uso della tecnologia come qualcosa di necessario in ogni occasione, in ogni luogo e la diffusione della miniaturizzazione dei dispositivi elettronici e delle tecnologie di comunicazione wireless ha contribuito notevolmente alla realizzazione di questo scenario. La possibilità di avere a disposizione nei luoghi più impensabili sistemi elettronici di piccole dimensioni e autoalimentati ha contribuito allo sviluppo di nuove applicazioni, tra le quali troviamo le WSN (Wireless Sensor Network), ovvero reti formate da dispositivi in grado di monitorare qualsiasi grandezza naturale misurabile e inviare i dati verso sistemi in grado di elaborare e immagazzinare le informazioni raccolte. La novità introdotta dalle reti WSN è rappresentata dalla possibilità di effettuare monitoraggi con continuità delle più diverse grandezze fisiche, il che ha consentito a questa nuova tecnologia l'accesso ad un mercato che prevede una vastità di scenari indefinita. Osservazioni estese sia nello spazio che nel tempo possono essere inoltre utili per poter ricavare informazioni sull'andamento di fenomeni naturali che, se monitorati saltuariamente, non fornirebbero alcuna informazione interessante. Tra i casi d'interesse più rilevanti si possono evidenziare: - segnalazione di emergenze (terremoti, inondazioni) - monitoraggio di parametri difficilmente accessibili all'uomo (frane, ghiacciai) - smart cities (analisi e controllo di illuminazione pubblica, traffico, inquinamento, contatori gas e luce) - monitoraggio di parametri utili al miglioramento di attività produttive (agricoltura intelligente, monitoraggio consumi) - sorveglianza (controllo accessi ad aree riservate, rilevamento della presenza dell'uomo) Il vantaggio rappresentato da un basso consumo energetico, e di conseguenza un tempo di vita della rete elevato, ha come controparte il non elevato range di copertura wireless, valutato nell'ordine delle decine di metri secondo lo standard IEEE 802.15.4. Il monitoraggio di un'area di grandi dimensioni richiede quindi la disposizione di nodi intermedi aventi le funzioni di un router, il cui compito sarà quello di inoltrare i dati ricevuti verso il coordinatore della rete. Il tempo di vita dei nodi intermedi è di notevole importanza perché, in caso di spegnimento, parte delle informazioni raccolte non raggiungerebbero il coordinatore e quindi non verrebbero immagazzinate e analizzate dall'uomo o dai sistemi di controllo. Lo scopo di questa trattazione è la creazione di un protocollo di comunicazione che preveda meccanismi di routing orientati alla ricerca del massimo tempo di vita della rete. Nel capitolo 1 vengono introdotte le WSN descrivendo caratteristiche generali, applicazioni, struttura della rete e architettura hardware richiesta. Nel capitolo 2 viene illustrato l'ambiente di sviluppo del progetto, analizzando le piattaforme hardware, firmware e software sulle quali ci appoggeremo per realizzare il progetto. Verranno descritti anche alcuni strumenti utili per effettuare la programmazione e il debug della rete. Nel capitolo 3 si descrivono i requisiti di progetto e si realizza una mappatura dell'architettura finale. Nel capitolo 4 si sviluppa il protocollo di routing, analizzando i consumi e motivando le scelte progettuali. Nel capitolo 5 vengono presentate le interfacce grafiche utilizzate utili per l'analisi dei dati. Nel capitolo 6 vengono esposti i risultati sperimentali dell'implementazione fissando come obiettivo il massimo lifetime della rete.