Die Anwendung des 3-2-1 Modells didaktischer Elemente in der Hochschulpraxis

Im Verlauf einer universitätsweiten Förderinitiative wurde für die Lehrveranstaltung Betonbau ein Projekt durchgeführt, das mithilfe Neuer Medien versucht, die Lehre an der Hochschule nachhaltig zu verbessern. In dieser Veröffentlichung wird über die Entwicklung von interaktiven Lernobjekten (ILO) berichtet, die streng nach den Gesichtspunkten des 3-2-1 Modells didaktischer Elemente nach Kerres (2001) aufgebaut wurden. Die Umsetzung, sowohl in technischer als auch didaktischer Hinsicht, sowie die Implementierung im Curriculum wird detailliert beschrieben. Eine Diskussion über eine mögliche Effizienzsteigerung in der Lehre rundet diese Veröffentlichung ab.(DIPF/Orig.)

[3 + 2]-Cycloadditions of nitrile ylides after photoactivion of vinyl azides under flow conditions

The photodenitrogenation of vinyl azides to 2H-azirines by using a photoflow reactor is reported and compared with thermal formation of 2H-azirines. Photochemically, the ring of the 2H-azirines was opened to yield the nitrile ylides, which underwent a [3 + 2]-cycloaddition with 1,3-dipolarophiles. When diisopropyl azodicarboxylate serves as the dipolarophile, 1,3,4-triazoles become directly accessible starting from the corresponding vinyl azide. © 2013 Cludius-Brandt et al.

Análisis y diseño de un molino de bolas de 3.2 TN de 25 HP para reducción de tamaño de 75 a 100 micras

Para diseñar un molino de bolas que trabaje continuamente de manera satisfactoria, se requiere ser analizado por deformación y esfuerzos, en el que, se determinan los valores de mayor magnitud, localización y dirección de lo que se denomina esfuerzos y deformaciones principales. Se analiza el comportamiento de los esfuerzos en cada uno de los componentes a diseñar a través de la teoría de fallas de la energía de la distorsión, esfuerzos de trabajo para comportamiento elástico. Para evaluar los resultados de comportamiento mecánico en estas componentes del molino, se consideran propuestas de material y de geometría de las diferentes partes que lo componen, y desarrollando un programa de análisis y diseño a través de Excel se determina el análisis de esfuerzos en los puntos críticos de las posibles áreas a la falla, la geometría más apropiada para cada una de las componentes, los materiales a utilizar y los factores de seguridad que permiten establecer el trabajo satisfactorio década una de ellas. Además de realizar la selección de las componentes y estimar una cotización de la máquina.

2 D game ediror on-line : A edição de videojogos em contexto web

Descreve-se, no presente trabalho, os esforços envidados no sentido de criar uma solução informática generalista, para os problemas mais recorrentes do processo de produção de videojogos 20, baseados em sprites, a correr em plataformas móveis. O sistema desenvolvido é uma aplicação web que está inserida no paradigma cloud­computing, usufruindo, portanto, de todas as vantagens em termos de acessibilidade, segurança da informação e manutenção que este paradigma oferece actualmente. Além das questões funcionais, a aplicação é ainda explorada do ponto de vista da arquitetura da implementação, com vista a garantir um sistema com implementação escalável, adaptável e de fácil manutenção. Propõe-se ainda um algoritmo que foi desenvolvido para resolver o problema de obter uma distribuição espacial otimizada de várias áreas retangulares, sem sobreposições nem restrições a nível das dimensões, quer do arranjo final, quer das áreas arranjadas. ABSTRACT: This document describes the efforts taken to create a generic computing solution for the most recurrent problems found in the production of two dimensional, sprite­based videogames, running on mobile platforms. The developed system is a web application that fits within the scope of the recent cloud-computing paradigm and, therefore, enjoys all of its advantages in terms of data safety, accessibility and application maintainability. In addition, to the functional issues, the system is also studied in terms of its internal software architecture, since it was planned and implemented in the perspective of attaining an easy to maintain application, that is both scalable and adaptable. Furthermore, it is also proposed an algorithm that aims to find an optimized solution to the space distribution problem of several rectangular areas, with no overlapping and no dimensinal restrictions, neither on the final arrangement nor on the arranged areas.

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Spectral Splitting of Purely Magnetic Schrödinger Operator in 2-d

La tesi ripercorre i procedimenti utilizzati per il calcolo dell'asintotica dello splitting dell'operatore puramente magnetico di Schrödinger nel limite semiclassico (con campo magnetico costante) in un dominio aperto limitato e semplicemente connesso il cui bordo ha simmetria assiale ed esattamente due punti di curvatura massima non degeneri. Il punto di partenza è trovare stime a priori sulle sue autofunzioni, che permettono di dire che sono localizzate esponenzialmente vicino al bordo del dominio in oggetto, grazie a queste stime di riesce a modificare l'operatore in maniera tale che l'asintotica dello splitting rimanga equivalente. Si passa in seguito a coordinate tubulari, quindi si rettifica il borso del dominio, andando però a complicare il potenziale magnetico. Si ottengono nuove stime a priori per le autofunzioni. A questo punto si considera lo stesso operatore differenziale ma su un dominio modificato, in cui viene eliminato uno dei punti di curvatura massima. Per tale operatore si ha uno sviluppo asintotico delle autofunzioni (anche dette soluzioni WKB). Si utilizzano poi strumenti di calcolo pseudo-differenziale per studiare l'operatore nel nuovo dominio, ne si localizza la fase per renderlo limitato ed ottenere così una parametrice (anch'essa limitata) avente un simbolo esplicito. Se ne deducono stime di tipo ellittico che possono essere portate all'operatore senza la fase localizzata aggiungendo dei termini di errore. Grazie queste stime si riesce ad approssimare lo splitting (controllando sempre l'errore) che volevamo calcolare (quello dell'operatore sul dominio con due punti di curvatura massima) tramite le autofunzioni dell'operatore sul dominio con un solo punto di curvatura massima, e per queste autofunzioni abbiamo lo sviluppo asintotico (WKB). Considerando l'ordine principale di questi sviluppi si riesce a calcolare esplicitamente il termine dominante dello splitting, ottenendone così l'asintotica nel limite semiclassico.

Sequence-specific arrest of primer extension on single-stranded DNA by an oligonucleotide-minor groove binder conjugate.

A minor groove binder (MGB) derivative (N-3-carbamoyl-1,2-dihydro-3H-pyrrolo[3,2-e]indole-7-carboxylate tripeptide; CDPI3) was covalently linked to the 5' or 3' end of several oligodeoxyribonucleotides (ODNs) totally complementary or possessing a single mismatch to M13mp19 single-stranded DNA. Absorption thermal denaturation and slot-blot hybridization studies showed that conjugation of CDPI3 to these ODNs increased both the specificity and the strength with which they hybridized. Primer extension of the same phage DNA by a modified form of phage T7 DNA polymerase (Sequenase) was physically blocked when a complementary 16-mer with a conjugated 5'-CDPI3 moiety was hybridized to a downstream site. Approximately 50% of the replicating complexes were arrested when the blocking ODN was equimolar to the phage DNA. Inhibition was unaffected by 3'-capping of the ODN with a hexanol group or by elimination of a preannealing step. Blockage was abolished when a single mismatch was introduced into the ODN or when the MGB was either removed or replaced by a 5'-acridine group. A 16-mer with a 3'-CDPI3 moiety failed to arrest primer extension, as did an unmodified 32-mer. We attribute the exceptional stability of hybrids formed by ODNs conjugated to a CDPI3 to the tethered tripeptide binding in the minor groove of the hybrid. When that group is linked to the 5' end of a hybridized ODN, it probably blocks DNA synthesis by inhibiting strand displacement. These ODNs conjugated to CDPI3 offer attractive features as diagnostic probes and antigene agents.

JSONYA/FN: Functional Computation in JSON

Functional programming has a lot to offer to the developers of global Internet-centric applications, but is often applicable only to a small part of the system or requires major architectural changes. The data model used for functional computation is often simply considered a consequence of the chosen programming style, although inappropriate choice of such model can make integration with imperative parts much harder. In this paper we do the opposite: we start from a data model based on JSON and then derive the functional approach from it. We outline the identified principles and present Jsonya/fn — a low-level functional language that is defined in and operates with the selected data model. We use several Jsonya/fn implementations and the architecture of a recently developed application to show that our approach can improve interoperability and can achieve additional reuse of representations and operations at relatively low cost. ACM Computing Classification System (1998): D.3.2, D.3.4.

D-3 2002-2 Dependent Adult Abuse Report, July-December 2002

Adult dependent abuse report from the Iowa Department of Human Services

D-3 2000-2 Dependent Adult Abuse Report, July-December 2000

Adult dependent abuse report from the Iowa Department of Human Services

D-3 2001-2 Dependent Adult Abuse Report, July-December 2001

Adult dependent abuse report from the Iowa Department of Human Services

D-3 2003-2 Dependent Adult Abuse Report, July-December 2003

Adult dependent abuse report from the Iowa Department of Human Services

D-3 2005-2 Dependent Adult Abuse Report, July-December 2005

D-3 Dependent Adult Abuse Report

D-3 2004-2 Dependent Adult Abuse Report, July - December 2004

Dependent adult abuse report

Traité d'anatomie humaine. Tome 3,Fascicule 2 / par MM. A. Charpy,... A. Nicolas,... A Prenant,... [et al.] ; publié sous la direction de Paul Poirier

Comprend : Les lymphatiques... Étude spéciale des lymphatiques des différentes parties du corps ; Système nerveux... Nerfs crâniens ; Les organes des sens. Le tégument externe et ses dérivés ; Oreille interne...