Utilização de parâmetros qualitativos dos resíduos aterrados como referência no processo de seleção de valores empregados em modelos matemáticos para a estimativa de geração de metano

The study of mathematical modeling assists in evaluation of the capacity of production and measurement of generation time of biogas in landfills, enabling the implantation of projects of energy generation from methane. Thus, the work aims, by simulating scenarios of potential methane generation in the landfill in Rio Claro, the use of field data from methane flow and waste grounded parameters as references for selecting values of k e L0 used to estimate methane generation model in LandGEM. As a result it was found that compared the characteristics adopted in the four scenarios recommended by the USEPA literature with those found in the landfill of Rio Claro (high amount of organic matter in the waste landed and daily practice of leachate recirculation), the scenario that apparently better represent the rate of methane generation is the scenario 01, with k = 0.7 and L0 = 96. Now, the adjustment of parameters in relation to the data field of methane flow, the value of L0 which best fits the methane generation from the landfill in Rio Claro is 150, while for k the line behavior that best represents the reality are values between 0.7 and 0.3. Regarding the parameters of the waste grounded, between the suggested values of k, 0,3 is most consistent with the intermediate level of biological degradation of the residue grounded, while L0 due to the biodegradability of the waste, a new value between 120 and 150 may be more appropriate for the study

Diagnóstico dos resíduos de construção e demolição: uma contribuição à elaboração e implantação da gestão integrada dos RCD no município de Guaratinguetá – SP

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Diagnóstico dos resíduos de construção e demolição para elaboração e implantação da gestão integrada dos RCD no município de Guanambi – BA

Taking as starting the environmental, social and economic impact of construction and demolition waste in Brazilian cities were created legal mechanisms for management and administration, seeking to minimize the impacts to the maximum, since the irregular deposition can be characterized as environmental crime. CONAMA Resolution No. 307 of 2002 establishing the mandatory implementation of an Integrated Management System Construction Waste and Demolition, guiding the classification and designation of the waste generating agents, collection agents and transporters, and the areas of culling and disposal of waste. The technical partnership between the Ministry of Cities, the Environment Ministry and the Caixa Econômica Federal, coordinated by Pinto & Gonzales (2005) Management in the work and management of construction waste, proposed a guidance manual to guide the implementation of a System Integrated Management of Construction Waste in Municipalities. The municipality of Guanambi in the state of Bahia, in full economic rise, lacks a waste management of construction and demolition, since there has areas for the disposal of waste being proposed in this paper the diagnosis of waste generation in the municipality as part of the methodology proposed by the work of Pinto & Gonzales (2005).

Mapeamento de áreas susceptíveis para implantação de aterro sanitário no município de Rio Claro, SP

The inadequate disposal of municipal waste is one of the biggest environmental problems. The lack of long public politics makes this problem a challenge to their administrators. Finding a place for the disposal of waste is an easy task and the present work looks forward to a better understanding about the concepts involved in order to choose favorable areas for the development of sanitary landfills, minimizing environmental impacts. In this line of thought several areas in Rio Claro`s region were evaluated according to the environmental terms. The areas which were classified as good or almost good will have a more elaborated study such as field works, evaluation and understanding of the concepts analyzed so that there aren’t any waste of money, work, social and environmental waste in the area. These areas were analyzed according to secondary data such as geological and pedological formation and primary studies such as the assumption of the reality as showed in the map will be made in order to acquire better results.

Potencial de aproveitamento de agregados reciclados de resíduos da construção e demolição

CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving

Diagnóstico dos resíduos gerados nas oficinas mecânicas de veículos automotivos do município de São Carlos-SP

The mechanical garages do varied types to activities related to the reparation from vehicles such as change from Motor oil, change and cleaning from car pieces, motor rectification, among others. These activities generate different kinds of waste and wastewater that when disposed in an inappropriate way can pollute the environmentand cause risks to the public health. Despite the environmental issues that involves these enterprises, they aren´t object of environmental licensing and there are any rules that regularizes their activities with the goal of these possible environmental impacts mitigation. The environmental diagnosis proposed by the present work has as goal the knowledge of the possible environmental aspects and their effects in the environment, for establishing control measures and from that to generate subsidy for environmental normatization of the sector in the municipal level. Furthermore, it should also define practices as waste production reduction, separation of them at the generator source and convenient final disposal, as well as wastewater production reduction and treatment of them before its launching in the wastewater network. The environmental diagnosis was based on a survey realized in garages from the city of São Carlos – SP, in order to define the more important characteristics of this activity that are related to the environment and public health. From the obtained information from the survey and the interpretation of the data, subsidy for the municipal environment management of the mechanical garages were generated.

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Avaliação da viabilidade econômica da implantação de uma usina de triagem e compostagem na cidade de Rio Claro-SP

The question of the solid waste is without a doubt one of the biggest problems faced for the world-wide population in the present time, resulting in the call “collapse of the garbage”. In this direction that appears the composting, in the scope of the treatment of organic waste origin, that in Brazil, approximately correspond 50% of the generated volume. However, the rare plants of selection and composting (UTC) existing at least do not obtain auto-to support themselves, increasing to each day the number of deactivations, almost always related the financial questions. In this direction, the present research brings the analysis of the economic viability of the implantation of a UTC for the city of Rio Claro-SP, relating it with the thick organic composition sales, for the cultures of vegetables cultivated in a ray of 30 km of the study area. For in such a way, they had been carried through, calculations concerning the regional demand for organic composition, and the verification of the implantation costs and operation of the plant. The reached results had been the flow of box for the first year of functioning of the UTC, as well as the break-even point between the gotten expenditures and prescriptions. From this relation investment profitability, it was verified that the UTC is presented impracticable under the economic point of view.

Aplicação da logística reversa como solução para gestão dos resíduos eletrônicos

The present study aimed to analyze how develops the reverse logistics process applied in electrical and electronic products. Such analysis was obtained through literature search and with the completion of a case study, which was developed at the company's Oxil Reverse Manufacture, showing the advantages obtained as well as the difficulties faced in the implementation of the reverse logistics process. The development of this research shows its importance in so far as the residues generated by electronic components, which are one of the most harmful to the environment and harmful to human health, highly possessing heavy metals and non-biodegradable materials in their composition. In this way, the components collected from this activity, should be properly recycled, reused and finally housed in suitable location, these steps that are part of the reverse logistics process

Desafios ambientais na indústria automobiliística: uma análise do processo de reciclagem e reutilização de materiais

This research has as main objective the analysis of the auto industry has done to reduce disposal of solid waste in its production process as much as to facilitate the recycling of cars after they complete their life cycle. Despite the auto industry is not one of the most polluting in terms of its production process, it produces a good that is causing major pollution. In despite of the great current concern in seeking to reduce the emissions of pollutants by vehicles, as important as the quest for cleaner fuels is the study of how to dispose of old cars. Even if the car production does not increase significantly each year in relative terms, we must consider the fleet of used cars that still circulates in the world. Ending the mammoth “cemeteries” of automobiles, however, it is not so easy, even because the car is composed of various materials, which in many cases are not easily separable. In addition to an overview, the research seeks to examine the possible advances in Brazil related to the process of auto recycling

Plano de gerenciamento sustentável dos resíduos de construção civil. O caso de Rio Claro (SP)

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

Política de Saúde em Comunidade Indígena na Metrópole Paulista

A existência de índios em cidades como São Paulo, Campo Grande, Manaus, Belém, dentre outras, cada vez se torna mais evidente, com implicações que provocam dificuldades sociais, econômicas, saúde dentre outros agravantes. Em função desta realidade, os órgãos públicos envolvidos na Política Nacional Indígena do Brasil reconhecem esta população como índios urbanos. É o que ocorre com as comunidades existentes na região metropolitana de São Paulo. Reconhece-se a existência de quatro aldeias indígenas, três delas é Tupi-Guarani e a outra é da etnia Pankararu. O presente trabalho surgiu da discussão das dificuldades de sobrevivência das comunidades indígenas da região metropolitana de São Paulo e da resolução de seus problemas de saúde. Para esta reflexão, foi preciso inserir o tema numa análise mais ampla da Política Nacional de Saúde Indígena como parte integrante da Política Nacional de Saúde brasileira. A partir dos questionamentos tecidos e discutidos temos como objetivo principal a saúde coletiva da população indígena no traçar de seu perfil epidemiológico e demográfico e a caracterização de sua vivência cotidiana e condição de saúde do índio urbano. Tomamos como procedimento metodológico o uso de fontes orais, uma que é capaz de traduzir com uma maior confiabilidade o cotidiano dos indivíduos e de sua comunidade... (Resumo completo, clicar acesso eletrônico abaixo)

Aplicação de coagulantes naturais no tratamento de lixiviado de resíduos urbanos

With the constant increase in the municipal solid waste (MSW) generation, mainly due to the high consumption patterns, it becomes difficult to manage correctly the solid waste and thus minimize their impact on the environment. One of the most problems of the large amount of waste generated is the liquid originated from physical, chemical and biological decomposition process of organic wastes, with dark color and bad smell, called leachate: it can reach the soil, polluting the groundwater and the surface water. Therefore, this study aimed to investigate the process of coagulation/flocculation/sedimentation applied in the treatment of the leachate generated in the not controlled landfill of Presidente Prudente, Sao Paulo... (Complete abstract click electronic access below)

Diagnóstico Ambiental da Cidade de Presidente Bernardes - SP

The new modes of production imposed by capitalism and its relentless pursuit of development triggered several impacts on the natural environment and thereby the quality of life of society. These impacts become more visible when we look the urban place. For the identification and proposal of solutions is necessary to carry out an environmental diagnosis to have knowledge of the real situation of a given area. The Presidente Bernardes city is located in West of the São Paulo State, and even being a small city has many problems resulting of the unplanned urban growth. Thus, the present work intends to conduct an environmental diagnosis of the city Presidente Bernardes-SP, through the analysis of water supply systems, sewage treatment, collection and disposal of solid waste and green areas in the urban area and if required, indicate plausible alternatives to solve any problems

Uso de composto de poda de árvore e lodo de esgoto como substratos na formação de mudas de sangra d'água (Croton urucurana Baill.) irrigadas com três lâminas de água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV