A broadband leptonic model for gamma-ray emitting microquasars

Observational and theoretical studies point to microquasars (MQs) as possible counterparts of a significant fraction of the unidentified gamma-ray sources detected so far. At present, a proper scenario to explain the emission beyond soft X-rays from these objects is not known, nor what the precise connection is between the radio and the high-energy radiation. We develop a new model where the MQ jet is dynamically dominated by cold protons and radiatively dominated by relativistic leptons. The matter content and power of the jet are both related with the accretion process. The magnetic field is assumed to be close to equipartition, although it is attached to and dominated by the jet matter. For the relativistic particles in the jet, their maximum energy depends on both the acceleration efficiency and the energy losses. The model takes into account the interaction of the relativistic jet particles with the magnetic field and all the photon and matter fields. Such interaction produces significant amounts of radiation from radio to very high energies through synchrotron, relativistic Bremsstrahlung, and inverse Compton (IC) processes. Variability of the emission produced by changes in the accretion process (e.g. via orbital eccentricity) is also expected. The effects of the gamma-ray absorption by the external photon fields on the gamma-ray spectrum have been taken into account, revealing clear spectral features that might be observed. This model is consistent to the accretion scenario, energy conservation laws, and current observational knowledge, and can provide deeper physical information of the source when tested against multiwavelength data.

Self-reported sitting time and physical activity: interactive associations with mental well-being and productivity in office employees

Abstract Background: Little is known about how sitting time, alone or in combination with markers of physical activity (PA), influences mental well-being and work productivity. Given the need to develop workplace PA interventions that target employees’ health related efficiency outcomes; this study examined the associations between self-reported sitting time, PA, mental well-being and work productivity in office employees. Methods: Descriptive cross-sectional study. Spanish university office employees (n = 557) completed a survey measuring socio-demographics, total and domain specific (work and travel) self-reported sitting time, PA (International Physical Activity Questionnaire short version), mental well-being (Warwick-Edinburg Mental Well-Being Scale) and work productivity (Work Limitations Questionnaire). Multivariate linear regression analyses determined associations between the main variables adjusted for gender, age, body mass index and occupation. PA levels (low, moderate and high) were introduced into the model to examine interactive associations. Results: Higher volumes of PA were related to higher mental well-being, work productivity and spending less time sitting at work, throughout the working day and travelling during the week, including the weekends (p < 0.05). Greater levels of sitting during weekends was associated with lower mental well-being (p < 0.05). Similarly, more sitting while travelling at weekends was linked to lower work productivity (p < 0.05). In highly active employees, higher sitting times on work days and occupational sitting were associated with decreased mental well-being (p < 0.05). Higher sitting times while travelling on weekend days was also linked to lower work productivity in the highly active (p < 0.05). No significant associations were observed in low active employees. Conclusions: Employees’ PA levels exerts different influences on the associations between sitting time, mental well-being and work productivity. The specific associations and the broad sweep of evidence in the current study suggest that workplace PA strategies to improve the mental well-being and productivity of all employees should focus on reducing sitting time alongside efforts to increase PA.

Model for interevent times with long tails and multifractality in human communications: An application to financial trading

Social, technological, and economic time series are divided by events which are usually assumed to be random, albeit with some hierarchical structure. It is well known that the interevent statistics observed in these contexts differs from the Poissonian profile by being long-tailed distributed with resting and active periods interwoven. Understanding mechanisms generating consistent statistics has therefore become a central issue. The approach we present is taken from the continuous-time random-walk formalism and represents an analytical alternative to models of nontrivial priority that have been recently proposed. Our analysis also goes one step further by looking at the multifractal structure of the interevent times of human decisions. We here analyze the intertransaction time intervals of several financial markets. We observe that empirical data describe a subtle multifractal behavior. Our model explains this structure by taking the pausing-time density in the form of a superstatistics where the integral kernel quantifies the heterogeneous nature of the executed tasks. A stretched exponential kernel provides a multifractal profile valid for a certain limited range. A suggested heuristic analytical profile is capable of covering a broader region.

Physical attributes of a pasture soil in southeast Goiás determined by geostatistics

ABSTRACT This study aimed to evaluate the spatial dependence of physical attributes in a soil cultivated with Brachiaria grass. A 12-m regular sampling grid was established within an area of 3.500 m2. Thirty-five soil samples were collected at 0-30 cm depth for particle density, bulk density, texture and total porosity analysis. These data were evaluated using statistical methods of indicator kriging and the GS+ software. The GS+ software was used to develop three-dimensional maps and evaluate semivariograms. The spatial dependence was evaluated using experimental semivariograms. The analyzed attributes indicated the occurrence of spatial dependence when fit to the exponential model. Areas with higher porosity occurred in the regions with lower bulk densities and higher particle densities.

Multibody Simulation Model of the Roller Test Rig

Multibody simulation model of the roller test rig is presented in this work. The roller test rig consists of a paper machine’s tube roll supported with a hard bearing type balancing machine. The simulation model includes non-idealities that are measured from the physical structure. These non-idealities are the shell thickness variation of the roll and roundness errors of the shafts of the roll. These kinds of non-idealities are harmful since they can cause subharmonic resonances of the rotor system. In this case, the natural vibration mode of the rotor is excited when the rotation speed is a fraction of the natural frequency of the system. With the simulation model, the half critical resonance is studied in detail and a sensitivity analysis is performed by simulating several analyses with slightly different input parameters. The model is verified by comparing the simulation results with those obtained by measuring the real structure. Comparison shows that good accuracy is achieved, since equivalent responses are achieved within the error limit of the input parameters.

A temperature predicting model for manufacturing processes requiring coiling

A model for predicting temperature evolution for automatic controling systems in manufacturing processes requiring the coiling of bars in the transfer table is presented. Although the method is of a general nature, the presentation in this work refers to the manufacturing of steel plates in hot rolling mills. The predicting strategy is based on a mathematical model of the evolution of temperature in a coiling and uncoiling bar and is presented in the form of a parabolic partial differential equation for a shape changing domain. The mathematical model is solved numerically by a space discretization via geometrically adaptive finite elements which accomodate the change in shape of the domain, using a computationally novel treatment of the resulting thermal contact problem due to coiling. Time is discretized according to a Crank-Nicolson scheme. Since the actual physical process takes less time than the time required by the process controlling computer to solve the full mathematical model, a special predictive device was developed, in the form of a set of least squares polynomials, based on the off-line numerical solution of the mathematical model.

Particle model for simulating limestone reactions in novel fluidised bed energy applications

The development of carbon capture and storage (CCS) has raised interest towards novel fluidised bed (FB) energy applications. In these applications, limestone can be utilized for S02 and/or CO2 capture. The conditions in the new applications differ from the traditional atmospheric and pressurised circulating fluidised bed (CFB) combustion conditions in which the limestone is successfully used for SO2 capture. In this work, a detailed physical single particle model with a description of the mass and energy transfer inside the particle for limestone was developed. The novelty of this model was to take into account the simultaneous reactions, changing conditions, and the effect of advection. Especially, the capability to study the cyclic behaviour of limestone on both sides of the calcination-carbonation equilibrium curve is important in the novel conditions. The significances of including advection or assuming diffusion control were studied in calcination. Especially, the effect of advection in calcination reaction in the novel combustion atmosphere was shown. The model was tested against experimental data; sulphur capture was studied in a laboratory reactor in different fluidised bed conditions. Different Conversion levels and sulphation patterns were examined in different atmospheres for one limestone type. The Conversion curves were well predicted with the model, and the mechanisms leading to the Conversion patterns were explained with the model simulations. In this work, it was also evaluated whether the transient environment has an effect on the limestone behaviour compared to the averaged conditions and in which conditions the effect is the largest. The difference between the averaged and transient conditions was notable only in the conditions which were close to the calcination-carbonation equilibrium curve. The results of this study suggest that the development of a simplified particle model requires a proper understanding of physical and chemical processes taking place in the particle during the reactions. The results of the study will be required when analysing complex limestone reaction phenomena or when developing the description of limestone behaviour in comprehensive 3D process models. In order to transfer the experimental observations to furnace conditions, the relevant mechanisms that take place need to be understood before the important ones can be selected for 3D process model. This study revealed the sulphur capture behaviour under transient oxy-fuel conditions, which is important when the oxy-fuel CFB process and process model are developed.

Scientific creativity and diversity of physical work environment: framework development

The aim of this research was to develop a framework to analyze how physical environment influences scientific creativity. Due to the relative novelty of this topic, there is still a gap in the unified method to study connection between physical environment and creativity. Therefore, in order to study this issue deeply, the qualitative method was used (interviews and qualitative questionnaire). Scientists (PhD students and senior researchers) of Graduate School of Management were interviewed to build the model and one expert interview was conducted to assess its validity. The model highlights several dimensions via which physical environment can influence scientific creativity: Comfort, Instruments and Diversity. Comfort and Instruments are considered to be related mostly to productivity, an initial requirement for creativity, while Diversity is the factor responsible for supporting all the stages of scientific creative process. Thus, creative physical environment is not one place by its nature, but an aggregative phenomenon. Due to two levels of analysis, the model is named the two-level model of creative physical environment.

Physical exercise prevents motor disorders and striatal oxidative imbalance after cerebral ischemia-reperfusion

Stroke is the third most common cause of death worldwide, and most stroke survivors present some functional impairment. We assessed the striatal oxidative balance and motor alterations resulting from stroke in a rat model to investigate the neuroprotective role of physical exercise. Forty male Wistar rats were assigned to 4 groups: a) control, b) ischemia, c) physical exercise, and d) physical exercise and ischemia. Physical exercise was conducted using a treadmill for 8 weeks. Ischemia-reperfusion surgery involved transient bilateral occlusion of the common carotid arteries for 30 min. Neuromotor performance (open-field and rotarod performance tests) and pain sensitivity were evaluated beginning at 24 h after the surgery. Rats were euthanized and the corpora striata was removed for assay of reactive oxygen species, lipoperoxidation activity, and antioxidant markers. Ischemia-reperfusion caused changes in motor activity. The ischemia-induced alterations observed in the open-field test were fully reversed, and those observed in the rotarod test were partially reversed, by physical exercise. Pain sensitivity was similar among all groups. Levels of reactive oxygen species and lipoperoxidation increased after ischemia; physical exercise decreased reactive oxygen species levels. None of the treatments altered the levels of antioxidant markers. In summary, ischemia-reperfusion resulted in motor impairment and altered striatal oxidative balance in this animal model, but those changes were moderated by physical exercise.

Power Consumption Measurement and Scenario Based Energy Model in Wearable Computing Applications

The power is still today an issue in wearable computing applications. The aim of the present paper is to raise awareness of the power consumption of wearable computing devices in specific scenarios to be able in the future to design energy efficient wireless sensors for context recognition in wearable computing applications. The approach is based on a hardware study. The objective of this paper is to analyze and compare the total power consumption of three representative wearable computing devices in realistic scenarios such as Display, Speaker, Camera and microphone, Transfer by Wi-Fi, Monitoring outdoor physical activity and Pedometer. A scenario based energy model is also developed. The Samsung Galaxy Nexus I9250 smartphone, the Vuzix M100 Smart Glasses and the SimValley Smartwatch AW-420.RX are the three devices representative of their form factors. The power consumption is measured using PowerTutor, an android energy profiler application with logging option and using unknown parameters so it is adjusted with the USB meter. The result shows that the screen size is the main parameter influencing the power consumption. The power consumption for an identical scenario varies depending on the wearable devices meaning that others components, parameters or processes might impact on the power consumption and further study is needed to explain these variations. This paper also shows that different inputs (touchscreen is more efficient than buttons controls) and outputs (speaker sensor is more efficient than display sensor) impact the energy consumption in different way. This paper gives recommendations to reduce the energy consumption in healthcare wearable computing application using the energy model.

Automated static image analysis as a novel tool in describing the physical properties of dietary fiber

Abstract The growing interest in the usage of dietary fiber in food has caused the need to provide precise tools for describing its physical properties. This research examined two dietary fibers from oats and beets, respectively, in variable particle sizes. The application of automated static image analysis for describing the hydration properties and particle size distribution of dietary fiber was analyzed. Conventional tests for water holding capacity (WHC) were conducted. The particles were measured at two points: dry and after water soaking. The most significant water holding capacity (7.00 g water/g solid) was achieved by the smaller sized oat fiber. Conversely, the water holding capacity was highest (4.20 g water/g solid) in larger sized beet fiber. There was evidence for water absorption increasing with a decrease in particle size in regards to the same fiber source. Very strong correlations were drawn between particle shape parameters, such as fiber length, straightness, width and hydration properties measured conventionally. The regression analysis provided the opportunity to estimate whether the automated static image analysis method could be an efficient tool in describing the hydration properties of dietary fiber. The application of the method was validated using mathematical model which was verified in comparison to conventional WHC measurement results.

Implementing the OPTIMAL model : the impact on students' motivation in an elementary school games environment

Optimal challenge occurs when an individual perceives the challenge of the task to be equaled or matched by his or her own skill level (Csikszentmihalyi, 1990). The purpose of this study was to test the impact of the OPTIMAL model on physical education students' motivation and perceptions of optimal challenge across four games categories (i. e. target, batting/fielding, net/wall, invasion). Enjoyment, competence, student goal orientation and activity level were examined in relation to the OPTIMAL model. A total of 22 (17 M; 5 F) students and their parents provided informed consent to take part in the study and were taught four OPTIMAL lessons and four non-OPTIMAL lessons ranging across the four different games categories by their own teacher. All students completed the Task and Ego in Sport Questionnaire (TEOSQ; Duda & Whitehead, 1998), the Intrinsic Motivation Inventory (IMI; McAuley, Duncan, & Tanmien, 1987) and the Children's Perception of Optimal Challenge Instrument (CPOCI; Mandigo, 2001). Sixteen students (two each lesson) were observed by using the System for Observing Fitness Instruction Time tool (SOFTT; McKenzie, 2002). As well, they participated in a structured interview which took place after each lesson was completed. Quantitative results concluded that no overall significant difference was found in motivational outcomes when comparing OPTIMAL and non-OPTIMAL lessons. However, when the lessons were broken down into games categories, significant differences emerged. Levels of perceived competence were found to be higher in non-OPTIMAL batting/fielding lessons compared to OPTIMAL lessons, whereas levels of enjoyment and perceived competence were found to be higher in OPTIMAL invasion lessons in comparison to non-OPTIMAL invasion lessons. Qualitative results revealed significance in feehngs of skill/challenge balance, enjoyment and competence in the OPTIMAL lessons. Moreover, a significance of practically twice the active movement time percentage was found in OPTIMAL lessons in comparison to non-OPTIMAL lessons.

Overcoming victim behaviour through physical education

This study presents infonnation gathered during personal interviews in which participants were asked how they, as physical educators, might possibly assist the victim of bullying through their programs. The research is a qualitative study, using an inductive approach. Five participants were chosen, based on convenience sampling, with semi-structured interviews which were audio recorded. The theoretical research found that the most stable characteristics of victimized boys were lack of strength and lack of physical fitness. This suggested that Physical Education class might be the best place in which to empower victimized students to reduce their own victimization by addressing these areas of strength and fitness. From the interviews it became clear that, while these educators showed a willingness to help bullying victims through their programs, their adherence to a Physical Education model based primarily on elitism, as opposed to individual fitness, would make it difficult for them to do so effectively.

Physical access for persons with disabilities

For persons with disabilities, the activities that able-bodied people take for granted can be major, often insurmountable challenges. Attempting to enter a restaurant for lunch with friends can result in lengthy and adversarial litigation if the facility is not accessible to a person with a disability or other mobility impairment. This litigation would be initiated after the individual was effectively refused service; a refusal based on hislher personal physical characteristics. If a shopping mall is not equipped with "access amenities", then the disabled person may be excluded from shopping there and thus exercising consumer freedom. If workplaces are not equipped to accommodate the access needs of persons with disabilities, then those people are effectively barred from gainful employment there. If a municipal goveniment building is inaccessible to disabled persons, then they may be excluded from participating in council meetings. These are all activities that the majority of the population enjoys as a matter of course, in that they represent the functions of a free citizen in a free society. If a person is excluded from such activities because of some personal characteristic, then that person is subjected to differential or discr~minatory treatment. The guarantees provided in Canadian feden! and provincial rights legislation, are such that people are not to be discriminated againsL Where buildings and facilities othen\iise open to the public are not accessible for persens with disabilities, then those people are being discriminated against. To challenge these discriminatory practices, individuals initiate complaints through the administrative justice system. To address the extent to which this is a problem, many sources were consulted. Constitutional lawyers, tribunal members, advocates for the disabled and land use planners were interviewed. Case law and legislation were reviewed. Literature on citizenship theory, dispute resolution and dispute avoidance was compiled and assessed. And, the field of land use planning was analyzed (drawing on the WTiter's educational and experiential background) as a possible alternative method for effecting systemic access for persons with disabilities. The conclusion of this study is that there does exist a proactive method for assuring access, a method that can apply the systemic remedy needed to deal with this problem. The current method, which is an adversarial and piecemeal complaint process, has proven ineffective in remedying this discrimination problem~ Failure to provide an appropriate remedy means that persons with disabilities will not enjoy the degree of citizen status enjoyed by the able-bodied. This is the current circumstance, and since equity is the aim of rights legislation, and since such legislative and administrative frameworks have failed in that purpose, then an alternative method is necessary. An alternative model is the one in which land use planning is based. It has conflict avoidance and conflict minimization as underpinnings. And, most importantly, land use planning is already a proyen method of combatting discrimination.

The physical environment and organizational behavior

Research into organizational behaviour has indicated that there is an inevitable conflict between the needs of the individual and organizational demands. Psychologists have given insights into basic individual needs and contend that satisfaction of these needs constitutes a motivating force which enhances desired behavioural patterns. Behaviouralists have suggested that a basic and pervasive individual need is the culturally determined need for privacy. Anthropologists and environmental psychologists have shown that man's spatial behaviour is observable and predictable and that changes in the physical environment or the way it is perceived are accompanied by concommitant changes in behaviour. Research findings from each of the disciplines have been reviewed in an attempt to show that the physical environment is a significant factor in satisfying the needs of the individual organizational member, hence, a significant influence on organizational behaviour. A model has been generated to show the relationship between the physical setting and behaviour and to underscore the importance of making provisions within the physical setting for the attainment of a culturally determined optimal level of privacy. The physical setting, by providing for this need, becomes a significant factor in reducing the conflict between the individual and the organization and makes for acceptable role behaviour and the fulfilment of organizational goals.