Tree Fruit (peach) Nursery - Report done for the University of Guelph

A report done by Donald Ziraldo on the topic of Tree Fruit, specifically peach, in nurseries. The report was likely done while he was a student of the University of Guelph in the 1970s.

Photograph - Percy Band standing by a tree

A photograph of Percy Band wearing a suit as he stands in front of a large tree. A house can be seen just behind the tree.

Photograph - Woman Standing by a Large Tree Trunk

A woman wearing a hat and holding a small purse. She is standing next to a large tree trunk and there are benches behind her.

Key for the Oak Chest

The key is 4 1/2 cm long and is attached to a gold cord ending in a burnt orange tassel.

Oak Chest

Oak chest measuring 36 cm in height 45 cm in width and 32 cm in depth. The cabinet contains 5 graduating drawers and it closes with 2 hinged doors, each bearing an arch. There are recessed brass handles on the 2 sides of the cabinet and one of these handles on each of the drawers. On the top of the cabinet there is an escutcheon engraved with “S.D. Woodruff Esq., St. Catharines, 157 Ontario”. The cabinet has a lock which is still functional and opens with a skeleton key which is part of this collection. The top 2 drawers have been lined with a piece of cardboard carefully cut to size and covered with brocade. There is some scratching on the top of the cabinet and one of the front doors is missing some of the wooden trim.

Receipt from A. Cutler and Son for oak chairs in leather

Receipt from A. Cutler and Son for oak chairs in leather, Aug. 29, 1887.

Receipt from A. Cutler and Son, Buffalo, New York for oak chairs in leather and bookcase, Sept. 19, 1887

Receipt from A. Cutler and Son, Buffalo, New York for oak chairs in leather and bookcase, Sept. 19, 1887.

The tree of knowledge ; a document by a woman

UANL

Consequence modelling,vulnerability assessment and fuzzy fault tree analysis of hazardous storages in an industrial area

The hazards associated with major accident hazard (MAH) industries are fire, explosion and toxic gas releases. Of these, toxic gas release is the worst as it has the potential to cause extensive fatalities. Qualitative and quantitative hazard analyses are essential for the identitication and quantification of the hazards associated with chemical industries. This research work presents the results of a consequence analysis carried out to assess the damage potential of the hazardous material storages in an industrial area of central Kerala, India. A survey carried out in the major accident hazard (MAH) units in the industrial belt revealed that the major hazardous chemicals stored by the various industrial units are ammonia, chlorine, benzene, naphtha, cyclohexane, cyclohexanone and LPG. The damage potential of the above chemicals is assessed using consequence modelling. Modelling of pool fires for naphtha, cyclohexane, cyclohexanone, benzene and ammonia are carried out using TNO model. Vapor cloud explosion (VCE) modelling of LPG, cyclohexane and benzene are carried out using TNT equivalent model. Boiling liquid expanding vapor explosion (BLEVE) modelling of LPG is also carried out. Dispersion modelling of toxic chemicals like chlorine, ammonia and benzene is carried out using the ALOHA air quality model. Threat zones for different hazardous storages are estimated based on the consequence modelling. The distance covered by the threat zone was found to be maximum for chlorine release from a chlor-alkali industry located in the area. The results of consequence modelling are useful for the estimation of individual risk and societal risk in the above industrial area.Vulnerability assessment is carried out using probit functions for toxic, thermal and pressure loads. Individual and societal risks are also estimated at different locations. Mapping of threat zones due to different incident outcome cases from different MAH industries is done with the help of Are GIS.Fault Tree Analysis (FTA) is an established technique for hazard evaluation. This technique has the advantage of being both qualitative and quantitative, if the probabilities and frequencies of the basic events are known. However it is often difficult to estimate precisely the failure probability of the components due to insufficient data or vague characteristics of the basic event. It has been reported that availability of the failure probability data pertaining to local conditions is surprisingly limited in India. This thesis outlines the generation of failure probability values of the basic events that lead to the release of chlorine from the storage and filling facility of a major chlor-alkali industry located in the area using expert elicitation and proven fuzzy logic. Sensitivity analysis has been done to evaluate the percentage contribution of each basic event that could lead to chlorine release. Two dimensional fuzzy fault tree analysis (TDFFTA) has been proposed for balancing the hesitation factor invo1ved in expert elicitation .

Studies on seed pathology and seedling diseases of some important indigenous tree species of kerala

In forestry, availability of healthy seeds is an important factor in raising planting stock. Initial seed health and storage conditions are the major factors governing the germinability of seeds. Like seeds of agricultural and horticultural crops, forest tree seeds are also liable to be affected by micro-organisms during storage, which affects the germination, and reduces the viability. Further introduction of seed-borne diseases into newly sown crops/areas on account of using unhealthy seeds is also not ruled out. Availability of healthy stock of seedlings is intrinsic for raising plantations and to meet this requirement elimination of nursery diseases by appropriate chemicals is of prime imortance. As exotic tree species may become susceptible to various native pathogens, it is generally considered better to select indigenous tree species for large scale plantations as they are well adapted to local environment. However, before taking up large scale afforestation progranme involving any indigenous tree species, it is essential to have knowledge about seed disorders and seedling diseases and their management. with a View to select appropriate tree species with fewer seed disorders and seedling disease problems for use in further plantation programme, four indigenous tree species such as Albizia odoratissima (L.f) Benth., Lagerstroemia microcazpa Wt., Pterocazpus marsupiwn Roxb. and Xylia xylocarpa (Roxb.) Taub. were evaluated to meet the above parameters

A Novel Decision Tree Algorithm for Numeric Datasets - C 4.5*Stat

Decision trees are very powerful tools for classification in data mining tasks that involves different types of attributes. When coming to handling numeric data sets, usually they are converted first to categorical types and then classified using information gain concepts. Information gain is a very popular and useful concept which tells you, whether any benefit occurs after splitting with a given attribute as far as information content is concerned. But this process is computationally intensive for large data sets. Also popular decision tree algorithms like ID3 cannot handle numeric data sets. This paper proposes statistical variance as an alternative to information gain as well as statistical mean to split attributes in completely numerical data sets. The new algorithm has been proved to be competent with respect to its information gain counterpart C4.5 and competent with many existing decision tree algorithms against the standard UCI benchmarking datasets using the ANOVA test in statistics. The specific advantages of this proposed new algorithm are that it avoids the computational overhead of information gain computation for large data sets with many attributes, as well as it avoids the conversion to categorical data from huge numeric data sets which also is a time consuming task. So as a summary, huge numeric datasets can be directly submitted to this algorithm without any attribute mappings or information gain computations. It also blends the two closely related fields statistics and data mining

Prediction of Learning Disabilities in School Age Children using SVM and Decision Tree

This paper highlights the prediction of Learning Disabilities (LD) in school-age children using two classification methods, Support Vector Machine (SVM) and Decision Tree (DT), with an emphasis on applications of data mining. About 10% of children enrolled in school have a learning disability. Learning disability prediction in school age children is a very complicated task because it tends to be identified in elementary school where there is no one sign to be identified. By using any of the two classification methods, SVM and DT, we can easily and accurately predict LD in any child. Also, we can determine the merits and demerits of these two classifiers and the best one can be selected for the use in the relevant field. In this study, Sequential Minimal Optimization (SMO) algorithm is used in performing SVM and J48 algorithm is used in constructing decision trees.

Spechte als ökologische Indikatoren in Natur- und Wirtschaftswäldern im Bialowiera-Wald (Ostpolen)

Die vorliegende Untersuchung analysiert die Eignung der "Spechtgemeinschaft" als ökologische Indikatorengruppe und formuliert vor dem Hintergrund der Ergebnisse Forderungen und Empfehlungen für einen "spechtgerechten" Umgang mit Wäldern. Die Habitatnutzung von sieben Spechtarten beim Nahrungserwerb wurde über einen Zeitraum von zwei Jahren in urwaldartigen und forstlich genutzten Beständen verschiedener Waldgesellschaften systematisch beobachtet. Das Untersuchungsgebiet ist der Bialowieza-Wald im äußersten Osten Polens, wo in enger räumlicher Nachbarschaft Natur- und Wirtschaftswaldflächen bearbeitet werden konnten. Die Beobachtungen erfolgten zwischen Anfang März 1999 und Ende Februar 2001 und wurden zu allen Jahreszeiten durchgeführt. Vier der insgesamt sechs Probeflächen repräsentieren die wichtigste Laubwaldgesellschaft des Gebietes, das Tilio-Carpinetum, die übrigen zwei die wichtigste Nadelwaldgesellschaft, das Peucedano-Pinetum. Die Hälfte der zwischen 42 und 54 ha großen Probeflächen lag im streng geschützten Urwaldreservat des Bialowieza-Nationalparkes, die übrigen in forstlich genutzten Waldbeständen. Zusätzlich wurde ein 2,5 km langes Transekt durch bewirtschafteten Erlen-Eschen-Auenwald und sehr naturnahen Erlenbruch bearbeitet. Die Probeflächen wurden in ein Raster aus 50x50m großen Quadranten unterteilt. Zur Beobachtung der Spechte beim Nahrungserwerb erfolgten 21 Begehungen je Probefläche bzw. Transekt. Die Probeflächen wurden dazu auf parallelen Linien mit Abständen von je 100m begangen, Startpunkt und Startrichtung wurden variiert. Zur Charakterisierung der Vegetation und Bestandesstruktur erfolgten Erhebungen zur Baumartenzusammensetzung, Größenklassenverteilung der Bäume, Totholzanteil und Krautvegetation. 1332 Beobachtungen von Spechten beim Nahrungserwerb konnten ausgewertet werden. Der Buntspecht wurde in allen Flächen am häufigsten gesehen. Mittel-, Weißrücken- und Kleinspecht wurden überwiegend in den Tilio-Carpineten beobachtet, in den Naturwäldern häufiger als in den bewirtschafteten Beständen. Der Dreizehenspecht wurde im Nadelwald und stärker mit Fichten durchmischtem Laubwald angetroffen. Bei Schwarz- und Grauspecht konnte keine klare Vorliebe für bestimmte Waldgesellschaften ermittelt werden. Der Buntspecht ernährte sich vor allem im Herbst und Winter überwiegend von fetthaltigen Samen und wurde dann meist beim Bearbeiten von Fichten- oder Kiefernzapfen in Schmieden beobachtet. Der Mittelspecht suchte als "Sammelspecht" seine Nahrung vor allem an den Oberflächen der Stämme und Äste. Klein-, Weißrücken-, Dreizehen- und Schwarzspecht traten als Hackspechte in Erscheinung. Die wenigen Daten zum Grauspecht reichen nicht zur Ermittlung der bevorzugten Nahrungserwerbstechnik aus. Bei Bunt-, Mittel- und Weißrückenspecht konnte eine deutliche Vorliebe für die Stieleiche als Nahrungsbaum nachgewiesen werden. Der Dreizehenspecht ist jedoch die einzige der beobachteten Arten mit einer weitgehenden Spezialisierung auf eine bestimmte Baumart, er nutzte in allen Waldgesellschaften meist die Fichte. Insgesamt bevorzugten die Spechte Bäume mit großen Stammdurchmessern, beim Kleinspecht ist diese Vorliebe allerdings nur schwach ausgeprägt. Totholz wurde von Weißrücken-, Dreizehen- und Kleinspecht bei der Nahrungssuche bevorzugt, vom Mittelspecht jedoch nur gelegentlich genutzt. Beim Buntspecht zeigte der Totholz-Nutzungsanteil erhebliche Unterschiede zwischen verschiedenen Baumarten. Liegendes Totholz spielte in den Tilio-Carpineten im Vergleich zu stehendem Totholz und toten Teilen lebender Bäume nur eine geringe Rolle für Nahrung suchende Spechte.

Bud development, flowering and fruit set of Moringa oleifera Lam. (Horseradish Tree) as affected by various irrigation levels

Moringa oleifera is becoming increasingly popular as an industrial crop due to its multitude of useful attributes as water purifier, nutritional supplement and biofuel feedstock. Given its tolerance to sub-optimal growing conditions, most of the current and anticipated cultivation areas are in medium to low rainfall areas. This study aimed to assess the effect of various irrigation levels on floral initiation, flowering and fruit set. Three treatments namely, a 900 mm (900IT), 600 mm (600IT) and 300 mm (300IT) per annum irrigation treatment were administered through drip irrigation, simulating three total annual rainfall amounts. Individual inflorescences from each treatment were tagged during floral initiation and monitored throughout until fruit set. Flower bud initiation was highest at the 300IT and lowest at the 900IT for two consecutive growing seasons. Fruit set on the other hand, decreased with the decrease in irrigation treatment. Floral abortion, reduced pollen viability as well as moisture stress in the style were contributing factors to the reduction in fruiting/yield observed at the 300IT. Moderate water stress prior to floral initiation could stimulate flower initiation, however, this should be followed by sufficient irrigation to ensure good pollination, fruit set and yield.

Alley cropping of willows and grassland for bioenergy provision: productivity, tree-crop interactions and energy balance

The demand for biomass for bioenergy has increased rapidly in industrialized countries in the recent years. Biogenic energy carriers are known to reduce CO2 emissions. However, the resource-inefficient production of biomass often caused negative impacts on the environment, e.g. biodiversity losses, nitrate leaching, and erosion. The detrimental effects evolved mainly from annual crops. Therefore, the aim of modern bioenergy cropping systems is to combine yield stability and environmental benefits by the establishment of mixed-cropping systems. A particular emphasis is on perennial crops which are perceived as environmentally superior to annual crops. Agroforestry systems represent such mixed perennial cropping systems and consist of a mix of trees and arable crops or grassland within the same area of land. Agroforestry practices vary across the globe and alley cropping is a type of agroforestry system which is well adapted to the temperate zone, with a high degree of mechanization. Trees are planted in rows and crops are planted in the alleyways, which facilitates their management by machinery. This study was conducted to examine a young alley cropping system of willows and two grassland mixtures for bioenergy provision under temperate climate conditions. The first part of the thesis identified possible competition effects between willows and the two grassland mixtures. Since light seemed to be the factor most affecting the yield performance of the understory in temperate agroforestry systems, a biennial in situ artificial shade experiment was established over a separate clover-grass stand to quantify the effects of shade. Data to possible below- and aboveground interactions among willows and the two grassland mixtures and their effects on productivity, sward composition, and quality were monitored along a tree-grassland interface within the alleys. In the second part, productivity of the alley cropping system was examined on a triennial time frame and compared to separate grassland and willow stands as controls. Three different conversion technologies (combustion of hay, integrated generation of solid fuel and biogas from biomass, whole crop digestion) were applied to grassland biomass as feedstock and analyzed for its energetic potential. The energetic potential of willow wood chips was calculated by applying combustion as conversion technique. Net energy balances of separate grassland stands, agroforestry and pure willow stands evaluated their energy efficiency. Results of the biennial artificial shade experiment showed that severe shade (80 % light reduction) halved grassland productivity on average compared to a non-shaded control. White clover as heliophilous plant responded sensitively to limited radiation and its dry matter contribution in the sward decreased with increasing shade, whereas non-leguminous forbs (mainly segetal species) benefited. Changes in nutritive quality could not be confirmed by this experiment. Through the study on interactions within the alleys of the young agroforestry system it was possible to outline changes of incident light, soil temperature and sward composition of clover-grass along the tree-grassland interface. Nearly no effects of trees on precipitation, soil moisture and understory productivity occurred along the interface during the biennial experiment. Considering the results of the productivity and the net energy yield alley cropping system had lower than pure grassland stands, irrespective of the grassland seed mixture or fertilization, but was higher than that for pure willow stands. The comparison of three different energetic conversion techniques for the grassland biomass showed highest net energy yields for hay combustion, whereas the integrated generation of solid fuel and biogas from biomass (IFBB) and whole crop digestion performed similarly. However, due to the low fuel quality of hay, its direct combustion cannot be recommended as a viable conversion technique, whereas IFBB fuels were of a similar quality to wood chip from willow.