Análise da viabilidade de motorização elétrica do soprador no ciclo regenerativo da unidade de craqueamento catalítico fluidizado em uma refinaria

One of the biggest environmental problems of today is the climate change. Experts affirm that this global warming is related to the greenhouse effect. Its causes are directly related to human activity, especially the use of fossil fuels. In this context, companies around the world are challenged to improve energy efficiency in order to reduce the environmental impact and work toward the so-called tripod of sustainable development that focuses on the social, economic and environmental aspects of a business strategy. The first step a company can make in this regard is to conduct an inventory of emissions of greenhouse gases (GHGs). The reduction of GHG emissions in a refinery can be achieved by replacing steam turbines with electric motors to drive big machines, this reduction is achieved by relieving the steam consumption for electric power available or purchased. An important aspect associated with the reduction of GHG emissions is the best performance of the Energy Intensity Index (ERI). The objective of this study was to analyze the feasibility of the blower motorization in the regenerative cycle of a fluidized catalytic cracking unit at a specific refinery. For development work, two methods were used, the initial screening and optimization scenarios with the help of software Butyl. The results indicate that after a certain cost of natural gas this substitution becomes favorable. In addition, there is a large reduction of CO2 emissions avoided by burning fuel

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Redução de consumo de energia eletrica a partir de reaproveitamento de energia termica com uso de ciclo rankine orgânico

This paper is proposed the usage of an Organic Rankine Cycle (ORC) along with waste heat recovery from an inconstant heat source. This method of waste heat recovery with intermittent heat source is part of a technical viability study. This paper also brings up the usage of thermal energy storage as heat source for the ORC. This paper is based on a heat treatment company study in which a natural gas furnace is explored. Data such as mass flow, temperature and specific waste gas heat from this furnace are used through calculations. Calculations are made also based on furnace cycles. This viability study considers a series of working fluids such as ammonia, benzene, R113 and R134a. Results point out that ORC with out thermal storage and using refrigerant fluid ammonia is the best alternative

Caracterização da sensibilidade ambiental da Baixada Santista no estado de São Paulo

This study aimed to perform the analysis and characterization of environmental sensitivity to oil from Baixada Santista in the State of São Paulo. The work was done by integrating data of physical environmet, socio-economic activities and the biological / ecological provided by the Research Group on Environmental Sensitivity to Oil Spill in the Institute of Geosciences and Exact Sciences of UNESP “Julio de Mesquita Filho” wich works in the conjunction with the Program of Human Resources Training in Geosciences and Environmental Sciences Applied to the Oil and Gas (PRH-05) of the National Petroleum Agency (ANP). Were also performed descriptive statistical analysis, based on dispersion and trend parameters, which allowed to answer questions related to environmental sensitivity index (ISL) prevalence, the predominance of the ISL by environment and the predominance of the environments of the area, thus providing an overview of Baixada Santista’s main towns about sensitivity to oil. Analyses performed in this study may also help mitigate the environmental and socioeconomic impacts and contribute to contingency plans development for Baixada Santista

Estudo do comportamento em fadiga de um tubo de aço API 5CT soldado por resistência elétrica

The oil extraction in deep waters sparked new areas of knowledge, the creation of engineering courses dedicated just to these processes and a wide field of analysisvoiding multiple impacts in case of faults, mainly the economic and environmental. This paper aims to show on the effects and causes of fatigue failure in steel tubes used for oil and gastransportation (linepipe), mainly caused by vortex induced vibrations, or VIV. To make this, through laboratory tests, it found trough the curve Stress versus Number of Cycles, and thus estimating that with a stress value of 350 MPa or less, the fatigue life cycle of the API 5CT T95 (1% Cr) pipe is estimated infinite. It could conclude that the analyzed material has good fatigue failure resistance for offshore use, taking into account only the influence of VIV's, since there are no stress concentrators

Cultura em excesso?: uma investigação dos dispêndios com cultura nos municípios fluminenses

A monografia apresenta um breve panorama dos aspectos econômicos do Estado do Rio de Janeiro com o intuito de destacar o papel da indústria do petróleo na economia do mesmo, assim como as rendas provenientes dos pagamentos de royalties e participações especiais aos municípios produtores. O fato é que enormes recursos são entregues a esses municípios, o que torna extremamente importante a investigação da qualidade da alocação destes. Ambiciona-se por meio deste trabalho a análise das despesas culturais dos municípios fluminenses com o propósito de identificar se as cidades que mais recebem royalties gastam relativamente mais nesta área comparado a outras. Este exame é relevante, principalmente pela dificuldade de definição do conceito de cultura e por as contas culturais municipais não serem auditadas pelos Tribunais de Contas, o que favoreceria um possível canal de desvio de verbas públicas

Simulação de ciclo combinado utilizando software comercial

In Brazil, The power generation has always depended on the rivers, in other words, there are moments that the power generation can vary, which can cause variations in energy supply and even blackout according to the level of water in the reservoirs of the hydroelectric plants. For this reason, many options has been studied, like our example, which is about a combined cycle power plant in Canas. The use of combined cycle is interesting from the point o view of energy, because its efficiency is between 50 and 60%, and from the point of view of environment, because it can burn natural gas, which is cleaner than coal, it reduces the emission of gases that influence on the greenhouse effect. This work aims to perform a technical analysis of a case study of a power plant proposed to be built in Canas by the AES/AES Tietê Group. For the analysis will be used the commercial software GateCycle 6.0.0 from GE, this software has the power of simulating power generation cycles (nuclear, combined, etc.). The energy department of UNESP has the license, which makes possible the academic use of this tool. Two combined cycles were simulated, one using one pressure level HRSG, and another one closer to the real power plant, which is a combined cycle with a three pressure level HRSG. The results were close to expected, for the combined cycle with one pressure HRSG the power was 513,9 MW and a efficiency of 53,27%, in the case with the three pressure level HRSG the power was 517,1 MW and a efficiency of 53,5%. We conclude that the software requires that the user must have the knowledge about the subjects involved in the use of GateCycle in problems resolutions

Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work

Práticas de gestão da melhoria contínua e aprendizado e suas contribuições para a capacidade de inovação na indústria de construção naval do Brasil

After years of stagnation, the naval construction industry in Brazil has been experiencing a period of recovery caused by investments in the oil and gas sector and the implementation of governmental programs that aimed to regenerate it. However, efforts in learning and innovations are needed in order to reinsert the country in this activity and achieve international levels of competitiveness. Based on literature about learning processes and continuous improvement practices and their impact in the innovative and productive processes, this paper aims to identify the main tendencies, mechanisms and procedures to improve the construction and management processes in the Brazilian naval construction industry. The methodology used for the data analysis classifies obtained information from magazines and annals of congresses of the sector, according to the established analysis categories (phenomena). Such categories study information related to the productive and technological processes of the industry, the main internal and external relations of the industrial park, the management of resources and processes, policies, investments, etc. The data was collected in the period 2004-2010, and more than 500 registers that show a dominance of the investment phenomenon, especially in the increase of productive capacity, were catalogued. In addition to this, there is evidence of modernization in the manufacturing plan and the equipment, diverse forms of cooperation, implementation of human resources management practices and engineering or processes and products. Hence, a process of catching up governs and is guided by modernization and increase training in this industry.

Thermodynamic, Economic and Emissions Analysis of a Micro Gas Turbine Cogeneration System operating on Biofuels

Pós-graduação em Engenharia Mecânica - FEG

Aplicação de um modelo numérico na otimização de fornos alimentícios usando o OpenFOAM®

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diesel e biodiesel de murumuru e de soja: desempenho operacional de trator agrícola no preparo do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização geoelétrica de arenitos asfálticos da Formação Pirambóia, Bacia do Paraná

Os combustíveis fósseis respondem por cerca de 90% da matriz energética global, e apesar de ser consenso a necessidade de expansão da mesma e da redução do consumo de bens e energia em nossa cultura, esta mudança caminha a passos muito lentos, e a pesquisa relacionada aos recursos de combustíveis fósseis, inclusive o desenvolvimento de tecnologias que nos permitam explorar economicamente reservas antes inviáveis, ainda é extremamente necessária. As reservas mundiais de petróleo mais acessíveis ou economicamente viáveis, devido à sua extensão ou qualidade do óleo, têm sua vida útil contada e acumulações não convencionais tem sido exploradas. Os arenitos asfálticos da Formação Pirambóia, na borda leste da Bacia do Paraná, foram a acumulação de hidrocarbonetos escolhida para experimentar novos meios de investigação a serem usados na indústria de petróleo, aproveitando-se de métodos geofísicos com aplicações usuais em outras áreas da ciência, como geologia ambiental e geotecnia, testando sua potencialidade na identificação de áreas com presença de hidrocarbonetos. O objetivo do trabalho foi identificar um comportamento elétrico em uma camada de arenito impregnado por betume distinguível do comportamento elétrico das camadas de arenito adjacentes, que não contém betume, estabelecendo assim uma assinatura geofísica associável à presença de hidrocarbonetos. Os métodos utilizados (Eletrorresistividade, Polarização Induzida e Eletromagnético Indutivo) mostraram o comportamento dos arenitos asfálticos em função de seus parâmetros físicos elétricos (resistividade, condutividade e cargabilidade) e possibilitaram a identificação e o mapeamento da camada asfáltica, em meio à camadas não impregnadas por betume, conforme pretendido. A boa correlação entre os perfis gerados após o processamento dos dados obtidos em campo e a geometria da camada observada em afloramento indica que os métodos geoelétricos podem constituir uma ferramenta de análise na pesquisa de hidrocarbonetos em bacias sedimentares continentais, possibilitando um diagnóstico inicial da presença de hidrocarbonetos em áreas pré definidas, com métodos não destrutivos, não poluentes e, comparativamente aos métodos convencionais utilizados na indústria de petróleo e gás, mais baratos e rápidos.

Mejora de la movilidad urbana sostenible en el municipio de Madrid : aplicación del análisis geoespacial en la ampliación de la red de suministro de combustibles alternativos.

Este Trabajo Fin de Grado trata de dar respuesta a un problema de movilidad sostenible en el municipio de Madrid. Mediante las herramientas de análisis geoespacial de los Sistemas de Información Geográfica (SIG) se buscan soluciones para la ampliación de la red de estaciones de suministro de combustibles alternativos como el Gas Licuado de Petróleo (GLP), Gas Natural Comprimido (GNC) y electricidad. Los resultados obtenidos determinan las posibles ubicaciones de los nuevos puntos atendiendo a criterios específicos según el tipo de combustible. Estas soluciones procuran que se alcancen las medidas impuestas por las directivas europeas en la materia de las Smart Cities. Además, con este Trabajo se muestran las capacidades de gestión de los SIG en el ámbito urbano y sus posibles aplicaciones. ABSTRACT: This Final Project answers the problem of sustainable mobility in the city of Madrid. By means of geospatial analysis tools of Geographic Information Systems (GIS) solutions are searched to extend the supply stations network for alternative fuels like Liquefied Petroleum Gas (LPG), Compressed Natural Gas (CNG) and electricity. The final results are the best possible locations of new items according to specific criteria depending on the type of fuel. These solutions seek to the measures imposed by the European directives are reached in the field of Smart Cities. In addition, This Final Project shows management capabilities of GIS in urban areas and their possible application.

Valoración de los indicios de gas no convencional en la cuenca del Guadiato

El “shale gas” es un gas no convencional que actualmente se está considerando como una fuente de energía primaria en el momento en que las reservas del petróleo y gas natural convencionales se agoten, razón por la que muchos países están interesados. No obstante, el procedimiento de extracción es complejo y conlleva muchos riesgos de contaminación. En este Proyecto Fin de Carrera se hace un estudio de las posibilidades de extracción en el futuro de “shale gas” o “shale oil” en la Cuenca del Guadiato. Para ello se evaluó el contenido de materia orgánica, el tipo y la madurez en muestras de la serie estratigráfica tipo del Carbonífero. Únicamente 3 niveles presentaban materia orgánica madura, que tendrían escaso potencial para extraer gas, descartándose la extracción de “shale oil”.