Late Cretaceous volcaniclastic rocks at DSDP Holes 74-525A and 74-528

Volcaniclastic rocks of Late Cretaceous age occur in four out of five sites (525, 527, 528, 529) drilled on the crest and the northwest flank of the Walvis Ridge during Leg 74. They are mostly interlayered with and overlie basement in the lowermost 10-100 m of the sedimentary section. Rocks from Holes 525A and 528 were studied megascopically and microscopically, by XRD, and XRF chemical analyses of whole-rock major and trace elements were undertaken. The dominant rock of Hole 528 volcaniclastics is a fine-grained (silt to fine sand), mostly matrix-bearing (partly matrix-rich) vitric "tuff," occurring as 5-110 cm thick, partly graded layers, some of which are distinctly bedded. Volcaniclastics of Hole 525A are generally richer in sanidine crystals. Most rocks contain some nonvolcanic clasts, chiefly foraminifers and lesser amounts of shallow-water fossil debris. Scoria shards, clasts of tachylite, and fine-grained basalts as well as chemical analyses suggest a basaltic to intermediate composition for most rocks of Hole 528, whereas volcaniclastics of Hole 525A are more silicic. The occurrence of tachylite and epiclastic, coarse-grained, basaltic clasts throughout the volcaniclastic sequence at Site 528 indicates shallow-water eruptions and perhaps even ocean island volcanism. The minor occurrence in Hole 528 of trachytic? pumice shards with phenocrysts of K-feldspar and the abundance of such shards in rocks from Hole 525A indicate Plinian eruptions characteristic of more mature stages of ocean island evolution. The sedimentary structures of volcaniclastic layers and their occurrence within deep sea calcareous oozes indicate a mass flow origin. Diagenetic alteration of the volcaniclastic rocks is pronounced, and four major stages of glass shard alteration are distinguished. Despite the effects of alteration and small-scale redistribution of elements and the admixture of nonvolcanic components, there were no drastic changes in the chemical composition of the rocks, except for pronounced increases in K and Rb and decreases in Ca and Fe. The basaltic volcaniclastic rocks very much resemble basement basalts in that they are moderately evolved tholeiites derived from an LIL-enriched mantle source with Zr/Nb ratios (Hole 528) of 5 to 6. This, in conjunction with the interbedding of volcaniclastic rocks and basement lavas, indicates contemporaneous seamount or island and basement volcanic activity involving magmas derived from similar sources.

Composition of sediments from the north-west African continental margin

Entlang dreier Profile vom NW-afrikanischen Kontinentalrand wurden Oberflächensedimente aus Wassertiefen zwischen 39m und 1514m auf ihre Zusammensetzung der Sandfraktion, auf ihre Gehalte an Karbonat und organischer Substanzen sowie auf ihre mineralogische Zusammensetzung hin untersucht. 1) Die auf dem Schelf und dem oberen Hang abgelagerten Sedimente (<500m) zeichnen sich durch hohe Sandgehalte (>70%) und durch hohe Grob/Fein-Verhältnisse aus. Unterhalb dieses Bereiches nimmt der Einfluß von Strömungen, die die Ablagerung von wesentlichen Mengen an Feinmaterial oberhalb 500m verhindern, ab, wie die starke Abnahme des Sandgehaltes, des Quarz/Glimmer und des Grob/Fein-Verhältnisses zeigen. Die Sedimente aus diesen Wassertiefen werden zum großen Teil aus Partikeln der Siltfraktion aufgebaut. Mit zunehmender Tiefe ist auch eine Zunahme der Tonfraktion zu beobachten, wobei höhere Tonanteile (>10%) erst in Tiefen unterhalb von 1200m auftreten. 2) Die quantitative Komponentenanalyse der Sandfraktion zeigt, daß der karbonatische Anteil fast ausschließlich biogener Herkunft ist. Er besteht zum wesentlichen Teil aus planktonischen Komponenten, vorwiegend Foraminiferen und mengenmäßig nur sehr untergeordnet auftretenden Pteropoden. Das opalkieselige Plankton (Diatomeen, Radiolarien) ist nur in geringen Mengen in den untersuchten Proben vorhanden. Auch das Benthos stellt nur eine untergeordnete Komponente der Sandfraktion dar. Vor allem der Anteil von Foraminiferen und Mollusken nimmt mit zunehmender Wassertiefe relativ deutlich ab. Die übrigen benthonischen Komponenten sind im Sediment nur in geringen Anteilen vertreten. 3) Hauptsedimentbildner im Profil Nouakchott sind die nichtbiogenen, terrigen-detritischen Sandkomponenten. Sie bestehen vorwiegend aus Quarz und mit zunehmender Wassertiefe aus Kotpillen bzw. Kotpillenaggregaten. Je nach Tiefe treten vor allem Glimmer (>1000m) und Glaukonit (<800m) hinzu. Die restlichen Komponenten treten nur gelegentlich und in äußerst geringen Mengen im rezenten Oberflächensediment auf. 4) Quarz wird als Windstaub mit dem NE-Passat und vor allem durch den "Harmattan" aus der Sahara heraustransportiert und vorwiegend über dem Schelfbereich sedimentiert. Windstaubmaterial besteht primär weitgehend aus Siltkorngrößen, die vor Nouakchott über die Schelfkante hinaustransportiert werden und zu einer Grobsiltanreicherung am mittleren Hang führen. 5) Das Verhältnis zwischen den karbonatischen Biogenkomponenten und den nichtbiogenen Partikeln spiegelt sich deutlich in der Karbonatverteilung sowohl des Gesamtsedimentes als auch der Sandfraktion wider. Relativ hohe Karbonatgehalte vor Cap Leven im Norden stehen sehr geringen Anteilen von Nouakchott gegenüber. Mit zunehmender Wassertiefe ist eine deutliche Abnahme des Karbonatanteils zu verfolgen. 6) Die Tatsache, daß das Profil Cap Blanc im Bereich des ganzjährigen Auftriebs liegt, spiegelt sich nicht in der Zusammensetzung der Sandfraktion wider. Südlich der Zone des ganzjährigen Auftriebs weisen verschiedene Parameter (Radiolarien, Diatomeen, Verhältnis von Radiolarien zu planktonischen Foraminiferen, Benthos/Plankton-Verhältnis der Foraminiferen) trotz abnehmender Auftriebsintensität eher steigende Werte auf. Dies ist wesentlich auf eine infolge des Nährstoffeintrages durch Flußzufuhr bedingte Verschiebung der maximalen Primärproduktion weit in südliche Richtung zurückzuführen. 7) In den aufgeführten Parametern zeigen sich von Profil zu Profil sehr deutliche fazielle Unterschiede, obwohl der großklimatische Hintergrund im gesamten Untersuchungsgebiet etwa gleich ist. Vor Cap Leven bildet sich eine Fazies, die im wesentlichen aus planktonischen Foraminiferen besteht, während das Sediment vor Nouakchott zum überwiegenden Teil aus nichtbiogenen Komponenten aufgebaut wird. Im Übergangsbereich vor Cap Blanc bildet sich eine Mischfazies, die keinerlei Prägung durch das Auftriebsgeschehen erhält. Die Ursachen dieser faziellen Unterschiede werden auf fehlenden Terrigeneinfluß vor Cap Leven einerseits und hohe Terrigenanlieferung vor Nouakchott andererseits zurückgeführt. 8) Die Zusammensetzung und Verteilung der rezenten Grobfraktionssedimente am Kontinentalrand vor Nw-Afrika wird somit im wesentlichen als Ergebnis einer Überprägung der Biogenanlieferung durch nichtbiogene Komponenten angesehen. Wesentlicher steuernder Faktor ist demnach das hier vorherrschende Windsystem.

Concentrations of persistant organic pollutants in Great skua eggs (Stercorarius skua) from Shetland 1980 and 2008

Concentrations of POPs in Great skua eggs from Shetland are among the highest in North Atlantic seabirds, with up to 11,600 µg/kg (ww) DDE and up to 17,900 µg/kg ww SumPCB. Concentrations of legacy POPs were significantly lower in 2008 than 1980. Decreases were greatest for least persistent compounds. Median SumPBDEs increased from 99 µg/kg ww in 1980 to 173 µg/kg ww in 2008. There were changes in Great skua breeding season diet, with more adult Herring and Mackerel and less Sandeel. These changes increase exposure to POPs, since Herring and Mackerel accumulate more POPs than Sandeels. In both years, eggs with higher d15N had higher POP concentrations. In 1980, birds feeding more on demersal discard fish from trawl fisheries and less on Sandeels, had higher POP levels in eggs. In 2008, individuals feeding more on Herring and Mackerel, and less on discards, had higher POP levels in eggs.

(Table 1) Vertical fluxes of sediment matter and organic carbon in the Kara Sea and in the Yenisey and Ob estuaries

Sedimentary particle fluxes in the Kara Sea and in the Ob and Yenisey estuaries were first estimated and particulate matter composition was studied in September 1993 during Cruise 49 of R/V Dmitry Mendeleev. Twenty three bottom stations with sediment traps were deployed, and samples were collected from 13 stations. Particle fluxes ranged from 9.0 to 62.6 mg/m**2/day to the north of the Ob and Yenisey estuaries and were 18.7 to 62.0 mg/m**2/day in the southwestern part of the Kara Sea. Fluxes were up to 1321 mg/m**2/day in the Ob estuary and up to 22156 mg/m**2/day in the Yenisey estuary. Organic matter fluxes were estimated as 0.71-3.29, 4.28-9.04, 26.7, and 368 mg/m**2/day, respectively. Particulate matter is largely represented by pellets of planktic Crustacea and by "sea snow" flakes mainly composed of diatoms. Rapidly settling particles are extensively inhabited by bacterial flora.

Sr, C and O isotope ratios of Neogene sediments from DSDP Hole 38-341, Voring Plateau

The Neogene sediments from DSDP site 341 on the Voring Plateau, Norwegian Sea, contain a thin glauconitic pellet-bearing subunit, which separates underlying pelagic clays from overlying glacial-marine sediments. Oxygen isotope measurements of benthic foraminifera show a delta18O shift of + 1? during deposition of this subunit, probably a combined effect of a drop in bottom water temperature and a rise in seawater delta18O. The chronology of this sedimentological and O isotope transition is, however, poorly constrained by fossil evidence. Rb-Sr dating of glauconitic pellets indicates that the lower part of the glauconitic subunit was deposited 11.6 +/- 0.2 Ma ago. Further geochronological evidence, derived from the Sr and C isotopic compositions of foraminifera compared with known seawater-time variations, indicates that the lower pelagic clays are early to middle Miocene, deposited at a mean rate of ~15 m/Ma. The glauconitic subunit contains part of the middle Miocene and probably all of the late Miocene in a condensed sequence with a very low mean depositional rate (~0.2 m/Ma). The overlying glacial marine sediments are probably Pliocene, with a high mean rate of deposition, ~45 m/Ma. This is the first application of C, O and Sr isotopic stratigraphy combined with Rb-Sr dating of glauconitic minerals, and it illustrates the applications of this integrated approach in geochronology.

Faecal pellet production of copepoda collected in water depth up to 100 meters in the eastern Mediterranean Sea in March and April 2008 during SES_GR1

The SES_UNLUATA_GR1-Mesozooplankton faecal pellet production rates dataset is based on samples taken during March and April 2008 in the Northern Libyan Sea, Southern Aegean Sea and in the North-Eastern Aegean Sea. Mesozooplankton is collected by vertical tows within the 0-100 m layer or within the Black sea water body mass layer in the case of the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside several glass beaker of 250 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and with a 100 µm net placed 1 cm above the beaker bottom. Beakers are then placed in an incubator at natural light and maintaining the in situ temperature. After 1 hour pellets are separated from animals and placed in separated flasks and preserved with formalin. Pellets and are counted and measured using an inverted microscope. Animals are scanned and counted using an image analysis system. Carbon- Specific faecal pellet production is calculated from a) faecal pellet production, b) individual carbon: Animals are scanned and their body area is measured using an image analysis system. Body volume is then calculated as an ellipsoid using the major and minor axis of an ellipse of same area as the body. Individual carbon is calculated from a carbon- total body volume of organisms (relationship obtained for the Mediterranean Sea by Alcaraz et al. (2003) divided by the total number of individuals scanned and c) faecal pellet carbon: Faecal pellet length and width is measured using an inverted microscope. Faecal pellet volume is calculated from length and width assuming cylindrical shape. Conversion of faecal pellet volume to carbon is done using values obtained in the Mediterranean from: a) faecal pellet density 1,29 g cm**3 (or pg µm**3) from Komar et al. (1981); b) faecal pellet DW/WW=0,23 from Elder and Fowler (1977) and c) faecal pellet C%DW=25,5 Marty et al. (1994).

Faecal pellet production of copepoda collected at different water depth in the eastern Mediterranean Sea during SES_GR2

The SES_GR2-Mesozooplankton faecal pellet production rates dataset is based on samples taken during August and September 2008 in the Northern Libyan Sea, Southern Aegean Sea and the North-Eastern Aegean Sea. Mesozooplankton is collected by vertical tows within the 0-100 m layer or within the Black sea water body mass layer in the case of the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside several glass beaker of 250 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and with a 100 µm net placed 1 cm above the beaker bottom. Beakers are then placed in an incubator at natural light and maintaining the in situ temperature. After 1 hour pellets are separated from animals and placed in separated flasks and preserved with formalin. Pellets are counted and measured using an inverted microscope. Animals are scanned and counted using an image analysis system. Carbon- Specific faecal pellet production is calculated from a) faecal pellet production, b) individual carbon: Animals are scanned and their body area is measured using an image analysis system. Body volume is then calculated as an ellipsoid using the major and minor axis of an ellipse of same area as the body. Individual carbon is calculated from a carbon- total body volume of organisms (relationship obtained for the Mediterranean Sea by Alcaraz et al. (2003) divided by the total number of individuals scanned and c) faecal pellet carbon: Faecal pellet length and width is measured using an inverted microscope. Faecal pellet volume is calculated from length and width assuming cylindrical shape. Conversion of faecal pellet volume to carbon is done using values obtained in the Mediterranean from: a) faecal pellet density 1,29 g cm**3 (or pg µm**3) from Komar et al. (1981); b) faecal pellet DW/WW=0,23 from Elder and Fowler (1977) and c) faecal pellet C%DW=25,5 Marty et al. (1994).

Faecal pellet production of copepoda collected in water depth up to 20 meters in the eastern Mediterranean Sea in March and April 2008 during SES_GR1

The SES_GR1-Mesozooplankton faecal pellet production rates dataset is based on samples taken during April 2008 in the North-Eastern Aegean Sea. Mesozooplankton is collected by vertical tows within the Black sea water body mass layer in the NE Aegean, using a WP-2 200 µm net equipped with a large non-filtering cod-end (10 l). Macrozooplankton organisms are removed using a 2000 µm net. A few unsorted animals (approximately 100) are placed inside several glass beaker of 250 ml filled with GF/F or 0.2 µm Nucleopore filtered seawater and with a 100 µm net placed 1 cm above the beaker bottom. Beakers are then placed in an incubator at natural light and maintaining the in situ temperature. After 1 hour pellets are separated from animals and placed in separated flasks and preserved with formalin. Pellets are counted and measured using an inverted microscope. Animals are scanned and counted using an image analysis system. Carbon- Specific faecal pellet production is calculated from a) faecal pellet production, b) individual carbon: Animals are scanned and their body area is measured using an image analysis system. Body volume is then calculated as an ellipsoid using the major and minor axis of an ellipse of same area as the body. Individual carbon is calculated from a carbon- total body volume of organisms (relationship obtained for the Mediterranean Sea by Alcaraz et al. (2003) divided by the total number of individuals scanned and c) faecal pellet carbon: Faecal pellet length and width is measured using an inverted microscope. Faecal pellet volume is calculated from length and width assuming cylindrical shape. Conversion of faecal pellet volume to carbon is done using values obtained in the Mediterranean from: a) faecal pellet density 1,29 g cm**3 (or pg µm**3) from Komar et al. (1981); b) faecal pellet DW/WW=0,23 from Elder and Fowler (1977) and c) faecal pellet C%DW=25,5 Marty et al. (1994).

Copepod abundance and fecal pellet production, sinking rate, and degradation in samples obtained during Leg 7 of Galathea 3 cruise 2006

The vertical distribution of copepods, fecal pellets and the fecal pellet production of copepods were measured at seven stations across the Southern Indian Ocean from productive areas off South Africa to oligotrophic waters off Northern Australia during October/November 2006. We quantified export of copepod fecal pellet from surface waters and how much was retained. Furthermore, the potential impact of Oncaea spp. and harpacticoid copepods on fecal pellets degradation was evaluated and found to be regional substantial. The highest copepod abundance and fecal pellet production was found in the western nutrient-rich stations close to South Africa and the lowest at the central oligotrophic stations. The in situ copepod fecal pellet production varied between 1 and 1,000 µg C/m**3/day. At all stations, the retention of fecal pellets in the upper 400 m of the water column was more than 99% and the vertical export of fecal pellets was low (<0.02 mg/m**2/day).

Documentation of sediment cores from the Great Meteor Seamount, North Atlantic

Sedimentological and biostratigraphic investigations of 15 cores (total length: 88 m) from the vicinity of Great Meteor seamount (about 30° N, 28° W) showed that the calcareous ooze are asymmetrically distributed around the seamount and vertically differentiated into two intervals. East and west of the seampunt, the upper "A"-interval is characterized by yellowish-brown sediment colors and bioturbation; ash layers and diatoms are restricted to the eastern cores. On both seamount flanks, the sediment of the lower "B"-interval are white and very rich in CaCO3 with a major fine silt (2-16 µ) mode (mainly coccoliths). Lamination, manganese micronodules, Tertiary foraminifera and discoasters, and small limestone and basalt fragments are typical of the "B"-interval of the eastern cores only. The sediments contain abundant displaced material which was reworked from the upper parts of the seamount. The sedimentation around the seamount is strongly influenced by the kind of displaced material and the intensity of its differentiated dispersal: the sedimentation rates are generally higher on the east than on the west flank /e.g. in "B": 0.9 cm/1000 y in the W; 3.1 cm/1000 y in the E), and lower for the "A" than for the "B"-interval. The lamination is explained by the combination of increased sedimentation rates with a strong input of material poor in organic carbon producing a hostile environment for benthic life. The CaCO3 content of the core is highly influenced by the proportion of displaced bigenous carbonate material (mainly coccoliths). The genuine in-situ conditions of the dissolution facies are only reflected by the minimum CaCO3 values of the cores (CCD = about 5,500 m; first bend in dissolution curve = 4,000 m; ACD = about 3,400 m). The preservation of the total foraminiferal association depends on the proportions of in-situ versus displaced specimens. In greater water depths (stronger dissolution), for example, the preservation can be improved by the admixture of relatively well preserved displaced foraminifera. Carbonate cementation and the formation of manganese micronodules are restricted to microenvironments with locally increased organic carbon contents (e.g. pellets; foraminifera). The ash layers consist of redeposited, silicic volcanic glass of trachytic composition and Mio-Pliocene age; possibly, they can be derived from the upper part of the seamount. Siliceous organisms, especially diatoms, are frequent close to the ash layers and probably also redeposited. Their preservation was favoured by the increase of the SiO2 content in the pore water caused by the silicic volcanic glass. The cores were biostraftsraphically subdivided with the aid of planktonic foraminifera and partly alsococcoliths. In most cases, the biostratigraphically determined cold- and warm sections could be correlated from core to core. Almost all cores do not penetrate the Late Pleistocene. All Tertiary fossils are reworked. In general, the warm/cold boundary W2/C2 corresponds with the lithostratigraphic A/B boundray. Benthonic foraminifera indicate the original site deposition of the displaced material (summit plateau or flanks of the seamount). The asymmetric distribution of the sediments around the seamount east and west of the NE-directed antarctic bottom current (AABW) is explained by the distortion of the streamlines by the Coriolis force; by this process the current velocity is increased west of the seamount and decreased east of it. The different proportion of displaced material within the "A" and "B" interval is explained by changes of the intensity of the oceanic circulation. At the time of "B" the flow of the AABW around the seamount was stronger than during "A"; this can be inferred from the presence of characteristic benthonic foraminifera. The increased oceanic circulation implies an enhanced differentiation of the current velocities, and by that, also of the sedimentation rates, and intensifies the winnowed sediment material was transported downslope by turbid layers into the deep-sea, incorporated into the current system of the AABW, and asymmetrically deposited around the seamount.

Physical properties and AMS characteristics of ODP Site 185-1149 sediments

During Ocean Drilling Program Leg 185, we studied progressive changes of microfabrics of unconsolidated pelagic and hemipelagic sediments in Holes 1149A and 1149B in the northwest Pacific at 5818 m water depth. We paid particular attention to the early consolidation and diagenetic processes without tectonic deformation before the Pacific plate subduction at the Izu-Bonin Trench. Shape, size, and arrangement of pores were analyzed by scanning electron microscope (SEM) and were compared to anisotropy of magnetic susceptibility (AMS) data. The microfabric in Unit I is nondirectional fabric and is characterized by large peds of ~10-100 µm diameter, which are made up of clay platelets (mainly illite) and siliceous biogenic fragments. They are ovoid in shape and are mechanically packed by benthic animals. Porosity decreases from 0 to 60 meters below seafloor (mbsf) in Unit I (from 60% to 50%) in association with macropore size decreases. The microfabric of coarser grain particles other than clay in Unit II is characterized by horizontal preferred orientation because of depositional processes in Subunit IIA and burial compaction in Subunit IIB. On the other hand, small peds, which are probably made of fragments of fecal pellets and are composed of smectite and illite (3-30 µm diameter), are characterized by random orientation of clay platelets. The clay platelets in the small peds in Subunit IIA are in low-angle edge-to-face (EF) or face-to-face (FF) contact. These peds are electrostatically connected by long-chained clay platelets, which are interconnected by high-angle EF contact. Breaking of these long chains by overburden pressure diminishes the macropores, and the clay platelets in the peds become FF in contact, resulting in decreases in the volume of the micropores between clay platelets. Thus, porosity in Subunits IIA and IIB decreases remarkably downward. The AMS indicates random fabric and horizontal preferred orientation fabric in Units I and II, respectively. This result corresponds to that of SEM microfabric observations.In Subunit IIB, pressure solutions around radiolarian tests and clinoptilolite veins with normal displacement sense are seen distinctively below ~170 mbsf, probably in correspondence to the transition zone from opal-A to opal-CT.

Geochemistry and petrography of organic matter at DSDP Site 93-603

A series of 22 sediment samples of Cretaceous and Cenozoic age from DSDP Holes 603, 603B, and 603C at the continental rise off the northeastern American coast near Cape Hatteras was investigated by organic geochemical methods including organic carbon determination, Rock-Eval pyrolysis, gas chromatography and combined gas chromatography/mass spectrometry of extractable hydrocarbons, and kerogen microscopy. An abundance of terrigenous organic matter, including larger coal particles (almost exclusively consisting of huminite/vitrinite macerals), is the dominant characteristic of the organofacies types at Site 603. Marine organic matter, mostly structurally degraded and in the form of fecal pellets, was preserved in the Valanginian laminated marls and in Cenomanian black claystone turbidites. Long-chain nalkanes reflect the terrigenous imprint in the nonaromatic hydrocarbon fractions, whereas a second maximum at lower carbon numbers in most cases is caused by the presence of more mature recycled organic matter. Abundant isoprenoid and steroid hydrocarbons were found in sediments containing mainly marine organic matter, whereas hopanoids reflect the ubiquitous microbial activity. The organic matter in the Site 603 sediments, in so far as it is not recycled, is thermally immature.

Sampling data, experimental data and fecal pellet characteristics of water pump samples in the strait of Øresund between Denmark and Sweden during 2004/2005

Copepod fecal pellets are often degraded at high rates within the upper part of the water column. However, the identity of the degraders and the processes governing the degradation remain unresolved. To identify the pellet degraders we collected water from Øresund (Denmark) approximately every second month from July 2004 to July 2005. These water samples were divided into 5 fractions (<0.2, <2, <20, <100, <200 µm) and total (unfractionated). We determined fecal pellet degradation rate and species composition of the plankton from triplicate incubations of each fraction and a known, added amount of fecal pellets. The total degradation rate of pellets by the natural plankton community of Øresund followed the phytoplankton biomass, with maximum degradation rate during the spring bloom (2.5 ± 0.49 d**-1) and minimum (0.52 ± 0.14 d**-1) during late winter. Total pellet removal rate ranged from 22% d**-1 (July 2005) to 87% d**-1 (May). Protozooplankton (dinoflagellates and ciliates) in the size range of 20 to 100 µm were the key degraders of the fecal pellets, contributing from 15 to 53% of the total degradation rate. Free-living in situ bacteria did not affect pellet degradation rate significantly; however, culture-originating bacteria introduced in association with the pellets contributed up to 59% of the total degradation rate. An effect of late-stage copepod nauplii (>200 µm) was indicated, but this was not a dominating degradation process. Mesozooplankton did not contribute significantly to the degradation. However, grazing of mesozooplankton on the pellet degraders impacts pellet degradation rate indirectly. In conclusion, protozooplankton seems to include the key organisms for the recycling of copepod fecal pellets in the water column, both through the microbial loop and, especially, by functioning as an effective 'protozoan filter' for fecal pellets.