Metabolism modelling of the Urban Water System of Oslo using the package UWOT

Oslo, capitale della Norvegia, sta sperimentando un’improvvisa crescita della popolazione e secondo le stime fornite da Statistics Norway si prevede un aumento di 200 000 abitanti entro il 2040. La crescita della popolazione comporterà un rilevante aumento di domanda di acqua e, insieme ad altri fattori quali l’età delle infrastrutture e i cambiamenti climatici, sarà responsabile di una notevole pressione sulle infrastrutture idriche presenti. In risposta alla necessità di tempestivi cambiamenti, il gestore del servizio idrico della città (Oslo VAV) ha deciso di finanziare progetti per migliorare la robustezza delle infrastrutture idriche. Il lavoro di tesi si inserisce all’interno del progetto E3WDM, istituito nel 2005 con lo scopo di definire una gestione più efficiente della risorsa idrica di Oslo. L’obiettivo generale della tesi è la creazione di un modello metabolico attraverso il software UWOT (Makropoulos et al., 2008) con lo scopo di rappresentare i consumi idrici di due tipiche tipologie abitative nella città di Oslo. L’innovazione di questo studio consiste nella definizione e nella modellazione della domanda idrica all’interno delle abitazioni ad un livello di dettaglio molto elevato. Il nuovo approccio fornito da UWOT consente la simulazione di differenti strategie di intervento e la successiva gestione ottimale della risorsa idrica in grado di minimizzare i consumi di acqua, di energia e i costi, compatibilmente con la domanda idrica richiesta. Il lavoro di tesi comprende: -La descrizione del software UWOT, in particolare lo scopo del modello, l’innovativo approccio adottato, la struttura e il procedimento per creare un modello del sistema idrico urbano. -La definizione dei dati richiesti per la simulazione dei consumi idrici all’interno delle abitazioni nella città di Oslo e i metodi utilizzati per raccoglierli -L’applicazione del modello UWOT per la definizione dei trend di consumi idrici e la successiva analisi dei risultati

Evaluation of recycled tiles and OSB ceiling materials in closed broiler house prototypes

This study aimed at evaluating the thermal performance of a modular ceiling system for poultry houses. The reduced- and distorted-scale prototypes used ceiling modules made of reforested wood and were covered with recycled long-life package tiles. The following parameters were measured for 21 days: tile internal surface temperature (ST), globe temperature and humidity index (WBGT), and radiant heat load (RHL). Measurements were made at times of highest heat load (11:00 am, 13:00 pm, and 03:00 pm). Collected data were analyzed by "R" statistics software. Means were compared by multiple comparison test (Tukey) and linear regression was performed, both at 5% significance level. The results showed that the prototype with the ceiling was more efficient to reduce internal tile surface temperature; however, this was not sufficient to provide a comfortable environment for broilers during the growout. Therefore, other techniques to provide proper cooling are required in addition to the ceiling.

Pharmacist professionals in the prevention of drug abuse: updating roles, and opportunities

The objective of this paper was to prepare and provide resources to pharmacists and other healthcare professionals, enabling them to carry out a critical analysis on drug abuse, acquiring knowledge in several areas that effectively contribute to their personal development in this professional field. Professionals play a crucial role in the reduction and prevention of substances abuse, since they are able to advise patient about illicit drugs, psychotropic medicines and alcohol abuse. There is an urgent need to specialize pharmacists to act in the national public health service and contribute to actions aimed at the surrounding community.

Parametric model for the analysis of concrete expansion due to alkali-aggregate reaction

The alkali-aggregate reaction (AAR) is a chemical reaction that provokes a heterogeneous expansion of concrete and reduces important properties such as Young's modulus, leading to a reduction in the structure's useful life. In this study, a parametric model is employed to determine the spatial distribution of the concrete expansion, combining normalized factors that influence the reaction through an AAR expansion law. Optimization techniques were employed to adjust the numerical results and observations in a real structure. A three-dimensional version of the model has been implemented in a finite element commercial package (ANSYS(C)) and verified in the analysis of an accelerated mortar test. Comparisons were made between two AAR mathematical descriptions for the mechanical phenomenon, using the same methodology, and an expansion curve obtained from experiment. Some parametric studies are also presented. The numerical results compared very well with the experimental data validating the proposed method.

Performance of the Equivalent Reservoir Modelling Technique for Multi-Reservoir Hydropower Systems

This paper investigates the validity of a simplified equivalent reservoir representation of a multi-reservoir hydroelectric system for modelling its optimal operation for power maximization. This simplification, proposed by Arvanitidis and Rosing (IEEE Trans Power Appar Syst 89(2):319-325, 1970), imputes a potential energy equivalent reservoir with energy inflows and outflows. The hydroelectric system is also modelled for power maximization considering individual reservoir characteristics without simplifications. Both optimization models employed MINOS package for solution of the non-linear programming problems. A comparison between total optimized power generation over the planning horizon by the two methods shows that the equivalent reservoir is capable of producing satisfactory power estimates with less than 6% underestimation. The generation and total reservoir storage trajectories along the planning horizon obtained by equivalent reservoir method, however, presented significant discrepancies as compared to those found in the detailed modelling. This study is motivated by the fact that Brazilian generation system operations are based on the equivalent reservoir method as part of the power dispatch procedures. The potential energy equivalent reservoir is an alternative which eliminates problems with the dimensionality of state variables in a dynamic programming model.

Efficient Modeling of Thin Wires in a Lossy Medium by Finite Elements Applied to Grounding Systems

A procedure is proposed to accurately model thin wires in lossy media by finite element analysis. It is based on the determination of a suitable element width in the vicinity of the wire, which strongly depends on the wire radius to yield accurate results. The approach is well adapted to the analysis of grounding systems. The numerical results of the application of finite element analysis with the suitably chosen element width are compared with both analytical results and those computed by a commercial package for the analysis of grounding systems, showing very good agreement.

DEVELOPMENT OF A MICRO-HEAT EXCHANGER WITH STACKED PLATES USING LTCC TECHNOLOGY

A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC). The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics) to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm(3).

Miniaturized structures for removal or selection of particles from liquid flow

The aim of this work was the development of miniaturized structures useful for retention and/or selection of particles and viscous substances from a liquid flow. The proposed low costs structures are similar to macroscopic wastewater treatment systems, named baffles, and allow disassemble. They were simulated using FEMLAB 3.2b package and manufactured in acrylic with conventional tools. Tests for retention or selection of particles in water or air and viscous fluids in water were carried out. Either in air or water particles with 50 mu m diameter will be retained but not with 13 mu m diameter. In aqueous flow, it is also possible the retention of viscous samples, such as silicone 350 cSt. The simulated results showed good agreement with experimental measurements. These miniaturized structures can be useful in sample pretreatment for chemical analysis and microorganism manipulation. (C) 2007 Elsevier B.V. All rights reserved.

Sensory Stability of Ultra-High Temperature Milk in Polyethylene Bottle

The objective of this study was to evaluate the sensory stability of ultra-high temperature (UHT) milk subjected to different heat treatments and stored at room temperature in white high density polyethylene bottles (HDPE) pigmented with titanium dioxide. Two lots of 300 units each were processed, respectively, at 135 and 141 degrees C/10 s using indirect heating and subsequently aseptically filled in an ISO class 7 clean room. These experimental lots were evaluated for appearance, aroma, flavor, and overall appreciation and compared to samples of commercial UHT milk purchased from local commercial stores. The time-temperature combinations investigated did not affect either the acceptability or the shelf life of the milk. Despite the limited light barrier properties of HDPE bottles, the product contained in the package tested exhibited good stability, with a shelf life ranging from 4 to 11 wk. Within this time period, the acceptability of the experimental lots was similar to that of the commercial products. The results achieved in this study contribute to turn the low-cost UHT system investigated into a technically viable option for small-size dairy processing plants.

Thermodynamic modelling of an Al(2)O(3)-MnO system using the ionic model

The thermodynamic assessment of an Al(2)O(3)-MnO pseudo-binary system has been carried out with the use of an ionic model. The use of the electro-neutrality principles in addition to the constitutive relations, between site fractions of the species on each sub-lattice, the thermodynamics descriptions of each solid phase has been determined to make possible the solubility description. Based on the thermodynamics descriptions of each phase in addition to thermo-chemical data obtained from the literature, the Gibbs energy functions were optimized for each phase of the Al(2)O(3)-MnO system with the support of PARROT(R) module from ThemoCalc(R) package. A thermodynamic database was obtained, in agreement with the thermo-chemical data extracted from the literature, to describe the Al(2)O(3)-MnO system including the solubility description of solid phases. (C) 2009 Elsevier Ltd. All rights reserved.

Inhibitory effects of Solidago chilensis Meyen hydroalcoholic extract on acute inflammation

Aim of the study: Alcoholic or hydroalcoholic preparations of the plant Solidago chilensis Meyen (Asteraceae) are employed in popular medicines to treat inflammation. The anti-inflammatory effects of the hydroalcoholic extract of aerial parts of the plant (93% ethanol) were investigated and the main components of the extract were identified. Materials and methods: Ear oedema was induced in male Wistar rats by topical application of the chloroform fraction of latex-extract from Euphorbia milii. Leukocyte mobilisation was quantified after air-pouch inflammation evoked by oyster glycogen. Leukocyte-endothelial interactions and mast cell degranulation were quantified by intravital microscopy. The extract itself was characterised via HPLC-DAD-MS and HPLC-MS/MS. Results: Topical (12.5-50 mg/kg) or intraperitoneal (25 or 50 mg/kg) administrations of the extract reduced ear oedema formation (>25% reduction). Intraperitoneal applications of 25 mg/kg of extract inhibited the migration of polymorphonuclear cells into the inflamed cavity (about 50%). In addition, the rolling behaviour and adherence of circulating leukocytes to postcapillary venules of the mesentery network was diminished (50%), but the mast cell degranulation in the perivascular area was not affected. The major components of the extract were identified as caffeoylquinic acid derivatives and the flavonoid rutin. Conclusions: The data presented herein show local and systemic anti-inflammatory effects of the hydroalcoholic extract of aerial parts of Solidago chilensis, and implicate the inhibition of leukocyte-endothelial interactions as an important mechanism of the extract`s action. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

A Validated Reverse-phase HPLC Analytical Method for the Quantification of Phenolic Compounds in Baccharis dracunculifolia

Introduction - Baccharis dracunculifolia, which has great potential for the development of new phytotherapeutic medicines, is the most important botanical source of the southeastern Brazilian propolis, known as green propolis on account of its color. Objective - To develop a reliable reverse-phase HPLC chromatographic method for the analysis of phenolic compounds in both B. dracunculifolia raw material and its hydroalcoholic extracts. Methodology - The method utilised a C(18) CLC-ODS (M) (4.6 x 250 mm) column with nonlinear gradient elution and UV detection at 280 nm. A procedure for the extraction of phenolic compounds using aqueous ethanol 90%, with the addition of veratraldehyde as the internal standard, was developed allowing the quantification of 10 compounds: caffeic acid, coumaric acid, ferulic acid, cinnamic acid, aromadendrin-4`-methyl ether, isosakuranetin, drupanin, artepillin C, baccharin and 2,2-dimethyl-6-carboxyethenyl-2H-1-benzopyran acid. Results - The developed method gave a good detection response with linearity in the range 20.83-800 mu g/mL and recovery in the range 81.25-93.20%, allowing the quantification of the analysed standards. Conclusion - The method presented good results for the following parameters: selectivity, linearity, accuracy, precision, robustness, as well as limit of detection and limit of quantitation. Therefore, this method could be considered as an analytical tool for the quality control of B. dracunculifolia raw material and its products in both cosmetic and pharmaceutical companies. Copyright (C) 2008 John Wiley & Sons, Ltd.

Processing of Rosmarinus officinalis Linne extract on spray and spouted bed dryers

This article presents an investigation of the potential of spray and spouted bed technology for the production of dried extracts of Rosmarinus officinalis Linne, popularly known as rosemary. The extractive solution was characterized by loss on drying, extractable matter and total phenolic and flavonoid compounds (chemical markers). The product was characterized by determination of loss on drying, size distribution, morphology, flow properties and thermal degradation and thermal behavior. The spray and spouted bed dryer performance were assessed through estimation of thermal efficiency, product accumulation and product recovery. The parameters studied were the inlet temperature of the spouting gas (80 and 150 degrees C) and the feed mass flow rate of concentrated extract relative to the evaporation capacity of the dryer, W-s/W-max (15 to 75%). The atomizing air flow rate was maintained at 20 l/min with a pressure of 196.1 kPa. The spouting gas flow rate used in the drying runs was 40% higher than the gas flow under the condition of minimum spouting. The spray drying gas flow rate was fixed at 0.0118 kg/s. Under the conditions studied, performance in the spray and spouted bed drying of rosemary extract was poor, causing high degradation of the marker compounds (mainly the phenolic compounds). Thus, process improvements are required before use on an industrial scale.

The use of complementary and alternative therapies by patients with cancer

The aim of this research was to assess the prevalence and predictors of complementary and alternative therapy (CAT) use among cancer patients in Australia. A total of 1492 cancer patients attending nine major public cancer treatment centers in New South Wales, Australia, were asked to complete the Supportive Care Needs Survey. Of the 1354 consenting patients, 888 (65%) returned a completed survey. This article reports the secondary analyses of the survey data, specifically focusing on CAT use. For all cancers, 17.1% of patients were using at least one CAT. The two main demographic characteristics of CAT users were gender and age, where females were more likely to use CAT than males and that CAT use declined as age increased. Time since diagnosis was identified as the only significant clinical predictor of CAT use, where CAT use increased with time until 5 years since diagnosis. Our research shows that herbal treatments and naturopathy are the most popular CAT used by cancer patients (constituting over 30% of all CAT use recorded). The use of CAT among cancer patients is a significant issue in cancer care, especially considering the potential interactions between CAT and conventional medicines. Given that many cancer patients may not be aware of potential risks associated with these interactions it is important that oncologists and others involved in cancer patient care are informed about CAT and its use amongst their patients.