666 resultados para PSYCHOLOGICAL DISTRESS
Resumo:
OBJECTIVES: In 2002, the canton of Fribourg, Switzerland, implemented a coordinated pharmaceutical care service in nursing homes to promote rational drug use. In the context of this service, a project was conducted to develop recommendations for the pharmacological management of behavioral and psychological symptoms of dementia (BPSD) in nursing home residents. DESIGN AND METHODS: Selected evidence-based guidelines and meta-analysis sources related to the management of depression, insomnia, and agitation in dementia patients were systematically searched and evaluated. Evidence and controversies regarding the pharmacological treatment of the most common BPSD symptoms were reviewed, and treatment algorithms were developed. RESULTS: Ten evidence-based guidelines and meta-analyses for BPSD management were identified, with none specifically addressing issues related to nursing home residents. Based on this literature, recommendations were developed for the practice of pharmacological management of depression, sleep disturbances, and agitation in nursing home residents. For depression, SSRIs are considered the first choice if an antidepressant is required. No clear evidence has been found for sleep disturbances; the underlying conditions need to be investigated closely before the introduction of any drug therapy. Many drugs have been investigated for the treatment of agitation, and if necessary, antipsychotics could be used, although they have significant side effects. Several areas of uncertainty were identified, such as the current controversy about typical and atypical antipsychotic use or the appropriateness of cholinesterase inhibitors for controlling agitation. Treatment algorithms were presented to general practitioners, pharmacists, and medical directors of nursing homes in the canton of Fribourg, and will now be implemented progressively, using educational sessions, pharmaceutical counseling, and monitoring. CONCLUSION: Based on existing evidence-based studies, recommendations were developed for the practice of pharmacological management of depression, sleep disturbances, and agitation in nursing home residents. It should be further studied whether these algorithms implemented through pharmaceutical care services will improve psychotropic drug prescriptions and prevent drug-related problems in nursing home residents
Resumo:
This paper describes a one-month-old girl presenting with respiratory and growth failure due to diaphragmatic paralysis associated with left brachial plexus palsy after forceps delivery. Despite continuous positive pressure ventilation and nasogastric feeding, the situation did not improve and a laparoscopic diaphragmatic plication had to be performed. When dealing with a child born with brachial plexus palsy, one must think of this possible association and if necessary proceed to the complementary radiological examinations. The treatment must avoid complications like feeding difficulties and failure to thrive, respiratory infections or atelectasis. It includes intensive support and a good evaluation of the prognosis of the lesion to decide the best moment for a surgical therapy.
Resumo:
Extensive population-based genome-wide association studies have identified an association between the FTO gene and BMI; however, the mechanism of action is still unknown. To determine whether FTO may influence weight regulation through psychological and behavioral factors, seven single-nucleotide polymorphisms (SNPs) of the FTO gene were genotyped in 1,085 individuals with anorexia nervosa (AN) and 677 healthy weight controls from the international Price Foundation Genetic Studies of Eating Disorders. Each SNP was tested in association with eating disorder phenotypes and measures that have previously been associated with eating behavior pathology: trait anxiety, harm-avoidance, novelty seeking, impulsivity, obsessionality, compulsivity, and concern over mistakes. After appropriate correction for multiple comparisons, no significant associations between individual FTO gene SNPs and eating disorder phenotypes or related eating behavior pathology were identified in cases or controls. Thus, this study found no evidence that FTO gene variants associated with weight regulation in the general population are associated with eating disorder phenotypes in AN participants or matched controls. © 2011 Wiley-Liss, Inc.
Resumo:
BACKGROUND: In the past, implementation of effective palliative care curricula has emerged as a priority in medical education. In order to gain insight into medical students' needs and expectations, we conducted a survey before mandatory palliative care education was introduced in our faculty. METHODS: Seven hundred nine students answered a questionnaire mainly consisting of numeric rating scales (0-10). RESULTS: Participants attributed a high importance to palliative care for their future professional life (mean, 7.51 ± 2.2). For most students, symptom control was crucial (7.72 ± 2.2). However, even higher importance was assigned to ethical and legal issues (8.16 ± 1.9). "Self-reflection regarding their own role as a physician caring for the terminally ill along with psychological support" was also regarded as highly important (7.25 ± 2.4). Most students were moderately concerned at the prospect of being confronted with suffering and death (5.13 ± 2.4). This emotional distress was rated significantly higher by female students (5.4 ± 2.4 versus 4.6 ± 2.4; p < 0.001). Seventeen percent of all students rated their distress as being 7 of 10 or higher, which indicates a considerable psychological strain in terms of dealing with end-of-life issues in the future. Professional or personal experience with terminally ill persons lowered these anxieties significantly (4.99 ± 2.34 versus 5.47 ± 2.5, p < 0.05). CONCLUSIONS: Medical students stated a remarkably high interest in learning palliative care competencies. Responding to their specific concerns and needs-especially with regard to the acquisition of emotional coping skills-may be key for the development of successful palliative care curricula.
Resumo:
This project utilized information from ground penetrating radar (GPR) and visual inspection via the pavement profile scanner (PPS) in proof-of-concept trials. GPR tests were carried out on a variety of portland cement concrete pavements and laboratory concrete specimens. Results indicated that the higher frequency GPR antennas were capable of detecting subsurface distress in two of the three pavement sites investigated. However, the GPR systems failed to detect distress in one pavement site that exhibited extensive cracking. Laboratory experiments indicated that moisture conditions in the cracked pavement probably explain the failure. Accurate surveys need to account for moisture in the pavement slab. Importantly, however, once the pavement site exhibits severe surface cracking, there is little need for GPR, which is primarily used to detect distress that is not observed visually. Two visual inspections were also conducted for this study by personnel from Mandli Communications, Inc., and the Iowa Department of Transportation (DOT). The surveys were conducted using an Iowa DOT video log van that Mandli had fitted with additional equipment. The first survey was an extended demonstration of the PPS system. The second survey utilized the PPS with a downward imaging system that provided high-resolution pavement images. Experimental difficulties occurred during both studies; however, enough information was extracted to consider both surveys successful in identifying pavement surface distress. The results obtained from both GPR testing and visual inspections were helpful in identifying sites that exhibited materials-related distress, and both were considered to have passed the proof-of-concept trials. However, neither method can currently diagnose materials-related distress. Both techniques only detected the symptoms of materials-related distress; the actual diagnosis still relied on coring and subsequent petrographic examination. Both technologies are currently in rapid development, and the limitations may be overcome as the technologies advance and mature.
Resumo:
Congrès de la Société Française de Pédiatrie et de l'Association des Pédiatres de Langue Française (APLF)
Resumo:
The previous research performed laboratory experiments to measure the impacts of the curing on the indirect tensile strength of both CIR-foam and CIR-emulsion mixtures. However, a fundamental question was raised during the previous research regarding a relationship between the field moisture content and the laboratory moisture content. Therefore, during this research, both temperature and moisture conditions were measured in the field by embedding the sensors at a midpoint and a bottom of the CIR layer. The main objectives of the research are to: (1) measure the moisture levels throughout a CIR layer and (2) develop a moisture loss index to determine the optimum curing time of CIR layer before HMA overlay. To develop a set of moisture loss indices, the moisture contents and temperatures of CIR-foam and CIR-emulsion layers were monitored for five months. Based on the limited field experiment, the following conclusions are derived: 1. The moisture content of the CIR layer can be monitored accurately using the capacitance type moisture sensor. 2. The moisture loss index for CIR layers is a viable tool in determining the optimum timing for an overlay without measuring actual moisture contents. 3. The modulus back-calculated based on the deflection measured by FWD seemed to be in a good agreement with the stiffness measured by geo-gauge. 4. The geo-gauge should be considered for measuring the stiffness of CIR layer that can be used to determine the timing of an overlay. 5. The stiffness of CIR-foam layer increased as a curing time increased and it seemed to be more influenced by a temperature than moisture content. The developed sets of moisture loss indices based on the field measurements will help pavement engineers determine an optimum timing of an overlay without continually measuring moisture conditions in the field using a nuclear gauge.
Resumo:
Quality of life has been extensively discussed in acute and chronic illnesses. However a dynamic model grounded in the experience of patients in the course of transplantation has not been to our knowledge developed. In a qualitative longitudinal study, patients awaiting solid organ transplantation participated in semi-structured interviews: Exploring topics pre-selected on previous research literature review. Creative interview was privileged, open to themes patients would like to discuss at the different steps of the transplantation process. A qualitative thematic and reflexive analysis was performed, and a model of the dimensions constitutive of quality of life from the perspective of the patients was elaborated. Quality of life is not a stable construct in a long lasting illness-course, but evolves with illness constraints, treatments and outcomes. Dimensions constitutive of quality of life are defined, each of them containing different sub-categories depending on the organ related illness co-morbidities and the stage of illness-course.
Resumo:
Residual lung function abnormalities have been investigated in 9 children (4 boys and 5 girls) a mean 2.7 years after surviving severe adult respiratory distress syndrome (ARDS). All patients had been artificially ventilated for an average of 9.4 days with a FiO2 greater than 0.5 for 34 hours and maximal PEEP levels in the range of 8-20 cm H2O. Since the ARDS, 3 children had presented recurrent respiratory symptoms (moderate exertional dyspnea and cough) and 2 had had evidence of fibrosis on chest radiographs. In all patients abnormal lung functions were found, i.e. ventilation inequalities (8), hypoxemia (7), and obstructive (2) and restrictive (1) lung disease. A significant correlation between respirator therapy and residual lung function was found (duration of FiO2 greater than 0.5 in hours and inspiratory plateau pressure during respirator therapy vs. ventilation inequalities and hypoxemia).
Resumo:
Mixture materials, mix design, and pavement construction are not isolated steps in the concrete paving process. Each affects the other in ways that determine overall pavement quality and long-term performance. However, equipment and procedures commonly used to test concrete materials and concrete pavements have not changed in decades, leaving gaps in our ability to understand and control the factors that determine concrete durability. The concrete paving community needs tests that will adequately characterize the materials, predict interactions, and monitor the properties of the concrete. The overall objectives of this study are (1) to evaluate conventional and new methods for testing concrete and concrete materials to prevent material and construction problems that could lead to premature concrete pavement distress and (2) to examine and refine a suite of tests that can accurately evaluate concrete pavement properties. The project included three phases. In Phase I, the research team contacted each of 16 participating states to gather information about concrete and concrete material tests. A preliminary suite of tests to ensure long-term pavement performance was developed. The tests were selected to provide useful and easy-to-interpret results that can be performed reasonably and routinely in terms of time, expertise, training, and cost. The tests examine concrete pavement properties in five focal areas critical to the long life and durability of concrete pavements: (1) workability, (2) strength development, (3) air system, (4) permeability, and (5) shrinkage. The tests were relevant at three stages in the concrete paving process: mix design, preconstruction verification, and construction quality control. In Phase II, the research team conducted field testing in each participating state to evaluate the preliminary suite of tests and demonstrate the testing technologies and procedures using local materials. A Mobile Concrete Research Lab was designed and equipped to facilitate the demonstrations. This report documents the results of the 16 state projects. Phase III refined and finalized lab and field tests based on state project test data. The results of the overall project are detailed herein. The final suite of tests is detailed in the accompanying testing guide.