Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

POPULATION GENETIC STUDIES ON THE OIL SARDINE ( Sardinella longiceps )

The objective of present investigation was to study the population genetic structure of S. longiceps by applying three different basic population genetic techniques such as cytogenetics, non-enzymatic biochemicalgenetics (general protein) and morphomeristics/metrics.

Effects of the Piscicides, Mahua Oil Cake and Croton Seed on the Prawn Culture System

Department of Marine Biology, Microbiology and Biochemistry

BIOCHEMICAL GENETIC STUDIES ON THE OIL SARDINE, Sardinella longiceps (CUVIER AND VALENCIENNES, 1847) FROM SELECTED CENTRES OF THE WEST COAST OF INDIA

The main objective of the present investigation was to study the biochemical genetic variability within the species and genetic structure of its regional populations from west coast. Realising the recent report of occurrence of oil sardine fishery in east coast of India, population samples from Mandapam and Madras were also included in the present investigation. The original data gathered on the population genetics of the species have helped to interpret and evaluate the results objectively. The important conclusions drawn from a detailed discussions on the subject would throw some light on the probable process of problematic fluctuations in the abundance of oil sardine fishery of India. The academic and applied values of present discoveries need not be emphasised. The data used for the doctoral thesis were generated during the ICAR ad-hoc project on the "Population genetic studies on oil sardine, sardinella longiceps to identity distinct genetic stocks", carried out at CMFRI, Cochin during the years, 1988-1991

Bioremediation of petroleum sludge through Phytoremediation.Land farming and Microbial enhanced oil separation

The objective of this research is to study the feasibility of bioremediating the oily sludge from a refinery site. Three different methods of waste treatment were tried i.e. phytoremediation, land farming and microbial enhanced oil separation in laboratory scale treatment systems. A multiprocess approach by combination of phytoremediation, biostimulation and microbial enhanced oil separation is also presented. The methods of analysis, experimental procedure, and results are incorporated into five chapters of this thesis entitled "Bioremediation of petroleum sludge through phytoremediation, land farming and microbial enhanced oil separation.

Characterization of Wastes from Natural Rubber and Rubber Wood Processing Industries and Their Utilization for Biomethanation

The research work which was carried out to characterization of wastes from natural rubber and rubber wood processing industries and their utilization for biomethanation. Environmental contamination is an inevitable consequence of human activity. The liquid and solid wastes from natural rubber based industries were: characterized and their use for the production of biogas investigated with a view to conserve conventional energy, and to mitigate environmental degradation.Rubber tree (flevea brasiliensis Muell. Arg.), is the most important commercial source of natural rubber and in india. Recently, pollution from the rubber processing factories has become very serious due to the introduction of modern methods and centralized group processing practices.The possibility of the use of spent slurry as organic manure is discussed.l0 percent level of PSD, the activity of cellulolytic, acid producing,proteolytic, lipolytic and methanogenic bacteria were more in the middle stage of methanogenesis.the liquid wastes from rubber processing used as diluents in combination with PSD, SPE promoted more biogas production with high methane content in the gas.The factors that favour methane production like TS, VS, cellulose and hemicellulose degradation were favoured in this treatment which led to higher methane biogenesis.The results further highlight ways and means to use agricultural wastes as alternative sources of energy.

Studies on the Composition and Structure of Palm Oil Glycerides

During the last couple of decades, the oil palm has emerged as the second largest source of edible oil in the world. Recently oil palm has been introduced commercially in India to augment edible oil supply in the country. Currently, about 10,000 hectares are under oil palm cultivation in India, and it is envisaged to cover about 6 lakh hectares in the coming years. Though oil palm is a major commercial oil crop, not much basic information on the lipids of the fruit (the source of palm oil) is available even where oil palm is cultivated in a very large scale. Being a new crop to India, it is of paramount importance to understand the basic chemistry/biochemistry of the lipids, which in turn, may find practical applications in the area of processing and product development. The present investigation entitled "Studies on the Composition and Structure of Palm Oil Glycerides" was designed with a view to elucidate the lipid composition and structure under conditions such as fruit development and processing.

Studies on lemongrass oil

The thesis deals with the different properties and characteristics of oil of lemon grass.. The oil of lemongrass (Cymbopogon flexuosus) is one of the most important essential oils. It will continue to be one of the "big ten" of our essential oils1. Lemongrass oil is obtained from certain species of grasses of the genus cymbopogon. The genus consists of about 80 species, 10 to 12 of which are known to occur in India. Lemongrass is a stoloniferous plant. The plant grows wild in many tropical andsemitropical parts of Asia, Africa and in parts of Central America and South America. For the extraction of the oil however only cultivated lemongrass is employed. The trade distinguishes two Principal types of lemongrass oil, viz. the East Indian Oil and West Indian Oil. There was much confusion, years ago, about the taxonomy of the plants which yield theEast Indian and West Indian types of lemongrass oil, however Stapf2 ended the long controversy of identifying the plant yielding the East Indian type oil as Cymbopogon flexuosus (D.C.) Stapf and the plant yielding the West Indian type oil as Cymbopogon citrates (D.C.) stapf. The 2 plants have_been named variously also Andropogon nardus var. Flexuosus Hack or A. citratus D.C. respectively

Microbial enzyme production utilizing banana wastes

A critical survey of the fruits and vegetable markets of the towns and cities in South India reveals that banana fruit stalk wastes share a dominant proportion among the solid wastes generated. In the light of the review of literature presented in the foregoing section, few reports are available on the utilisation of banana waste for the production of alcoholic beverages, biogas, and single cell protein. However, it is not yet tried for the production of industrial enzymes. Moreover, preliminary fermentation studies conducted under uncontrolled conditions revealed that banana fruit stalk could be aptly utilised as solid substrate? for the industrial production of microbial amylases and cellulases at a cheaper cost. Therefore, it was proposed to conduct a detailed study towards the development of a suitable fermentation process for the production of industrial enzymes using banana fruit stalk wastes, which is rich in carbohydrate, as solid substrate, employing bacteria, under SSF.

Effects Of The Piscicides, Mahua Oil Cake And Croton Seed On The Prawn Culture System

The present research programme envisages a comparative study of the effects of two piscicides of plant origin, viz., mahua oil cake, a derivative from the plant fig Iatifolia and croton seed, a product from the plant Croton tiglium. Although some reports on the effects of mahua oil cake and croton seed on fresh water pond culture systems are available, information on their effect on brackishwater culture systems are rather scanty This was the guiding principle for launching the present study It is hoped that the findings will enable aquaculturists to make use of the piscicides in a more rational and efficient way, and will go a long way towards realising the maximum return liom culture systems without hampering the environment. The thesis is presented in seven chapters such as Introduction, Review of literature, Materials and Methods, Results, Discussion, Summary and Bibliography