Novel periodically loaded E-plane filters

Novel E-plane waveguide filters with periodically loaded resonators are proposed. The proposed filters make use of the slow wave effect in order to achieve improved stopband performance and size reduction of roughly 50% without introducing any complexity in the fabrication process. Numerical and experimental results are presented to validate the argument.

Effect of plane of nutrition of 1-and 2-year-old ewes in early and mid-pregnancy on ewe reproduction and offspring performance up to weaning

The objective of the present study was to determine the effect of plane of nutrition in early pregnancy (EP) and mid-pregnancy (W), on the productive performance of 1- and 2-year-old ewes and their offspring. Over 2 successive years, between days 0 and 39 after synchronized mating (EP), 1- (n=117) and 2- (n=52) year-old ewes were allowed 60% (low, L-EP), 100% (medium, M-EP) or 200% (high, H-EP) of requirements for maintenance (M). Between days 40 and 90 (MP), 1-year-old ewes were allowed 140% (M-MP) or 200% (H-MP), while 2-year-old ewes were allowed 80% (M-MP) or 140% (H-MP) of their M requirement. After day 90, all ewes were fed to meet requirements for late pregnancy. Increasing the plane of nutrition between days 0 and 39 resulted in increases in live weight (LW) (PM-EP>LEP), differences that in 1-year-old ewes were sustained to lambing (P0.05). These ewes exhibited more positive maternal behaviours (e.g. increased grooming frequency and duration, P

Nutritonal status of adult ewes during early and mid-pregnancy. 1. Effects of plane of nutrition on ewe reproduction and offspring performance to weaning

The objective of this study was to determine the effects of plane of nutrition during early and mid-pregnancy on the performance of mature ewes and their offspring. From day 0 to day 39 post mating (early pregnancy, EP), 82 multiparous ewes were fed to provide either 60% (low, L), 100% (medium, M) or 200% (high, H) of predicted metabolisable energy (ME) requirements for maintenance, following a synchronised mating. From day 40 to day 90 (mid-pregnancy, MP), ewes were provided with either 80% (M) or 140% (H) of ME requirements. After 90 days of gestation, all ewes were fed to meet requirements for late pregnancy. During EP, mean live weight (LW) and body condition score (BCS) change of ewes were -6.3, -0.8 and +6.0kg and -0.02, +0.10 and +0.22 units in the L-, M- and H-EP treatments, respectively. During MP, mean LW and BCS change were -0.8 and +4.9kg and -0.09 and +0.09 units in the M- and H-MP treatments, respectively (P 0. 05) on conception rate, although there tended to be an inverse relationship (P = 0.085) between plane of nutrition in EP and plasma progesterone concentrations at day 42 of gestation. EP nutrition influenced foetal development with lambs from ewes offered diet L-EP being smaller (P

Design of a salisbury screen absorber using frequency selective surfaces to improve bandwidth and angular stability performance

A new design method that greatly enhances the reflectivity bandwidth and angular stability beyond what is possible with a simple Salisbury screen is described. The performance improvement is obtained from a frequency selective surface (FSS) which is sandwiched between the outermost 377 Ω/square resistive sheet and the ground plane. This is designed to generate additional reflection nulls at two predetermined frequencies by selecting the size of the two unequal length printed dipoles in each unit cell. A multiband Salisbury screen is realised by adjusting the reflection phase of the FSS to position one null above and the other below the inherent absorption band of the structure. Alternatively by incorporating resistive elements midway on the dipoles, it is shown that the three absorption bands can be merged to create a structure with a −10 dB reflectivity bandwidth which is 52% larger and relatively insensitive to incident angle compared to a classical Salisbury screen having the same thickness. CST Microwave Studio was used to optimise the reflectivity performance and simulate the radar backscatter from the structure. The numerical results are shown to be in close agreement with bistatic measurements for incident angles up to 40° over the frequency range 5.4−18 GHz.

Monitoring of Corrosion in Structural Reinforcing Bars: performance comparison using in-situ fibre optic and electric wire strain gauge systems

Abstract This work addresses the problems of effective in situ measurement of the initiation or the rate of steel corrosion in reinforced concrete structures through the use of optical fiber sensor systems. By undertaking a series of tests over prolonged periods, coupled with acceleration of corrosion, the performance of fiber Bragg grating-based sensor systems attached to high-tensile steel reinforcement bars (ldquorebarsrdquo), and cast into concrete blocks was determined, and the results compared with those from conventional strain gauges where appropriate. The results show the benefits in the use of optical fiber networks under these circumstances and their ability to deliver data when conventional sensors failed.

Mid-infrared a-b plane response of YBa2Cu3O7-delta as a function of doping and temperature determined by attenuated total reflection

The mid-infrared optical response of c-axis thin films of YBa2Cu3O7-delta has been studied using Otto-configuration attenuated total reflectance. The measured reflectance-angle characteristics are dominated by a strong absorption feature due to the excitation of surface plasmons, and can be modeled to determine the a-b plane dielectric function. The results show that while epsilon(i,) and therefore sigma(r), are temperature independent, \epsilon(r)\ exhibits a moderate decrease with generalized Drude analysis shows that the plasma frequency is independent of temperature, but decreases with decreasing doping. The scattering rate increases with temperature, and also increases with decreasing doping, consistent with stronger coupling in the underdoped regime. The mass-enhancement is small but increases to 30-40% at delta = 0.6. Difficulties in reconciling the results with some current theories of high-T-c materials are discussed. Finally, the surface plasmon propagation lengths and penetration depths are shown to vary systematically with doping. (C) 2003 Elsevier B.V. All rights reserved.