Iowa Petroleum Underground Storage Tank Board, State of Iowa, Independent Auditor's Reports, Financial Statements and Supplementary Information, June 30, 2004

State Audit Reports

Pre-Treatment for Reduction of Asphalt Absorption in Porous Aggregate, April 2005

The objective of this research was to evaluate the performance of the product Ultracote® (a polymer based additive produced by Ultrapave, a division of Goodyear) as an aggregate pre-treatment for the reduction of asphalt binder absorption in hot mix asphalt (HMA). The product was tested with a paving project in Louisa county, Iowa with aggregate that had historically shown very high asphalt binder absorption. Results of the testing did not provide any evidence of reduction in binder absorption.

Concrete Materials Storage, Mixing and Delivery, November 2004

Proper storage practices are critical to protect materials from intermingling, contamination, or degradation, and to maintain consistent aggregate gradation throughout a project. Concrete Paving Workforce Reference no.1

A systolic array for linear MIMO detection based on an all-swap lattice reduction algorithm

A systolic array to implement lattice-reduction-aided lineardetection is proposed for a MIMO receiver. The lattice reductionalgorithm and the ensuing linear detections are operated in the same array, which can be hardware-efficient. All-swap lattice reduction algorithm (ASLR) is considered for the systolic design.ASLR is a variant of the LLL algorithm, which processes all lattice basis vectors within one iteration. Lattice-reduction-aided linear detection based on ASLR and LLL algorithms have very similarbit-error-rate performance, while ASLR is more time efficient inthe systolic array, especially for systems with a large number ofantennas.

Réduction de la consommation de sel: opportunité, impact et stratégies. [Population reduction of salt consumption: opportunities, impact and strategies].

A national survey showed that Swiss people eat high quantity of salt (9.1 g per day on average). The Swiss Federal Office of Public Health (FOPH) has launched a strategy to reduce salt intake in the population in order to decrease cardiovascular morbidity and mortality, mainly via blood pressure reduction. The most effective public health measures are to reduce the salt content of processed food rich in salt because they do not need to change consumers' eating behaviours. The FOPH has chosen to collaborate with the food industry on a voluntary basis. Regular population-based surveys will be needed to monitor the impact of current measures on salt consumption, hypertension prevalence as well as cardiovascular morbidity and mortality in the years to come.

Oxidative folding of synthetic polypeptides S-protected as tert-butylthio derivatives.

A new method for oxidative folding of synthetic polypeptides assembled by stepwise solid phase synthesis is introduced. Folding is obtained in excellent yields by reacting S-tert-butylthiolated polypeptides with a 100-fold molar excess of cysteine at 37 degrees C in a slightly alkaline buffer containing chaotropic salts, and in the presence of air-oxygen. This novel protocol has been applied to the folding of S-tert-butylthiolated human thymus and activation-regulated chemokine (hu-TARC) derivatives as well as to larger segments of Plasmodium falciparum and Plasmodium berghei circumsporozoite proteins. Folded P. falciparum polypeptides have been used as substrates of endoproteinase Glu-C (Glu-C) and endoproteinase Asp-N (Asp-N) in an attempt to identify their disulfide connectivities. Particular practical advantages of the present method are (i) easy purification and storage of the S-protected peptide derivatives, (ii) elimination of the risk of cysteine alkylation during the acidolytic cleavage deprotection and resin cleavage steps, (iii) possibility to precisely evaluate the extent of folding and disulfide bond formation by mass spectrometry, and (iv) facile recovery of the final folded product.

Caution on the storage of waters and aqueous solutions in plastic containers for hydrogen and oxygen stable isotope analysis

RATIONALE The choice of containers for storage of aqueous samples between their collection, transport and water hydrogen (2H) and oxygen (18O) stable isotope analysis is a topic of concern for a wide range of fields in environmental, geological, biomedical, food, and forensic sciences. The transport and separation of water molecules during water vapor or liquid uptake by sorption or solution and the diffusive transport of water molecules through organic polymer material by permeation or pervaporation may entail an isotopic fractionation. An experiment was conducted to evaluate the extent of such fractionation. METHODS Sixteen bottle-like containers of eleven different organic polymers, including low and high density polyethylene (LDPE and HDPE), polypropylene (PP), polycarbonate (PC), polyethylene terephthalate (PET), and perfluoroalkoxy-Teflon (PFA), of different wall thickness and size were completely filled with the same mineral water and stored for 659?days under the same conditions of temperature and humidity. Particular care was exercised to keep the bottles tightly closed and prevent loss of water vapor through the seals. RESULTS Changes of up to +5 parts per thousand for d2H values and +2.0 parts per thousand for d18O values were measured for water after more than 1?year of storage within a plastic container, with the magnitude of change depending mainly on the type of organic polymer, wall thickness, and container size. The most important variations were measured for the PET and PC bottles. Waters stored in glass bottles with Polyseal (TM) cone-lined PP screw caps and thick-walled HDPE or PFA containers with linerless screw caps having an integrally molded inner sealing ring preserved their original d2H and d18O values. The carbon, hydrogen, and oxygen stable isotope compositions of the organic polymeric materials were also determined. CONCLUSIONS The results of this study clearly show that for precise and accurate measurements of the water stable isotope composition in aqueous solutions, rigorous sampling and storage procedures are needed both for laboratory standards and for unknown samples. Copyright (c) 2012 John Wiley & Sons, Ltd.

Intraoral open reduction and internal fixation of displaced mandibular angle fractures using a specific ad hoc reduction-compression forceps: a preliminary study

OBJECTIVES: To preliminarily evaluate prospectively the accuracy and reliability of a specific ad hoc reduction-compression forceps in intraoral open reduction of transverse and displaced mandibular angle fractures. STUDY DESIGN: We analyzed the clinical and radiologic data of 7 patients with 7 single transverse and displaced angle fractures. An intraoral approach was performed in all of the patients without using perioperative intermaxillary fixation. A single Arbeitsgemeinschaft Osteosynthese (AO) unilock reconstruction plate was fixed to each stable fragment with 3 locking screws (2.0 mm in 5 patients and 2.4 mm in 2 patients) at the basilar border of the mandible, according to AO/American Society of Internal Fixation (ASIF) principles. Follow-up was at 1, 3, 6, and 12 months, and we noted the status of healing and complications, if any. RESULTS: All of the patients had satisfactory fracture reduction as well as a successful treatment outcome without complications. CONCLUSION: This preliminary study demonstrated that the intraoral reduction of transverse and displaced angle fractures using a specific ad hoc reduction-forceps results in a high rate of success.

Iowa Petroleum Underground Storage Tank Board, State of Iowa, Independent Auditor's Reports, Basic Financial Statements and Supplementary Information, Schedule of Findings, June 30, 2005

State Audit Reports

Evaluation of U.S. and European Concrete Pavement Noise Reduction Methods, July 2006

Highway noise is one of the most pressing of the surface characteristics issues facing the concrete paving industry. This is particularly true in urban areas, where not only is there a higher population density near major thoroughfares, but also a greater volume of commuter traffic (Sandberg and Ejsmont 2002; van Keulen 2004). To help address this issue, the National Concrete Pavement Technology Center (CP Tech Center) at Iowa State University (ISU), Federal Highway Administration (FHWA), American Concrete Pavement Association (ACPA), and other organizations have partnered to conduct a multi-part, seven-year Concrete Pavement Surface Characteristics Project. This document contains the results of Part 1, Task 2, of the ISU-FHWA project, addressing the noise issue by evaluating conventional and innovative concrete pavement noise reduction methods. The first objective of this task was to determine what if any concrete surface textures currently constructed in the United States or Europe were considered quiet, had long-term friction characteristics, could be consistently built, and were cost effective. Any specifications of such concrete textures would be included in this report. The second objective was to determine whether any promising new concrete pavement surfaces to control tire-pavement noise and friction were in the development stage and, if so, what further research was necessary. The final objective was to identify measurement techniques used in the evaluation.

The Brazilian policy for reduction of accidents and violence aligns with international perspectives?

The study analyzed The Brazilian Policy for Reduction of Morbidity and Mortality from Accidents and Violence, in the socio-political perspective. We used as a base the chapter “Violence: a global public health problem” from the World Report on Violence and Health. The analysis revealed convergent and divergent elements of the Brazilian Policy in comparison with the international perspectives. We verified that the Brazilian Policy tried to converge to the international policies, however: it emphasizes the health promotion actions, but are limited to the context and behavior of individuals and individual communities; the performance of health professionals is expected without providing more structural investments, as the improvement in work conditions, the increase of financial and material resources; there are few clear definitions of the government and economical sector responsibilities.

Disinfection with sodium hypochlorite in hospital environmental surfaces in the reduction of contamination and infection prevention: a systematic review

OBJECTIVETo search for evidence of the efficiency of sodium hypochlorite on environmental surfaces in reducing contamination and prevention of healthcare-associated infection HAIs.METHODSystematic review in accordance with the Cochrane Collaboration.RESULTSWe analyzed 14 studies, all controlled trials, published between 1989-2013. Most studies resulted in inhibition of microorganism growth. Some decreased infection, microorganism resistance and colonization, loss of efficiency in the presence of dirty and surface-dried viruses.CONCLUSIONThe hypochlorite is an effective disinfectant, however, the issue of the direct relation with the reduction of HAIs remains. The absence of control for confounding variables in the analyzed studies made the meta-analysis performance inadequate. The evaluation of internal validity using CONSORT and TREND was not possible because its contents were not appropriate to laboratory and microbiological studies. As a result, there is an urgent need for developing specific protocol for evaluating such studies.

Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão

TEIXEIRA, José João Lopes. Departamento de Engenharia Agrícola, Centro de Ciências Agrárias da Universidade Federal do Ceará, Agosto de 2011. Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão, Cabo Verde. Orientador: José Carlos de Araújo. Examinadores: George Leite Mamede, Pedro Henrique Augusto Medeiros. O Arquipélago de Cabo Verde, situado na costa ocidental africana, sofre influência do deserto de Saara tornando o clima caraterizado por pluviometria muito baixa e distribuída irregularmente no espaço e no tempo. As chuvas são muito concentradas, gerando grandes escoamentos para o mar. O aumento da disponibilidade hídrica requer além da construção e manutenção de infraestrutura de captação e conservação de águas pluviais, uma gestão eficiente destes recursos. Atualmente, constitui um dos eixos estratégicos da política do estado de Cabo Verde, a captação, armazenamento e mobilização de águas superficiais através de construção de barragens. Estudos do comportamento hidrológico e sedimentológico do reservatório e da sua bacia de contribuição constituem premissas básicas para um ótimo dimensionamento, gestão e monitoramento da referida infraestrutura. É neste sentido que o presente estudo objetivou sistematizar informações hidrológicas e sedimentológicas da bacia hidrográfica da Barragem de Poilão (BP) e apresentar proposta operacional de longo prazo. A área de estudo ocupa 28 km² a montante da Bacia Hidrográfica da Ribeira Seca (BHRS) na Ilha de Santiago. A altitude da bacia varia de 99 m, situada na cota da barragem, até 1394 m. Para o estudo, foram utilizados e sistematizados, série pluviométrica de 1973 a 2010, registos de vazão instantânea do período 1984 a 2000 e registos agroclimáticos da área de estudo (1981 a 2004). Para o preenchimento das falhas tanto dos escoamentos como da descarga sólida em suspensão, foi utilizado o método de curva chave. Para estimativa de produção de sedimentos na bacia, aplicou-se a Equação Universal de Perda de Solo (USLE) e a razão de aporte de sedimentos (SDR). O índice de retenção de sedimentos no reservatório foi estimado pelo método de Brune e a distribuição de sedimento pelo método empírico de redução de área descrito por Borland e Miller e, revisado por Lara. Para gerar e simular curvas de vazão versus garantia foi utilizado código computacional VYELAS, desenvolvido por Araújo e baseado na abordagem de Campos. Também foi avaliada a redução da vazão de retirada do período 2006 a 2026, provocado pelo assoreamento do reservatório. Concluiu-se que em média a precipitação anual é de 323 mm, concentrando-se 73% nos meses de agosto e setembro; a bacia de contribuição apresenta como valor um número de curva (CN) de 76, com abstração inicial (Ia) de 26 mm, coeficiente de escoamento de 19% e uma vazão anual afluente de 1,7 hm³(cv= 0,73); a disponibilidade hídrica para uma garantia de 85% é avaliada em 0,548 hm³/ano e não 0,671 hm³/ano como indica o projeto original. Com uma descarga sólida estimada em 22.185 m³/ano conclui-se que até o ano de 2026, a capacidade do reservatório reduz a uma taxa de 1,8 % ao ano, devido ao assoreamento, provocando uma redução de 41% da disponibilidade hídrica inicial. Nessa altura, as perdas por evaporação e sangria serão da ordem de 81% da vazão afluente de entrada no reservatório. Na base desses resultados se apresentou proposta de operação da BP.

Audit report on the Iowa Petroleum Underground Storage Tank Board (UST Board) for the year ended June 30, 2006

Audit report on the Iowa Petroleum Underground Storage Tank Board (UST Board) for the year ended June 30, 2006