Mechanisms of projectile penetration in Dyneema® encapsulated aluminum structures

Polymer composites comprising ultra-high molecular weight polyethylene (UHWMPE) fibers in a compliant matrix are now widely used in ballistic applications with varying levels of success. This is primarily due to a poor understanding of the mechanics of penetration of these composites in ballistic protection systems. In this study, we report experimental observations of the penetration mechanisms in four model systems impacted by a 12.7 mm diameter spherical steel projectile. The four model targets designed to highlight different penetration mechanisms in Dyneema® UHWMPE composites were: (i) a bare aluminum plate; (ii) the same plate fully encased in a 5.9 mm thick casing of Dyneema®; (iii) the fully encased plate with a portion of the Dyneema® removed from the front face so that the projectile impacts directly the Al plate; and (iv) the fully encased plate with a portion of the Dyneema® removed from the rear face so that the projectile can exit the Al plate without again interacting with the Dyneema®. A combination of synchronized high speed photography with three cameras, together with post-test examination of the targets via X-ray tomography and optical microscopy was used to elucidate the deformation and perforation mechanisms. The measurements show that the ballistic resistance of these targets increases in the order: bare Al plate, rear face cutout target, fully encased target and front face cutout target. These findings are explained based on the following key findings: (a) the ballistic performance of Dyneema® plates supported on a foundation is inferior to Dyneema® plates supported along their edges; (b) the apparent ballistic resistance of Dyneema® plates increases if the plates are given an initial velocity prior to the impact by the projectile, thereby reducing the relative velocity between the Dyneema® plate and projectile; and (c) when the projectile is fragmented prior to impact, the spatially and temporally distributed loading enhances the ballistic resistance of the Dyneema®. The simple model targets designed here have elucidated mechanisms by which Dyneema® functions in multi-material structures. © 2014 Elsevier Ltd.

Establishment of a normal medakafish spermatogonial cell line capable of sperm production in vitro

Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission.

Transport phenomena in radial flow MOCVD reactor with three concentric vertical inlets

Transport phenomena in radial flow metalorganic chemical vapor deposition (MOCVD) reactor with three concentric vertical inlets are studied by two-dimensional numerical modeling. By varying the parameters such as gas pressure, flow rates combination of multi-inlets, geometric shapes and sizes of reactor and flow distributor, temperatures of susceptor and ceiling, and susceptor rotation, the corresponding velocity, temperature, and concentration fields inside the reactor are obtained; the onset and change of flow recirculation cells under influences of those parameters are determined. It is found that recirculation cells, originated from flow separation near the bend of reactor inlets, are affected mainly by the reactor height and shape, the operating pressure, the flow rates combination of multi-inlets, and the mean temperature between susceptor and ceiling. By increasing the flow rate of mid-inlet and the mean temperature, decreasing the pressure, maintaining the reactor height below certain criteria, and trimming the bends of reactor wall and flow distributor to streamlined shape, the recirculation cells can be minimized so that smooth and rectilinear flow prevails in the susceptor region, which corresponds to smooth and rectilinear isotherms and larger reactant concentration near the susceptor. For the optimized reactor shape, the reactor size can be enlarged to diameter D = 40 cm and height H = 2 cm without flow recirculation. The susceptor rotation over a few hundred rpm around the reactor central axis will induce the recirculation cell near the exit and deflect the streamlines near the susceptor, which is not the case for vertical reactors. (c) 2006 Elsevier B.V. All rights reserved.

Resonant tunneling theory of planar quantum dot structures

The ballistic transport in the semiconductor, planar, circular quantum dot structures is studied theoretically. The transmission probabilities show apparent resonant tunneling peaks, which correspond to energies of bound states in the dot. By use of structures with different angles between the inject and exit channels, the resonant peaks can be identified very effectively. The perpendicular magnetic field has obvious effect on the energies of bound states in the quantum dot, and thus the resonant peaks. The treatment of the boundary conditions simplifies the problem to the solution of a set of linear algebraic equations. The theoretical results in this paper can be used to design planar resonant tunneling devices, whose resonant peaks are adjustable by the angle between the inject and exit channels and the applied magnetic field. The resonant tunneling in the circular dot structures can also be used to study the bound states in the absence and presence of magnetic field.

Micromixing enhanced by pulsating flows

We consider the micromixing enhancement by pulsating flows. Dimensionless governing equations and boundary conditions were developed for T-type micromixers with two inlet pulsating flows. The problem involves a set of parameters. Three key dimensionless parameters are identified: the Reynolds number, the Strouhal number, and the disturbance amplitude. Suitable Strouhal number or disturbance amplitude causes symmetrical meniscus-shape mixing interfaces, separating the whole mixing channel into a set of segments. Thus uniform exit species concentration can be reached. Too large or too small Strouhal number or disturbance amplitude yields the meniscus-shape mixing interfaces deviating from the centerline of the mixing channel, deteriorating the mixing performance. The optimized disturbance amplitude is increased with increases in Strouhal numbers. Low Reynolds number needs larger disturbance amplitude.

Uniform mems chip temperatures in the nucleate boiling heat transfer region by selecting suitable, medium boiling number range

The not only lower but also uniform MEMS chip temperatures can he reached by selecting suitable boiling number range that ensures the nucleate boiling heat transfer. In this article, boiling heat transfer experiments in 10 silicon triangular microchannels with the hydraulic diameter of 55.4 mu m were performed using acetone as the working fluid, having the inlet liquid temperatures of 24-40 degrees C, mass fluxes of 96-360 kg/m(2)s, heat fluxes of 140-420 kW/m(2), and exit vapor mass qualities of 0.28-0.70. The above data range correspond to the boiling number from 1.574 x 10(-3) to 3.219 x 10(-3) and ensure the perfect nucleate boiling heat transfer region, providing a very uniform chip temperature distribution in both streamline and transverse directions. The boiling heat transfer coefficients determined by the infrared radiator image system were found to he dependent on the heat Axes only, not dependent on the mass Axes and the vapor mass qualities covering the above data range. The high-speed flow visualization shows that the periodic flow patterns take place inside the microchannel in the time scale of milliseconds, consisting of liquid refilling stage, bubble nucleation, growth and coalescence stage, and transient liquid film evaporation stage in a full cycle. The paired or triplet bubble nucleation sites can occur in the microchannel corners anywhere along the flow direction, accounting for the nucleate boiling heat transfer mode. The periodic boiling process is similar to a series of bubble nucleation, growth, and departure followed by the liquid refilling in a single cavity for the pool boiling situation. The chip temperature difference across the whole two-phase area is found to he small in a couple of degrees, providing a better thermal management scheme for the high heat flux electronic components. Chen's [11 widely accepted correlation for macrochannels and Bao et al.'s [21 correlation obtained in a copper capillary tube with the inside diameter of 1.95 mm using R11 and HCFC123 as working fluids can predict the present experimental data with accepted accuracy. Other correlations fail to predict the correct heat transfer coefficient trends. New heat transfer correlations are also recommended.

Two-dimensional numerical simulations of shock waves in micro convergent-divergent nozzles

The steady two-dimensional Navier-Stokes equations with the slip wall boundary conditions were used to simulate the supersonic flow in micro convergent-divergent nozzles. It is observed that shock waves can take place inside or outside of the micronozzles under the earth environment. For the over-expanded flows, there is a boundary layer separation point, downstream of which a wave interface separates the viscous boundary layer with back air flow and the inviscid core flow. The oblique shock wave is followed by the bow shock and shock diamond. The viscous boundary layer thickness relative to the whole nozzle width on the exit plane is increased but attains the maximum value around of 0.5 and oscillates against this value with the continuous increasing of the nozzle upstream pressures. The viscous effect either changes the normal shock waves outside of the nozzle for the inviscid flow to the oblique shock waves inside the nozzle, or transfers the expansion jet flow without shock waves for the inviscid flow to the oblique shock waves outside of the nozzle. 

体细胞核移植影响因素的研究

尽管体细胞核移植(somatic cell nuclear transfer, SCNT)技术仍然处于 起步发展阶段，但是随着体细胞核移植技术在近些年来的飞速发展，人们已经得 到了多种哺乳动物体细胞核移植的存活后代。体细胞核移植技术在生物医药、农 业及其它领域的应用显示了这项技术的巨大发展前景。另一方面，人们发现体细 胞核移植效率低下并且体细胞克隆动物存在许多缺陷，这些主要是由于核移植技 术，供体细胞选择，体外培养系统以及卵母细胞的状态等的差异导致的。本研究 主要围绕着这些因素在体细胞核移植过程中对于克隆胚胎植入前后发育的影响 而开展，目的在于提高体细胞核移植的效率。 实验一，研究了几个因素对克隆胚胎发育和克隆效率的影响，为提高体细胞 核移植效率提供一些依据。这部分研究主要包括四倍体半克隆小鼠研究和蛋白酶 体抑制剂在克隆胚胎和孤雌激活胚胎发育中的影响。四倍体体细胞半克隆 （tetraploid semi-cloned , TSC）胚胎的体外发育结果表明，虽然TSC 胚胎可 能避免二倍体半克隆胚胎发育过程中的非整倍体现象，但是仍然不能形成胎儿。 另外，利用蛋白酶体抑制剂MG132 处理克隆胚胎的结果表明，虽然MG132 通过抑 制成熟促进因子（maturation promoting factors，MPF）活性的降低可以提高 克隆胚胎的体外发育率，但是没有改变克隆胚胎的质量。 实验二，研究了克隆技术在克隆胚胎构建和发育上的影响。首先，我们研究 了完整颗粒细胞注射到卵母细胞中所引起的变化。我们发现完整的颗粒细胞注入 到卵母细胞中之后很快引起细胞膜裂解和细胞核碎裂，从而导致激活后重构胚胎 的碎裂。这一实验表明完整供体细胞核注入的方法不适用于小鼠体细胞克隆。接 下来我们研究了不同的核移植技术――利用piezo 的直接注射法（piezoelectric microinjection，PEM）和电融合法（Electrofusion，EF）――对植入前后的克隆胚 胎以及出生后的克隆动物的影响。研究的结果发现，在PEM 法中，提高piezo 脉 冲的强度会导致供体细胞核DNA 断裂增加，使植入前克隆胚胎的细胞数目减少， 凋亡增加，从而降低克隆胚胎的质量。相反，在用EF 法产生的胚胎中细胞核DNA 的断裂很少，克隆胚胎质量相对较好。实验的结果表明，由于两种克隆技术利用 的原理不同，会对克隆胚胎的发育产生一定的影响，从而改变克隆的效率。 实验三，研究了猕猴体细胞克隆胚胎早期发育过程中细胞核内有丝分裂器蛋 白[Nuclear Mitotic Apparatus Protein，NuMA]的表达和分布。尽管在有些猕猴体 细胞核移植胚胎中没有检测到NuMA 的正确表达和分布并且有些胚胎出现了微 管组装异常，但是大多数猕猴体细胞核移植胚胎具有正常的NuMA 蛋白表达和 正常的核型。通过改进操作技术我们得到了可以发育到正常囊胚的猕猴体细胞核 移植胚胎。这些结果提示猕猴SCNT 胚胎发育失败的原因不是NuMA 等重要蛋 白的缺失。

CHANNELING ALIGNMENT FOR EPITAXIAL LIGHT-MASS FILM ON HEAVY-MASS SUBSTRATE

A simple procedure for obtaining a background-free backscattering spectrum of a light-mass film on a heavy-mass substrate by a normal incidence/grazing exit geometry has been described. Using this method such films can be aligned rapidly and accurately, and the impurity or defect information on the films can be obtained without need for realignment. Example is given from MeV Li-3+ analysis of a deposited film of Si on a single crystal substrate of yttria-stabilized, cubic zirconia.

Oscillation flow induced by underwater supersonic gas jets

This paper describes an experimental study on the oscillation flow characteristics of submerged supersonic gas jets issued from Laval nozzles. The flow pattern during the jet development and the jet expansion feedback phenomenon are studied using a high-speed camera and a pressure measurement system. The experimental results indicate that along the downstream distance, the jet has three flow regimes: (1) momentum jet; (2) buoyant jet; (3) plume. In the region near the nozzle exit a so-called bulge phenomenon is found. Bulging of the jet occurs many times before the more violent jet expansion feedback occurs. During the feedback process, the jet diameter can become several times that of the original one depending on the jet Mach number. The frequencies of the jet bulging and the jet expansion feedback are measured.

Modeling study on the flow, heat transfer and energy conversion characteristics of low-power arc-heated hydrogen/nitrogen thrusters

A modeling study is conducted to investigate the effect of hydrogen content in propellants on the plasma flow, heat transfer and energy conversion characteristics of low-power (kW class) arc-heated hydrogen/nitrogen thrusters (arcjets). 1:0 (pure hydrogen), 3:1 (to simulate decomposed ammonia), 2:1 (to simulate decomposed hydrazine) and 0:1 (pure nitrogen) hydrogen/nitrogen mixtures are chosen as the propellants. Both the gas flow region inside the thruster nozzle and the anode-nozzle wall are included in the computational domain in order to better treat the conjugate heat transfer between the gas flow region and the solid wall region. The axial variations of the enthalpy flux, kinetic energy flux, directed kinetic-energy flux, and momentum flux, all normalized to the mass flow rate of the propellant, are used to investigate the energy conversion process inside the thruster nozzle. The modeling results show that the values of the arc voltage, the gas axial-velocity at the thruster exit, and the specific impulse of the arcjet thruster all increase with increasing hydrogen content in the propellant, but the gas temperature at the nitrogen thruster exit is significantly higher than that for other three propellants. The flow, heat transfer, and energy conversion processes taking place in the thruster nozzle have some common features for all the four propellants. The propellant is heated mainly in the near-cathode and constrictor region, accompanied with a rapid increase of the enthalpy flux, and after achieving its maximum value, the enthalpy flux decreases appreciably due to the conversion of gas internal energy into its kinetic energy in the divergent segment of the thruster nozzle. The kinetic energy flux, directed kinetic energy flux and momentum flux also increase at first due to the arc heating and the thermodynamic expansion, assume their maximum inside the nozzle and then decrease gradually as the propellant flows toward the thruster exit. It is found that a large energy loss (31-52%) occurs in the thruster nozzle due to the heat transfer to the nozzle wall and too long nozzle is not necessary. Modeling results for the NASA 1-kW class arcjet thruster with hydrogen or decomposed hydrazine as the propellant are found to compare favorably with available experimental data.

Modeling study to compare the flow and heat transfer characteristics of low-power hydrogen, nitrogen and argon arc-heated thrusters

A modelling study is performed to compare the plasma °ow and heat transfer char- acteristics of low-power arc-heated thrusters (arcjets) for three di®erent propellants: hydrogen, nitrogen and argon. The all-speed SIMPLE algorithm is employed to solve the governing equa- tions, which take into account the e®ects of compressibility, Lorentz force and Joule heating, as well as the temperature- and pressure-dependence of the gas properties. The temperature, veloc- ity and Mach number distributions calculated within the thruster nozzle obtained with di®erent propellant gases are compared for the same thruster structure, dimensions, inlet-gas stagnant pressure and arc currents. The temperature distributions in the solid region of the anode-nozzle wall are also given. It is found that the °ow and energy conversion processes in the thruster nozzle show many similar features for all three propellants. For example, the propellant is heated mainly in the near-cathode and constrictor region, with the highest plasma temperature appear- ing near the cathode tip; the °ow transition from the subsonic to supersonic regime occurs within the constrictor region; the highest axial velocity appears inside the nozzle; and most of the input propellant °ows towards the thruster exit through the cooler gas region near the anode-nozzle wall. However, since the properties of hydrogen, nitrogen and argon, especially their molecular weights, speci¯c enthalpies and thermal conductivities, are di®erent, there are appreciable di®er- ences in arcjet performance. For example, compared to the other two propellants, the hydrogen arcjet thruster shows a higher plasma temperature in the arc region, and higher axial velocity but lower temperature at the thruster exit. Correspondingly, the hydrogen arcjet thruster has the highest speci¯c impulse and arc voltage for the same inlet stagnant pressure and arc current. The predictions of the modelling are compared favourably with available experimental results.

小麦—偏凸山羊草6Mv/6B代换系的研究

小麦条锈病（Puccinia striiformis f. sp. tritici）是世界性小麦病害，可导致受害小麦减产30%以上，甚至绝收。小麦条锈病在我国西南、华北麦区危害严重，四川麦区是小麦条锈病发病最重的地区之一，每年因条锈病流行造成小麦产量损失巨大。利用抗条锈病品种是控制该病害最安全、经济的有效途径，因此挖掘利用抗病新基因，开展抗病遗传基础研究是当前育种工作中面临的重要任务。 偏凸山羊草（Aegilops ventricosa，DDMvMv，2n=28）是一年生草本植物，起源于地中海西部沿岸地区，具有对小麦白粉病、锈病等高抗或免疫、耐盐、抗寒、蛋白质含量高等优良性状，是小麦遗传育种很好的种质资源。本研究以高抗条锈病的小麦—偏凸山羊草6Mv/6B代换系（Moisson 6Mv/6B）为材料，对其含有的带条锈病抗性基因的偏凸山羊草6Mv染色体在四川小麦背景中的传递情况、与小麦—簇毛麦双端体附加系所具有的白粉病抗性的聚合以及对Moisson 6Mv/6B进行电离辐射诱变筛选抗条锈病的小麦—偏凸山羊草易位系三个方面进行了研究。取得的主要研究结果如下： 1. Moisson 6Mv/6B与高感条锈病的四川地区普通小麦品种绵阳26、绵阳93-124和SW3243的杂种F1与其普通小麦亲本分别作为父、母本回交，通过对其BC1和F2的结实率、根尖细胞有丝分裂中期染色体的观察以及对条锈病抗性的鉴定，发现含6Mv染色体的F1植株作母本时的回交结实率（83.10%）普遍高于含6Mv染色体的F1植株作父本（48.61%），结实率与普通小麦基因型密切相关（χ2=34.15>>χ20.05=5.99（df=2））；6Mv染色体在三种四川小麦中通过雌、雄配子传递的传递方式与其传递率间没有显著相关性，其传递率与普通小麦基因型呈显著相关性（χ2=6.42>χ20.05=5.99（df=2））。 2. Moisson 6Mv/6B与高抗白粉病的小麦—簇毛麦双端体附加系Pana（2n=42+2t）正反杂交，希望在聚合两者抗性的同时观察不同受体背景下的抗性反应。对Moisson 6Mv/6B和Pana正反杂交的结实率、杂交后代的农艺性状进行观察，并对杂交后代进行基因组荧光原位杂交（GISH）分析及条锈病和白粉病的抗性鉴定。结果表明Moisson 6Mv/6B作母本时杂交结实率（80.56%）高于Pana作母本时（58.33%），结实率与杂交方式间紧密相关（χ2=4.96>χ20.05=3.84（df=1））；Moisson 6Mv/6B和Pana杂交后代株高比最高亲本高约10cm，成熟期也较两亲本提前两个星期左右；正反杂交后代中具有偏凸山羊草6Mv染色体的植株具有条锈病抗性，具有簇毛麦端体的植株具有白粉病抗性，同时筛选到4株含有偏凸山羊草和簇毛麦遗传物质并对条锈病和白粉病兼抗的材料，证明来自偏凸山羊草6Mv染色体的条锈病抗性与来自簇毛麦端体的白粉病抗性已经聚合在一起，且没有产生相互抑制的作用，暗示通过这两个抗性基因的聚合是完全能获得兼抗条锈病和白粉病的小麦新种质。 3. 对Moisson 6Mv/6B在减数分裂时期的成株进行总剂量为6Gy、辐射频率为120rad/min的60Co-γ射线辐射，对辐射植株自交后代进行农艺性状及根尖细胞有丝分裂中期染色体形态观察和条锈病抗性鉴定。结果为辐射植株自交结实率为2.22%，根尖细胞有丝分裂中期的染色体存在明显碎片，辐射自交后代植株对条锈病具有成株期抗性。 小麦—偏凸山羊草6Mv/6B代换系对条锈病抗性稳定，是培育条锈病抗性品种的良好供体。本研究证明在四川小麦背景中要利用该品种抗性，在结实数满足需要时，可将其作父本，亦可作母本，但关键是要选择好一个优良的受体基因型；同时其条锈病抗性与来自簇毛麦的白粉病抗性没有相互抑制作用，可将两者抗性有效聚合用于小麦育种中。 Wheat stripe rust (Puccinia striiformis f. sp. Tritici) is a worldwide disease of wheat, and could lead to victims of 30 percent or even total destruction of wheat production. Wheat stripe rust harms badly in China's southwest and North China. Sichuan province is one of the regions damaged by wheat stripe rust heavily. The use of resistant varieties is the most secure and economical way to control the wheat stripe rust. Therefore, it is essential to identify new disease-resistant genes and genetically research of disease resistance. Aegilops ventricosa (DDMvMv, 2n = 28) is an annual herbaceous plant, originating in the coastal areas of the western Mediterranean, with good characters such as resistance of wheat powdery, rust, salt, cold and high protein content. It is a good germplasm resource. In this study, the wheat- Aegilops ventricosa 6Mv/6B substitution line Moisson 6Mv/6B (highly resistant to the wheat stripe rust) was used to study on the transmission of chromosome 6Mv of Aegilops ventricosa in different genetic background of Sichuan wheat varieties, hybridization with wheat- Haynaldia villosa ditelosomic addition line Pana (highly resistant to the powdery mildew) and screening of wheat- Aegilops ventricosa translocation line by exposuring Moisson 6Mv/6B under ionizing radiation. The main results are as following: 1. Moisson 6Mv/6B was crossed with Sichuan wheat varieties mianyang26, mianyang93-124 and SW3243 (highly susceptible to stripe rust), respectively. Their F1 hybrids were further backcrossed as male and female to corresponding wheat varieties. The seed-setting rate, chromosomes confirmation in the mitotic metaphase of root tip cells, and resistance to stripe rust of the subsequent BC1 and F2 plants were investigated. The average seed-setting rate of backcross via 6Mv as female donor (83.10%) was higher than that of backcross via 6Mv as male donor (48.61%), suggesting that the seed-setting rate was associated with the wheat genotypes（χ2=34.15>>χ20.05=5.99（df=2））. In all analyzed populations, transmission frequencies of chromosome 6Mv were not correlated with the ways of 6Mv through male or through female. However, transmission frequencies of chromosome 6Mv were significantly correlated with Sichuan wheat genotypes（χ2=6.42>χ20.05=5.99（df=2））. 2. To aggregating the resistances to stripe rust and powdery mildew, as well as research on the resistance reactions in different genetic background, Moisson 6Mv/6B was reciprocally hybrided with the wheat- Haynaldia villosa ditelosomic addition line Pana (highly resistant to the powdery mildew). The seed-setting rate, agronomic characters, genomic in situ hybridization (GISH) of hybrid progenies，and resistances to stripe rust and powdery mildew were investigated. The results showed that the seed-setting rate of hybridization via Moisson 6Mv/6B as female donor (80.56%) was significant higher than that via Pana as female donor (58.33%). The seed-setting rate was associated with the hybrid methods (χ2 = 4.96> χ20.05 = 3.84 (df = 1)). The plant height of hybrid progenies was about 10 cm higher than Pana, the parent with maximum height. And the maturity of hybrid progenies was about two weeks earlier than that of the parents. In the hybrid progenies, the plants with the 6Mv chromosome have the resistance to stripe rust and the plants with the telosome from Haynaldia villosa have the resistance to powdery mildew. It was found that four plants with both the 6Mv chromosome and the telosome from Haynaldia villosa were resistant to stripe rust and powdery mildew. It indicated that the resistance to stripe rust and powdery mildew aggregated, and no mutual inhibition was found. It implied that the aggregation of the two resistance genes was able to provide the new wheat germplasm with the resistances to stripe rust and powdery mildew. 3. Moisson 6Mv/6B was irradiated with 60Co-γ rays of 6Gy (120rad/min) during meiosis. The agronomic characters and chromosomes confirmation in the mitotic metaphase of root tip cells，as well as resistance to stripe rust were investigated. The seed-setting rate of irradiated plants was only 2.22%. The chromosomes in mitotic metaphase had clear fragments. The resistance to stripe rust of progeny of irradiated plants was the adult-plant resistance. The wheat- Aegilops ventricosa 6Mv/6B substitution line is a good stripe rust resistance donor for its stabile resistance. Our study demonstrated that the key for use the resistance is to choose a good receptor. There is no difference between Moisson 6Mv/6B be the female and be the male if the seed number meets the requirement. At the same time, the stripe rust resistance of Moisson 6Mv/6B did not have the mutual inhibition with the powdery mildew resistance from Haynaldia villosa. It is able to aggregate the two resistances for wheat breeding.

Low conductance injection tubes for storage cell targets

The effect of adding internal fins to the injection tube of a storage cell target filled with a polarized atomic beam source has been studied. The tube conductance and the atomic beam intensity at the exit of the injection tube have been measured, observing an unexpectedly large beam loss. Simulations of the atomic beam reproduce the observed attenuation only when the non-zero azimuthal component of the atom's velocity is taken into account.

Cross-correlation of excitation functions for different fragments and different scattering angles in Al-27(F-19, x)y reactions

Excitation functions have been measured for different projectile-like fragments produced in Al-27(F-19,x)y reactions at incident energies from 110.25 to 118.75 MeV in 250 keV steps. Strong cross section fluctuations of the excitation functions are observed. The cross- correlation coefficients of the excitation functions for different atomic number Z and for different scattering angle theta(cm) have been deduced. These coefficients are much larger than the statistical theoretical calculated ones. This indicates that there are strong correlations between different exit channels in the dissipative heavy ion Collision of Al-27(F-19,x)y.