It was never good world sence minister must have wyves”: clerical celibacy, clerical marriage, and anticlericalism in Reformation England

The impact of the Reformation was felt strongly in the nature and character of the priesthood, and in the function and reputation of the priest. A shift in the understanding of the priesthood was one of the most tangible manifestations of doctrinal change, evident in the physical arrangement of the church, in the language of the liturgy, and in the relaxation of the discipline of celibacy, which had for centuries bound priests in the Latin tradition to a life of perpetual continence. Clerical celibacy, and accusations of clerical incontinence, featured prominently in evangelical criticisms of the Catholic church and priesthood, which made a good deal of polemical capital out of the perceived relationship of the priest and the efficacy of his sacred function. Citing St Paul, Protestant polemicists presented clerical marriage as the only, and appropriate remedy, for priestly immorality. But did the advent of a married priesthood create more problems than it solved? The polemical certainties that informed evangelical writing on sacerdotal celibacy did not guarantee the immediate acceptance of a married priesthood, and the vocabulary that had been used to denounce clergy who failed in their obligation to celibacy was all too readily turned against the married clergy. The anti-clerical lexicon, and its usage, remained remarkably static despite the substantial doctrinal and practical challenges posed to the traditional model of priesthood by the Protestant Reformation.

Influence of light guide tip used in the photo-activation on degree of conversion and hardness of one nanofilled dental composite

The aim of this study was to evaluate the degree of conversion and hardness of a dental composite resin Filtek (TM) Z-350 (3M ESPE, Dental Products St. Paul, MN) photo-activated for 20 s of irradiation time with two different light guide tips, metal and polymer, coupled on blue LED Ultraled LCU (Dabi Atlante, SP, Brazil). With the metal light tip, power density was of 352 and with the polymer was of 456 mW/cm(2), respectively. Five samples (4 mm in diameter and 2mm in thickness-ISO 4049), were made for each Group evaluated. The measurements for DC (%) were made in a Nexus-470 FT-IR, Thermo Nicolet, E.U.A. Spectroscopy (FTIR). Spectra for both uncured and cured samples were analyzed using an accessory of reflectance diffuse. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300-4000 cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm(-1)) against internal standard before and after curing of the sample: aromatic C-C (peak at 1610 cm(-1)). The Vickers hardness measurements (top and bottom surfaces) were performed in a universal testing machine (Buehler MMT-3 digital microhardness tester Lake Bluff, Illinois USA). A 50 gf load was used and the indenter with a dwell time of 30 s. The data were submitted to the test t Student at significance level of 5%. The mean values of degree of conversion for the polymer and metal light guide tip no were statistically different (p = 0.8389). The hardness mean values were no statistically significant different among the light guide tips (p = 0.6244), however, there was difference between top and bottom surfaces (p < 0.001). The results show that so much the polymer light tip as the metal light tip can be used for the photo-activation, probably for the low quality of the light guide tip metal.

Bond Strength and Etching Pattern of Adhesive Systems to Enamel: Effects of Conditioning Time and Enamel Preparation

Statement of the problem: The performance of self-etch systems on enamel is controversial and seems to be dependent on the application technique and the enamel preparation. Purpose of the Study: To examine the effects of conditioning time and enamel surface preparation on bond strength and etching pattern of adhesive systems to enamel. Materials and Methods: Ninety-six teeth were divided into 16 conditions (N = 6) in function of enamel preparation and conditioning time for bond strength test. The adhesive systems OptiBond FL (Kerr, Orange, CA, USA), OptiBond SOLO Plus (Kerr), Clearfil SE Bond (Kuraray, Osaka, Japan), and Adper Prompt L-Pop (3M ESPE, St. Paul, MN, USA) were applied on unground or ground enamel following the manufacturers` directions or doubling the conditioning time. Cylinders of Filtek Flow (0.5-mm height) were applied to each bonded enamel surface using a Tygon tube (0.7 mm in diameter; Saint-Gobain Corp., Aurora, OH, USA). After storage (24 h/37 degrees C), the specimens were subjected to shear force (0.5 mm/min). The data were treated by a three-way analysis of variance and Tukey`s test (alpha = 0.05). The failure modes of the debonded interfaces and the etching pattern of adhesives were observed using scanning electron microscopy. Results: Only the main factor ""adhesive"" was statistically significant (p < 0.001). The lowest bond strength value was observed for OptiBond FL. The most defined etching pattern was observed for 35% phosphoric acid and for Adper Prompt L-Pop. Mixed failures were observed for all adhesives, but OptiBond FL showed cohesive failures in resin predominantly. Conclusions: The increase in the conditioning time as well as the enamel pretreatment did not provide an increase in the resin-enamel bond strength values for the studied adhesives. CLINICAL SIGNIFICANCE The surface enamel preparation and the conditioning time do not affect the performance of self-etch systems to enamel. (J Esthet Restor Dent 20:322-336, 2008)

Effect of citrus sudden death on yield and quality of sweet orange cultivars in Brazil

Citrus sudden death (CSD) has greatly affected sweet orange cultivars grafted on Rangpur lime in São Paulo and Minas Gerais States, Brazil. To characterize and quantify CSD damage, fruit yield and quality were assessed in each combination of sweet orange cultivar (Hamlin, Pera, Natal, and Valencia), age class (3 to 5, 6 to 10, and 11 to 15 years old), and CSD severity class (0 = no symptom, 1 = initial symptoms, and 2 = severe symptoms). For each combination, 10 trees were harvested and 20 fruit were taken for quality analysis. Damage was characterized by reduc_ tion of: (i) total weight of fruit/tree (36 and 67% for severity class 1 and 2, respectively), (ii) number of fruit/tree (27 and 55%), (iii) fruit size (13 and 25% in diameter and height [stem to styler distance]), (iv) fruit weight (32 and 56%), (v) total soluble solids (TSS)/fruit (18 and 42%), and increase of (vi) Brix (14 and 34%), (vii) acidity (16 and 41%), and (viii) TSS/90-1b. box (21 and 33%). There was no alteration on Brix/acidity ratio and percentage of juice on fruit of affected trees. Sweet orange cultivars did not differ in percentage of reduction or increase of all yield and quality variables, with the exception of Pera, which expressed increases of Brix and acidity. For more severe affected trees, the youngest plants showed a higher reduction in fruit number/tree, whereas plants 6 to 10 years old showed a higher increase in fruit acidity and TSS/box. However, no differences in percentage of reduction or increase for other variables were observed among different age classes. The damage to the above probably was associated with reduced water absorption capacity of CSD-affected trees.

Effect of steeping conditions (sulfur dioxide, lactic acid, and temperature) on starch yield, starch quality, and germ quality from the Intermittent Milling and Dynamic Steeping process (IMDS) for a Brazilian corn hybrid

Effect of lactic acid, SO2, temperature, and their interactions were assessed on the dynamic steeping of a Brazilian dent corn (hybrid XL 606) to determine the ideal relationship among these variables to improve the wet-milling process for starch and corn by-products production. A 2x2x3 factorial experimental design was used with SO2 levels of 0.05 and 0.1% (w/v), lactic acid levels of 0 and 0.5% (v/v), and temperatures of 52, 60, and 68degreesC. Starch yield was used as deciding factor to choose the best treatment. Lactic acid added in the steep solution improved the starch yield by an average of 5.6 percentage points. SO2 was more available to break down the structural protein network at 0.1% than at the 0.05% level. Starch-gluten separation was difficult at 68degreesC. The lactic acid and SO2 concentrations and steeping temperatures for better starch recovery were 0.5, 0.1, and 52degreesC, respectively. The Intermittent Milling and Dynamic Steeping (IMDS) process produced, on average, 1.4% more starch than the conventional 36- hr steeping process. Protein in starch, oil content in germ, and germ damage were used as quality factors. Total steep time can be reduced from 36 hr for conventional wet-milling to 8 hr for the IMDS process.

Molecular and biological characterization of Lettuce mosaic virus (LMV) isolates reveals a distinct and widespread type of resistance-breaking isolate: LMV-Most

Lettuce mosaic virus (LMV) causes an economically important seedborne and aphid-transmitted disease of lettuce and ornamental crops worldwide. The genetic diversity among 73 LMV isolates was examined based on a 216-nucleotide sequence at the variable region encoding the NIb-coat protein junction, Three clusters of LMV isolates were distinguished: LMV-Yar, LMV-Greck, and LMV-RoW. In the latter cluster, two subgroups of isolates, LMV-Common and LMV-Most, accounted for a large proportion of the LMV isolates analyzed. These two subgroups included the seedborne isolates, consistent with this property contributing a selective advantage and resulting in widespread distribution. In addition to being seedborne, LMV-Most isolates overcome the two resistance genes commonly used in lettuce, mol(1) and mol(2), and thus represent a potential threat to lettuce cultivation. The complete sequence of an LMV-Most isolate (LMV-AF199) was determined, allowing a better definition of the genetic relationships among LMV-Most, LMV-Common, and an additional isolate of the LMV-RoW cluster.

Divergence Between Sympatric Rice- and Maize-Infecting Populations of Rhizoctonia solani AG-1 IA from Latin America

The basidiomycetous fungus, Rhizoctonia solani anastomosis group (AG)-1 IA is a major pathogen in Latin America causing sheath blight (SB) of rice Particularly in Venezuela. the fungus also Causes banded leaf and sheath blight (BLSB) oil maize, which is considered all emerging disease problem where maize replaced traditional rice-cropping areas or is now planted in adjacent. fields Our goals in this study Were 10 elucidate (i) the effects of host specialization on gene flow between sympatric and allopatric rice and maize-infecting fungal populations and (ii) the reproductive mode of the fungus, looking for evidence of recombination in total, 375 isolates of R. solani AG1 IA sampled from three sympatric rice and maize fields in Venezuela (Porutuguesa State) and two allopatric rice fields from Colombia (Meta State) and Panama (Chiriqui State) were genotyped Using, 10 microsatellite loci Allopatric populations from Venezuela. Colombia. and Panama were significantly differentiated (Phi(ST), of 0 16 to 0 34). Partitioning of the genetic diversity indicated differentiation between sympatric populations from different host species, with 17% of the total genetic variation distributed between hosts while only 3 to 6% wits distributed geographically among the sympatric Venezuelan Fields We detected symmetrical historical migration between the rice- and the maize-infecting populations from Venezuela Rice- and maize-derived isolates were able to infect built rice and maize but were more aggressive Oil their original hosts, consistent with host specialization. Because the maize- and rice-infecting populations are still cross-pathogenic, we postulate that the genetic differentiation was relatively recent and mediated via a host shift. An isolation with nu.-ration analysis indicated that the maize-infecting population diverged from the rice-infecting population between 40 and 240 years ago Our findings also suggest that maize-infecting Populations have a mainly recombining reproductive system whereas the rice-infecting Populations have a Mixed reproductive system in Latin America

Divergence Between Sympatric Rice- and Soybean-Infecting Populations of Rhizoctonia solani Anastomosis Group-1 IA

Rhizoctonia solani anastomosis group (AG)-1 IA causes soybean foliar blighting (aerial blight) and rice sheath blight diseases. Although taxonomically related within the AG-1 complex, sister populations of R. solani AG-1 IA infecting Poaceae (rice) and Fabaceae (soybean) are genetically distinct based on internal transcribed spacer rDNA. However, there is Currently no information available regarding the extent of genetic differentiation and host specialization between rice- and soybean-infecting populations of R. solani AG-1 IA. We used 10 microsatellite loci to compare sympatric R. solani AG-1 IA populations infecting rice and soybeans in Louisiana and one allopatric rice-infecting population from Texas. None of the 154 multilocus genotypes found among the 223 isolates were shared among the three populations. Partitioning of genetic diversity showed significant differentiation among sympatric populations from different host Species (Phi(ST) = 0.39 to 0.41). Historical migration patterns between sympatric rice- and soybean-infecting populations from Louisiana were asymmetrical. Rice- and soybean-derived isolates of R. solani AG-1 IA were able to infect both rice and soybean, but were significantly more aggressive on their host of on-in, consistent with host specialization. The soybean-infecting Population from Louisiana was more clonal than the sympatric rice-infecting population. Most of the loci in the soybean-infecting populations were Out of Hardy-Weinberg equilibrium (HWE.), but the sympatric rice-infecting population from Louisiana was mainly in HWE. All populations presented evidence for a mixed reproductive system.

Effect of Artificial Aging on the Roughness and Microhardness of Sealed Composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short-term evaluation of the pulpo-dentin complex response to a resin-modified glass-ionomer cement and a bonding agent applied in deep cavities

Objectives. To evaluate the response of the pulpo-dentin complex following application of a resin-modified glass-ionomer cement or an adhesive system in deep cavities performed in human teeth.Methods. Deep class V cavities were prepared on the buccal surface of 26 premolars. In Group I the cavity walls (dentin) and enamel were conditioned with 32% phosphoric acid and the dentin adhesive system One Step (Bisco, Inc., Itasca, IL, USA) was applied. In Groups 2 and 3, before total etching and application of bonding agent, the cavity floor was lined with the resin-modified glass-ionomer cement-Vitrebond (3M ESPE Dental Products Division, St. Paul, MN, USA) or the calcium hydroxide cement-Dycal (control group, Dentsply, Mildford, DE, USA), respectively. The cavities were restored using light-cured Z-100 composite resin (3M ESPE). The teeth were extracted between 5 and 30 days and prepared for microscopic assessment. Serial sections were stained with H/E, Masson's trichrome, and Brown and Brenn techniques.Results. In Group 1, the inflammatory response was more evident than in Groups 2 and 3. Diffusion of dental material components across dentinal tubules was observed only in Group 1, in which the intensity of the pulp response increased as the remaining dentin thickness decreased. Bacteria were evidenced in the lateral walls of two samples (Group 2) which exhibited no inflammatory response or tissue disorganization.Conclusions. Based on the experimental conditions, it was concluded total acid etching followed by application of One Step bonding agent cannot be recommended as adequate procedures. In this clinical condition the cavity walls should be lined with a biocompatible dental material, such as Vitrebond or Dycal. 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of light guide tip used in the photo-activation on degree of conversion and hardness of one nanofilled dental composite

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Proteomic analysis reveals suppression of bark chitinases and proteinase inhibitors in citrus plants affected by the citrus sudden death disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)