Comparando a saúde no Brasil com os países da OCDE: explorando dados de saúde pública

A atenção à saúde da população no Brasil gera um grande volume de dados sobre os serviços de saúde prestados. O tratamento adequado destes dados com técnicas de acesso à grande massa de dados pode permitir a extração de informações importantes para um melhor conhecimento do setor saúde. Avaliar o desempenho dos sistemas de saúde através da utilização da massa de dados produzida tem sido uma tendência mundial, uma vez que vários países já mantêm programas de avaliação baseados em dados e indicadores. Neste contexto, A OCDE – Organização para Cooperação e Desenvolvimento Econômico, que é uma organização internacional que avalia as políticas econômicas de seus 34 países membros, possui uma publicação bienal, chamada Health at a Glance, que tem por objetivo fazer a comparação dos sistemas de saúde dos países membros da OCDE. Embora o Brasil não seja um membro, a OCDE procura incluí-lo no cálculo de alguns indicadores, quando os dados estão disponíveis, pois considera o Brasil como uma das maiores economias que não é um país membro. O presente estudo tem por objetivo propor e implementar, com base na metodologia da publicação Health at a Glance de 2015, o cálculo para o Brasil de 22 indicadores em saúde que compõem o domínio “utilização de serviços em saúde” da publicação da OCDE. Para isto foi feito um levantamento das principais bases de dados nacionais em saúde disponíveis que posteriormente foram capturadas, conforme necessidade, através de técnicas para acessar e tratar o grande volume de dados em saúde no Brasil. As bases de dados utilizadas são provenientes de três principais fontes remuneração: SUS, planos privados de saúde e outras fontes de remuneração como, por exemplo, planos públicos de saúde, DPVAT e particular. A realização deste trabalho permitiu verificar que os dados em saúde disponíveis publicamente no Brasil podem ser usados na avaliação do desempenho do sistema de saúde, e além de incluir o Brasil no benchmark internacional dos países da OCDE nestes 22 indicadores, promoveu a comparação destes indicadores entre o setor público de saúde do Brasil, o SUS, e o setor de planos privados de saúde, a chamada saúde suplementar. Além disso, também foi possível comparar os indicadores calculados para o SUS para cada UF, demonstrando assim as diferenças na prestação de serviços de saúde nos estados do Brasil para o setor público. A análise dos resultados demonstrou que, em geral, o Brasil comparado com os países da OCDE apresenta um desempenho abaixo da média dos demais países, o que indica necessidade de esforços para atingir um nível mais alto na prestação de serviços em saúde que estão no âmbito de avaliação dos indicadores calculados. Quando segmentado entre SUS e saúde suplementar, a análise dos resultados dos indicadores do Brasil aponta para uma aproximação do desempenho do setor de saúde suplementar em relação à média dos demais países da OCDE, e por outro lado um distanciamento do SUS em relação a esta média. Isto evidencia a diferença no nível de prestação de serviços dentro do Brasil entre o SUS e a saúde suplementar. Por fim, como proposta de melhoria na qualidade dos resultados obtidos neste estudo sugere-se o uso da base de dados do TISS/ANS para as informações provenientes do setor de saúde suplementar, uma vez que o TISS reflete toda a troca de informações entre os prestadores de serviços de saúde e as operadoras de planos privados de saúde para fins de pagamento dos serviços prestados.

Variações em trajetórias de acumulação de capacidades tecnológicas em nível intra-empresarial: uma análise empírica da VALE S.A.

Esta tese relaciona-se ao tema da acumulação de capacidades tecnológicas em nível de empresa, suas fontes (mecanismos de aprendizagem) e suas implicações para a performance competitiva empresarial, em indústrias relacionadas a recursos naturais no contexto de economias emergentes. Durante os últimos 40 anos muito se avançou no campo da pesquisa sobre acumulação de capacidades tecnológicas em nível de empresas em economias emergentes. Porém, ainda há importantes lacunas a serem exploradas particularmente em relação a natureza e dinâmica de trajetórias de acumulação de capacidades tecnológicas intra-empresariais, no contexto de indústrias relacionadas a recursos naturais, especialmente na mineração. O objetivo da pesquisa aqui reportada é contribuir para minimizar esta lacuna. Particularmente, esta tese explora variações intra-empresariais de trajetórias de acumulação de capacidades tecnológicas, suas fontes (mecanismos subjacentes de aprendizagem) e algumas implicações que são geradas para a performance competitiva da empresa, no âmbito da indústria de mineração no Brasil, especificamente na empresa mineradora Vale, no período entre 1942 e 2015. Para alcançar este objetivo, a pesquisa apoia-se na combinação das literaturas de acumulação de capacidade tecnológica, inovação, aprendizagem e desenvolvimento industrial para a construção da base conceitual. Em paralelo, a pesquisa vale-se de um desenho de pesquisa qualitativo e indutivo baseado em evidências primárias com base em extensivos trabalhos de campo. Esse desenho de pesquisa é operacionalizado a partir de um estudo de caso individual em profundidade na Vale, no âmbito de três grandes áreas tecnológicas: prospecção e pesquisa mineral, lavra, e processamento mineral. Por meio da implementação dessa estratégia, a pesquisa encontrou: (1) Trajetórias de acumulação de capacidades tecnológicas relativamente distintas entre as três áreas de análise. Especificamente: (i) na área de prospecção e pesquisa mineral observou-se uma trajetória de seguidora tecnológica que alcança posição de liderança mundial em inovação e produção; (ii) na área de lavra também evidenciou-se uma trajetória de seguidora tecnológica que alcança posição de liderança mundial em inovação e produção, porém, com acumulação tardia de capacidades tecnológicas; e (iii) na área de processamento mineral houve o alcance precoce de posição de liderança mundial em inovação e produção a partir da criação de uma trajetória distinta da já mapeada pelos líderes globais. As trajetórias de acumulação de capacidades tecnológicas convergem para uma situação similar a partir de 2011 quando as três áreas apresentaram posição de liderança mundial em inovação e ao mesmo tempo demonstraram indícios de entrada em um processo de estagnação, que restringe as oportunidades de entrada em novas trajetórias tecnológicas e de entrada em novos negócios. (2) As variações encontradas nas trajetórias de acumulação de capacidades tecnológicas são explicadas pela maneira pela qual diferentes mecanismos subjacentes de aprendizagem foram combinados e utilizados pela empresa. Foram encontradas quatro combinações de mecanismos de aprendizagem que contribuíram para explicar as diferentes direções das trajetórias de acumulação de capacidades tecnológicas. (3) As variações nas três trajetórias de acumulação de capacidades tecnológicas geraram implicações distintas para a performance competitiva, mais especificamente em termos de performance inovadora, operacional/ambiental e de novos negócios. Os resultados da pesquisa geram contribuições para o entendimento do relacionamento intra-empresarial entre acumulação de capacidades tecnológicas e os mecanismos de aprendizagem subjacentes. E contribuem para o entendimento da mineração como uma indústria que oferece oportunidades para inovações significativas que, inclusive podem implicar na diversificação do tecido industrial nacional. Portanto, tal indústria deve receber atenção especial por parte de decisores de políticas públicas e de ações empresariais para evitar que empresas com alto potencial inovativo desconstruam suas capacidades inovadoras e consequentemente limitem seus impactos para o desenvolvimento tecnológico e econômico no contexto de economias emergentes.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Estudo da adição do resíduo proveniente da extração de minério de ferro em argilas do Rio Grande do Norte

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Desenvolvimento, pobreza e meio ambiente no seridó potiguar: um estudo centrado nas micro-regiões do seridó oriental e ocidental

This research work intends to carry out a study focused on the dynamic between development, poverty reduction and conservation of natural resources. To consider this relationship to the region chosen was the micro-region of Eastern and Western Seridó in the state of Rio Grande do Norte. In recent years, several studies (Araújo, 2011; BASTOS, 2009) have pointed out that after a period of economic crisis in its tripodproductive, formed by the activities of farming, cotton farming, mining and faced in the eighties, this region of the State of Rio Grande do Norte, has not only shown signs of economic recovery but also improve their social indicators. On the other hand, studies of desertification as the view of the state of RN (produced in cooperation between the Government of RN and research institutions) and the Sustainable Development Plan of Seridó (ADES, 2000), indicate that there is an ongoing French process of degradation of natural resources that is capable of compromising the ability of sustaining such a system. To verify this reality and likely finding this relationship, this work is adopted for this study, the analysis of evolution of secondary data from official bodies such as the IBGE on HDI, per capita income and other social indicators between 2000 and 2009. Here is another time of the survey analysis of qualitative data collected from interviews with institutions of academic intervention in nature, researchers at the Federal University of Rio Grande do Norte (UFRN) State agencies that address the issue of the Middle Environment in Seridó: Institute for Sustainable Development of the NB (IDEMA) and the Brazilian Institute of Environment and the Amazon (IBAMA) and institutions of direct intervention in the region, as the Agency's Sustainable Development Seridó (adhesive) and the Joint Semi-Arid (ASA). After crossing data from quantitative and qualitative, it was found that the dynamics of the region's economic Seridó Potiguar partially answers the improvement of social indicators of poverty. Contribution by the State in this shared stock transfer income. Regarding the influence of productive restructuring in the region on issues of environment, it is noted that the ceramic tile industry, responsible for the absorption percentage of the population with limited ingress into the urban economy, given the low education, accounts for the increase of susceptibility to the ongoing process of desertification in North Seridó Rio Grande. We conclude finally that the guarantee of increased income, freedom and conservation of natural resources ensures primarily by changing the beliefs and values, especially on the part of the business sector, which use natural resources so predatory, aimed at maintaining their rates of return on investment. And concomitantly, the synchronization between technological change, through the use of new energy sources, and institutional change.

Emprego de redes neurais artificiais supervisionadas e não supervisionadas no estudo de parâmetros reológicos de excipientes farmacêuticos sólidos

In this paper artificial neural network (ANN) based on supervised and unsupervised algorithms were investigated for use in the study of rheological parameters of solid pharmaceutical excipients, in order to develop computational tools for manufacturing solid dosage forms. Among four supervised neural networks investigated, the best learning performance was achieved by a feedfoward multilayer perceptron whose architectures was composed by eight neurons in the input layer, sixteen neurons in the hidden layer and one neuron in the output layer. Learning and predictive performance relative to repose angle was poor while to Carr index and Hausner ratio (CI and HR, respectively) showed very good fitting capacity and learning, therefore HR and CI were considered suitable descriptors for the next stage of development of supervised ANNs. Clustering capacity was evaluated for five unsupervised strategies. Network based on purely unsupervised competitive strategies, classic "Winner-Take-All", "Frequency-Sensitive Competitive Learning" and "Rival-Penalize Competitive Learning" (WTA, FSCL and RPCL, respectively) were able to perform clustering from database, however this classification was very poor, showing severe classification errors by grouping data with conflicting properties into the same cluster or even the same neuron. On the other hand it could not be established what was the criteria adopted by the neural network for those clustering. Self-Organizing Maps (SOM) and Neural Gas (NG) networks showed better clustering capacity. Both have recognized the two major groupings of data corresponding to lactose (LAC) and cellulose (CEL). However, SOM showed some errors in classify data from minority excipients, magnesium stearate (EMG) , talc (TLC) and attapulgite (ATP). NG network in turn performed a very consistent classification of data and solve the misclassification of SOM, being the most appropriate network for classifying data of the study. The use of NG network in pharmaceutical technology was still unpublished. NG therefore has great potential for use in the development of software for use in automated classification systems of pharmaceutical powders and as a new tool for mining and clustering data in drug development