953 resultados para Metodologia Q.
Resumo:
This works describes the use of experimental design and surface response methodology for optimization of saponin extraction from Ampelozizyphus amazonicus. For this purpose, a method employing extraction based on maceration assisted by ultrasound technique was utilized. The following factors were studied: extraction length of time and solvent composition. The total saponin was determined by using a gravimetric method and the results expressed by their relative proportion to total crude extract. For the specific condition, 60% hydro-alcoholic solution and 18 minutes extraction length of time has shown the best results. This method can be useful for extraction of substances with biological importance
Resumo:
The influence of temperature, storage time and the addition of hydrochloride L-cysteine in the preservation of the fungicide mancozeb was studied under field conditions in the surface layer of a Cambisol collected in an area planted with cabbage in Nova Friburgo - RJ, Brazil. The results of this study showed an efficiency of up to 42% in the preservation of the fungicide in the samples treated with cysteine and stored at low temperatures compared to those not treated and kept at room temperature
Resumo:
Ajankohtaista
Resumo:
The development of analytical procedures to evaluate transesterification process is still a challenge in biodiesel production. Then, this paper shows an electroanalytical methodology to transesterification process assessment, proposing the application of nanostructured TiO2 electrodes. The results showed, for sunflower oil - methanol reaction catalyzed by KOH, a reduction peak in - 1050 mV and the gradual appearance of a second peak at - 1160 mV. This peak was observed as originated by the transesterification process and is probably related to intermediates. By measuring the intensity of this peak a kinetic profile was determined, showing that the conversion is almost finished in 2 h.
Resumo:
The present research aimed to study the parameters that affect the determination of estrogens in sewage upon the use of SPE and determination by using gas chromatography mass spectrometry (GC/MS). The study evaluated the stabilization pond technology with regard to estrogens removal. The results showed that the methodology was able to identify and quantify the estrogens E1, E2, E2-17A and EE2 in sewage. Moreover, the estrogens sometimes were not removed in the stabilization pond, showing that even the high hydraulic retention time (HRT) and high sunlight intensity were not enough to degrade these compounds completely during load peaks.
Resumo:
In this paper, we describe an educational experience involving the use of the jigsaw method on the Medicinal Chemistry course at the University of São Paulo, Brazil. The goal of this proposal was to investigate acceptance and contributions of the method to undergraduate chemistry teaching. Feedback on the jigsaw method collected from the focus groups and questionnaires showed that participants generally acknowledged the advantages of the jigsaw method in helping them learn the Medicinal Chemistry subject. Suggestions for improving the jigsaw method were also received from participants.
Resumo:
This work aimed to adapt the analysis of methemoglobin recommended by Evelyn - Malloy (visible spectrophotometry), in order to facilitate its application in the field, or to analysis in clinical laboratory, of existing sites of diflubenzuron application. The parameters changed included: centrifuge rotation speed; time between the collection of biological sample and analysis, and storage temperature of the samples; and the volume of reagents. The comparison of the rotation speed (rpm) of the reference methodology with the rpm of a "clinical centrifuge" did not reveal a statistically significant difference in the levels of methemoglobin. The time between the collection of biological sample and analysis was extended for a period of up to 48 hours for both conservation by refrigeration and ambient temperature, producing no statistically significant difference when compared to the standard duration of 2 hours. Regarding the reagents, the reference methodology already uses the volume necessary to ensure complete reaction, whereas a wider range from the recommended volume to a 5-fold reduction in comparison to the reference methodology could be used. It was concluded that the proposed changes to the methodology for adapting the analysis are applicable to studies of field / workplace exposure and ensure the reliability of results. The adapted methodology was inter-laboratory validated and the parameters changed can be selected according to the requirements of the laboratory at which the methemoglobin is to be measured.
Resumo:
Objetivou-se verificar o efeito da luz sobre o crescimento micelial de Fusarium moniliforme em meio de cultura contendo fungicidas, o melhor regime luminoso e a variável a ser utilizada para detectar o patógeno em sementes tratadas de milho (Zea mays), e o efeito do tratamento sobre a qualidade sanitária e fisiológica das sementes. Os fungicidas avaliados foram fludioxonil + metalaxil-m (três concentrações), difenoconazole, acibenzolar-S-metílico e captan + tiabendazole. Para avaliação do crescimento micelial, os fungicidas foram adicionados em meio de cultura, nas concentrações de 100, 10 e 1 æg/ml. Incubaram-se as placas sob temperatura de 20±2 ºC e três condições de luz: escuro contínuo, luz branca e luz próxima da ultra violeta (12h de luz/12 de escuro). Para verificar o efeito da luz na avaliação das sementes tratadas, utilizou-se o método do papel de filtro com congelamento; a sanidade foi avaliada pelas variáveis incidência e severidade. Duas amostras de sementes tratadas foram submetidas aos testes de sanidade, germinação, emergência em casa de vegetação e frio, para verificar o efeito do tratamento sobre a qualidade sanitária e fisiológica. O teste in vitro indicou que a luz branca diminuiu o efeito dos ingredientes ativos fludioxonil + metalaxil-m (7,5 g + 11,51 g/l e 25 g + 10 g/l) e captan + tiabendazole; no teste de sanidade não se observou esse efeito. A severidade foi mais sensível para discriminar a eficiência dos fungicidas. Os resultados obtidos, avaliando-se as amostras de sementes tratadas, demonstraram que: F. moniliforme não afeta a qualidade fisiológica dessas sementes; o fungicida que ofereceu controle do patógeno na semente, acima de 90%, foi captan + tiabendazole, seguido de fludioxonil + metalaxil-m (97,2 g + 147,86 g/l); Pythium sp. foi controlado por captan + tiabendazole e por fludioxonil + metalaxil-m nas três concentrações.
Resumo:
Objetivou-se no presente trabalho caracterizar o progresso espaço-temporal da severidade da antracnose do feijoeiro comum e da ramulose do algodoeiro por meio da Geoestatística. Os experimentos foram conduzidos no campo, durante o período das águas, em diferentes épocas. Sementes inoculadas pelo método da restrição hídrica foram semeadas no centro de parcelas experimentais constituindo fonte de inóculo do tipo ponto. Foram realizadas semanalmente seis avaliações da severidade das doenças com base em escalas de notas. Pelos modelos de semivariograma isotrópicos esféricos e gaussianos ajustados aos dados, verificou-se o padrão de distribuição agregado e a dependência espacial de ambos os patossistemas. Com o mapeamento da severidade das doenças pelo método da krigagem ordinária em blocos, verificou-se menor severidade das doenças nos primeiros estádios, com aumento gradual ao longo do tempo. A antracnose apresentou formação inicial de focos de inóculo secundário, além do foco com inóculo inicial, que coalesceram com o tempo. A severidade da ramulose diminuiu gradualmente de forma radial e contínua do centro da parcela para as extremidades, com maior capacidade de infecção de plantas vizinhas, quando comparada à antracnose, possivelmente pela maior agressividade do patógeno e hábito de crescimento arbustivo do algodoeiro.
Resumo:
No presente trabalho desenvolveu-se metodologia simplificada para análise de hexametilenotetramina em medicamentos que apresentam corantes em sua formulação (azul de metileno, Ponceau Red, Bordeaux Red, acriflavina) seguida por titulação ácido-base usando indicador. O método foi aplicado com sucesso a amostras comerciais e os resultados obtidos foram comparados com aqueles encontrados por titulação potenciométrica, apresentando muito boa concordância. Recobrimentos situaram-se na faixa de 101,3 - 104,2%, com desvios padrão de 0,1 - 2,1.
Resumo:
O biopolímero poli(3-hidroxibutirato) PHB, importante pelas suas propriedades de biodegradabilidade e biocompatibilidade, pode apresentar melhores características termoplásticas quando estruturalmente modificado com anidrido maleico (AM). Para avaliar a proporção de anidrido maleico presente nos filmes de PHB com a proporção no intervalo de 0 a 20% de AM para o PHB, foram otimizadas as condições experimentais e determinados os principais parâmetros de validação para a análise simultânea de derivados de PHB e AM, utilizando-se cromatografia em fase gasosa (GC). Os resultados demonstram que o procedimento analítico pode ser aplicado com confiabilidade.