Avaliação radiográficada fusão das corticias lateral e medial do ramo mandibular: estudo em mandíbulas secas

Purpose: to radiographically evaluate the distance between mandibular lingula and the exact spot where buccal and lingual cortical bone plates merge in the mandibular ramus. Materials and Methods: 54 dry mandibles, divided into 3 subgroups (SG1: dentate, SG2: partially dentate and SG3: edentulous) were used in this study. Lingula position was marked with a metallic sphere and radiographs were taken. The distance between mandibular notch and lingula (I/L) and the distance between mandibular lingula and cortical bone plates fusion (L/FC) were measured. Statistical analysis was applied to the values obtained. Results: mean values for L/FC were 8,18mm, 7,30mm and 8,98mm for SG1, SG2 e SG3 respectively. Moreover, mean values for I/L were 14,02mm, 13,90mm and 12,34mm for SG1, SG 2 and SG3 respectively. The results also showed that cortical bone plates fusion took place in half I/L distance in 28,57% of the mandibles in SG1, in 46,67% of the mandibles in SG2 and in 9,09% of the pieces in SG3. Conclusions: there were no statistically significant differences in the height where cortical bone plates took place in all 3 subgroups. In SG3, the correlation between the mean value for L/FC and the mean value for I/L suggests a reduction in bone density and bone mass, which can correlate to the evaluation of older mandibles in this subgroup.

Manejo das fraturas nasais com manutenção das vias aéreas superiores

Nasal fractures are extremely frequent. The nasal bones are the third most frequently fractured bones in the human skeleton. This is due to their prominent position on the face and to the diminished bone thickness. As a result, weak forces can cause nasal fractures, while stronger forces can comminute the nasal bones. In general, assaults, falls and sports injuries are the etiologies most commonly involved in nasal trauma. The diagnosis of such fractures is basically clinical and their treatment is usually by closed reduction with good results reported in all the relevant literature. Thus, the aim of this paper is to report a modification of the closed reduction technique for the treatment of these fractures.

Análise clínica, tomográfica e histológica comparativa entre ha+β-tcp isolado ou associado a proteínas derivadas do esmalte utilizadas como enxertos após a elevação da membrana do seio maxilar e colocação de implantes: estudo piloto

The aim of this study was to evaluate the clinical, tomographic, and histological similarity within the use of HA+β-TCP (Boneceramic) alone or associated with enamel matrix derived (EMD) proteins in sinus lifting procedures with subsequent dental implant placement. We selected two patients with residual bony ridges between 3 mm and 5 mm in height in need of bone grafts. Six months later, eight implants were installed (two implants at each site). Biopsies were made, and the tissue was processed and stained with HE solution. Tomographic evaluation showed bone height gain up to 10.0 mm on average. Histology showed new bone formation for both groups, with similar bone density and trabecular interconnectivity. It can be concluded that the HA+β-TCP graft isolated or associated to EMD provided bone height gain in sinus lifting procedures, with similar clinical, tomographic and histological characteristics.

Incorporação de enxertos ósseos autógenos e homógenos em humanos: abordagem tomográfica

The objective of this study was to evaluate the remodeling of autologous and homologous bone grafts in humans, using tomographic images. For this, CT images from 10 patients (5 treated with autologous bone grafts and 5 treated with homologous bone grafts), made previously to the grafting procedures, and 14 and 180 days post operatory were evaluated regarding to bone height, width, and density, in a total of 19 bone blocks, 10 homologous and 9 autologous. Results showed similarities between the two tested materials regarding bone width and density. It can be concluded that the homologous bone presented, in a tomographic approach, after 180 days of follow-up, characteristics which can corroborate its use as a bone graft material, providing and sustaining a good bone volume for oral rehabilitation with dental implants.

Osteotomia sagital da crista alveolar para instalação de implantes Bicon

This case report presents details of a new surgical technique for mandibular ridge sagittal osteotomy and expansion associated to immediate dental implants in atrophic ridges. The bone atrophies represents a challenge for the surgeons that intends to modify this situation. In the past, the only viable option was the onlay bone graft. However, the bone graft requests a second surgical site that certainly increases the postoperative morbidity, without mentioning the longer treatment time required. The sagittal osteotomy of the alveolar crest represents a faster option, because it eliminates the time requested for bone graft integration, providing rehabilitation of edentulous areas with thin alveolar crests that otherwise would need additi onal surgical procedures for a satisfactory result. The authors report a clinical case in which this technique was used with the installation of a Bicon dental implant in the same surgical time, showing all the steps for this single-tooth rehabilitation.

Uso de um distrator ósseo dentoimplantossuportado, feito a partir de tornos expansores convencionais, na reabilitação oral

Osteodistraction is a clinical reality, available in the last decades for the resolution of large bone deficiencies, in cases that there are pre-existing, but misplaced implants and teeth. The aims of thearticle is to present a case report in which a new possibility for bone distraction, based on tooth-implant bone distractors, made from standard orthodontic expansion-screws, was used in an area where there was an extensive need of alveolar bone and aesthetical recovery, allied to teeth and dental implant misplacement. This technique presented good clinical results, associated to effective simplicity and low cost, becoming viable clinical solution for bone tissue augmentation and aesthetical optimization. In resume, it is possible to say that the suggested technique achieved its objectives, improving the hard and soft tissue profile, whilst allowing completion of oral rehabilitation.

Avaliação da espessura do osso parietal como região doadora de enxertos ósseos.

Introduction: The study of graft donor sites, whether from the anatomical, physiological or morphological point of view, has become a topic of current interest, due to the increasing number of patients needing facial bone reconstruction for various reasons. Purpose: In view of the need to constantly improve surgical techniques for autogenous bone graft harvesting, still considered the best choice for facial bone reconstruction, this paper describes an anatomical study on dry skulls in order to evaluate the average thickness of the parietal bone. Material and Methods: Measurements of this bone were taken with a goniometer, at four previously defined points, in the region that is often used as a donor site, in 49 dry skulls (98 parietal bones). The results were evaluated using the T test. Results: Thickness was measured at four predetermined points. The mean values (Point A = 4898mm, B = 4517mm, C = 6185mm, D = 4280mm) show that the bone can be even thinner than previously reported in the literature in other studies of the same nature. The largest bone thickness is in the medial and posterior region. Conclusion: A knowledge of these anatomical characteristics is helpful in preventing possible surgical complications, as well as making it safer for the surgeon to remove this graft and providing more information on whether or not to indicate this region as a bone graft donor site.

Aspectos biológico-celulares da osseointegração baseados nas superfícies de implantes

Osseointegration involves a cascade of biological events, which can be accelerated by modifying the micro and/or nanometric topography of dental implant surfaces. Considering that different treatment types modify the titanium surface giving it a more pronounced rough topography, and physicochemical changes that appear to positively influence the osseointegration process, a literature review was made on the main types of surface treatments and their influence on the biological and cellular aspects of osseointegration, with publications dating from 1969 until the present moment. Although the precise role of the implant surface on the osseointegration of dental implants is not completely clear, the specific effects of implant surface on bone regeneration, initial kinetics, and evolution of mechanical properties have shown to be quite promising. Thus, based on dental implant surface modifications, osseointegration can be defined as a process by which rigid asymptomatic fixation of an alloplastic material can be achieved and kept in close contact with bone tissue, being resistant to early and late functional loads. This process can be modulated by an appropriate treatment of the alloplastic material surface.

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Periapical Repair Following Endodontic Surgery: Two- andThree-Dimensional Imaging Evaluation Methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de fitases microbianas em dietas de frangos de corte

Pós-graduação em Zootecnia - FCAV

Comparação de diferentes técnicas cirúrgicas para osteossíntese de ílio em gatos: revisão sistemática

Aproximadamente 20 a 22 % das fraturas em felinos são pélvicas e quase metade destas são em ilío, que muitas vezes estão associadas a outras lesões pélvicas ósseas e a tecidos moles. A indicação cirúrgica para o tratamento destas lesões depende do grau de instabilidade, de perda da continuidade óssea, colapso do canal pélvico, fraturas acetabulares, envolvimento de estruturas do eixo de sustentação de peso do animal, lesão nervosa e dor intratável mesmo com uso de analgésicos. O objetivo desta revisão sistemática foi comparar o uso de quatro métodos diferentes para a osteossíntese de ílio em gatos, sendo estes: as placas laterais, placas dorsais, placas em T e, parafusos, fios de Kirschner, fios de aço e polimetilmetacrilato usados em conjunto, em relação às implicações e complicações do uso de cada uma das técnicas. Foram utilizados artigos científicos retrospectivos e prospectivos publicados nas bases de dados informatizados PUBMED, Scielo, Periódico Capes e Google Schoolar que abordassem diferentes técnicas para a osteossíntese de ílio em gatos e foi realizada a análise e comparação de seus dados. Quatro artigos foram selecionados por serem adequados para abordar o tema indicado, todos redigidos em língua inglesa, porém, um sendo de origem francesa e três de origem britânica, cada artigo relatando um tipo diferente de método utilizado. A discussão e a conclusão se deram com base nestes artigos. Nenhuma das técnicas pode ser considerada perfeitamente adequada para qualquer osteossíntese de ílio. Cada uma das quatro possui prós e contras e tem demonstrado melhor eficácia para um tipo específico de fratura ilíaca em gatos, cabendo ao cirurgião veterinário reconhecer e selecionar a melhor a ser utilizada em cada situação

Analysis of acoustic frequency and wave amplitude generated by the Oscillatory Thoracic Thixotropic Device (Diottix(r)) in human chest

Diottix(r) was calibrated at 25 Hz to achieve the frequency indicated in literature as being effective to mobilize the airways secretions. However, the amplitude and frequency of the waves generated by the equipment in different regions of the chest still need to be investigated. The objective of this study was to analyze the frequency and amplitude of waves generated by Diottix(r) in chests of healthy subjects. Diottix(r) was used in the anterior and posterior regions of the chest. The mechanical waves were captured using stethoscopes connected to electret microphones, which were connected to a digital oscilloscope. Frequency and amplitude data were recorded by the stethoscope, positioned in six points in the anterior region and six in the posterior region of the chest, following the positions commonly used in pulmonary auscultation. Signals were recorded and transferred to a computer with software for their analysis. The frequency of waves did not present a significant change (from 24.9 to 26.4 Hz). The wave amplitude in the anterior versus the posterior region in each area of the lung, the upper, middle and lower, had differences. Diottix(r) produces frequencies in the chest according to the calibrated; thus, it can be a complementary resource to bronchial hygiene maneuvers. The amplitudes of waves seem to be affected by other structures like bone parts and heart.

Bone marrow cytological evaluation in dogs with chronic kidneydisease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da obesidade sobre o tecido ósseo de Rattus novergicus albinus idosos, submetidos à suspensão pela cauda e ao exercício resistido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)