Crystal Engineering of an Anti-HIV Drug Based on the Recognition of Assembling Molecular Frameworks

A rational strategy was employed for design of an orthorhombic structure of lamivudine with maleic acid. On the basis of the lamivudine saccharinate structure reported in the literature, maleic acid was chosen to synthesize a salt with the anti-HIV drug because of the structural similarities between the salt formers. Maleic acid has an acid-ionization constant of the anti first proton and an arrangement of their hydrogen bonding functionalities similar to those of saccharin. Likewise, there is a saccharin-like conformational rigidity in maleic acid because of the hydrogen-bonded ring formation and the Z-configuration around the C=C double bond. As was conceivably predicted, lamivudine maleate assembles into a structure whose intermolecular architecture is related to that of saccharinate salt of the drug. Therefore, a molecular framework responsible for crystal assembly into a lamivudine saccharinate-like structure could be recognized in the salt formers. Furthermore, structural correlations and structure-solubility relationships were established for lamivudine maleate and saccharinate. Although there is a same molecular framework in maleic acid and saccharin, these salt formers are Structurally different in some aspects. When compared to saccharin, neither out-of-plane SO(2) oxygens nor a benzene group occur in maleic acid. Both features could be related to higher solubility of lamivudine maleate. Here, we also anticipate that multicomponent molecular crystals of lamivudine with other salt formers possessing the molecular framework responsible for crystal assembly can be engineered successfully.

1,4-Dioxane enhances properties and biocompatibility of polyanionic collagen for tissue engineering applications

Polyanionic collagen obtained from bovine pericardial tissue submitted to alkaline hydrolysis is an acellular matrix with strong potential in tissue engineering. However, increasing the carboxyl content reduces fibril formation and thermal stability compared to the native tissues. In the present work, we propose a chemical protocol based on the association of alkaline hydrolysis with 1,4-dioxane treatment to either attenuate or revert the drastic structural modifications promoted by alkaline treatments. For the characterization of the polyanionic membranes treated with 1,4-dioxane, we found that (1) scanning electron microscopy (SEM) shows a stronger reorientation and aggregation of collagen microfibrils; (2) histological evaluation reveals recovering of the alignment of collagen fibers and reassociation with elastic fibers; (3) differential scanning calorimetry (DSC) shows an increase in thermal stability; and (4) in biocompatibility assays there is a normal attachment, morphology and proliferation associated with high survival of the mouse fibroblast cell line NIH3T3 in reconstituted membranes, which behave as native membranes. Our conclusions reinforce the ability of 1,4-dioxane to enhance the properties of negatively charged polyanionic collagen associated with its potential use as biomaterials for grafting, cationic drug- or cell-delivery systems and for the coating of cardiovascular devices.

Tryptophan photooxidation promoted by new hybrid materials prepared by condensation of naphthalene imides with silicate by the sol-gel process

Three novel hybrid organic/inorganic materials were synthesized from 4-substituted (NO(2), Br, H) 1,8-naphthalene imide-N-propyltriethoxysilane by the sol-gel process. These materials were obtained as a xerogel and partially characterized. The ability to photosensitize the oxidation and degradation of tryptophan indole ring by these materials was studied through photophysical and photochemical techniques. Although the derivatives containing Br and NO(2) as substituent do not cause efficient tryptophan photodamage, the hybrid material obtained from 1,8-naphthalic anhydride is very efficient to promote tryptophan photooxidation. By using laser flash photolysis it was possible to verify the presence of naphthalene imide transient radical species. The presence of oxygen causes an increase of the yield of radical formation. These results suggest that the mechanism of photodegradation of tryptophan occurs by type I, i.e. the transient radical (TrpH(center dot+)) formed by the direct reaction of the triplet state of the naphthalene imide moiety with tryptophan. Thus a inorganic-organic hybrid material that can be used to promote the oxidation of biomolecules was obtained. (C) 2009 Elsevier B.V. All rights reserved.

Microwave-Assisted Derivatization of Cellulose in an Ionic Liquid: An Efficient, Expedient Synthesis of Simple and Mixed Carboxylic Esters

Microwave (MW)-assisted cellulose dissolution in ionic liquids (ILs) has routinely led either to incomplete biopolymer solubilization, or its degradation. We show that these problems can be avoided by use of low-energy MW heating, coupled with efficient stirring. Dissolution of microcrystalline cellulose in the IL 1-allyl-3-methylimidazolium chloride has been achieved without changing its degree of polymerization; regenerated cellulose showed pronounced changes in its index of crystallinity, surface area, and morphology. MW-assisted functionalization of MCC by ethanoic, propanoic, butanoic, pentanoic, and hexanoic anhydrides has been studied. Compared with conventional heating, MW irradiation has resulted in considerable decrease in dissolution and reaction times. The value of the degree of substitution (DS) was found to be DS(ethanoate) > DS(propanoate) > DS(butanoate). The values of DS(pentanoate) and DS(hexanoate) were found to be slightly higher than DS(ethanoate). This surprising dependence on the chain length of the acylating agent has been reported before, but not rationalized. On the basis of the rate constants and activation parameters of the hydrolysis of ethanoic, butanoic, and hexanoic anhydrides in aqueous acetonitrile (a model acyl transfer reaction), we suggest that this result may be attributed to the balance between two opposing effects, namely, steric crowding and (cooperative) hydrophobic interactions between the anhydride and the cellulosic surface, whose lipophilicity has increased, due to its partial acylation. Four ethanoate-based mixed esters were synthesized by the reaction with a mixture of the two anhydrides; the ethanoate moiety predominated in all products. The DS is reproducible and the IL is easily recycled. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 134-143, 2010

Application of 1-Allyl-3-(1-butyl)imidazolium Chloride in the Synthesis of Cellulose Esters: Properties of the Ionic Liquid, and Comparison with Other Solvents

The ionic liquid (IL), 1-allyl-3-(1-butyl)imidazolium chloride (AlBuImCl), has been synthesized and its properties determined. Increase in the temperature increased its conductivity and decreased its density, polarity, and viscosity. Microcrystalline cellulose (MCC), dissolves in thisIL by heating at 80 degrees C; this did not affect its degree of polymerization, decreased its index of crystallinity (Ic), and changed in morphology after regeneration. Convenient acylation of MCC was achieved by using 50% excess anhydride at 80 degrees C, for 24 or 48 h for acetic and butyric anhydride, respectively. The composition of the mixed esters depended on the initial ratio of the anhydrides, and their order of addition.

Acetylation of cellulose in LiCl-N,N-dimethylacetamide: first report on the correlation between the reaction efficiency and the aggregation number of dissolved cellulose

The acylation of three cellulose samples by acetic anhydride, Ac(2)O, in the solvent system LiCl/N,N-dimethylacetamide, DMAc (4 h, 110 A degrees C), has been revisited in order to investigate the dependence of the reaction efficiency on the structural characteristics of cellulose, and its aggregation in solution. The cellulose samples employed included microcrystalline, MCC; mercerized cotton linters, M-cotton, and mercerized sisal, M-sisal. The reaction efficiency expresses the relationship between the degree of substitution, DS, of the ester obtained, and the molar ratio Ac(2)O/AGU (anhydroglucose unit of the biopolymer); 100% efficiency means obtaining DS = 3 at Ac(2)O/AGU = 3. For all celluloses, the dependence of DS on Ac(2)O/AGU is described by an exponential decay equation: DS = DS(o) - Ae(-[(Ac2O/AGU)/B]); (A) and (B) are regression coefficients, and DS(o) is the calculated maximum degree of substitution, achieved under the conditions of each experiment. Values of (B) are clearly dependent on the cellulose employed: B((M-cotton)) > B((M-sisal)) > B((MCC)); they correlate qualitatively with the degree of polymerization of cellulose, and linearly with the aggregation number, N(agg), of the dissolved biopolymer, as calculated from static light scattering measurements: (B) = 1.709 + 0.034 N(agg). To our knowledge, this is the first report on the latter correlation; it shows the importance of the physical state of dissolved cellulose, and serves to explain, in part, the need to use distinct reaction conditions for MCC and fibrous celluloses, in particular Ac(2)O/AGU, time, temperature.

Self-reinforced composites obtained by the partial oxypropylation of cellulose fibers. 2. Effect of catalyst on the mechanical and dynamic mechanical properties

This work describes the partial oxypropylation of filter paper cellulose fibers, employing two different basic catalyst, viz., potassium hydroxide and 1,4-diazabicyclo [2.2.2] octane, to activate the hydroxyl groups of the polysaccharide and thus provide the anionic initiation sites for the ""grafting-from"" polymerization of propylene oxide. The success of this chemical modification was assessed by FTIR spectroscopy, X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis and contact angle measurements. The study of the role of the catalyst employed on the extent of the modification and on the mechanical properties of the ensuing composites, after hot pressing, showed that both the Bronsted and the Lewis base gave satisfactory results, without any marked difference.

Formation and decomposition of N-alkyinaphthalimides: experimental evidences and ab initio description of the reaction pathways

The kinetics of hydrolysis of 1,8-N-butyl-naphthalimide (1,8-NBN) to 1,8-N-butyl-naphthalamide (1,8-NBAmide) and of 2,3-N-butyl-naphthalimide (2,3-NBN) to 2,3-N-butyl-naphthalamide (2,3-NBAmide), as well as the formation of the respective anhydrides from the amides were investigated in a wide acidity range. 1,8-NBN equilibrates with 1,8-NBAmide in mild alkali. Under the same conditions 2,3-NBN quantitatively yields 2,3-NBAmide. Over a wide range of acidities the reactions of the 1,8- and 2,3-N-butyl-naphthalamides (or imides) yield similar products but with widely different rates and at distinct pH`s. Anhydride formation in acid was demonstrated for 1,8-NBAmide. The reactions mechanisms were rationalized in the manifold pathways of ab initio calculations. The differences in rates and pH ranges in the reactions of the 1,8- and 2,3-N-butyl-naphthalamides were attributed to differences in the stability of the tetrahedral intermediates in alkali as well as the relative stabilities of the five and six-membered ring intermediates. The rate of carboxylic acid assisted 1,8-N-Butyl-naphthalamide hydrolysis is one of the largest described for amide hydrolysis models. Copyright (C) 2010 John Wiley & Sons, Ltd.

Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites

The surface of ramie cellulose whiskers has been chemically modified by grafting organic acid chlorides presenting different lengths of the aliphatic chain by an esterification reaction. The occurrence of the chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies, elemental analysis and contact angle measurements. The crystallinity of the particles was not altered by the chain grafting, but it was shown that covalently grafted chains were able to crystallize at the cellulose surface when using C18. Both unmodified and functionalized nanoparticles were extruded with low density polyethylene to prepare nanocomposite materials. The homogeneity of the ensuing nanocomposites was found to increase with the length of the grafted chains. The thermomechanical properties of processed nanocomposites were studied by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and tensile tests. A significant improvement in terms of elongation at break was observed when sufficiently long chains were grafted on the surface of the nanoparticles. It was ascribed to improved dispersion of the nanoparticles within the LDPE matrix. (C) 2009 Elsevier Ltd. All rights reserved.

An insight into the beginning stage of the aqueous ring opening metathesis polymerization of exo,exo-7-oxabicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid with Ru(III) compounds: the consumption of Ru(III) species in the presence of carboxylic acids monitored by ESR spectroscopy

The presence of paramagnetic species in the aqueous ring opening metathesis polymerizations of the exo,exo-7-oxabicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid monomer with RuCl(3) and K(2)[RuCl(5)H(2)O] compounds was studied using ESR techniques. It was observed that the intensities of the Ru(III) signals in the ESR spectra decrease on the time scale of the induction period so that the ROMP can take place. The intensity of the Ru(III) signal almost disappeared 50 min after reacting with K(2)[RuCl(5)H(2)O] and after 100 mm in the case of RuCl(3). Reactions of the cis-[Ru(NH(3))(4)(H(2)O)(2)](tfms)(3) and [Ru(NH(3))(5)H(2)O](tfms)(3) complexes with the monomer and different organic compounds representing the organic functions in the monomer (furan, norbornene, but-2-ene-1,4-diol and formic, acetic, oxalic and maleic acids) were also monitored by ESR and UV/vis spectra. It was deduced that the organic acids provide the disappearance of the Ru(III) signal. The proton NMR relaxation times of the residual water in D(2)O for reactions with oxalic acid suggested that the presence of paramagnetic ions in the solution decreases along with

Removal of Zn(2+) from Electroplating Wastewater Using Modified Wood Sawdust and Sugarcane Bagasse

This paper describes the preparation of new adsorbents derived from sugarcane bagasse and wood sawdust (Manilkara sp.) to remove zinc (II) ions from electroplating wastewater. The first part deals with the chemical modification of sugarcane bagasse and wood sawdust, using succinic anhydride to introduce carboxylic acid functions into the material. The obtained materials (modified sugarcane bagasse MB2 and modified wood sawdust MS2) were then characterized by infrared spectroscopy (IR) and used in adsorption experiments. The adsorption experiments evaluates Zn(2+) removal from aqueous single metal solution and real electroplating wastewater on both batch and continuous experiments using fixed-bed columns prepared in laboratorial scale with the obtained adsorbents. Adsorption isotherms were then developed using Langmuir model and the Thomas kinetic model. The calculated Zn(2+) adsorption capacities were found to be 145 mg/g for MS2 and 125 mg/g for MB2 in single metal aqueous solution, whereas for the industrial wastewater these values were 61 mg/g for MS2 and 55 mg/g for MB2.

Preparação de sílica organofuncionalizada à base de zircônia e estudos de adsorção de hidrocarbonetos policíclicos aromáticos e pesticidas organoclorados

O trabalho realizado conjuga informações de preparação e caracterização de materiais à base de sílica, com avaliação de possível aplicação potencial na área de química analítica ambiental. As sílicas organofuncionalizadas foram preparadas segundo 2 métodos: grafting e sol-gel. Os 4 sólidos obtidos por grafting diferem essencialmente na natureza da esfera de coordenação em torno do centro metálico (átomo de zircônio), enquanto que os 2 sólidos obtidos pelo processo sol-gel são sólidos híbridos, contendo ligantes indenil, grupos silanóis e etóxidos na superfície, diferindo entre si pela presença de centro metálico. Os teores de metal, determinados por RBS, nas sílicas organofuncionalizadas ficaram em torno de 0,3 % para os sólidos preparados por grafting e 4,5 %,no caso, do sólido preparado por sol-gel. A análise por DRIFTS confirmou a presença dos ligantes orgânicos e, ainda, grupos silanóis residuais nos adsorventes preparados por grafting. A capacidade de adsorção das sílicas organofuncionalizadas foi avaliada frente a duas famílias de compostos: HPAs e pesticidas organoclorados. A identificação e quantificação dos HPAs foi conduzida através de cromatografia gasosa com detector seletivo de massas. Os resultados da capacidade de adsorção para os 16 HPAs prioritários não foram quantitativamente considerados satisfatórios, em parte devido à dificuldade de solubilidade em água. A determinação quantitativa da eficiência dos adsorventes sólidos, na pré-concentração/extração dos pesticidas organoclorados, foi realizada através da cromatografia gasosa com detector de captura de elétrons. Os resultados de recuperação, para os compostos organoclorados: heptacloro epóxido, dieldrin e endrin foram considerados satisfatórios e em concordância com valores encontrados com o adsorvente comercial LC-18. O lindano apresentou boa recuperação especificadamente nos adsorventes preparados por sol-gel. De uma forma geral, os resultados indicam a possibilidade de utilização futura dos adsorventes sólidos preparados em protocolos de pré-concentração/extração de organoclorados a nível de traços.

Associação de variáveis histopatológicas de biópsias endomiocárdicas pré e pós cirúrgicas com os resultados clínicos de pacientes com disfunção ventricular esquerda grave submetidos à revascularização do miocárdio

Introdução: A cirurgia de revascularização do miocárdio em pacientes com disfunção ventricular esquerda grave, criteriosamente selecionados, pode levar a um incremento na fração de ejeção e/ou melhora da classe functional da New York Heart Association (NYHA) de insuficiência cardíaca. Neste estudo, buscamos variáveis histopatológicas que pudessem estar associadas com a melhora da fração de ejeção ventricular esquerda e/ou melhora na classe funcional de insuficiência cardíaca seis meses após a cirurgia. Métodos: Vinte e quatro pacientes com indicação de cirurgia de revascularização do miocárdio, fração de ejeção ventricular esquerda < 35%, classe funcional de insuficiência cardíaca variando de NYHA II a IV e idade média de 59±9 anos, foram selecionados. Foram realizadas biópsias endomiocárdicas no transoperatório e repetidas seis meses depois através de punção venosa. Extensão de fibrose (% da área do miocárdio do espécime avaliado), miocitólise (número de células encontradas com miocitólise por campo) e hipertrofia da fibra miocárdica (medida através do menor diâmetro celular) foram quantificados utilizando um sistema analizador de imagem (Leica - Image Analysis System). As medidas de fração de ejeção, por ventriculografia radioisotópica, e avaliação da classe funcional de insuficiência cardíaca (NYHA), também foram repetidas após seis meses. Resultados: Dos 24 pacientes inicialmente selecionados, sete foram a óbito antes dos seis meses e um recusou-se a repetir a segunda biópsia. Houve uma melhora significativa na classe funcional NYHA de insuficiência cardíaca nos sobreviventes seis meses após a cirurgia (2,8±0,7 vs. 1,7±0,6; p<0,001), enquanto que a fração de ejeção ventricular esquerda não se alterou (25±6% vs. 26±10%; p = NS). O grau de hipertrofia da fibra muscular permaneceu estável entre o pré e o pós operatório (21 ± 4 vs.22 ± 4μm), porém a extensão de fibrose (8±8 vs. 21±15% de área) e a quantidade de células apresentando miocitólise (9±11 vs. 21±15%/células) aumentaram. significativamente. Uma composição de escore histológico, combinando as três variáveis histopatológicas, indicando um menor grau de remodelamento no pré operatório, identificou um subgrupo de pacientes que apresentaram um incremento na fração de ejeção ventricular esquerda após a cirurgia de revascularização do miocárdio. Conclusão: Em pacientes portadores de cardiopatia isquêmica e grave disfunção ventricular esquerda, a cirurgia de revascularização do miocárdio foi associada com um incremento na função ventricular em um subgrupo de pacientes que apresentavam, no pré operatório, um menor grau de remodelamento ventricular adverso, estimado pela composição de um escore histológico. Apesar da melhora na classe funcional de insuficiência cardíaca na maioria dos pacientes, e incremento na fração de ejeção ventricular esquerda em um subgrupo, alterações histológicas favoráveis, indicativos de reversão do remodelamento ventricular esquerdo, não devem ser esperados após a revascularização, ao menos num período de seis meses após a cirurgia.

A parturiente: um estudo psicológico

Este trabalho teve por objetivo identificar as vivências femininas no decorrer de seu primeiro parto normal. Pressupondo-se uma abordagem baseada nos ensinamentos fenomenológicos, foi planejada uma pesquisa exploratória de campo em que 30 puérperas de parto normal, poucas horas após terem dado à luz. As entrevistas seguiram o modelo metodológico da técnica de histórias de vida e, através destas, as puérperas contribuíram com um relato acerca de seu parto. Os relatos serviram para nos dar informes a respeito de quatro aspectos básicos acerca da parturiente no processar do seu parto normal: a) vivências físicas; b) vivências emocionais; c) significado da experiência e d) percepção da conduta médica. A experiência de gerar um filho para praticamente todas as mulheres entrevistadas mostrou-se altamente importante e plena de gratificações. Apenas um pequeno número de mulheres apresentou considerações negativas à chegada da criança.

Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas

ALVES, Ana paula Melo. Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas. 2009. 124 f. Tese (Doutorado em Quimica) - Centro de Ciências Exatas e da Natureza, Universidade Federal da Paraíba, João Pessoa, PB, 2009.