Effects of fluazuron (2.5 mg/kg) and a combination of fluazuron (3.0 mg/kg) + abamectin (0.5 mg/kg) on the reproductive parameters of a field population of Rhipicephalus (Boophilus) microplus on experimentally infested cattle

The current study assessed the deleterious effects of two formulations of fluazuron (2.5 mg/kg fluazuron and a combination of 3.0 mg/kg fluazuron + 0.5 mg/kg abamectin) on the reproductive parameters of engorged Rhipicephalus (Boophilus) micro plus females that naturally detached from experimentally infested cattle in two experiments. Based on the obtained results, it can be concluded that fluazuron (2.5 mg/ kg) showed deleterious effects only on the hatchability percentage in the period of 2-7 post-treatment days of this ectoparasite's engorged females. On the other hand, the fluazuron (3.0 mg/kg) + abamectin (0.5 mg/kg) combination presented harmful effects over reproductive parameters of this tick species. Further studies should be performed with a known tick population (reference susceptible strain) to determine the effect of these formulations on the reproductive parameters and to elucidate if this field population is fluazuron resistant. (C) 2014 Elsevier Ltd. All rights reserved.

Proteins, Pathogens, and Failure at the Composite-Tooth Interface

In the United States, composites accounted for nearly 70% of the 173.2 million composite and amalgam restorations placed in 2006 (Kingman et al., 2012), and it is likely that the use of composite will continue to increase as dentists phase out dental amalgam. This trend is not, however, without consequences. The failure rate of composite restorations is double that of amalgam (Ferracane, 2013). Composite restorations accumulate more biofilm, experience more secondary decay, and require more frequent replacement. In vivo biodegradation of the adhesive bond at the composite-tooth interface is a major contributor to the cascade of events leading to restoration failure. Binding by proteins, particularly gp340, from the salivary pellicle leads to biofilm attachment, which accelerates degradation of the interfacial bond and demineralization of the tooth by recruiting the pioneer bacterium Streptococcus mutans to the surface. Bacterial production of lactic acid lowers the pH of the oral microenvironment, erodes hydroxyapatite in enamel and dentin, and promotes hydrolysis of the adhesive. Secreted esterases further hydrolyze the adhesive polymer, exposing the soft underlying collagenous dentinal matrix and allowing further infiltration by the pathogenic biofilm. Manifold approaches are being pursued to increase the longevity of composite dental restorations based on the major contributing factors responsible for degradation. The key material and biological components and the interactions involved in the destructive processes, including recent advances in understanding the structural and molecular basis of biofilm recruitment, are described in this review. Innovative strategies to mitigate these pathogenic effects and slow deterioration are discussed.

Validation of the UNESP-Botucatu unidimensional composite pain scale for assessing postoperative pain in cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimizing xanthophyll concentrations in diets to obtain well-pigmented yolks

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de rochas alcalinas intrusivas na região de Três Fontes - MG

Geological researches conducted in the past few years detected, through deep drill hole data, the presence of alkaline rocks in the region of Três Fontes-MG, where the Barbacena Group rocks, the Morro do Ferro Greenstone Belt rocks and Araxá/Canastra groups‟ rocks are exposed. This paper aimed the petrographic and chemical characterization of these alkaline rock types, which have not yet been described in the literature. Based on petrographic descriptions and geochemical and Scanning Electron Microscopy analysis, it was possible to characterize the rock in question as lamprophyre, rich in carbonates, phlogopite, pyroxene, olivine, titaniferous opaque minerals and apatite concentrations that reach 7%. This occurrence corresponds to an alkaline intrusion, which caused brecciation of host rocks, possibly indicating that the material is explosive, however, in the study area there was no evidence of volcanic activity on the surface

Datação por U-Pb em rutilos de rochas de metamorfismo de alta pressão do grupo Araxá na região de São Sebastião do Paraíso - MG

Although several studies of Araxá Group in the region of Passos, just a few works deal with the age of metamorphism of this group. The current work aims to determine the cooling age of these rocks by in situ U-Pb dating in rutiles. Interestingly, the region of São Sebastião do Paraíso shows a condensed lithostratigraphic column from the Passos Nappe and exposes the higher metamorphic grade rocks described for this unit. The use of rutile as a geochronometer is based on its ability to incorporate U in its structure, facilitating the calculation of the age of the isotope ratio by U-Pb. Furthermore, the use of in situ dating technique with Laser Ablation has been a reliable and advantageous study because the analysis are punctual, and do not destroy the whole sample to be analyzed. The analyses of this work were made at the University of Gothenburg - Sweden and obtained 238U/206Pb ages between 608-566 ± 10 Ma and 235U/207Pb between 627-572 ± 10 Ma, showing that these ages are concordant with the literature in the area and are interpreted as the cooling age of metamorphism

Estudo do metamorfismo de rochas de alto grau do grupo Araxá na região de São Sebastião do Paraíso - MG

This study focuses on metasedimentary rocks from the Passos Nappe in São Sebastião do Paraíso, southern Minas Gerais, Brazil. These rocks belong to the Internal Domain (Araxa Group) of the Southern Brasilia Belt, a Neproterozoic orogenic belt associated to the formation of the Gondwana Supercontinent. Rocks from the studied area are characterized by an inverted metamorphic gradient. Previously calculated metamorphic conditions show an increasing from geenschist facies at the base (450°C, 6 kbar), to upper amphibolite facies (750°C, 11 Kbar) at the top of the sequence. However, most of these estimates are based on Fe-Mg exchange thermometers and peak temperatures may be underestimated due to Fe-Mg exchange from cooling after peak metamorphism. In this study, we present new PT results for these rocks, based on metamorphic mineral assemblage LA-ICP-MS analyses. In the studied area, rocks from the top of the sequence have a typical granulite facies mineral assemblage: Grt+Ky+Kfs+/-Pl+liq. These rocks lack muscovite and have only minor amounts of Ti-rich, dark brown biotite. In a simplified NaKFMASH system the stability field for this mineral assemblage is bounded by the reactions Sil = Ky on the low pressure side, Ms+Ab = Ky+Kfs+liq on the low temperature side and for high-Mg bulk compositions Bt + Grt = Opx + Ky + liq on the high-temperature side. Minimum temperatures (considering post-peak reequilibration) of ca. 750°C are obtained by Fe/(Fe+Mg) values of 0.7 in garnets from a Grt+Ky+Kfs bearing sample. LA-ICP-MS results obtained for three samples show that rutiles included in garnets have up to 1847 ppm of Zr, which would translate into temperatures up to 830°C for a pressure between 12 to 15 kbar. Also for retroeclogite sample, the results indicate the contents of Zr in the garnet 537 ppm at a temperature of 708 ° C. It is noteworthy that several occurrences of retroeclogites occur in the upper part of the sequence and pressures...

Envelhecimento ativo: um desafio para a equipe multidisciplinar e para as pessoas idosas frequentadoras da Unidade de Atenção ao Idoso (UAI), no município de Uberaba - MG

Pós-graduação em Serviço Social - FCHS

A simple method based on ICP-MS for estimation of background levels of arsenic, cadmium, copper, manganese, nickel, lead, and selenium in blood of the Brazillian population

Throughout the world, biomonitoring has become the standard for assessing exposure of individuals to toxic elements as well as for responding to serious environmental public health problems. However, extensive biomonitoring surveys require rapid and simple analytical methods. Thus, a simple and high-throughput method is proposed for the determination of arsenic (As), cadmium (Cd), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), and selenium (Se) in blood samples by using inductively coupled plasma–mass spectrometry (ICPMS). Prior to analysis, 200 ml of blood samples was mixed with 500 ml of 10% v/v tetramethylammonium hydroxide (TMAH) solution, incubated for 10 min, and subsequently diluted to 10 ml with a solution containing 0.05% w/v ethylenediamine tetraacetic acid (EDTA) + 0.005% v/v Triton X-100. After that, samples were directly analyzed by ICP-MS (ELAN DRC II). Rhodium was selected as an internal standard with matrix-matching calibration. Method detection limits were 0.08, 0.04, 0.5, 0.09, 0.12, 0.04, and 0.1 mg//L for As, Cd, Cu, Mn, Ni, Pb, and Se, respectively. Validation data are provided based on the analysis of blood samples from the trace elements inter-\comparison program operated by the Institut National de Santé Publique du Quebec, Canada. Additional validation was provided by the analysis of human blood samples by the proposed method and by using electrothermal atomic absorption spectrometry (ETAAS). The method was subsequently applied for the estimation of background metal blood values in the Brazilian population. In general, the mean concentrations of As, Cd, Cu, Mn, Ni, Pb, and Se in blood were 1.1, 0.4, 890, 9.6, 2.1, 65.4, and 89.3 mg/L, respectively, and are in agreement with other global populations. Influences of age, gender, smoking habits, alcohol consumption, and geographical variation on the values were also considered. Smoking habits influenced the levels of Cd in blood. The levels of Cu, Mn, and Pb were significantly correlated with gender, whereas Cu and Pb were significantly correlated with age. There were also interesting differences in Mn and Se levels in the population living in the north of Brazil compared to the south.

Esthetic and function improvement by direct composite resins and biomimetic concept

Aim: This case report describe a resin layering restorative technique based on biomimetic concept to improve esthetics in a patient with dental defects that affected both enamel and dentin in anterior teeth. Background: Severe structural defect in anterior teeth compromises esthetics and it is a high challenge to become the defect imperceptible after the restoration. Case description: A clinical sequence of applying different composite resin layers allowed the reproduction of the interaction between hard dental tissues and the restorative material. Conclusion: This technique achieved a satisfactory final esthetic outcome, preserving sound teeth structure and at same time, improved the quality of life of the young patient. Clinical significance: The utilization of the biomimetic concept to increase a disharmonic smile with dental defects is based in a conservative approach, which reached a satisfactory and esthetic outcome.

The effect of final irrigation on the penetrability of an epoxy resin-based sealer into dentinal tubules: a confocal microscopy study

Introduction The aim of this study was to compare the effect of QMix, BioPure MTAD, 17 % EDTA, and saline on the penetrability of a resin-based sealer into dentinal tubules using a confocal laser scanning microscope (CLSM) and to describe the cleaning of root canal walls by SEM. Methods Eighty distobuccal roots from upper molars were selected and randomly divided into four groups (n=20) before root canal preparation according to the solution used in the final rinse protocol (FRP): QG (QMix), MG (BioPure MTAD), EG (17 % EDTA), and CG (control group: saline). Ten roots of each group were prepared for SEM, and images (×2000) from the canal walls were acquired. The remaining canals were filled with a single gutta-percha cone and AH Plus with 0.1 % Rhodamine B. The specimens were horizontally sectioned at 4 mm from the apex, and the slices were analyzed in CLSM (×10). Sealer penetration was analyzed with Adobe Photoshop software. Results QG and EG presented similar amounts of sealer penetration (P>.05). MG and CG presented the lowest penetrability values (P<.05). The best results for smear layer removal of the apical third of the root canal were achieved by the QG and EG groups when compared with MG and CG (P<.05). Conclusions Seventeen percent EDTA and QMix promoted sealer penetration superior to that achieved by BioPure MTAD and saline. Clinical relevance Despite studies have not confirmed the relationship between sealing ability of endodontic sealers and their penetration in dentinal tubules, sealer penetration assumes importance, since endodontic sealers, unlike guttapercha, are able to penetrate in dentinal tubules, isthmus, and accessory canals, filling the root canal system.

Refinement and partial validation of the UNESP-Botucatu multidimensional composite pain scale for assessing postoperative pain in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of adding a gonadotropin-releasing-hormone treatment at the beginning and a second prostaglandin F-2 alpha treatment at the end of an estradiol-based protocol for timed artificial insemination in lactating dairy cows during cool or hot seasons of the year

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of daily consumption of synbiotic soy-based product supplemented with okara soybean by-product on risk factors for cardiovascular diseases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acaricidal effects of fluazuron (2.5 mg/kg) and a combination of fluazuron (1.6 mg/kg) + ivermectin (0.63 mg/kg), administered at different routes, against Rhipicephalus (Boophilus) microplus parasitizing cattle

The present study aimed to evaluate the acaricidal efficacy of fluazuron (2.5 mg/kg), administered as a pour-on, in comparison to an injectable formulation containing fluazuron (1.6 mg/kg) + ivermectin (0.63 mg/kg), against Rhipicephalus (Boophilus) microplus in naturally and experimentally infested cattle. Two studies were conducted with different tick strains, one with artificial infestations (Stall Test, using leight animals per group) and one with natural infestations (utilizing ten animals per group): In both studies, the animals were randomized, according to average tick counts performed on days -3, -2 and -1, into four groups: T01, negative control (saline solution); T02, pour-on fluazuron (2.5 mg/kg); T03: subcutaneous fluazuron (1.6 mg/kg) + ivermectin (0.63 mg/kg); and T04 subcutaneous ivermectin (0.63 mg/kg). Based on obtained results, and considering the utilized tick strains, it was possible to conclude that the pour-on fluazuron (2.5 mg/kg) formulation demonstrated high acaricidal efficacy, with protection periods ranging from 49 to 77 days against Rhipicephalus (Boophilus) microplus. On the other hand, for the injectable fluazuron (1.6 mg/kg) + ivermectin (0.63 mg/kg) formulation, it was not possible to observe elevated anti-R. (B.) microplus effect on both artificial and experimental infestation studies. Results observed for this combination were similar or inferior to those obtained by subcutaneous ivermectin (0.63 mg/kg). Future studies with this formulation containing fluazuron (1.6 mg/kg) + ivermectin (0.63 mg/kg), regarding pharmacokinetic and/or bioavailability profiles, or even studies analyzing both this active principles separately, are needed, seeking to better understand the effects of such combination against Rhipicephalus (Boophilus) microplus parasitizing cattle. (C) 2015 Elsevier Inc. All rights reserved.