Sexual orientation and sexual behavior patterns: Evaluation of agreement and variation in a cohort of male, African American drug users in Houston, TX

Background. Sexual orientation and sexual behavior among men have shown disagreement in past studies. The term "on the down low" has been adopted by many to describe "straight" identifying men who have sex with men but do not inform their primary female partner. Methods. This secondary analysis of data collected from the "DASH Project---A Hepatitis B Vaccine Model for HIV Vaccine Trial in Drug Users," assessed sexual behavior patterns among African American drug-using men over time. Using a screener questionnaire to determine sexual orientation and sexual behavior of the men, the study specifically evaluated "straight" identified men who have sex with women only (MSW) to determine what factors were associated with sexual behavior variation to include men during follow-up. The Fisher's Exact Test was used to evaluate the factors. Results. Variation of sexual behavior was highest among "bisexual" identified men followed by "gay" identified men. Fifteen of the original 593 "straight" and MSW men had sexual behavior variation to include men. In the analysis of "straight" and MSW men with variation in sexual behavior compared to those who did not, living on the streets, greater number of sexual partners, trading sex for drugs, and trading sex for money were associated with sexual behavior variation (all p-values <0.01). Conclusions. The factors were only associated when considering the interview when the variation occurred. The same factors at screening were not predictive of sexual behavior variation in the future. Environmental factors, such as living situation, appear to play a role in sexual behavior variations in "straight" and MSW men. ^ Keywords. sexual behavior, sexual orientation, Fisher's Exact Test^

Internet use, exposure to Internet pornography, and sexual behavior among middle school youth

The purpose of this study is to examine associations between adolescents’ Internet use, exposure to pornography online, and sexual behavior. This cross-sectional study examines data collected from an HIV, sexually transmitted infection, and pregnancy prevention program being evaluated in inner-city middle schools. Chi-squares were used to examine differences in Internet use and exposure to Internet pornography by gender, race/ethnicity, and sexual behavior. Univariate and multivariate logistic regression were used to examine associations between Internet use, exposure to Internet pornography, and sexual behavior. Ninety-four percent of students have used the Internet. Sixty-two percent of students had accidentally seen pornography on the Internet and 35% had purposefully viewed pornography online. Students who experienced sexual solicitation and who purposefully viewed pornography online were more likely to report lifetime and current sexual behavior. Additional research is needed to understand the impact of Internet use and exposure to Internet pornography on adolescents’ sexual behavior.^

Ethnic comparisons of adolescent sexual risk -taking and preventive behavior

For adolescents, unprotected sexual intercourse is the primary cause of sexually transmitted disease (STD), including Human Immunodeficiency Virus (HIV) infection (virus which causes Acquired Immunodeficiency Syndrome (AIDS)), and pregnancy. Although many studies on adolescent sexual behavior have addressed racial/ethnic differences, few studies have examined the relation between race/ethnicity while controlling for other sociocultural and psychosocial variables. The purpose of this study is to examine the relationship between racial/ethnic categories and selected sociocultural and psychosocial variables, with reported adolescent sexual risk-taking and preventive behavior.^ A self-administered questionnaire was used to collect information from 3132 students in a Texas school district (Section 3.5.2). The instrument contained approximately 100 questions on demographic characteristics, sexual behavior, and psychosocial determinants of sexual behavior. Based on the findings of this study, the following major conclusions are made: (1) There are differences in reported sexual risk-taking and preventive behavior among Black, Hispanic and White adolescents in this study. The stratified analysis by gender further suggests significant gender differences in reported sexual behavior among the three racial/ethnic groups. (2) Gender, living arrangement, academic grades, and language spoken at home modified the association between reported sexual risk-taking and preventive behavior and race/ethnicity in this study. This suggests that these sociocultural variables should be considered in future research and practice involving multicultural populations. (3) There are differences in selected psychosocial determinants among the three racial/ethnic groups and between males and females. These differences were consistent with the reported sexual risk-taking and preventive behaviors among race/ethnicity and gender for adolescents in this study. The findings support the consideration of psychosocial determinants in research and interventions addressing adolescent sexual behavior among different racial/ethnic groups.^ Based on the results of this study, two recommendations for practice are made. First, health professionals developing interventions for adolescents from different cultural backgrounds and gender need to be familiar with the specific sociocultural and psychosocial factors which will reduce risky sexual behavior, and promote protective behavior. Second, the need for immediate, realistic, and continuous HIV/STD and pregnancy prevention programs for children and adolescents should be considered. ^

Strength and deformation behavior of ODP Leg 110 sediments

The shape and morphology of the northern Barbados Ridge complex is largely controlled by the sediment yield and failure behavior in response to high lateral loads imposed by convergence. Loads in excess of sediment yield strength result in nonrecoverable deformations within the wedge, and failure strength acts as an upper limit beyond which stresses are released through thrust faults. Relatively high loading rates lead to delayed consolidation and in-situ pore pressures greater than hydrostatic. The sediment yield and failure behavior is described for any stress path by a generalized constitutive model. A yield locus delineates the onset of plastic (non-recoverable) deformation, as defined from the isotropic and anisotropic consolidation responses of high-quality 38-mm triaxial specimens; a failure envelope was obtained by shearing the same specimens in both triaxial compression and extension. The yield locus is shown to be rotated into extension space and is centered about a K-line greater than unity, suggesting that the in-situ major principal stress has rotated into the horizontal plane, and that the sediment wedge is being subjected to extensional effective stress paths.

Fecal pellet ingestion rate and feeding behavior of Oithona similis, Calanus helgolandicus and Pseudocalanus elongatus from the North Sea

Studies of fecal pellet flux show that a large percentage of pellets produced in the upper ocean is degraded within the surface waters. It is therefore important to investigate these degradation mechanisms to understand the role of fecal pellets in the oceanic carbon cycle. Degradation of pellets is mainly thought to be caused by coprophagy (ingestion of fecal pellets) by copepods, and especially by the ubiquitous copepods Oithona spp. We examined fecal pellet ingestion rate and feeding behavior of O. similis and 2 other dominant copepod species from the North Sea (Calanus helgolandicus and Pseudocalanus elongatus). All investigations were done with fecal pellets as the sole food source and with fecal pellets offered together with an alternative suitable food source. The ingestion of fecal pellets by all 3 copepod species was highest when offered together with an alternative food source. No feeding behavior was determined for O. similis due to the lack of pellet capture in those experiments. Fecal pellets offered together with an alternative food source increased the filtration activity by C. helgolandicus and P. elongatus and thereby the number of pellets caught in their feeding current. However, most pellets were rejected immediately after capture and were often fragmented during rejection. Actual ingestion of captured pellets was rare (<37% for C. helgolandicus and <24% for P. elongatus), and only small pellet fragments were ingested unintentionally along with alternative food. We therefore suggest coprorhexy (fragmentation of pellets) to be the main effect of copepods on the vertical flux of fecal pellets. Coprorhexy turns the pellets into smaller, slower-sinking particles that can then be degraded by other organisms such as bacteria and protozooplankton.

Seawater carbonate chemistry and auditory behavior of Orange clownfish (Amphiprion percula) during experiments, 2011

Ocean acidification is predicted to affect marine ecosystems in many ways, including modification of fish behaviour. Previous studies have identified effects of CO2-enriched conditions on the sensory behaviour of fishes, including the loss of natural responses to odours resulting in ecologically deleterious decisions. Many fishes also rely on hearing for orientation, habitat selection, predator avoidance and communication. We used an auditory choice chamber to study the influence of CO2-enriched conditions on directional responses of juvenile clownfish (Amphiprion percula) to daytime reef noise. Rearing and test conditions were based on Intergovernmental Panel on Climate Change predictions for the twenty-first century: current-day ambient, 600, 700 and 900 µatm pCO2. Juveniles from ambient CO2-conditions significantly avoided the reef noise, as expected, but this behaviour was absent in juveniles from CO2-enriched conditions. This study provides, to our knowledge, the first evidence that ocean acidification affects the auditory response of fishes, with potentially detrimental impacts on early survival.

Excess capital and bank behavior : evidence from Indonesia

The Indonesian banking sector has been restructured since Asian financial crisis and restored to soundness. The capital adequacy ratio (CAR) returned to a sound level; however, the average excess capital has become too high, while credit disbursement has remained low. This paper investigates the determinants of excess capital among Indonesian banks and its effects on credit growth during the 2000s. The results indicate that the determinants of excess capital vary widely depending on bank type. Return on equity (ROE) affects excess capital negatively among domestic banks, and the effect of non-performing loans is mixed, differing for various bank types. Excess capital affects credit growth positively, except among foreign banks.

Correlation Between Processing Conditions, Microstructure and Mechanical Behavior in Regenerated Silkworm Silk Fibers

Regenerated silkworm fibers spun through a wet-spinning process followed by an immersion postspinning drawing step show a work to fracture comparable with that of natural silkworm silk fibers in a wide range of spinning conditions. The mechanical behavior and microstructure of these high performance fibers have been characterized, and compared with those fibers produced through conventional spinning conditions. The comparison reveals that both sets of fibers share a common semicrystalline microstructure, but significant differences are apparent in the amorphous region. Besides, high performance fibers show a ground state and the possibility of tuning their tensile behavior. These properties are characteristic of spider silk and not of natural silkworm silk, despite both regenerated and natural silkworm silk share a common composition different from that of spider silk.

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests.

Influence of cement properties in the reaction rate and mechanical behavior of concrete with high fl y ash content

The use of fly ash (FA) as an admixture to concrete is broadly extended for two main reasons: the reduction of costs that supposes the substitution of cement and the micro structural changes motivated by the mineral admixture. Regarding this second point, there is a consensus that considers that the ash generates a more compact concrete and a reduction in the size of the pore. However, the measure in which this contributes to the pozzolanic activity or as filler is not well defined. There is also no justification to the influence of the physical parameters, fineness of the grain and free water, in its behavior. This work studies the use of FA as a partial substitute of the cement in concretes of different workability (dry and wet) and the influence in the reactivity of the ash. The concrete of dry consistency which serves as reference uses a cement dose of 250 Kg/m 3 and the concrete of fluid consistency utilized a dose of cement of 350 Kg/m 3 . Two trademark of Portland Cement Type 1 were used. The first reached the resistant class for its fineness of grain and the second one for its composition. Moreover, three doses of FA have been used, and the water/binder ratio was constant in all the mixtures. We have studied the mechanical properties and the micro-structure of the concretes by means of compressive strength tests, mercury intrusion porosimetry (MIP) and thermal analysis (TA). The results of compressive strength tests allow us to observe that concrete mixtures with cements of the same classification and similar dosage of binder do not present the same mechanical behavior. These results show that the effective water/binder ratio has a major role in the development of the mechanical properties of concrete. The study of different dosages using TA, thermo-gravimetry and differential thermal analysis, revealed that the portlandite content is not restrictive in any of the dosages studied. Again, this proves that the rheology of the material influences the reaction rate and content of hydrated cement products. We conclude that the available free water is determinant in the efficiency of pozzolanic reaction. It is so that in accordance to the availability of free water, the ashes can react as an active admixture or simply change the porous distribution. The MIP shows concretes that do not exhibit significant changes in their mechanical behavior, but have suffered significant variation in their porous structure

Hybrid Approach Combining Machine Learning and a Rule-Based Expert System for Text Categorization

This paper discusses a novel hybrid approach for text categorization that combines a machine learning algorithm, which provides a base model trained with a labeled corpus, with a rule-based expert system, which is used to improve the results provided by the previous classifier, by filtering false positives and dealing with false negatives. The main advantage is that the system can be easily fine-tuned by adding specific rules for those noisy or conflicting categories that have not been successfully trained. We also describe an implementation based on k-Nearest Neighbor and a simple rule language to express lists of positive, negative and relevant (multiword) terms appearing in the input text. The system is evaluated in several scenarios, including the popular Reuters-21578 news corpus for comparison to other approaches, and categorization using IPTC metadata, EUROVOC thesaurus and others. Results show that this approach achieves a precision that is comparable to top ranked methods, with the added value that it does not require a demanding human expert workload to train

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented

Measuring the influence of Cooperative Learning and Project Based Learning on problem solvin skill.

The aim of this study is to evaluate the effects obtained after applying two active learning methodologies (cooperative learning and project based learning) to the achievement of the competence problem solving. This study was carried out at the Technical University of Madrid, where these methodologies were applied to two Operating Systems courses. The first hypothesis tested was whether the implementation of active learning methodologies favours the achievement of ?problem solving?. The second hypothesis was focused on testing if students with higher rates in problem solving competence obtain better results in their academic performance. The results indicated that active learning methodologies do not produce any significant change in the generic competence ?problem solving? during the period analysed. Concerning this, we consider that students should work with these methodologies for a longer period, besides having a specific training. Nevertheless, a close correlation between problem solving self appraisal and academic performance has been detected.