In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

Effectiveness and safety of a new vaginal misoprostol product specifically labeled for cervical ripening and labor induction

Objective. The purpose of this study was to evaluate the effectiveness and safety of misoprostol in two different formulations: vaginal tablets of 25 mu g and one-eighth of a 200-mu g oral tablet, also administered intravaginally, for cervical ripening and labor induction of term pregnancies with an indication for that. Methods. A single-blind, randomized, controlled clinical trial was carried out in 120 pregnant women who randomly received one of the two formulations. The main dependent variables were mode of delivery, need for additional oxytocin, time between beginning of induction and delivery, perinatal results, complications, and maternal side effects. Student's t, Mann-Whitney, chi(2), Fisher's Exact, Wilcoxon and Kolmogorov-Smirnoff tests, as well as survival analysis, were used in the data analysis. Results. There were no significant differences between the groups in terms of general characteristics, uterine contractility, and fetal well-being during labor, cesarean section rates, perinatal outcomes, or maternal adverse events. The mean time between the beginning of cervical ripening and delivery was 31.3 h in the vaginal tablet group and 30.1 h in the oral tablet group, a difference that was not statistically significant. Conclusion. The results showed that the 25-mu g vaginal tablets of misoprostol were as effective and safe for cervical ripening and labor induction as the dose-equivalent fraction of 200-mu g oral tablets.

A Non-Destructive Testing Based on Electromagnetic Measurements and Neural Networks for the Inspection of Concrete Structures

This paper presents a new non-destructive testing (NDT) for reinforced concrete structures, in order to identify the components of their reinforcement. A time varying electromagnetic field is generated close to the structure by electromagnetic devices specially designed for this purpose. The presence of ferromagnetic materials (the steel bars of the reinforcement) immersed in the concrete disturbs the magnetic field at the surface of the structure. These field alterations are detected by sensors coils placed on the concrete surface. Variations in position and cross section (the size) of steel bars immersed in concrete originate slightly different values for the induced voltages at the coils.. The values for the induced voltages were obtained in laboratory tests, and multi-layer perceptron artificial neural networks with Levemberg-Marquardt training algorithm were used to identify the location and size of the bar. Preliminary results can be considered very good.

DIAGNOSIS of REGIONAL CEREBRAL BLOOD FLOW ABNORMALITIES USING SPECT: AGREEMENT BETWEEN INDIVIDUALIZED STATISTICAL PARAMETRIC MAPS and VISUAL INSPECTION BY NUCLEAR MEDICINE PHYSICIANS WITH DIFFERENT LEVELS of EXPERTISE IN NUCLEAR NEUROLOGY

INTRODUCTION: Visual analysis is widely used to interpret regional cerebral blood flow (rCBF) SPECT images in clinical practice despite its limitations. Automated methods are employed to investigate between-group rCBF differences in research Studies but have rarely been explored in individual analyses.OBJECTIVES: To compare visual inspection by nuclear physicians with the automated statistical parametric mapping program using a SPECT dataset of patients with neurological disorders and normal control images.METHODS: Using statistical parametric mapping, 14 SPECT images from patients with various neurological disorders were compared individually with a databank of 32 normal images using a statistical threshold of p<0.05 (corrected for multiple comparisons at the level of individual voxels or clusters). Statistical parametric mapping results were compared with Visual analyses by a nuclear physician highly experienced in neurology (A) as well as a nuclear physician with a general background of experience (B) who independently classified images as normal or altered, and determined the location of changes and the severity.RESULTS: of the 32 images of the normal databank, 4 generated maps showing rCBF abnormalities (p<0.05, corrected). Among the 14 images from patients with neurological disorders, 13 showed rCBF alterations. Statistical parametric mapping and physician A completely agreed on 84.37% and 64.28% of cases from the normal databank and neurological disorders, respectively. The agreement between statistical parametric mapping and ratings of physician B were lower (71.18% and 35.71%, respectively).CONCLUSION: Statistical parametric mapping replicated the findings described by the more experienced nuclear physician. This finding suggests that automated methods for individually analyzing rCBF SPECT images may be a valuable resource to complement visual inspection in clinical practice.

A stochastic shift model for economically designed charts constrained by the process stage configuration

An economic model including the labor resource and the process stage configuration is proposed to design g charts allowing for all the design parameters to be varied in an adaptive way. A random shift size is considered during the economic design selection. The results obtained for a benchmark of 64 process stage scenarios show that the activities configuration and some process operating parameters influence the selection of the best control chart strategy: to model the random shift size, its exact distribution can be approximately fitted by a discrete distribution obtained from a relatively small sample of historical data. However, an accurate estimation of the inspection costs associated to the SPC activities is far from being achieved. An illustrative example shows the implementation of the proposed economic model in a real industrial case. (C) 2011 Elsevier B.V. All rights reserved.

Division of labor in Ectatomma edentatum (Hymenoptera, Formicidae)

The behavioral division of labor between queens and workers of E. edentatum was investigated under laboratory conditions. Each behavioral category of both castes was described by direct observation of the ants in the colonies. The spatial position and the behavior of each individual were recorded. A colony ethogram was constructed to determine comparatively the behavioral repertory of the 2 castes. Most of the members of the colonies, including the queens, occupied the 2nd chamber, which also contained the immature stages. Forty-two behavioral categories were recorded for the workers, and 28 for the queens. The comparison of the behavioral repertory of the 2 castes revealed that ovipositing a fecundated egg is an exclusive behavior of the queens, while the workers showed 15 exclusive behaviors. Queens were never seen foraging out of the nest. Twelve behaviors were common for both castes. Polygynic colonies have only 1 female with full-developed ovaries, which is the main egg layer of the group, a feature defining the social organization of colonies of E. edentatum as a functional monogyny.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Active labor market programs for the integration of youths and immigrants into the labor market: the Nordic experience

Incluye Bibliografía

Two stops in today's new global geographies: shaping novel labor supplies and employment regimes

Includes bibliography

Division of labor in pachycondyla striata Fr. Smith, 1858 (Hymenoptera: Formicidae: Ponerinae)

Four colonies of the ant Pachycondyla striata were used to analyze the specie behavioral repertoire. Forty-six behavioral acts were recorded in laboratory. Here, we present the record the division of labor between the castes and the temporal polyethism of monomorphic workers. The queens carried out many of the behavioral traits recorded in this work however; they performed them less frequently compared to the worker. The workers activity involved chasing and feeding on fresh insects and usingthem to nourish larvae besides laying eggs in the C-posture, an activity also performed by queens, which is similar to that of wasps of the subfamily Stenogastrinae. The young workers were involved in activities of brood care, sexuate care, and nest maintenance, and the older workers were involved in defense, exploration, and foraging. © 2012 Adolfo da Silva-Melo and Edilberto Giannotti.

Labor force participation: a stimulus to fertility in Puerto Rico?

Includes bibliography

La labor del ILPES en capacitación sobre temas del desarrollo "regional"

Incluye Bibliografía