Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Síntese e caracterização de aluminofosfato impregnado com molibdênio/zinco visando a dessulfurização por adsorção

Discussions about pollution caused by vehicles emission are old and have been developed along the years. The search for cleaner technologies and frequent weather alterations have been inducing industries and government organizations to impose limits much more rigorous to the contaminant content in fuels, which have an direct impact in atmospheric emissions. Nowadays, the quality of fuels, in relation to the sulfur content, is carried out through the process of hydrodesulfurization. Adsorption processes also represent an interesting alternative route to the removal of sulfur content. Both processes are simpler and operate to atmospheric temperatures and pressures. This work studies the synthesis and characterization of aluminophosphate impregnate with zinc, molybdenum or both, and its application in the sulfur removal from the gasoline through the adsorption process, using a pattern gasoline containing isooctane and thiophene. The adsorbents were characterized by x-ray diffraction, differential thermal analysis (DTG), x-ray fluorescence and scanning electron microscopy (SEM). The specific area, volume and pore diameter were determined by BET (Brunauer- Emmet-Teller) and the t-plot method. The sulfur was quantified by elementary analysis using ANTEK 9000 NS. The adsorption process was evaluated as function of the temperature variation and initial sulfur content through the adsorption isotherm and its thermodynamic parameters. The parameters of entropy (ΔS), enthalpy variation (ΔH) and free Gibbs energy (ΔG) were calculated through the graph ln(Kd) versus 1/T. Langmuir, Freundlich and Langmuir-Freundlich models were adjusted to the experimental data, and the last one had presented better results. The thermodynamic tests were accomplished in different temperatures, such as 30, 40 and 50ºC, where it was concluded the adsorption process is spontaneous and exothermic. The kinetic of adsorption was studied by 24 h and it showed that the capability adsorption to the adsorbents studied respect the following order: MoZnPO > MoPO > ZnPO > AlPO. The maximum adsorption capacity was 4.91 mg/g for MoZnPO with an adsorption efficiency of 49%.

Synthesis, characterization and thermal behaviour on solid pyruvates of light trivalent lanthanides

Foram sintetizados compostos Ln-L no estado sólido, onde Ln significa os lantanídeos leves trivalentes e L é o piruvato. Estes compostos foram caracterizados e estudados utilizando-se a Termogravimetria e Termogravimetria derivada (TG/DTG), calorimetria exploratória diferencial (DSC) difratometria de raios X pelo método do pó, espectroscopia na região do infravermelho, análise elementar e complexometria. Os resultados permitiram obter informações com respeito a composição, desidratação, sitio de coordenação, comportamento térmico e a decomposição térmica destes compotos.

Thermal studies on solid 1,4-bis(3-carboxy-3-oxo-prop-1-enyl) benzene of lighter trivalent lanthanides

Solid-state compounds of general formula Ln(2)L(3)center dot nH(2)O, where L represents 1,4-bis(3-carboxy-3-oxo-prop-1-enyl)benzene and Ln = La, Ce, Pr, Nd, Sm, were synthesized. Complexometric titrations with EDTA, thermogravimetry (TG), differential thermal analysis (DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, elemental analysis and infrared spectroscopy have been employed to characterize and to study the thermal behavior of these compounds in dynamic air atmosphere. The results led to information about the composition, dehydration, crystallinity, and thermal decomposition of the synthesized compounds.

Thermal and spectroscopic studies on solid Ketoprofen of lighter trivalent lanthanides

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do comportamento térmico e da luminescência de filmes de quitosana com os íons Eu3+ e Tb3+

Films of chitosan with trivalent lanthanides ions Eu3+ and Tb3+ were respectively prepared in the ratio of 3:1 m/m (chitosan: lanthanide) and 6:1 m/m (chitosan: lanthanide). There were no formations of films in a ratio of 1:1 m/m (chitosan: lanthanides). The films of chitosan with the Tb3+ ion have the same transparent appearance than the pure chitosan films. The film of chitosan with Eu3+ ion has a muddy appearance. These films present good resistance to tear. The appearance of the compounds prepared in ratio 1:1m/m is a white powder. The films and compounds of chitosan were characterized by Elementary Analysis (CHN), Thermal Analysis (TG/DTG) and Spectroscopy of Luminescence. The CHN analysis was made only for compounds prepared in ratio 1:1m/m, suggesting that these compounds possess the formula QUILn.6H2O, where QUI = Chitosan and Ln = Lanthanide. The results of the curves TG/DTG indicated that there are strong interactions between Eu3+ or Tb3+ and chitosan, causing a lesser lost of mass in the films. The luminescence analysis showed that the films of chitosan with the ions Eu3+ and Tb3+ present emissions in the region of the visible one, with bands of the chitosan and of the Eu3+ ion. The luminescence analysis of the compounds of chitosan with the Eu3+ and Tb3+ ions suggest that the chitosan does not transfer into energy to the ions lanthanides, however the chemical neighborhood around of the ion lanthanides breaks the selection rules and, conseqüently the 4f-4f transitions of the lanthanide ions are observed

Síntese e caracterização da peneira molecular MCM-41 contendo terras raras na dessulfurização, utilizando tiofeno como molécula sonda

Mesoporous molecular sieves of MCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work, mesoporous molecular sieves MCM-41 were modified with different rare earth ions (La, Eu e Yb) for the obtaining nanostrutured materials with catalytic properties. The catalysts were synthesized by the hydrothermal method at 100oC for 120 h, presenting, all the samples, in the gel of synthesis molar ratio Si/Ln = 50. The obtained materials after calcination at 500oC for 2 h were characterized by XRD, surface area BET, TG/DTG, FTIR, and hydrothermal stability at 700ºC. The XRD analysis of the catalysts indicated that the materials containing rare earth presented characteristic hexagonal structure of the mesoporous materials of the type MCM-41. The TG curves showed that the decomposition of the structural template occurs in the materials at temperatures lower than 500oC. The samples presented variations as the specific superficial area, average diameter of pores and thickness of the silica wall, as a function of the nature of the rare earth impregnated in the mesoporous material. Hydrotermal stability was evaluated through the exposition of the materials to water vapour at 700°C. The thiophene adsorptions reach a maximum at 80% of conversion and incorporation of the rare earths showed influence in the process. Adsorption capacity followed the sequence: Yb-MCM-41 < La-MCM-41 < Eu-MCM-41 < MCM-41

Análise dos aspectos éticos da pesquisa em seres humanos contidos nas Instruções aos Autores de 139 revistas científicas brasileiras

OBJETIVO: Estudar as normas relativas à ética da pesquisa em seres humanos contidas nas Instruções aos Autores de revistas científicas brasileiras. MATERIAL E MÉTODOS: As Instruções aos Autores de 139 revistas científicas brasileiras das áreas de medicina, biomedicina, enfermagem, odontologia e ciências gerais foram analisadas com relação às suas recomendações sobre os aspectos éticos. RESULTADOS: Das 139 revistas estudadas, 110 (79,1%) não fazem referências aos aspectos éticos; 17 (12,2%) exigem aprovação prévia pela Comissão de Ética; três (2,1%) fazem referência à Declaração de Helsinque; uma (0,7%) recomenda adotar o consentimento esclarecido; cinco (3,5%) seguem orientações dos requisitos uniformes para manuscritos submetidos a revistas biomédicas e três (2,1%) seguem princípios, normas e padrões éticos não especificados. Nas 29 revistas que fazem referências à ética, as exigências são solicitadas sob as seguintes formas: 15 (51,7%) exigem a inclusão da informação no texto do artigo; duas (6,8%) pedem carta assinada pelos autores; uma (3,4%) solicita cópia da autorização da Comissão de Ética; uma (3,4%) afirma supor que o autor cumpriu as exigências e dez (34,4%) não fazem qualquer referência específica. CONCLUSÕES: Os resultados do estudo indicam que na maioria das revistas científicas brasileiras há pouca preocupação em relação aos aspectos éticos da pesquisa em seres humanos, contidas nas Instruções aos Autores. Nas revistas que fazem referência aos aspectos éticos, as exigências são muito variáveis.

Cultivo de algas marinhas como desenvolvimento de comunidades costeiras

In northeastern Brazil, the extraction of agar has increased considerably in recent decades mainly using macroalgae of the genus Gracilaria. The pressure of the harvest of seaweed of this genus has compromised the sustainability of this natural resource. Given the current framework of decline in production of algae in the state of Rio Grande do Norte, it is necessary the deployment of crops that will assist in the development of coastal areas. This research aimed to develop studies on growth, productivity, efficiency and quality of agar of G. birdiae so as to provide subsidies for crops on commercial scale. The study was carried out in dry and rainy periods using rafts of cultivation. Algal biomass and the physical and chemical parameters of water were measured every fifteen days. In laboratory, the resistance and quality of agar were analyzed. The relative growth rate (TCR) was determined by the formula: RGR = ln (final weight / weight initial). 100 / interval time of sampling. During the study, environmental factors as salinity and temperature remained relatively constant (around 35 PSU and 28°C, respectively). The mean values of biomass ranged around 1952.67 ± 576g in the rainy period and 1925.67 ± 450g in the dry period, and they presented no significant variations. The maximum value of growth (TCR) was recorded in the dry season (7.45%.day-1), with an average over the study of 4.35%.day-1. The yield of agar ranged from 22% to 15%, and its resistance ranged from 850 to 650g. cm². The average obtained for the two periods was approximately 750 g cm². These results demonstrate the great potential of Gracilaria birdiae for mariculture can be used as an sustainable activity for coastal communities

Evolução tectono-estrutural do Campo de Xaréu (Sub-bacia de Mundaú, Bacia do Ceará - NE do Brasil: abordagem multiescala e pluriferramental

The Xaréu Oil Field, located in the center-southern portion of the Mundaú Sub-Basin (eastern portion of the Ceará Basin), is characterized by a main Iramework of NW-trending and NE-dipping faults. The faults in the Xaréu Oil Field, among which the Xaréu Fautt stands out, are arranged according to an extensional-listriclan, rooted on a detachment surface corresponding to the Mundaú Fault, the border fautt of Mundaú Sub-Basin. During the tectonic-structural evolution of the Xaréu Oil Field and the Mundaú Sub-Basin, the Mundaú Fault played a crucial role on the control of the geometry of both compartments. The main carbonatic unit in the Xaréu Oil Field, named the Trairí Member(Paracuru Formation of Late Aptian to Early Albian age), contains the largest oil volume in the field, concentrated in structurally-controlled accumulations. The Trairí Member is composed by a variety of carbonatic rocks (massive, bedded or laminated calcilutites, ostracodites, calcarenites and carbonatic rudites, all of them presenting variable degrees of dolomitization). The carbonatic rocks are interbedded into thick packages of black shales and marls, besides local beds of siliciclastic conglomerates, sandstones, siltnes and argillites. From the spatial association and the genetic relationships between the carbonatic and siliciclastic units, it is possible to group them in three lithofacies associations (Marginal Plain, Ramp and Lacustrine Interior) that, together, were developed in a lacustrine system associated to a marginal sabkha. Structural studies based on drill coresthat sample the Trairí Member in the Xaréu Oil Field allowed to characterize two generations of meso- to microscale structures: the D1 group presents a typical hydroplastic character, being characterized by intra/interstratal to oblique-bedding shear zones. The hydroplastic character related to these structures allowed to infer their development at an early-lithilication stage of the Trairí Member, leading to infer an Early Cretaceous age to them. The second group of structures identified in the drill cores, nominated D2 and ascribed to a Neogene age, presents a strictly brttle character, being typilied by normal faults and slickenfibers of re-crystallized clayminerals, ali olthem displaying variable orientations. Although the present faults in the Xaréu Oil Field (and, consequently, in the Mundaú Sub-Basin) were classically relerred as struetures of essentially normal displacement, the kinematics analysis of the meso-to microscaie D1 struetures in the drill cores led to deline oblique displacements (normal with a clockwise strike-slip component) to these faults, indicating a main tectonic transport to ENE. These oblique movements would be responsible for the installation of a transtensive context in the Mundaú Sub-Basin, as part of the transcurrent to translormant opening of the Atlantic Equatorial Margin. The balancing of four struetural cross-sections ofthe Xaréu Oil Field indicates that the Mundaú Fault was responsible for more than 50% of the total stretching (ß factor) registered during the Early Aptian. At the initial stages of the "rifting", during Early Aptianuntil the Holocene, the Mundaú Sub-Basin (and consequently the Xaréu Oil Fleld) accumulated a total stretching between 1.21 and 1.23; in other words, the crust in this segment of the Atlantic Equatorial Margin was subjeeted to an elongation of about 20%. From estimates of oblique displacements related to the faults, it ws possible to construct diagrams that allow the determination of stretching factors related to these displacements. Using these diagrams and assuming the sense 01 dominant teetonictransport towards ENE, it was possible to calculate the real stretching lactors related to the oblique movement 0 of the faults in the Mundaú Sub-Basin. which reached actual values between 1.28 and 1.42. ln addnion to the tectonic-structural studies in the Xaréu Oil Field, the interpretation of remote sensing products, coupled wnh characterization of terrain analogues in seleeted areas along the northern Ceará State (continental margins of the Ceará and Potiguar basins), provided addnional data and constraints about the teetonic-structural evolution of the oil lield. The work at the analogue sites was particularly effective in the recognition and mapping, in semidetail scale, several generations of struetures originated under a brittle regime. Ali the obtained information (from the Xaréu Oil Field, the remote sensor data and the terrain analogues) were jointly interpreted, culminating with the proposnion of an evolutionary model lor this segment of the Atlantic Equatorial Margin; this model that can be applied to the whole Margin, as well. This segmentof the Atlantic Equatorial Margin was delormedin an early E-W (when considered lhe present-day position of the South American Plate) transcurrent to transform regime with dextral kinematics, started Irom, at least, the Early Aptian, which left its record in several outcrops along the continental margin of the Ceará State and specilically in the Xaréu off Field. The continuous operation of the regime, through the Albian and later periods, led to the definitive separation between the South American and African plates, with the formation of oceanic lithosphere between the two continental blocks, due to the emplacement off spreading centers. This process involved the subsequent transition of the transcurrent to a translorm dextral regime, creating lhe Equatorial Atlantic Oceano With the separation between the South American and African plates already completed and the increasing separation between lhe continental masses, other tecton ic mechanisms began to act during the Cenozoic (even though the Cretaceous tectonic regime lasted until the Neogene), like an E-W compressive stress líeld (related to the spreading olthe oceanic floor along lhe M id-Atlantic Ridge and to the compression of the Andean Chain) effective Irom the Late Cretaceous, and a state of general extension olthe horizontal surface (due to the thermal uplift ofthe central portion of Borborema Province), effective during the Neogene. The overlap of these mechanisms during the Cenozoic led to the imprint of a complex tectonic framework, which apparently influenced the migration and entrapment 01 hydrocarbon in the Ceará Basin

Eosinófilos e proteína catiônica eosinofílica na urina: uma nova abordagem para o diagnóstico da inflamação renal no lúpus eritematoso sistêmico

Universidade Estadual do Rio Grande do Norte

Expansão urbana de Mossoró :(período de 1980 a 2004)

The purpose of this Academic Work is to identify the process of urban expansion of Mossoro city, connect them with the economy that moves the society of Mossoro. This analysis is about the period from 1980 to 2004 and the economy activities selected are compose the structure of the Mossoro' s life, fixing shapes, functions and contents of the city territory, especially in its urban space to understand the present process of urban expansion and its relations with the dynamic of the city we recall history of this territory, wich as a urban word, connect the changes with the primary economy actives - commerce and sea salt extraction. ln this relation between the present process of urban expansion and the dynamic of the city economy, the economy activities studies where the sea salt extraction, and irrigated fruit crops organizes the space so they can be viable in all stages - production, trade and circulation - to be viable they change, amplify and build a urban space together with public policy, that also increases with the arrival of new inhabitant, service structure, mount by the public administration as well as by private resources. This work point out the needs of a development a new main plan for Mossoro, that will reorganize it's territory, but also grant the needs of its society, wich desires a more given city, where citizenship will be exercise with dignity

Experimental paracoccidioidomycosis in high and low antibody responder mice of Selection IV-A

High (H) and low (L) responder mice were selected for their ability to produce antibodies against sheep and human erythrocytes (Selection IV-A). In this selection, the difference in antibody responsiveness between H and L lines (HIV-A and LIV-A mice, respectively) was shown to depend mainly on macrophage function. The more rapid catabolism of antigens by macrophages in L mice has been suggested as the main cause of the low antibody production. Due to this high macrophage activity, L animals have been described as more resistant than H animals to intracellular pathogens. These animals were utilized as an experimental model of paracoccidioidomycosis. HIV-A and LIV-A mice were infected with Paracoccidioides brasiliensis by the intravenous route. As expected, H mice were more susceptible to P. brasiliensis with a shorter survival time and higher levels of specific antibodies when compared to L mice. Contrasting with the survival time, the lungs, spleen and liver from H mice showed typical nodular granulomas containing epithelioid and giant cells and few fungi. on the other hand, in LN-A mice, the lesions of these organs were characterized by looser granulomas with irregular borders and the presence of a large number of fungi, However, the adrenal gland showed different lesion patterns. In H mice these lesions were extensive and characterized by loose granulomas with numerous fungi, while in LIV-A mice the lesions were small and limited to the cortex. Moreover the HIV-A mice presented higher levels of serum corticosterone when compared to LIV-A ones. The higher susceptibility of H mice could be attributed to the extensive lesions of the adrenal glands. These results suggest the use of the H line from the IV-A Selection as an experimental model for further studies of adrenal involvement in paracoccidioidomycosis.

Comparison of efficiency between two artificial insemination methods using frozen-thawed semen in domestic cat (Felis catus) Artificial insemination in domestic cats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Search for heavy Majorana neutrinos in mu(+/-)mu(+/-) + jets and e(+/-)e(+/-) + jets events in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)