Estudo da viabilidade de produção da peça alimentação/ladrão para banheiras

The product development field daily works in the chase of new materials and technologies that fulfills the requirements of the consumer market. So, projects are developed in order to theoretically predict what will actually happen. The production of household appliance is not different. To provide a pleasant bath to the costumer, the manufacture of a bathtub counts on many components. With this in mind, this work goal is to study the possibility of production by plastic injection of the assembly water source/overflow pipe used in bathtubs and compare its production cost with the cost of the assembly acquired from third parties. The injection process is widely used on the world stage because of its numerous advantages, however, due to the high cost of the molds, it is important to estimate the time required for the return of the initial investment. To do this, a model was designed to examine its dimensions and then initiate the study of the possibility to inject the components with the available injection machine and the production cycle. With the results, it was found that there was a reduction in the cost of the finished assembly, but a very long time to return the initial investment due to the current financial scenery of the country

Simulação da suspensão tipo duplo A de um veículo off-road através do histórico de excitação do solo

The search for mechanical components validation methods, employed in product development sector, becomes more avid for less expensive solutions. As a result, programs that can simulate forces acting on a given part through finite element method are gaining more space in the market, once this process consumes less capital when compared to currently-employed empirical validation. This article shows the simulation of an off-road prototype suspension through such technique, using ground excitation history coming from field measurements and also by making use of a specific tool for obtaining dynamic loads from the model in question. The results shown at the end is key for future enhancements aiming mass reduction, for example, that may be executed on the prototype suspension system discussed here

Análise do processo de preparação da produção no desenvolvimento de novos produtos por meio de um estudo de caso em uma empresa do setor siderúrgico

A demanda por novos produtos tem aumentado em algumas empresas do setor siderúrgico, indicando uma crescente preocupação com o desempenho do processo de desenvolvimento de produtos (PDP), que depende de vários elementos conceituais importantes apontados na literatura. Em uma empresa siderúrgica, um fator relevante é o projeto do processo de produção, devido à característica de ser um processo de fabricação contínuo e por, geralmente, envolver investimentos significativos na fase de preparação da produção. Nesse contexto, o presente trabalho busca realizar uma análise desta fase em uma empresa siderúrgica. Pretende-se, por meio da abordagem metodológica de estudo de caso, identificar práticas organizacionais, focando nos aspectos operacionais e suas interfaces, envolvendo as áreas funcionais de marketing, engenharia do produto e manufatura. Também é tratada no trabalho a integração dos times multidisciplinares, a tomada de decisão e os critérios para avaliação dos resultados do PDP. O trabalho conclui que a empresa analisada utiliza-se de práticas que estruturam a preparação da produção e que a integração interfuncional das áreas é o que se destaca para o sucesso do PDP.

Uma investigação sobre a relação entre o projeto do produto e produção em uma montadora automotiva e fornecedores de motores que adotam a modularidade

A modularidade pode ser entendida como um conjunto de conceitos que leva a novas possibilidades de arquitetura de produto, bem como novas maneiras de organização da produção, possibilitando a transferência de atividades ao longo da cadeia de suprimentos automotiva. Nesse contexto, o objetivo deste trabalho é investigar o emprego da modularidade no projeto de produto e na produção, considerando uma situação de relação específica entre uma montadora de veículos comerciais e fornecedores de motores, no âmbito do consórcio modular. É também analisada a relação entre a modularidade no projeto de produto e na produção. Para a consecução desses objetivos é adotada a abordagem metodológica de estudo de caso. Os resultados apresentam algumas influências que ocorrem entre o projeto do produto e a produção e vice-versa, uma parte delas esperadas, reforçando o caráter confirmatório dos dados coletados. Constata-se que o conceito de modularidade pode ser aplicado ao processo produtivo sem necessariamente que o produto tenha sido concebido em módulos, ou seja, a partir de um produto existente é possível montar seus componentes formando subconjuntos em uma lógica modular. Os dados confirmam ainda que a estrutura do produto de um veículo comercial favorece a sua divisão em módulos. Adicionalmente, a gestão da cadeia de suprimentos na montadora é simplificada em comparação ao sistema de produção convencional, pois parte das responsabilidades da montadora é transferida para os fornecedores.

An initial proposal for PDP of smes developing hospital furniture

A large percentage of the industrial SMEs has an organizational structure for product development too far from the adequate practices and models, elaborated by renowned authors with expertise in the theme of product development. On the other hand, the authors state that SMEs obtain considerable advantages by adopting a model of product development process (PDP) management. Healt is one of the most innovative sectors in the world, and countries like Brazil and Colombia are transitioning from a system that cares for contagious infecttions diseases where the drug product is the main form of treatment - to a system that cares for chronic degenerative conditions - where the equipment, including hospital furniture, has more relevance to the treatment. This change is offering better opportunities of specialized markets to hospital furniture SMEs that adopt an adquate PDF model. The present study proposes a first outline of a model of PDP management for industrial metal-mechanical SMEs that develop and manufacture hospital furniture, from a review of models proposed for great mechanical area.

Strumenti e metodi per lo sviluppo prodotto di lenti oftalmiche

The recent introduction of free form NC machining in the ophthalmic field involved a full review of the former product development process both from the design and the manufacturing viewpoint. Aim of the present work is to investigate and to set up innovative methods and tools supporting the product development, particularly for lenses characterized by free form geometry, as e.g. progressive lenses. In the design stage, the research addressed geometric modeling of complex lens shapes and relevant analysis tools for the optical-geometrical characterization of the produced models. In the manufacturing stage, the main interest was focused on the set-up of the fabrication process, particularly on the NC machining process for which an integration CADCAM software was developed for the generation and the simulation of the machining cycle. The methodologies and tools made available by the present work are currently used in the development of new complex geometry product typologies as, e.g. progressive lenses.

Deposition, imaging, and clearance: what remains to be done?

Deposition and clearance studies are used during product development and in fundamental research. These studies mostly involve radionuclide imaging, but pharmacokinetic methods are also used to assess the amount of drug absorbed through the lungs, which is closely related to lung deposition. Radionuclide imaging may be two-dimensional (gamma scintigraphy or planar imaging), or three-dimensional (single photon emission computed tomography and positron emission tomography). In October 2009, a group of scientists met at the "Thousand Years of Pharmaceutical Aerosols" conference in Reykjavik, Iceland, to discuss future research in key areas of pulmonary drug delivery. This article reports the session on "Deposition, imaging and clearance." The objective was partly to review our current understanding, but more importantly to assess "what remains to be done?" A need to standardize methodology and provide a regulatory framework by which data from radionuclide imaging methods could be compared between centers and used in the drug approval process was recognized. There is also a requirement for novel radiolabeling methods that are more representative of production processes for dry powder inhalers and pressurized metered dose inhalers. A need was identified for studies to aid our understanding of the relationship between clinical effects and regional deposition patterns of inhaled drugs. A robust methodology to assess clearance from small conducting airways should be developed, as a potential biomarker for therapies in cystic fibrosis and other diseases. The mechanisms by which inhaled nanoparticles are removed from the lungs, and the factors on which their removal depends, require further investigation. Last, and by no means least, we need a better understanding of patient-related factors, including how to reduce the variability in pulmonary drug delivery, in order to improve the precision of deposition and clearance measurements.

Mainstreaming a Decade's Experiences in Watershed Management to Meet the Challenges of Environmental Change in the Hindu Kush-Himalayas

Like other mountain areas in the world, the Hindu Kush-Himalayan (HKH) region is particularly vulnerable to climate change. Ongoing climate change processes are projected to have a high impact on the HKH region, and accelerated warming has been reported in the Himalayas. These climate change impacts will be superimposed on a variety of other environmental and social stresses, adding to the complexity of the issues. The sustainable use of natural resources is crucial to the long-term stability of the fragile mountain ecosystems in the HKH and to sustain the socio-ecological resilience that forms the basis of sustainable livelihoods in the region. In order to be prepared for these challenges, it is important to take stock of previous research. The ‘People and Resource Dynamics Project’ (PARDYP), implemented by International Centre for Integrated Mountain Development (ICIMOD), provides a variety of participatory options for sustainable land management in the HKH region. The PARDYD project was a research for development project that operated in five middle mountain watersheds across the HKH – two in Nepal and one each in China, India, and Pakistan. The project ran from 1996 to 2006 and focused on addressing the marginalisation of mountain farmers, the use and availability of water, issues relating to land and forest degradation and declining soil fertility, the speed of regeneration of degraded land, and the ability of the natural environment to support the growing needs of the region’s increasing population. A key learning from the project was that the opinion of land users is crucial to the acceptance (and, therefore, successful application) of new technologies and approaches. A major challenge at the end of every project is to promote knowledge sharing and encourage the cross-fertilization of ideas (e.g., in the case of PARDYP, with other middle mountain inhabitants and practitioners in the region) and to share lessons learned with a wider audience. This paper will highlight how the PARDYP findings, including ways of addressing soil fertility and water scarcity, have been mainstreamed in the HKH region through capacity building (international, regional, and national training courses), networking, and the provision of backstopping services. In addition, in view of the challenges in watershed management in the HKH connected to environmental change, the lessons learned from the PARDYP are now being used by ICMOD to define and package climate change proof technology options to address climate change adaptation.