The effects of semantic and syntactic instruction on user performance and satisfaction in search user interface design

The design of interfaces to facilitate user search has become critical for search engines, ecommercesites, and intranets. This study investigated the use of targeted instructional hints to improve search by measuring the quantitative effects of users' performance and satisfaction. The effects of syntactic, semantic and exemplar search hints on user behavior were evaluated in an empirical investigation using naturalistic scenarios. Combining the three search hint components, each with two levels of intensity, in a factorial design generated eight search engine interfaces. Eighty participants participated in the study and each completed six realistic search tasks. Results revealed that the inclusion of search hints improved user effectiveness, efficiency and confidence when using the search interfaces, but with complex interactions that require specific guidelines for search interface designers. These design guidelines will allow search designers to create more effective interfaces for a variety of searchapplications.

Análise das principais variáveis na flotação industrial do complexo de mineração de Tapira - MG

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

Design concept evaluation based on rough number and information entropy theory

Concept evaluation at the early phase of product development plays a crucial role in new product development. It determines the direction of the subsequent design activities. However, the evaluation information at this stage mainly comes from experts' judgments, which is subjective and imprecise. How to manage the subjectivity to reduce the evaluation bias is a big challenge in design concept evaluation. This paper proposes a comprehensive evaluation method which combines information entropy theory and rough number. Rough number is first presented to aggregate individual judgments and priorities and to manipulate the vagueness under a group decision-making environment. A rough number based information entropy method is proposed to determine the relative weights of evaluation criteria. The composite performance values based on rough number are then calculated to rank the candidate design concepts. The results from a practical case study on the concept evaluation of an industrial robot design show that the integrated evaluation model can effectively strengthen the objectivity across the decision-making processes.

The effect of personality on the design team:lessons from industry for design education

This study examines the effect of individual character types in design teams through case studies at ARUP associates and five United Kingdom university design degree programmes. By observing an individual's approach and contribution within a team, patterns of design behaviour are highlighted and compared within the industrial and academic examples. Initial findings have identified discreet differences in design approach and ways of working. By identifying these initial character clusters, design behaviour can be predicted to help teams and individuals to strengthen their design process. This research brings together: 1. The design process and how engineering and design teams work to solve problems. 2. The natural characteristics of individuals and how they approach problems. This difference of approach can be viewed in relation to the design process where engineers and designers will recognise their preference for certain stages of the design process. This study suggests that these individual preferences are suited to different stages of the design process, and that industry uses teams to ensure a broad range of views, an approach design education would do well to apply by establishing collaborative input in the design process.

THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

Information ethics in the age of digital labour and the surveillance-industrial complex

Thee rise of computing and the internet have brought about an ethical eld of studies that some term information ethics, computer ethics, digital media ethics, or internet ethics e aim of this contribution is to discuss information ethics’ foundations in the context of the internet’s political economy e chapter rst looks to ground the analysis in a comparison of two information ethics approaches, namely those outlined by Rafael Capurro and Luciano Floridi It then develops, based on these foundations, analyses of the information ethical dimensions of two important areas of social media: one concerns the framing of social media by a surveillance-industrial complex in the context of Edward Snowden’s revelations and the other deals with issues of digital labour processes and issues of class that arises in this context e contribution asks ethical questions about these two phenomena that bring up issues of power, exploitation, and control in the information age It asks if, and if so, how, the approaches of Capurro and Floridi can help us to understand ethico-political aspects of the surveillance-industrial complex and digital labour

Curating in the post-industrial landscape case study: Ambika P3

An analysis of curating in the post-industrial landscape using the venue of Ambika P3, University of Westminster as a case study.

Filming the Post-Fordist Worker: From Industrial Hollywood to Digital Biopolitics

Article co-authored with Dr Halligan on post-fordist work in cinema from Hollywood and 1980s films like Secret of my Success to Boss of it All and The Social Network. This article argues that new approaches to film and post-fordist work are needed and draws upon the post-autonomist thought of Hardt, Negri, Lazzarato and Virno.

Hur grafiska formgivare runt om i världen uppfattar skandinavisk grafisk design

Syftet med föreliggande studie har varit att kartlägga hur grafiska formgivare runt om i världen uppfattar skandinavisk grafisk design. 53 deltagare från industriländer deltog i studien som använde en kombination av mail-intervjuer och enkäter. Resultaten från denna studie indikerar att, oavsett kontinent, upplevs skandinavisk grafisk design som enkel och funktionell. Layouten uppfattades som rutnätsbaserad med mycket ljusrum och få grafiska element. Monokroma färger som svart, vit och grå utan gradienter och skuggor uppfattades som typiska för skandinavisk grafisk design; följt av jord- och pastellfärger. Sanserifer var mest förknippade med skandinavisk grafisk design. Motiv ansågs i denna studie att användas sparsamt, men när de används avbildar de naturen eller geometriska former. Foton och illustrationer ansågs användas ungefär lika mycket, illustrationer hade en smärre större preferens. Den upplevda påverkan av skandinavisk grafisk design varierade mellan deltagarna. Deltagarna som tyckte att påverkan var stor, ansåg att detta berodde på förespråkandet av enkelhet och funktion, sammanflätning av designområden och/eller frammaning av hållbar grafisk design. Deltagarna som ansåg att påverkan var låg, tyckte att för lite publicitet var en bidragande faktor.De flesta deltagarna i denna undersökning ansåg att skandinavisk grafisk design var enklare i jämförelse med vad de kunde se i sina hemländer. Vidare tyckte afrikanska, asiatiska och sydamerikanska deltagare  att färgerna hade lägre kroma.

Commercial and Industrial Network Improvement and Programming Policy, Summary, 1991

The Commercial and Industrial Network improvement and programming policy reflected in this summary report was adopted for use in future highway programming by the Transportation Commission on November 5, 1991. The Iowa Department of Transportation, as directed by the Legislature, has established a 2,331-mile network of commercial and industrial highways and is directing a significant amount of primary construction funding resources toward improvements to this network. This summary outlines the technical needs assessment for improvements on the Commercial and Industrial Network for the next 20-year period. The portions of the network which require four-lane capacity, as well as major improvements to the two-lane sections, are graphically displayed. Detailed improvement needs and costs are listed in tabular form for the first two five-year periods (1992-1996 and 1997-2001). It is essential to note that these improvement needs are the result of a technical assessment and do not imply any funding commitment.

The Design with Intent Method: a design tool for influencing user behaviour

Using product and system design to influence user behaviour offers potential for improving performance and reducing user error, yet little guidance is available at the concept generation stage for design teams briefed with influencing user behaviour. This article presents the Design with Intent Method, an innovation tool for designers working in this area, illustrated via application to an everyday human–technology interaction problem: reducing the likelihood of a customer leaving his or her card in an automatic teller machine. The example application results in a range of feasible design concepts which are comparable to existing developments in ATM design, demonstrating that the method has potential for development and application as part of a user-centred design process.

Making the user more efficient: Design for sustainable behaviour

User behaviour is a significant determinant of a product’s environmental impact; while engineering advances permit increased efficiency of product operation, the user’s decisions and habits ultimately have a major effect on the energy or other resources used by the product. There is thus a need to change users’ behaviour. A range of design techniques developed in diverse contexts suggest opportunities for engineers, designers and other stakeholders working in the field of sustainable innovation to affect users’ behaviour at the point of interaction with the product or system, in effect ‘making the user more efficient’. Approaches to changing users’ behaviour from a number of fields are reviewed and discussed, including: strategic design of affordances and behaviour-shaping constraints to control or affect energyor other resource-using interactions; the use of different kinds of feedback and persuasive technology techniques to encourage or guide users to reduce their environmental impact; and context-based systems which use feedback to adjust their behaviour to run at optimum efficiency and reduce the opportunity for user-affected inefficiency. Example implementations in the sustainable engineering and ecodesign field are suggested and discussed.

Exploring design patterns for sustainable behaviour

Products and services explicitly intended to influence users’ behaviour are increasingly being proposed to reduce environmental impact and for other areas of social benefit. Designing such interventions often involves adopting and adapting principles from other contexts where behaviour change has been studied. The ‘design pattern’ form, used in software engineering and HCI, and originally developed in architecture, offers benefits for this transposition process. This article introduces the Design with Intent toolkit, an idea generation method using a design pattern form to help designers address sustainable behaviour problems. The article also reports on exploratory workshops in which participants used the toolkit to generate concepts for redesigning everyday products—kettles, curtains, printers and bathroom sinks/taps—to reduce the environmental impact of use. The concepts are discussed, along with observations of how the toolkit was used by participants, suggesting usability improvements to incorporate in future versions.

Designing motivation or motivating design? Exploring Service Design, motivation and behavioural change

Motivation researcher Edward Deci has suggested that if we want behavioural change to be sustainable, we have to move past thinking of motivation as something that we ‘do’ to other people and see it rather as something that we as Service Designers can enable service users to ‘do’ by themselves. In this article, Fergus Bisset explores the ways in which Service Designers can create more motivating services. Dan Lockton then looks at where motivating behaviour via Service Design often starts, with the basic ‘pinball’ and ‘shortcut’ approaches. We conclude by proposing that if services are to be sustainable in the long term, we as Service Designers need to strive to accommodate humans' differing levels of motivation and encourage and support service users' sense of autonomy within the services we design.

Design for sustainability: making green behaviour easy

Design can enable sustainable behaviour by understanding everyday needs rather than treating people as the problem.