Trends in life expectancy of HIV-positive adults on antiretroviral therapy across the globe: comparisons with general population.

PURPOSE OF REVIEW Improved virological and immunological outcomes and reduced toxicity of antiretroviral combination therapy (ART) raise the hope that life expectancy of HIV-positive persons on ART will approach that of the general population. We systematically review the literature and summarize published estimates of life expectancy of HIV-positive populations on ART. We compare their life expectancy with the life expectancy of the general or, in sub-Saharan Africa, HIV-negative populations, by time period and gender. RECENT FINDINGS Ten relevant studies were published from 2006 to 2015. Three studies were from Canada, two from European countries, three from sub-Saharan Africa and two were multicountry studies. Life expectancy increased over time in all studies and regions. Expressed as the percentage of life expectancy in the HIV-negative or general population, estimated life expectancy at age 20 years in HIV-positive people on ART ranged from 60.3% (95% CI 58.0-62.6%) in Rwanda (2008-2011) to 89.1% (95% CI 84.7-93.6%) in Canada (2008-2012). The percentage of life expectancy in the HIV-negative or general population achieved was higher in HIV-positive women than in HIV-positive men in all countries, except for Canada wherein the opposite was the case. SUMMARY Life expectancy in HIV-positive people on ART has improved worldwide in recent years, but important gaps remain compared with the general and HIV-negative population, and between regions and genders.

GENERAL WELL-BEING AND USE OF SOCIAL SUPPORT

Research interest on well-being and social support has focused largely on social factors as related to attaining and maintaining well-being, self-perceptions of well-being and to a lesser extent the relationship of current level of self-perceived well-being to use of formal or informal sources of social support. This study analyzed responses to the General Well-Being Schedule of 6,913 subjects (25-74 years) interviewed during the National Health and Nutrition Examination Survey (1971-1975). The purpose of this analysis was to relate the level of GWBS scores to the use of social support, both informal (family and friends) and formal (community professionals).^ Study questions addressed were whether well-being level was related to selection of a specific social support resource and/or rate of use of resources and whether gender differences were apparent in level of well-being and social support use. Because age, sex, race, socioeconomic status (income and education) and marital status may confound the relation between level of GWB and type of social support chosen, the association between these variables with GWB and use of social support were considered. For analysis, test scores were grouped into four categories and for detailed analysis, two categories: low (0-70) and high (71-110). Cross tabulations and percentages were computed and the chi-square test of significance was used.^ Although 16 to 25 percent of the sample population reported low well-being, less than 10 percent used formal resources to discuss emotional, mental or behavior problems. Medical resources, mostly physicians, were the most used formal social supports. Informal social support was important for all well-being levels where 65-77% of each category reported using this resource.^ While well-being level does not appear to serve as a screener/selector of type of formal social support used, it is related to rates of use. Females reported slightly lower well-being than males, and except in the lowest well-being group, had higher rates of social support use. Findings support the conclusion that perceived well-being is related to use of social support such that the lower the well-being, the greater tendency to use formal and/or informal social support. ^

The information bottleneck method for genome-wide association studies

In population studies, most current methods focus on identifying one outcome-related SNP at a time by testing for differences of genotype frequencies between disease and healthy groups or among different population groups. However, testing a great number of SNPs simultaneously has a problem of multiple testing and will give false-positive results. Although, this problem can be effectively dealt with through several approaches such as Bonferroni correction, permutation testing and false discovery rates, patterns of the joint effects by several genes, each with weak effect, might not be able to be determined. With the availability of high-throughput genotyping technology, searching for multiple scattered SNPs over the whole genome and modeling their joint effect on the target variable has become possible. Exhaustive search of all SNP subsets is computationally infeasible for millions of SNPs in a genome-wide study. Several effective feature selection methods combined with classification functions have been proposed to search for an optimal SNP subset among big data sets where the number of feature SNPs far exceeds the number of observations. ^ In this study, we take two steps to achieve the goal. First we selected 1000 SNPs through an effective filter method and then we performed a feature selection wrapped around a classifier to identify an optimal SNP subset for predicting disease. And also we developed a novel classification method-sequential information bottleneck method wrapped inside different search algorithms to identify an optimal subset of SNPs for classifying the outcome variable. This new method was compared with the classical linear discriminant analysis in terms of classification performance. Finally, we performed chi-square test to look at the relationship between each SNP and disease from another point of view. ^ In general, our results show that filtering features using harmononic mean of sensitivity and specificity(HMSS) through linear discriminant analysis (LDA) is better than using LDA training accuracy or mutual information in our study. Our results also demonstrate that exhaustive search of a small subset with one SNP, two SNPs or 3 SNP subset based on best 100 composite 2-SNPs can find an optimal subset and further inclusion of more SNPs through heuristic algorithm doesn't always increase the performance of SNP subsets. Although sequential forward floating selection can be applied to prevent from the nesting effect of forward selection, it does not always out-perform the latter due to overfitting from observing more complex subset states. ^ Our results also indicate that HMSS as a criterion to evaluate the classification ability of a function can be used in imbalanced data without modifying the original dataset as against classification accuracy. Our four studies suggest that Sequential Information Bottleneck(sIB), a new unsupervised technique, can be adopted to predict the outcome and its ability to detect the target status is superior to the traditional LDA in the study. ^ From our results we can see that the best test probability-HMSS for predicting CVD, stroke,CAD and psoriasis through sIB is 0.59406, 0.641815, 0.645315 and 0.678658, respectively. In terms of group prediction accuracy, the highest test accuracy of sIB for diagnosing a normal status among controls can reach 0.708999, 0.863216, 0.639918 and 0.850275 respectively in the four studies if the test accuracy among cases is required to be not less than 0.4. On the other hand, the highest test accuracy of sIB for diagnosing a disease among cases can reach 0.748644, 0.789916, 0.705701 and 0.749436 respectively in the four studies if the test accuracy among controls is required to be at least 0.4. ^ A further genome-wide association study through Chi square test shows that there are no significant SNPs detected at the cut-off level 9.09451E-08 in the Framingham heart study of CVD. Study results in WTCCC can only detect two significant SNPs that are associated with CAD. In the genome-wide study of psoriasis most of top 20 SNP markers with impressive classification accuracy are also significantly associated with the disease through chi-square test at the cut-off value 1.11E-07. ^ Although our classification methods can achieve high accuracy in the study, complete descriptions of those classification results(95% confidence interval or statistical test of differences) require more cost-effective methods or efficient computing system, both of which can't be accomplished currently in our genome-wide study. We should also note that the purpose of this study is to identify subsets of SNPs with high prediction ability and those SNPs with good discriminant power are not necessary to be causal markers for the disease.^

An analysis of the RightCare policy at Ben Taub General Hospital, Houston, Texas

Introduction. This study is a two-part evaluation of the RightCare policy, a policy implemented to reduce crowding at the Emergency Center (EC) at Ben Taub General Hospital in Houston, Harris County, Texas. This research includes an evaluation of the policy's impact on specific hospital measures, along with a description of the policy's demise from the point of view of hospital staff. Objective. The purpose of this study is two-fold: (1) To determine whether RightCare policy affected the level of crowding in the Emergency Center and (2) to identify the conditions that may have led to the policy's demise. Methods. For the policy impact portion of this research, hospital measures were collected from existing databases. Analysis included a pre-post comparative design in which the 12 months preceding the policy's implementation were compared with the 12 months following the policy's implementation. For the policy perception portion, employees were surveyed using an on-line questionnaire. Results. The results of the study are mixed. Some measures improved, including time spent on ambulance diversion and the proportion of those who left without being seen, while others did not, such as return visits and total length of stay. Employees generally supported the policy, but expressed concerns over insufficient training and funding. Conclusion. The RightCare policy was a good initial attempt to improve crowded conditions in the EC. The study showed that a clearer policy design, improved training, adequate staffing levels, and better communication would improve operational outcomes in the future.^

The effect of chronic arthritis and hypertension on general well-being

The purpose of the investigation is to elucidate the effect of chronic symptomatic and asymptomatic disease, i.e. arthritis and hypertension, on general well-being, and to quantify the contribution that the duration of the disorder makes to this effect. The data is drawn from the National Health and Nutrition Examination Survey (NHANES I). The results show that arthritics do not have a significant effect on GWB scores while hypertension has a significantly negative impact on GWB. The most striking difference is seen between those without knowledge of hypertension and those recently diagnosed. This difference is attributed to the labeling effect on changes in perceived wellness. ^

Some techniques for automated, resource-aware distributed and mobile computing in a multi-paradigm programming system

Distributed parallel execution systems speed up applications by splitting tasks into processes whose execution is assigned to different receiving nodes in a high-bandwidth network. On the distributing side, a fundamental problem is grouping and scheduling such tasks such that each one involves sufñcient computational cost when compared to the task creation and communication costs and other such practical overheads. On the receiving side, an important issue is to have some assurance of the correctness and characteristics of the code received and also of the kind of load the particular task is going to pose, which can be specified by means of certificates. In this paper we present in a tutorial way a number of general solutions to these problems, and illustrate them through their implementation in the Ciao multi-paradigm language and program development environment. This system includes facilities for parallel and distributed execution, an assertion language for specifying complex programs properties (including safety and resource-related properties), and compile-time and run-time tools for performing automated parallelization and resource control, as well as certification of programs with resource consumption assurances and efñcient checking of such certificates.

An abstract machine based execution model for computer architecture design and efficient implementation of logic programs in parallel.

The term "Logic Programming" refers to a variety of computer languages and execution models which are based on the traditional concept of Symbolic Logic. The expressive power of these languages offers promise to be of great assistance in facing the programming challenges of present and future symbolic processing applications in Artificial Intelligence, Knowledge-based systems, and many other areas of computing. The sequential execution speed of logic programs has been greatly improved since the advent of the first interpreters. However, higher inference speeds are still required in order to meet the demands of applications such as those contemplated for next generation computer systems. The execution of logic programs in parallel is currently considered a promising strategy for attaining such inference speeds. Logic Programming in turn appears as a suitable programming paradigm for parallel architectures because of the many opportunities for parallel execution present in the implementation of logic programs. This dissertation presents an efficient parallel execution model for logic programs. The model is described from the source language level down to an "Abstract Machine" level suitable for direct implementation on existing parallel systems or for the design of special purpose parallel architectures. Few assumptions are made at the source language level and therefore the techniques developed and the general Abstract Machine design are applicable to a variety of logic (and also functional) languages. These techniques offer efficient solutions to several areas of parallel Logic Programming implementation previously considered problematic or a source of considerable overhead, such as the detection and handling of variable binding conflicts in AND-Parallelism, the specification of control and management of the execution tree, the treatment of distributed backtracking, and goal scheduling and memory management issues, etc. A parallel Abstract Machine design is offered, specifying data areas, operation, and a suitable instruction set. This design is based on extending to a parallel environment the techniques introduced by the Warren Abstract Machine, which have already made very fast and space efficient sequential systems a reality. Therefore, the model herein presented is capable of retaining sequential execution speed similar to that of high performance sequential systems, while extracting additional gains in speed by efficiently implementing parallel execution. These claims are supported by simulations of the Abstract Machine on sample programs.

Contribution to multiuser videoconferencing systems based on cloud computing

Multi-user videoconferencing systems offer communication between more than two users, who are able to interact through their webcams, microphones and other components. The use of these systems has been increased recently due to, on the one hand, improvements in Internet access, networks of companies, universities and houses, whose available bandwidth has been increased whilst the delay in sending and receiving packets has decreased. On the other hand, the advent of Rich Internet Applications (RIA) means that a large part of web application logic and control has started to be implemented on the web browsers. This has allowed developers to create web applications with a level of complexity comparable to traditional desktop applications, running on top of the Operating Systems. More recently the use of Cloud Computing systems has improved application scalability and involves a reduction in the price of backend systems. This offers the possibility of implementing web services on the Internet with no need to spend a lot of money when deploying infrastructures and resources, both hardware and software. Nevertheless there are not many initiatives that aim to implement videoconferencing systems taking advantage of Cloud systems. This dissertation proposes a set of techniques, interfaces and algorithms for the implementation of videoconferencing systems in public and private Cloud Computing infrastructures. The mechanisms proposed here are based on the implementation of a basic videoconferencing system that runs on the web browser without any previous installation requirements. To this end, the development of this thesis starts from a RIA application with current technologies that allow users to access their webcams and microphones from the browser, and to send captured data through their Internet connections. Furthermore interfaces have been implemented to allow end users to participate in videoconferencing rooms that are managed in different Cloud provider servers. To do so this dissertation starts from the results obtained from the previous techniques and backend resources were implemented in the Cloud. A traditional videoconferencing service which was implemented in the department was modified to meet typical Cloud Computing infrastructure requirements. This allowed us to validate whether Cloud Computing public infrastructures are suitable for the traffic generated by this kind of system. This analysis focused on the network level and processing capacity and stability of the Cloud Computing systems. In order to improve this validation several other general considerations were taken in order to cover more cases, such as multimedia data processing in the Cloud, as research activity has increased in this area in recent years. The last stage of this dissertation is the design of a new methodology to implement these kinds of applications in hybrid clouds reducing the cost of videoconferencing systems. Finally, this dissertation opens up a discussion about the conclusions obtained throughout this study, resulting in useful information from the different stages of the implementation of videoconferencing systems in Cloud Computing systems. RESUMEN Los sistemas de videoconferencia multiusuario permiten la comunicación entre más de dos usuarios que pueden interactuar a través de cámaras de video, micrófonos y otros elementos. En los últimos años el uso de estos sistemas se ha visto incrementado gracias, por un lado, a la mejora de las redes de acceso en las conexiones a Internet en empresas, universidades y viviendas, que han visto un aumento del ancho de banda disponible en dichas conexiones y una disminución en el retardo experimentado por los datos enviados y recibidos. Por otro lado también ayudó la aparación de las Aplicaciones Ricas de Internet (RIA) con las que gran parte de la lógica y del control de las aplicaciones web comenzó a ejecutarse en los mismos navegadores. Esto permitió a los desarrolladores la creación de aplicaciones web cuya complejidad podía compararse con la de las tradicionales aplicaciones de escritorio, ejecutadas directamente por los sistemas operativos. Más recientemente el uso de sistemas de Cloud Computing ha mejorado la escalabilidad y el abaratamiento de los costes para sistemas de backend, ofreciendo la posibilidad de implementar servicios Web en Internet sin la necesidad de grandes desembolsos iniciales en las áreas de infraestructuras y recursos tanto hardware como software. Sin embargo no existen aún muchas iniciativas con el objetivo de realizar sistemas de videoconferencia que aprovechen las ventajas del Cloud. Esta tesis doctoral propone un conjunto de técnicas, interfaces y algoritmos para la implentación de sistemas de videoconferencia en infraestructuras tanto públicas como privadas de Cloud Computing. Las técnicas propuestas en la tesis se basan en la realización de un servicio básico de videoconferencia que se ejecuta directamente en el navegador sin la necesidad de instalar ningún tipo de aplicación de escritorio. Para ello el desarrollo de esta tesis parte de una aplicación RIA con tecnologías que hoy en día permiten acceder a la cámara y al micrófono directamente desde el navegador, y enviar los datos que capturan a través de la conexión de Internet. Además se han implementado interfaces que permiten a usuarios finales la participación en salas de videoconferencia que se ejecutan en servidores de proveedores de Cloud. Para ello se partió de los resultados obtenidos en las técnicas anteriores de ejecución de aplicaciones en el navegador y se implementaron los recursos de backend en la nube. Además se modificó un servicio ya existente implementado en el departamento para adaptarlo a los requisitos típicos de las infraestructuras de Cloud Computing. Alcanzado este punto se procedió a analizar si las infraestructuras propias de los proveedores públicos de Cloud Computing podrían soportar el tráfico generado por los sistemas que se habían adaptado. Este análisis se centró tanto a nivel de red como a nivel de capacidad de procesamiento y estabilidad de los sistemas. Para los pasos de análisis y validación de los sistemas Cloud se tomaron consideraciones más generales para abarcar casos como el procesamiento de datos multimedia en la nube, campo en el que comienza a haber bastante investigación en los últimos años. Como último paso se ideó una metodología de implementación de este tipo de aplicaciones para que fuera posible abaratar los costes de los sistemas de videoconferencia haciendo uso de clouds híbridos. Finalmente en la tesis se abre una discusión sobre las conclusiones obtenidas a lo largo de este amplio estudio, obteniendo resultados útiles en las distintas etapas de implementación de los sistemas de videoconferencia en la nube.

Algunos retos de la protección de datos en la sociedad del conocimiento. Especial detenimiento en la computación en la nube (cloud computing).

Los continuos avances tecnológicos están trayendo consigo nuevas formas de almacenar, tratar y comunicar datos personales. Es necesario repensar el derecho fundamental a la protección de datos, y arbitrar mecanismos para adaptarlo a las nuevas formas de tratamiento. a nivel europeo se está trabajando en una nueva propuesta de regulación que consideramos, en general, muy apropiada para afrontar los nuevos retos en esta materia. para ejemplificar todo esto, en el presente estudio se plantea de forma detallada el caso de la computación en nube, sus principales características y algunas preocupaciones acerca de los riesgos potenciales que su utilización trae consigo. Abstract: Rapid technological developments are bringing new ways to store, process and communicate personal data. We need to rethink the fundamental right to data protection and adapt it to new forms of treatment. there is a new «european» proposal for a regulation on the protection of individuals with regard to the processing of personal data, well suited to meet the new challenges. this study offers one example of this: the cloud computing, its main characteristics and some concerns about the potential risks that its use entails.

The University in the Cloud Computing.

With the advancement of Information and Communication Technology ICT which favors increasingly fast, easy, and accessible communication for all and which can reach large groups of people, there have been changes, in recent years in our society that have modified the way we interact, communicate and transmit information. Access to this, it is possible, not only through computers situated in a fixed location, but new mobile devices make it available, wherever the user happens to be located. Now, information "travels" with the user. These forms of communication, transmission and access to information, have also affected the way to conceive and manage business. To these new forms of business that the Internet has brought, is now added the concept of companies in the Cloud Computing ClC. The ClC technology is based on the supply and consumption of services on demand and pay per use, and it gives a 180 degree turn to the business management concept. Small and large businesses may use the latest developments in ICT, to manage their organizations without the need for expensive investments in them. This will enable enterprises to focus more specifically within the scope of their business, leaving the ICT control to the experts. We believe that education can also and should benefit from these new philosophies. ?Due to the global economic crisis in general and each country in particular, economic cutbacks have come to most universities. These are seen in the need to raise tuition rates, which makes increasingly fewer students have the opportunity to pursue higher education?. In this paper we propose using ClC technologies in universities and we make a dissertation on the advantages that it can provide to both: universities and students. For the universities, we expose two focuses, one: ?to reorganize university ICT structures with the ClC philosophy? and the other one, ?to extend the offer of the university education with education on demand?. Regarding the former we propose to use public or private Clouds, to reuse resources across the education community, to save costs on infrastructure investment, in upgrades and in maintenance of ICT, and paying only for what you use and with the ability to scale according to needs. Regarding the latter, we propose an educational model in the ClC, to increase the current university offerings, using educational units in the form of low-cost services and where students pay only for the units consumed on demand. For the students, they could study at any university in the world (virtually), from anywhere, without travel costs: money and time, and what is most important paying only for what they consume. We think that this proposal of education on demand may represent a great change in the current educational model, because strict registration deadlines disappear, and also the problem of economically disadvantaged students, who will not have to raise large amounts of money for an annual tuition. Also it will decrease the problem of loss of the money invested in an enrollment when the student dropout. In summary we think that this proposal is interesting for both, universities and students, we aim for "Higher education from anywhere, with access from any mobile device, at any time, without requiring large investments for students, and with reuse and optimization of resources by universities. Cost by consumption and consumption by service?. We argue for a Universal University "wisdom and knowledge accessible to all?

The educational learning lifecycle and the cloud computing

Currently, student dropout rates are a matter of concern among universities. Many research studies, aimed at discovering the causes, have been carried out. However, few solutions, that could serve all students and related problems, have been proposed so far. One such problem is caused by the lack of the "knowledge chain educational links" that occurs when students move onto higher studies without mastering their basic studies. Most regulated studies imparted at universities are designed so that some basic subjects serve as support for other, more complicated, subjects, thus forming a complicated knowledge network. When a link in this chain fails, student frustration occurs as it prevents him from fully understanding the following educational links. In this proposal we try to mitigate these disasters that stem, for the most part, the student?s frustration beyond his college stay. On one hand, we make a dissertation on the student?s learning process, which we divide into a series of phases that amount to what we call the "learning lifecycle." Also, we analyze at what stage the action by the stakeholders involved in this scenario: teachers and students; is most important. On the other hand, we consider that Information and Communication Technologies ICT, such as Cloud Computing, can help develop new ways, allowing for the teaching of higher education, while easing and facilitating the student?s learning process. But, methods and processes need to be defined as to direct the use of such technologies; in the teaching process in general, and within higher education in particular; in order to achieve optimum results. Our methodology integrates, as another actor, the ICT into the "Learning Lifecycle". We stimulate students to stop being merely spectators of their own education, and encourage them to take an active part in their training process. To do this, we offer a set of useful tools to determine not only academic failure causes, (for self assessment), but also to remedy these failures (with corrective actions); "discovered the causes it is easier to determine solutions?. We believe this study will be useful for both students and teachers. Students learn from their own experience and improve their learning process, while obtaining all of the "knowledge chain educational links? required in their studies. We stand by the motto "Studying to learn instead of studying to pass". Teachers will also be benefited by detecting where and how to strengthen their teaching proposals. All of this will also result in decreasing dropout rates.

Desarrollo de software sobre entornos PaaS: revisión general, nuevas perspectivas y desafíos para la ingeniería de software

El uso de la computación en la nube ofrece un nuevo paradigma que procura proporcionar servicios informáticos para los cuales no es necesario contar con grandes infraestructuras y sobre todo, con las complejidades de costos, seguridad y mantenimiento implícitas. Si bien se ha posicionado en los últimos años como una plataforma innovadora en el ámbito de la tecnología de consumo masivo y organizacional, también puede ser tópico de investigación importante en ciertas áreas de interés como el desarrollo de Software, presentando en ese campo, una serie de ventajas y retos estimulantes que pueden ser explorados. Este trabajo de investigación, sigue con dicho sentido, el objetivo de exponer la situación actual sobre el empleo de la computación en la nube como entorno de desarrollo de Software, sectorizando a través de su capa PaaS, el modelo conceptual de trabajo, las perspectivas recientes, problemas e implicaciones generales del uso de ésta como herramienta plausible en proyectos de desarrollo de Software. El análisis de los diferentes temas abordados, tiene la intención en general, de proporcionar información objetiva, crítica y cuantitativa sobre la concentración de la investigación relacionada a PaaS, así como un marco de interpretación reciente que aporte una perspectiva referencial para futuras investigaciones asociadas.---ABSTRACT---The use of cloud computing offers a new paradigm to provide computer services for which it is not necessary to have large infrastructure and especially with the complexities of cost, safety and maintenance implied. While it has positioned itself in recent years as an innovative platform in the field of technology and massive organizational consumption, can also be an important research topic in certain areas of interest including, the development of Software, presenting in this field, a series of advantages, disadvantages and stimulating challenges that can be explored. This research, following with that sense, try to present the current situation related to the use of cloud computing as a software development environment, through its sectorized PaaS layer, showing the conceptual working model, actual perspectives, problems and general implications of using this as a possible tool in Software development projects. The analysis of the different topics covered, intends in a general form, provide objective, critical and quantitative information about the concentration of research related to PaaS, and a recent interpretation framework to provide a referential perspective for future related researches.

Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.

Idoneidad del grado de rigidez de las uniones en pórticos metálicos de naves a dos aguas en edificación agroindustrial

Para el análisis de la respuesta estructural, tradicionalmente se ha partido de la suposición de que los nudos son totalmente rígidos o articulados. Este criterio facilita en gran medida los cálculos, pero no deja de ser una idealización del comportamiento real de las uniones. Como es lógico, entre los nudos totalmente rígidos y los nudos articulados existe una gama infinita de valores de rigidez que podrían ser adoptados. A las uniones que presentan un valor distinto de los canónicos se les denomina en sentido general uniones semirrígidas. La consideración de esta rigidez intermedia complica considerablemente los cálculos estructurales, no obstante provoca cambios en el reparto de esfuerzos dentro de la estructura, así como en la configuración de las propias uniones, que en ciertas circunstancias pueden suponer una ventaja económica. Del planteamiento expuesto en el párrafo anterior, surgen dos cuestiones que serán el germen de la tesis. Estas son: ¿Qué ocurre si se aplica el concepto de uniones semirrígidas a las naves industriales? ¿Existen unos valores determinados de rigidez en sus nudos con los que se logra optimizar la estructura? Así, surge el objetivo principal de la tesis, que no es otro que conocer la influencia de la rigidez de los nudos en los costes de los pórticos a dos aguas de estructura metálica utilizados típicamente en edificios de uso agroindustrial. Para alcanzar el objetivo propuesto, se plantea una metodología de trabajo que básicamente consiste en el estudio de una muestra representativa de pórticos sometidos a tres estados de carga: bajo, medio y alto. Su rango de luces abarca desde los 8 a los 20 m y el de la altura de pilares desde los 3,5 a los 10 m. Además, se considera que sus uniones pueden adoptar valores intermedios de rigidez. De la combinatoria de las diferentes configuraciones posibles se obtienen 46.656 casos que serán objeto de estudio. Debido al fin economicista del trabajo, se ha prestado especial atención a la obtención de los costes de ejecución de las diferentes partidas que componen la estructura, incluidas las correspondientes a las uniones. Para acometer los cálculos estructurales ha sido imprescindible contar con un soporte informático, tanto existente como de creación ex profeso, que permitiese su automatización en un contexto de optimización. Los resultados del estudio consisten básicamente en una cantidad importante de datos que para su interpretación se hace imprescindible tratarlos previamente. Este tratamiento se fundamenta en su ordenación sistemática, en la aplicación de técnicas estadísticas y en la representación gráfica. Con esto se obtiene un catálogo de gráficos en los que se representa el coste total de la estructura según los diferentes valores de rigidez de sus nudos, unas matrices resumen de resultados y unos modelos matemáticos que representan la función coste total - rigideces de nudos. Como conclusiones se puede destacar: por un lado que los costes totales de los pórticos estudiados son mínimos cuando los valores de rigidez de sus uniones son bajos, concretamente de 5•10³ a 10•10³ kN•m/rad; y por otro que la utilización en estas estructuras de uniones semirrígidas con una combinación idónea de sus rigideces, supone una ventaja económica media del 18% con respecto a las dos tipologías que normalmente se usan en este tipo de edificaciones como son los pórticos biempotrados y los biarticulados. ABSTRACT Analyzing for structural response, traditionally it started from the assumption that joints are fully rigid or pinned. This criterion makes the design significantly easier, but it is also an idealization of real joint behaviour. As is to be expected, there is an almost endless range of stiffnes value between fully rigid and pinned joints, wich could be adopted. Joints with a value other than traditional are referred to generally as semi-rigid joints. If middle stiffness is considered, the structural design becomes much more complicated, however, it causes changes in the distribution of frame stresses, as well as on joints configuration, that under certain circumstances they may suppose an economic advantage. Two questions arise from the approach outlined in the preceding subparagraph, wich are the seeds of the doctoral thesis. These are: what happens when the concept of semirigid joints is applied to industrial buildings? There are certain stiffness values in their joints with which optimization of frame is achieved? This way, the main objective of the thesis arise, which is to know the influence of stiffness of joints in the cost of the steel frames with gabled roof, that they are typically used in industrial buildings. In order to achieve the proposed goal, a work methodology is proposed, which consists in essence in a study of a representative sample of frames under three load conditions: low, middle and high. Their range of spans comprises from 8 to 20 m and range of the height of columns cover from 3,5 to 10 m. Furthermore, it is considered that their joints can adopt intermediate values of stiffness. The result of the combination of different configurations options is 46.656 cases, which will be subject of study. Due to the economic aim of this work, a particular focus has been devoted for obtaining the execution cost of the different budget items that make up the structure, including those relating to joints. In order to do the structural calculations, count with a computing support has been indispensable, existing and created expressly for this purpose, which would allows its automation in a optimization context. The results of the study basically consist in a important amount of data, whose previous processing is necesary. This process is based on his systematic arrangement, in implementation of statistical techniques and in graphical representation. This give a catalogue of graphics, which depicts the whole cost of structure according to the different stiffness of its joints, a matrixes with the summary of results and a mathematical models which represent the function whole cost - stiffness of the joints. The most remarkable conclusions are: whole costs of the frames studied are minimum when the stiffness values of their joints are low, specifically 5•10³ a 10•10³ kN•m/rad; and the use of structures with semi-rigid joints and a suitable combination of their stiffness implyes an average economic advantage of 18% over other two typologies which are used typically in this kind of buildings; these are the rigid and bi-articulated frames.