Updating of an instrumented building model considering amplitude dependence of dynamic resonant properties extracted from seismic response records

The authors would like to express their gratitude to their supporters. Drs Jim Cousins, S.R. Uma and Ken Gledhill facilitated this research by providing access to GeoNet seismic data and structural building information. Piotr Omenzetter’s work within the Lloyd’s Register Foundation Centre for Safety and Reliability Engineering at the University of Aberdeen is supported by Lloyd’s Register Foundation. The Foundation helps to protect life and property by supporting engineering-related education, public engagement and the application of research.

Updating of an instrumented building model considering amplitude dependence of dynamic resonant properties extracted from seismic response records

The authors would like to express their gratitude to their supporters. Drs Jim Cousins, S.R. Uma and Ken Gledhill facilitated this research by providing access to GeoNet seismic data and structural building information. Piotr Omenzetter’s work within the Lloyd’s Register Foundation Centre for Safety and Reliability Engineering at the University of Aberdeen is supported by Lloyd’s Register Foundation. The Foundation helps to protect life and property by supporting engineering-related education, public engagement and the application of research.

Finite element model calibration of an instrumented RC building based on seismic excitation including non-structural components and soil-structure- interaction

Peer reviewed

A seasonal ARIMAX time series model for strain-temperature relationship in an instrumented bridge

Peer reviewed

Resistance to colistin : what is the fate for this antibiotic in pig production?

Colistin, a cationic polypeptide antibiotic, has reappeared in human medicine as a last-line treatment option for multidrug-resistant Gram-negative bacteria (MDR-GNB). Colistin is widely used in veterinary medicine for the treatment of gastrointestinal infections caused by Enterobacteriaceae. GNB resistant to colistin owing to chromosomal mutations have already been reported both in human and veterinary medicine, however several recent studies have just identified a plasmid-mediated mcr-1 gene encoding for colistin resistance in Escherichia coli colistin resistance. The discovery of a non-chromosomal mechanism of colistin resistance in E. coli has led to strong reactions in the scientific community and to concern among physicians and veterinarians. Colistin use in food animals and particularly in pig production has been singled out as responsible for the emergence of colistin resistance. The present review will focus mainly on the possible link between colistin use in pigs and the spread of colistin resistance in Enterobacteriaceae. First we demonstrate a possible link between Enterobacteriaceae resistance emergence and oral colistin pharmacokinetics/pharmacodynamics and its administration modalities in pigs. We then discuss the potential impact of colistin use in pigs on public health with respect to resistance. We believe that colistin use in pig production should be re-evaluated and its dosing and usage optimised. Moreover, the search for competitive alternatives to using colistin with swine is of paramount importance to preserve the effectiveness of this antibiotic for the treatment of MDR-GNB infections in human medicine.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

Hyperspectral Image Classification with Nonlinear Methods

This thesis introduces two related lines of study on classification of hyperspectral images with nonlinear methods. First, it describes a quantitative and systematic evaluation, by the author, of each major component in a pipeline for classifying hyperspectral images (HSI) developed earlier in a joint collaboration [23]. The pipeline, with novel use of nonlinear classification methods, has reached beyond the state of the art in classification accuracy on commonly used benchmarking HSI data [6], [13]. More importantly, it provides a clutter map, with respect to a predetermined set of classes, toward the real application situations where the image pixels not necessarily fall into a predetermined set of classes to be identified, detected or classified with.

The particular components evaluated are a) band selection with band-wise entropy spread, b) feature transformation with spatial filters and spectral expansion with derivatives c) graph spectral transformation via locally linear embedding for dimension reduction, and d) statistical ensemble for clutter detection. The quantitative evaluation of the pipeline verifies that these components are indispensable to high-accuracy classification.

Secondly, the work extends the HSI classification pipeline with a single HSI data cube to multiple HSI data cubes. Each cube, with feature variation, is to be classified of multiple classes. The main challenge is deriving the cube-wise classification from pixel-wise classification. The thesis presents the initial attempt to circumvent it, and discuss the potential for further improvement.

Resistance to colistin : what is the fate for this antibiotic in pig production?

Colistin, a cationic polypeptide antibiotic, has reappeared in human medicine as a last-line treatment option for multidrug-resistant Gram-negative bacteria (MDR-GNB). Colistin is widely used in veterinary medicine for the treatment of gastrointestinal infections caused by Enterobacteriaceae. GNB resistant to colistin owing to chromosomal mutations have already been reported both in human and veterinary medicine, however several recent studies have just identified a plasmid-mediated mcr-1 gene encoding for colistin resistance in Escherichia coli colistin resistance. The discovery of a non-chromosomal mechanism of colistin resistance in E. coli has led to strong reactions in the scientific community and to concern among physicians and veterinarians. Colistin use in food animals and particularly in pig production has been singled out as responsible for the emergence of colistin resistance. The present review will focus mainly on the possible link between colistin use in pigs and the spread of colistin resistance in Enterobacteriaceae. First we demonstrate a possible link between Enterobacteriaceae resistance emergence and oral colistin pharmacokinetics/pharmacodynamics and its administration modalities in pigs. We then discuss the potential impact of colistin use in pigs on public health with respect to resistance. We believe that colistin use in pig production should be re-evaluated and its dosing and usage optimised. Moreover, the search for competitive alternatives to using colistin with swine is of paramount importance to preserve the effectiveness of this antibiotic for the treatment of MDR-GNB infections in human medicine.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

The Development of a Hybrid Optimization Algorithm for the Evaluation and Optimization of the Asynchronous Pulse Unit

The effectiveness of an optimization algorithm can be reduced to its ability to navigate an objective function’s topology. Hybrid optimization algorithms combine various optimization algorithms using a single meta-heuristic so that the hybrid algorithm is more robust, computationally efficient, and/or accurate than the individual algorithms it is made of. This thesis proposes a novel meta-heuristic that uses search vectors to select the constituent algorithm that is appropriate for a given objective function. The hybrid is shown to perform competitively against several existing hybrid and non-hybrid optimization algorithms over a set of three hundred test cases. This thesis also proposes a general framework for evaluating the effectiveness of hybrid optimization algorithms. Finally, this thesis presents an improved Method of Characteristics Code with novel boundary conditions, which better characterizes pipelines than previous codes. This code is coupled with the hybrid optimization algorithm in order to optimize the operation of real-world piston pumps.

ANALYSIS OF HYPORHEIC FLOW INDUCED BY A BAR IN A GRAVEL STREAM: AN EXPERIMENTAL STUDY

Pipelines are one of the safest means to transport crude oil, but are not spill-free. This is of concern in North America, due to the large volumes of crude oil shipped by Canadian producers and the lengthy network of pipelines. Each pipeline crosses many rivers, supporting a wide variety of human activities, and rich aquatic life. However, there is a knowledge gap on the risks of contamination of river beds due to oil spills. This thesis addresses this knowledge gap by focussing on mechanisms that transport water (and contaminants) from the free surface flow to the bed sediments, and vice-versa. The work focuses on gravel rivers, in which bed sediments are sufficiently permeable that pressure gradients caused by the interactions of flow with topographic elements (gravel bars), or changes in direction induce exchanges of water between the free surface flow and the bed, known as hyporheic flows. The objectives of the thesis are: to present a new method to visualize and quantify hyporheic flows in laboratory experiments; to conduct a novel series of experiments on hyporheic flow induced by a gravel bar under different free surface flows. The new method to quantify hyporheic flows rests on injections of a solution of dye and water. The method yielded accurate flow lines, and reasonable estimates of the hyporheic flow velocities. The present series of experiments was carried out in a 11 m long, 0.39 m wide, and 0.41 m deep tilting flume. The gravel had a mean particle size of 7.7 mm. Different free surface flows were imposed by changing the flume slope and flow depth. Measured hyporheic flows were turbulent. Smaller free surface flow depths resulted in stronger hyporheic flows (higher velocities, and deeper dye penetration into the sediment). A significant finding is that different free surface flows (different velocities, Reynolds number, etc.) produce similar hyporheic flows as long as the downstream hydraulic gradients are similar. This suggests, that for a specified bar geometry, the characteristics of the hyporheic flows depend on the downstream hydraulic gradients, and not or only minimally on the internal dynamics of the free surface flow.

Nonlinear soil-structure interaction for buried pressure pipes under differential ground motion

Pipelines extend thousands of kilometers across wide geographic areas as a network to provide essential services for modern life. It is inevitable that pipelines must pass through unfavorable ground conditions, which are susceptible to natural disasters. This thesis investigates the behaviour of buried pressure pipelines experiencing ground distortions induced by normal faulting. A recent large database of physical modelling observations on buried pipes of different stiffness relative to the surrounding soil subjected to normal faults provided a unique opportunity to calibrate numerical tools. Three-dimensional finite element models were developed to enable the complex soil-structure interaction phenomena to be further understood, especially on the subjects of gap formation beneath the pipe and the trench effect associated with the interaction between backfill and native soils. Benchmarked numerical tools were then used to perform parametric analysis regarding project geometry, backfill material, relative pipe-soil stiffness and pipe diameter. Seismic loading produces a soil displacement profile that can be expressed by isoil, the distance between the peak curvature and the point of contraflexure. A simplified design framework based on this length scale (i.e., the Kappa method) was developed, which features estimates of longitudinal bending moments of buried pipes using a characteristic length, ipipe, the distance from peak to zero curvature. Recent studies indicated that empirical soil springs that were calibrated against rigid pipes are not suitable for analyzing flexible pipes, since they lead to excessive conservatism (for design). A large-scale split-box normal fault simulator was therefore assembled to produce experimental data for flexible PVC pipe responses to a normal fault. Digital image correlation (DIC) was employed to analyze the soil displacement field, and both optical fibres and conventional strain gauges were used to measure pipe strains. A refinement to the Kappa method was introduced to enable the calculation of axial strains as a function of pipe elongation induced by flexure and an approximation of the longitudinal ground deformations. A closed-form Winkler solution of flexural response was also derived to account for the distributed normal fault pattern. Finally, these two analytical solutions were evaluated against the pipe responses observed in the large-scale laboratory tests.

Numerical Modelling of Eddy Current Probes for CANDU® Fuel Channel Inspection

Multi-frequency Eddy Current (EC) inspection with a transmit-receive probe (two horizontally offset coils) is used to monitor the Pressure Tube (PT) to Calandria Tube (CT) gap of CANDU® fuel channels. Accurate gap measurements are crucial to ensure fitness of service; however, variations in probe liftoff, PT electrical resistivity, and PT wall thickness can generate systematic measurement errors. Validated mathematical models of the EC probe are very useful for data interpretation, and may improve the gap measurement under inspection conditions where these parameters vary. As a first step, exact solutions for the electromagnetic response of a transmit-receive coil pair situated above two parallel plates separated by an air gap were developed. This model was validated against experimental data with flat-plate samples. Finite element method models revealed that this geometrical approximation could not accurately match experimental data with real tubes, so analytical solutions for the probe in a double-walled pipe (the CANDU® fuel channel geometry) were generated using the Second-Order Vector Potential (SOVP) formalism. All electromagnetic coupling coefficients arising from the probe, and the layered conductors were determined and substituted into Kirchhoff’s circuit equations for the calculation of the pickup coil signal. The flat-plate model was used as a basis for an Inverse Algorithm (IA) to simultaneously extract the relevant experimental parameters from EC data. The IA was validated over a large range of second layer plate resistivities (1.7 to 174 µΩ∙cm), plate wall thickness (~1 to 4.9 mm), probe liftoff (~2 mm to 8 mm), and plate-to plate gap (~0 mm to 13 mm). The IA achieved a relative error of less than 6% for the extracted FP resistivity and an accuracy of ±0.1 mm for the LO measurement. The IA was able to achieve a plate gap measurement with an accuracy of less than ±0.7 mm error over a ~2.4 mm to 7.5 mm probe liftoff and ±0.3 mm at nominal liftoff (2.42±0.05 mm), providing confidence in the general validity of the algorithm. This demonstrates the potential of using an analytical model to extract variable parameters that may affect the gap measurement accuracy.

Molecular characterization of extended-spectrum cephalosporin-resistance in Escherichia coli in pigs on-farm and from clinical cases throughout Quebec, Canada during 16 years

Le développement de la multirésistance chez Escherichia coli est un problème important en médecine animale et humaine. En outre, l’émergence et la diffusion des déterminants de résistance aux céphalosporines à larges spectres de troisième génération (ESCs) parmi les isolats, incluant des céphalosporines essentielles en médecine humaine (ex. ceftriaxone et ceftiofur), est un problème majeur de santé publique. Cette thèse visait trois objectifs. D’abord étudier la dynamique de la résistance aux antimicrobiens (AMR) ainsi que la virulence et les profils génétiques de la AMR des E. coli isolées de porcs recevant une nourriture post-sevrage supplémentée avec de la chlortétracycline et de la pénicilline G, et, accessoirement, évaluer les effets d'additifs alimentaires sur cette dynamique en prenant pour exemple d'étude un minéral argileux, la clinoptilolite, étant donné son possible lien avec le gène blaCMY-2 qui confère la résistance au ceftiofur. L'objectif suivant était d'investiguer les mécanismes menant à une augmentation de la prévalence du gène blaCMY-2 chez les porcs qui reçoivent de la nourriture médicamentée et qui n'ont pas été exposés au ceftiofur Ici encore,nous avons examiné les effets d’un supplément alimentaire avec un minéral argileux sur ce phénomène. Enfin, notre dernier objectif était d’étudier, dans le temps, les génotypes des isolats cliniques d'E. coli résistant au ceftiofur, isolés de porcs malades au Québec à partir du moment où la résistance au ceftiofur a été rapportée, soit de 1997 jusqu'à 2012. Dans l'étude initiale, la prévalence de la résistance à 10 agents antimicrobiens, incluant le ceftiofur, s’accroît avec le temps chez les E.coli isolées de porcelets sevrés. Une augmentation tardive de la fréquence du gène blaCMY-2, encodant pour la résistance au ceftiofur, et la présence des gènes de virulence iucD et tsh a été observée chez les isolats. La nourriture supplémentée avec de la clinoptilolite a été associée à une augmentation rapide mais, par la suite, à une diminution de la fréquence des gènes blaCMY-2 dans les isolats. En parallèle, une augmentation tardive dans la fréquence des gènes blaCMY-2 et des gènes de virulence iucD et tsh a été observée dans les isolats des porcs contrôles, étant significativement plus élevé que dans les porcs ayant reçu l'additif au jour 28. La diversité, au sein des E. coli positives pour blaCMY-2 , a été observée au regard des profils AMR. Certaines lignées clonales d'E.coli sont devenues prédominantes avec le temps. La lignée clonale du phylotype A prédominait dans le groupe supplémenté, alors que les lignées clonales du phylotype B1, qui possèdent souvent le gène de virulence iucD associé aux ExPEC, prédominaient dans le groupe contrôle. Les plasmides d'incompatibilité (Inc) des groupes, I1, A/C, et ColE, porteurs de blaCMY-2, ont été observés dans les transformants. Parmi les souches cliniques d'E.coli ESC-résistantes, isolées de porcs malades au Québec de 1997 à 2012, blaCMY-2 était le gène codant pour une β-lactamase le plus fréquemment détecté; suivi par blaTEM et blaCTX-M,. De plus, les analyses clonales montrent une grande diversité génétique. Par contre, des isolats d'E. coli avec des profils PFGE identiques ont été retrouvés dans de multiples fermes la même année mais aussi dans des années différentes. La résistance à la gentamicine, kanamycine, chloramphenicol, et la fréquence de blaTEM et de IncA/C diminuent significativement au cour de la période étudiée, alors que la fréquence de IncI1 et de la multirésistance à sept catégories d'agents antimicrobiens augmente significativement avec le temps. L'émergence d'isolats d'E. coli positifs pour blaCTX-M, une β-lactamase à large spectre et produisant des ESBL, a été observée en 2011 et 2012 à partir de lignées clonales distinctes et chez de nombreuses fermes. Ces résultats, mis ensemble, apportent des précisions sur la dissémination de la résistance au ceftiofur dans les E. coli isolées de porcs. Au sein des échantillons prélevés chez les porcs sevrés recevant l'alimentation médicamentée sur une ferme, et pour laquelle une augmentation de la résistance au ceftiofur a été observée, les données révèlent que les souches d'E. coli positives pour blaCMY-2 et résistantes aux ESCs appartenaient à plusieurs lignées clonales différentes arborant divers profils AMR. Le gène blaCMY-2 se répand à la fois horizontalement et clonalement chez ces E. coli. L'ajout de clinoptilotite à la nourriture et le temps après le sevrage influencent la clonalité et la prévalence du gène blaCMY-2 dans les E. coli. Durant les 16 années d'étude, plusieurs lignées clonales différentes ont été observées parmi les souches d'E. coli résistantes au ceftiofur isolées de porc malades de fermes québécoises, bien qu’aucune lignée n'était persistante ou prédominante pendant l'étude. Les résultats suggèrent aussi que le gène blaCMY-2 s'est répandu à la fois horizontalement et clonalement au sein des fermes. De plus, blaCMY-2 est le gène majeur des β-lactamases chez ces isolats. À partir de 2011, nous rapportons l'émergence du gène blaCTX-M dans des lignées génétiques distinctes.

Continuous Delivery : Utmaningar ett förvaltningsuppdrag kan stå inför vid en övergång till Continuous Delivery

Continuous delivery (CD) is a software engineering approach where the focus lays on creating a short delivery cycle by automating parts of the deployment pipeline which includes build, deploy-, test and release process. CD is based on that during development should be possible to always automatically generate a release based on the source code in its current state. One of CD's many advantages is that through continuous releases it allows you to get a quick feedback loop leading to faster and more efficient implementation of new functions, at the same time fixing errors. Although CD has many advantages, there are also several challenges a maintenance management project must manage in the transition to CD. These challenges may differ depending on the maturity level for a maintenance management project and what strengths and weaknesses the project has. Our research question was: "What challenges can a maintenance management project face in transition to Continuous delivery?" The purpose of this study is to describe Continuous delivery and the challenges a maintenance management project may face during a transition to Continuous delivery. A descriptive case study has been carried out with the data collection methods of interviews and documents. A situation analysis was created based on the collected data in a shape of a process model that represent the maintenance management projects release process. The processmodel was used as the basis of SWOT analysis and analysis by Rehn et al's Maturity Model. From these analyzes we found challenges of a maintenance management project may face in the transition to CD. The challenges are about customers and the management's attitude towards a transition to CD. But the biggest challenge is about automation of the deployment pipeline steps.