Influência de lâminas de água e adubação mineral na nutrição e produtividade de arroz de terras altas

Para recomendações de adubação mais racionais, é fundamental o conhecimento das exigências nutricionais da cultura do arroz, nos diversos sistemas de cultivo. Objetivando estudar a influência de lâminas de água na nutrição e exportação de nutrientes pelo arroz de terras altas, cultivar IAC 201, sob dois níveis de adubação, foram instalados experimentos em um Latossolo Vermelho distrófico, em Selvíria (MS), nos anos agrícolas de 1994/95 e 1995/96. O delineamento foi de blocos casualizados, com quatro repetições. Os tratamentos constituíram-se da precipitação natural e de quatro lâminas de água fornecidas por aspersão. A lâmina L2 foi baseada no coeficiente de cultura (Kc) do arroz de terras altas. As lâminas L1 e L3 foram definidas como 0,5 e 1,5 vez os Kcs utilizados em L2, respectivamente, e na lâmina L4 foi adotado Kc = 1,95 durante todo o ciclo da cultura. em 1995/96, foram utilizados os mesmos tratamentos em parcelas subdivididas, sendo as subparcelas constituídas por duas doses de adubação (AD1 - 12 kg ha-1 de N, 90 de P2O5 e 30 de K2O, e AD2 - 24 kg ha-1 de N, 180 de P2O5 e 60 de K2O). A menor disponibilidade de água durante a fase vegetativa e reprodutiva proporcionou redução na produção de matéria seca, nos teores e quantidades de nutrientes acumuladas na parte aérea. O sistema irrigado por aspersão, independentemente da lâmina utilizada, proporcionou maior produtividade de grãos e exportação de nutrientes. em solos com teores adequados de nutrientes para o sistema de sequeiro, não há resposta ao aumento da adubação mineral pelo arroz no sistema irrigado por aspersão, apesar da maior extração de nutrientes.

Extração e exportação de nutrientes em cultivares de batata: II - micronutrientes

Cultivares de batata mais produtivas possivelmente exigem maior quantidade de micronutrientes, porém no Brasil há carência de informações sobre extração e exportação de micronutrientes pelas principais cultivares de batata utilizadas. O objetivo deste trabalho foi avaliar a produtividade de tubérculos, a extração e a exportação de micronutrientes nas cultivares de batata Ágata, Asterix, Atlantic, Markies e Mondial. O experimento foi conduzido durante a safra de inverno, em um Latossolo Vermelho, no município de Itaí (SP). As parcelas foram constituídas pelas cinco cultivares, e as subparcelas, por épocas de coletas, realizadas no momento do plantio e a cada sete dias após a emergência. As cultivares Mondial e Asterix, mais produtivas, apresentaram maior extração de micronutrientes, com quantidades médias por hectare de 71 g de B, 122 g de Cu, 2.228 g de Fe, 618 g de Mn e 405 g de Zn. As menores quantidades extraídas foram observadas na cultivar Atlantic, com valores de 50, 81, 1.960, 544 e 270 g ha-1 de B, Cu, Fe, Mn e Zn, respectivamente. A fase de maior demanda por B ocorre logo após o início da formação de tubérculos, aos 34 DAP, enquanto a maior demanda por Fe e Mn inicia-se a partir dos 42 DAP e vai até 63 DAP. O Cu e o Zn são absorvidos em maiores proporções a partir dos 64 DAP até o final do ciclo. A quantidade de B, Cu, Mn e Zn exportada foi dependente da cultivar, com valores por hectare variando de 48 a 22 g de B, 79 a 16 g de Cu, 65 a 37 g de Mn e 167 a 83 g de Zn. A quantidade de Fe exportada não variou entre as cultivares, sendo, em média, de 243 g ha-1. A quantidade de micronutrientes extraída e exportada pela batateira variou com as cultivares utilizadas, indicando necessidade de manejo diferencial da adubação.

Método rápido de extração de DNA de bactérias

Desenvolveu-se um método rápido para extração de DNA de bactérias, que ao contrário de outros métodos, não requer o uso de enzimas, como lisozima e proteinase K, previamente, utilizado-se o carbonato de silício (carborundum) como agente físico para efetuar a quebrar da parede celular da bactéria. Com este método conseguiu-se extrair DNA bacteriano num menor tempo, além de mais rápido, ele mostrou-se mais simples e econômico, quando comparado aos métodos convencionais. O DNA obtido pode ser utilizado para diversas finalidades relacionadas ao DNA de bactérias, obtendo-se uma quantidade razoável de DNA, que varia de 725 µg/mL a 1170 µg/mL por cada 0,1 g de célula bacteriana, com ótima qualidade.

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Liberação de cálcio e magnésio por cápsulas porosas de porcelana usadas na extração de solução do solo

O uso de cápsulas porosas para extração de solução do solo é interessante por ser um ensaio não-destrutivo. Entretanto, persistem dúvidas sobre a liberação de íons da própria cápsula, que podem contaminar a solução extraída. Foram realizados testes na Faculdade de Ciências Agronômicas/UNESP, Botucatu (SP), com o objetivo de verificar a liberação de Ca e de Mg por cápsulas porosas de porcelana. No primeiro, foram empregados quatro tratamentos: T1 - lavagem das cápsulas com água destilada, forçando sua passagem pelas cápsulas, utilizando uma bomba a vácuo; T2 - lavagem das cápsulas com HCl 0,1 mol L-1, forçando sua passagem pelas cápsulas, utilizando uma bomba a vácuo; T3 - lavagem das cápsulas com água destilada, sem vácuo, e T4 - lavagem das cápsulas com HCl 0,1 mol L-1, sem vácuo, em um tempo de imersão de 24 h (para T3 e T4). No segundo teste, as cápsulas tratadas com HCl 0,1 mol L-1 no primeiro teste foram lavadas com água destilada novamente e deixadas de molho em água destilada e deionizada durante 45 min. Após estes procedimentos, as cápsulas foram imersas em água destilada, tomando-se alícotas desta solução para determinação de pH e dos teores de Ca e Mg após contato com as cápsulas por 0; 0,5; 1,0; 2,0; 4,0 e 24 h. Cada tratamento teve quatro repetições. Não se observou liberação significativa de Ca e Mg das cápsulas porosas para a solução, quando foram preparadas utilizando-se da passagem de HCl 0,1 mol L-1 a vácuo e água destilada, e deixadas, a seguir, em água destilada e deionizada durante 4 h.

Extração e exportação de nutrientes em cultivares de batata: I - macronutrientes

A determinação das quantidades de nutrientes absorvidas durante o ciclo de desenvolvimento é de suma importância para estabelecer as épocas em que esses elementos são mais exigidos e as quantidades corretas que devem ser disponibilizadas à cultura da batata. No entanto, quase não existem essas informações para as principais cultivares utilizadas no Brasil. O objetivo deste trabalho foi avaliar a extração e a exportação de macronutrientes pelas cultivares de batata Ágata, Asterix, Atlantic, Markies e Mondial. O experimento foi conduzido durante a safra de inverno, em um Latossolo Vermelho, no município de Itaí (SP). As parcelas foram constituídas pelas cinco cultivares, e as subparcelas, por épocas de coletas, realizadas no momento do plantio e a cada sete dias após a emergência. As cultivares Mondial e Asterix, mais produtivas, apresentaram maior extração de macronutrientes, com quantidades médias por hectare de 116 kg de N, 18 kg de P, 243 kg de K, 50 kg de Ca e 13 kg de Mg, enquanto as cultivares Ágata, Atlantic e Markies extraíram menor quantidade, com valores médios de 92, 14, 178, 35 e 9 kg ha-1, respectivamente. A maior demanda por macronutrientes pelas cultivares estudadas ocorreu na fase inicial de enchimento dos tubérculos (42 a 70 DAP). A exportação de macronutrientes não esteve diretamente relacionada com a produtividade de tubérculos, já que a cultivar mais produtiva (Mondial) não foi a que exportou a maior quantidade de macronutrientes. A cultivar Asterix exportou maior quantidade de N, P, K e Mg, com valores de 88, 15, 220 e 8 kg ha-1, respectivamente, enquanto a menor exportação foi observada na cultivar Atlantic, com 48 kg ha-1 de N, 10 kg ha-1 de P, 143 kg ha-1 de K e 5 kg ha-1 de Mg. A variação entre as cultivares na extração, especialmente de K e N, indica necessidade de manejo diferencial da adubação.

Extração do óleo essencial de Cymbopogom winterianus J. com CO2 pressurizado

The extraction with pressurized fluids has become an attractive process for the extraction of essential oils, mainly due the specific characteristics of the fluids near the critical region. This work presents results of the extraction process of the essential oil of Cymbopogon winterianus J. with CO2 under high pressures. The effect of the following variables was evaluated: solvent flow rate (from 0.37 to 1.5 g CO2/min), pressure (66.7 and 75 bar) and temperature (8, 10, 15, 20 and 25 ºC) on the extraction kinetics and the total yield of the process, as well as in the solubility and composition of the C. winterianus essential oil. The experimental apparatus consisted of an extractor of fixed bed and the dynamic method was adopted for the calculation of the oil solubility. Extractions were also accomplished by conventional techniques (steam and organic solvent extraction). The determination and identification of extract composition were done by gas chromatography coupled with a mass spectrometer (GC-MS). The extract composition varied in function of the studied operational conditions and also related to the used extraction method. The main components obtained in the CO2 extraction were elemol, geraniol, citronellol and citronellal. For the steam extraction were the citronellal, citronellol and geraniol and for the organic solvent extraction were the azulene and the hexadecane. The most yield values (2.76%) and oil solubility (2.49x10-2 g oil/ g CO2) were obtained through the CO2 extraction in the operational conditions of T = 10°C, P = 66.7 bar and solvent flow rate 0.85 g CO2/min

Tratamento de materiais contaminados com bifenilas policloradas (PCBS) via extração convencional e fluído supercrítico

The decontamination of the materials has been subject of some studies. One of the factors that it increases the pollution is the lack of responsibility in the discarding of toxic trash, as for example the presence of PCB (Polychlorinated Biphenyls) in the environment. In the Brazilian regulations, the material contaminated with PCB in concentrations higher than 50 ppm must be stored in special places or destroyed, usually by incineration in plasma furnace with dual steps. Due to high cost of the procedure, new methodologies of PCBs removal has been studied. The objective of this study was to develop an experimental methodology and analytical methodology for quantification of removal of PCBs through out the processes of extractions using supercritical fluid and Soxhlet method, also technical efficiency of the two processes of extraction, in the treatment of contaminated materials with PCBs. The materials studied were soils and wood, both were simulated contamination with concentration of 6.000, 33.000 and 60.000 mg of PCB/ kg of materials. Soxhlet extractions were performed using 100 ml of hexane, and temperature of 180 ºC. Extractions by fluid supercritical were performed at conditions of 200 bar, 70°C, and supercritical CO2 flow-rate of 3 g/min for 1-3 hours. The extracts obtained were quantified using Gas chromatography-mass spectrometry (GC/MS). The conventional extractions were made according to factorial experimental planning technique 22, with aim of study the influence of two variables of process extraction for the Soxhlet method: contaminant concentration and extraction time for obtain a maximum removal of PCB in the materials. The extractions for Soxhlet method were efficient for extraction of PCBs in soil and wood in both solvent studied (hexane and ethanol). In the experimental extraction in soils, the better efficient of removal of PCBs using ethanol as solvent was 81.3% than 95% for the extraction using hexane as solvent, for equal time of extraction. The results of the extraction with wood showed statistically it that there is not difference between the extractions in both solvent studied. The supercritical fluid extraction in the conditions studied showed better efficiency in the extraction of PCBs in the wood matrix than in soil, for two hours extractions the obtain percentual of 43.9 ± 0.5 % for the total of PCBs extracted in the soils against 95.1 ± 0,5% for the total of PCBs extracted in the wood. The results demonstrated that the extractions were satisfactory for both technical studied

Extração e exportação de nutrientes pelo híbrido de mamona Savana: I – macronutrientes

Low height castor bean hybrids and highly productive possibly need larger quantity of macronutients during its development cycle. However, in Brazil there is little information on extraction and exportation of macronutrients by low height castor bean hybrids, as on season as out-of-season growing. This study aimed to evaluate the nutrients extraction and exportation by Savana hybrid castor bean on season and out-of-season growing. The experiments were conducted during the season of 2005/2006 and out-of-season of 2006 in an Oxisol. The experimental design was a randomized block with four replications. The plots were consisted by harvest times of plants, which were composed by six plant rows to 5 m, spaced 0.45 m between rows. Samples were collected at 17, 31, 45, 59, 73, 97 and 120 days after emergence (DAE) during the season and at 17, 31, 45, 59, 80; 100 and 120 DAE in the out-of-season. The nutrients accumulation by Savana hybrid was small until the flowering (30 DAE), but intensified after this period. The period of greatest nutrient absorption occurred at 65 and 90 DAE for N, 70 and 80 DAE for P, 60 DAE for K and Mg, 55 and 60 DAE for Ca and S. The amounts absorbed per hectare by hybrid Savana ranged 155 to 31 kg of N, 17 to 3 kg of P, 71 to 13 kg of K, 56 to 12 kg of Ca, 28 to 4 kg of Mg and 29,5 to 7 kg of S in season and out-of-season, respectively. The yield was higher in growing season, but the nutrients extraction and exportation per ton of grain were similar among the seasons. Among 40% and 50% of N and S and most part of Mg, K and Ca accumulated in the plants returned to soil with crop residues, but less than 35% of P remained in the residues.

Extração e exportação de nutrientes pelo híbrido de mamona Savana: II – micronutrientes

Information about micronutrients extraction and exportation by castor bean hybrids of short stature, and the periods of highest demand for each micronutrient, are most importance for correct management to fertilization. This study aimed to evaluate the micronutrients extraction and exportation by Savana hybrid castor bean, on season and out-of-season growing. The experiments were conducted during season of 2005/2006 and out-of-season of 2006 in an Oxisol. The experimental design was a randomized block with four replications. The plots were consisted by harvest times of plants, which were carried out at 17, 31, 45, 59, 73, 97 and 120 days after emergence (DAE) during the season and at 17, 31, 45, 59, 80; 100 and 120 DAE in the out-of-season. In both seasons the order of micronutrients extraction by hybrid Savanna is: Fe> Mn> Zn> B> Cu> Mo, but with larger amounts of season cultivation. The time of greatest Zn and Mo absorption during the season and the Fe in out-of-season occurs at 80 DAE, although the other micronutrients are absorbed at higher rates between 50 and 65 DAE. In season the yield, nutrients extraction and exportation from soil are higher than out-of-season, but the nutrients extraction and exportation per ton show less variation between growing seasons. Fifty percent of zinc and 60% of Cu uptaken, on average, in out-of-season is exported with grains, but for the other micronutrients the proportion exported with grains is less than 40%.

Extração e pirólise do óleo de girassol (Helianthus annus l.) visando a produção de biocombustíveis

Nowadays, the growing environmental worry leads research the focus the application of alternative materials from renewable resources on the industrial process. The most common vegetable oil extractant using around the world is the hexane, a petroleum derived, toxic and flammable. Based on this fact, the goal of this work was to test vegetable oil extractions from sunflower seeds cultivated on the Rio Grande do Norte State using two extraction process, the mechanical expelling and solvent extraction, this one using hexane and ethanol as a alternative solvent. The solvent extractions were carried out in the Soxhlet extractor in three different extraction times (4, 6, and 8 hours). The effect of solvent and extraction time was evaluated. The mechanical extraction was carried out in a expeller and the sunflower oil obtained was characterized by its physical-chemical properties and compared with sunflower refinery oil. Furthermore this work also explored the pyrolysis reaction carried out by thermogravimetry measurement as alternative route to obtain biofuel. For this purpose the oil samples were heated to ambient temperature until 900°C in heating rate of 5, 10, 20ºC min-1 with the objective evaluated the kinetics parameters such activation energy and isoconversion. The TG/DTG curves show the thermal profile decomposition of triglycerides. The curves also showed that antioxidant presents on the refinery oil not influence on the thermal stability of sunflower oil. The total yield of the extraction s process with hexane and ethanol solvent were compared, and the results indicated that the extraction with ethanol were more efficient. The pyrolysis reaction results indicated that the use of unpurified oil required less energy to obtain the bio-oil

Extração de ferro da cera de carnaúba utilizando sistemas microemulsionados

The constant search for biodegradable materials for applications in several fields shows that carnauba wax can be a viable alternative in the manufacturing of biolubricants. Carnauba wax is the unique among the natural waxes to have a combination of properties of great importance. In previous studies it was verified the presence of metals in wax composition that can harm the oxidative stability of lubricants. Considering these factors, it was decided to develop a research to evaluate iron removal from carnauba wax, using microemulsion systems (Me) and perform the optimization of parameters, such as: extraction pH, temperature, extraction time, among others. Iron concentration was determined by atomic absorption and, to perform this analysis, sample digestion in microwave oven was used, showing that this process was very efficient. It was performed some analysis in order to characterize the wax sample, such as: attenuated total reflectance infrared spectroscopy (ATR-IR), thermogravimetry (TG), differential scanning calorimetry (DSC), energy dispersive X-ray fluorescence (EDXRF), scanning electron microscopy (SEM) and melting point (FP). The microemulsion systems were composed by: coconut oil as surfactant, n-butanol as cosurfactant, kerosene and/or heptanes as oil phase, distilled water as water phase. The pH chosen for this study was 4.5 and the metal extraction was performed in finite experiments. To evaluate Me extraction it was performed a factorial design for systems with heptane and kerosene as oil phase, also investigating the influence of temperature time and wax/Me ratio, that showed an statistically significant answer for iron extraction at 95% confidence level. The best result was obtained at 60°C, 10 hours contact time and 1: 10 wax/Me ratio, in both systems with kerosene and heptanes as oil phase. The best extraction occurred with kerosene as oil phase, with 54% iron removal

Extração do corante reactive blue 19 utilizando tensoativo não iônico

The generation of effluent from the finishing process in textile industry is a serious environmental problem and turned into an object of study in several scientific papers. Contamination with dyes and the presences of substances that are toxic to the environment characterize this difficult treatment effluent. Several processes have already been evaluated to remove and even degrade such pollutants are examples: coagulation-flocculation, biological treatment and advanced oxidative processes, but not yet sufficient to enable the recovery of dye or at least of the recovery agent. An alternative to this problem is the cloud point extraction that involves the application of nonionic surfactants at temperatures above the cloud point, making the water a weak solvent to the surfactant, providing the agglomeration of those molecules around the dyes molecules by affinity with the organic phase. After that, the formation of two phases occurred: the diluted one, poor in dye and surfactant, and the other one, coacervate, with higher concentrations of dye and surfactants than the other one. The later use of the coacervate as a dye and surfactant recycle shows the technical and economic viability of this process. In this paper, the cloud point extraction is used to remove the dye Reactive Blue from the water, using nonionic surfactant nonyl phenol with 9,5 etoxilations. The aim is to solubilize the dye molecules in surfactant, varying the concentration and temperature to study its effects. Evaluating the dye concentration in dilute phase after extraction, it is possible to analyze thermodynamic variables, build Langmuir isotherms, determine the behavior of the coacervate volume for a surfactant concentration and temperature, the distribution coefficient and the dye removal efficiency. The concentration of surfactant proved itself to be crucial to the success of the treatment. The results of removal efficiency reached values of 91,38%, 90,69%, 89,58%, 87,22% and 84,18% to temperatures of 65,0, 67,5, 70,0, 72,5 and 75,0°C, respectively, showing that the cloud point extraction is an efficient alternative for the treatment of wastewater containing Reactive Blue

Estudo dos parâmetros de extração de fenol de efluentes aquosos por um tensoativo não iônico

Environmental sustainability has become one of the topics of greatest interest in industry, mainly due to effluent generation. Phenols are found in many industries effluents, these industries might be refineries, coal processing, pharmaceutical, plastics, paints and paper and pulp industries. Because phenolic compounds are toxic to humans and aquatic organisms, Federal Resolution CONAMA No. 430 of 13.05.2011 limits the maximum content of phenols, in 0.5 mg.L-1, for release in freshwater bodies. In the effluents treatment, the liquid-liquid extraction process is the most economical for the phenol recovery, because consumes little energy, but in most cases implements an organic solvent, and the use of it can cause some environmental problems due to the high toxicity of this compound. Because of this, exists a need for new methodologies, which aims to replace these solvents for biodegradable ones. Some literature studies demonstrate the feasibility of phenolic compounds removing from aqueous effluents, by biodegradable solvents. In this extraction kind called "Cloud Point Extraction" is used a nonionic surfactant as extracting agent of phenolic compounds. In order to optimize the phenol extraction process, this paper studies the mathematical modeling and optimization of extraction parameters and investigates the effect of the independent variables in the process. A 32 full factorial design has been done with operating temperature and surfactant concentration as independent variables and, parameters extraction: Volumetric fraction of coacervate phase, surfactant and residual concentration of phenol in dilute phase after separation phase and phenol extraction efficiency, as dependent variables. To achieve the objectives presented before, the work was carried out in five steps: (i) selection of some literature data, (ii) use of Box-Behnken model to find out mathematical models that describes the process of phenol extraction, (iii) Data analysis were performed using STATISTICA 7.0 and the analysis of variance was used to assess the model significance and prediction (iv) models optimization using the response surface method (v) Mathematical models validation using additional measures, from samples different from the ones used to construct the model. The results showed that the mathematical models found are able to calculate the effect of the surfactant concentration and the operating temperature in each extraction parameter studied, respecting the boundaries used. The models optimization allowed the achievement of consistent and applicable results in a simple and quick way leading to high efficiency in process operation.

Extração enzimática de óleo e produção in situ de biodiesel a partir da Moringa oleífera Lam

With the growth and development of modern society, arises the need to search for new raw materials and new technologies which present the "clean" characteristic, and do not harm the environment, but can join the energy needs of industry and transportation. The Moringa oleifera Lam, plant originating from India, and currently present in the Brazilian Northeast, presents itself as a multi-purpose plant, can be used as a coagulant in water treatment, as a natural remedy and as a feedstock for biodiesel production. In this work, Moringa has been used as a raw material for studies on the extraction and subsequently in the synthesis of biodiesel. Studies have been conducted on various techniques of Moringa oil extraction (solvents, mechanical pressing and enzymatic), being specially developed an experimental design for the aqueous extraction with the aid of the enzyme Neutrase© 0.8 L, with the aim of analyzing the influence variable pH (5.5-7.5), temperature (45-55°C), time (16-24 hours) and amount of catalyst (2-5%) on the extraction yield. In relation to study of the synthesis of biodiesel was initially carried out a conventional transesterification (50°C, KOH as a catalyst, methanol and 60 minutes reaction). Next, a study was conducted using the technique of in situ transesterification by using an experimental design variables as temperature (30-60°C), catalyst amount (2-5%), and molar ratio oil / ethanol (1:420-1:600). The extraction technique that achieved the highest extraction yield (35%) was the one that used hexane as a solvent. The extraction using 32% ethanol obtained by mechanical pressing and extraction reached 25% yield. For the enzymatic extraction, the experimental design indicated that the extraction yield was most affected by the effect of the combination of temperature and time. The maximum yield obtained in this extraction was 16%. After the step of obtaining the oil was accomplished the synthesis of biodiesel by the conventional method and the in situ technique. The method of conventional transesterification was obtained a content of 100% and esters by in situ technique was also obtained in 100% in the experimental point 7, with a molar ratio oil / alcohol 1:420, Temperature 60°C in 5% weight KOH with the reaction time of 1.5 h. By the experimental design, it was found that the variable that most influenced the ester content was late the percentage of catalyst. By physico-chemical analysis it was observed that the biodiesel produced by the in situ method fell within the rules of the ANP, therefore this technique feasible, because does not require the preliminary stage of oil extraction and achieves high levels of esters