Avaliação experimental dos níveis de qualidade do ar interior em quartos de dormir: um caso de estudo

Dissertação para obtenção do grau de Mestre em Engenharia Civil – Reabilitação de Edifícios

Experimental Study And Evaluation Of Paper-Based Inkjet Electrodes For ECG Signal Acquisition

Applications involving biosignals, such as Electrocardiography (ECG), are becoming more pervasive with the extension towards non-intrusive scenarios helping targeting ambulatory healthcare monitoring, emotion assessment, among many others. In this study we introduce a new type of silver/silver chloride (Ag/AgCl) electrodes based on a paper substrate and produced using an inkjet printing technique. This type of electrodes can increase the potential applications of biosignal acquisition technologies for everyday life use, given that there are several advantages, such as cost reduction and easier recycling, resultant from the approach explored in our work. We performed a comparison study to assess the quality of this new electrode type, in which ECG data was collected with three types of Ag/AgCl electrodes: i) gelled; ii) dry iii) paper-based inkjet printed. We also compared the performance of each electrode when acquired using a professional-grade gold standard device, and a low cost platform. Experimental results showed that data acquired using our proposed inkjet printed electrode is highly correlated with data obtained through conventional electrodes. Moreover, the electrodes are robust to high-end and low-end data acquisition devices. Copyright © 2014 SCITEPRESS - Science and Technology Publications. All rights reserved.

Numerical and experimental analyses of biocomposites reinforced with natural fibres

n the last decades the biocomposites have been widely used in the construction, automobile and aerospace industries. Not only the interface transition zone (ITZ) but also the heterogeneity of natural fibres affects the mechanical behaviour of these composites. This work focuses on the numerical and experimental analyses of a polymeric composite fabricated with epoxy resin and unidirectional sisal and banana fibres. A three-dimensional model was set to analyze the composites using the elastic properties of the individual phases. In addition, a two-dimensional model was set taking into account the effective composite properties obtained by micromechanical models. A tensile testing was performed to validate the numerical analyses and evaluating the interface condition of the constitutive phases.

Numerical and experimental study of tensile strength of single and double-strap repairs

Adhesive bonding as a joining or repair method has a wide application in many industries. Repairs with bonded patches are often carried out to re-establish the stiffness at critical regions or spots of corrosion and/or fatigue cracks. Single and double-strap repairs (SS and DS, respectively) are a viable option for repairing. For the SS repairs, a patch is adhesively-bonded on one of the structure faces. SS repairs are easy to execute, but the load eccentricity leads to peel peak stresses at the overlap edges. DS repairs involve the use of two patches, one on each face of the structure. These are more efficient than SS repairs, due to the doubling of the bonding area and suppression of the transverse deflection of the adherends. Shear stresses also become more uniform as a result of smaller differential straining. The experimental and Finite Element (FE) study presented here for strength prediction and design optimization of bonded repairs includes SS and DS solutions with different values of overlap length (LO). The examined values of LO include 10, 20 and 30 mm. The failure strengths of the SS and DS repairs were compared with FE results by using the Abaqus® FE software. A Cohesive Zone Model (CZM) with a triangular shape in pure tensile and shear modes, including the mixed-mode possibility for crack growth, was used to simulate fracture of the adhesive layer. A good agreement was found between the experiments and the FE simulations on the failure modes, elastic stiffness and strength of the repairs, showing the effectiveness and applicability of the proposed FE technique in predicting strength of bonded repairs. Furthermore, some optimization principles were proposed to repair structures with adhesively-bonded patches that will allow repair designers to effectively design bonded repairs.

Experimental backlash study in mechanical manipulators

The behavior of mechanical manipulators with backlash is analyzed. In order to acquire and study the signals an experimental setup is implemented. The signal processing capabilities of the wavelets are used for de-noising the experimental signals and the energy of the obtained components is analyzed. To evaluate the backlash effect upon the robotic system, it is proposed an index based on the pseudo phase plane representation. Several tests are developed that demonstrate the coherence of the results.

Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining

An experimental and Finite Element study was performed on the bending behaviour of wood beams of the Pinus Pinaster species repaired with adhesively-bonded carbon–epoxy patches, after sustaining damage by cross-grain failure. This damage is characterized by crack growth at a small angle to the beams longitudinal axis, due to misalignment between the wood fibres and the beam axis. Cross-grain failure can occur in large-scale in a wood member when trees that have grown spirally or with a pronounced taper are cut for lumber. Three patch lengths were tested. The simulations include the possibility of cohesive fracture of the adhesive layer, failure within the wood beam in two propagation planes and patch interlaminar failure, by the use of cohesive zone modelling. The respective cohesive properties were estimated either by an inverse method or from the literature. The comparison with the tests allowed the validation of the proposed methodology, opening a good perspective for the reduction of costs in the design stages of these repairs due to extensive experimentation.

Experimental measuring procedure for the friction torque in rolling bearings

The reduction of the power loss generated in mechanical transmissions and the use of low friction biodegradable lubricants has been attracting considerable attention in recent times. Therefore, it is necessary to develop methods to test and evaluate the performance of such lubricants and compare them with conventional ones. In this sense, a Four-Ball Machine was modified allowing the test of rolling bearings. A 51107 thrust ball bearing was used to test two different greases and the corresponding base oils. Friction torque and operating temperatures were continuously monitored to quantify the power loss and the heat evacuation for each lubricant tested. Copyright © 2010 John Wiley & Sons, Ltd.

Low-loss austempered ductile iron gears: experimental evaluation comparing materials and lubricants

An experimental study to evaluate the power dissipation of gears was performed. Three low-loss gear models were manufactured using standard 20° pressure angle tools. Austempered ductile iron (ADI) and 20MnCr5 carburized steel gears were tested in an FZG gear test machine using mineral, ester and polyalphaolephine (PAO)-based oils. The results compare power dissipation, the influence of different tooth flank geometries, materials and lubricants. This work concludes that conventional power-transmission gears can be replaced by these improved and more efficient low–loss models, which can be produced using common tools and that steel gears can be successfully replaced by austempered ductile iron gears.

Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends

Polyolefins are especially difficult to bond due to their non-polar, non-porous and chemically inert surfaces. Acrylic adhesives used in industry are particularly suited to bond these materials, including many grades of polypropylene (PP) and polyethylene (PE), without special surface preparation. In this work, the tensile strength of single-lap PE and mixed joints bonded with an acrylic adhesive was investigated. The mixed joints included PE with aluminium (AL) or carbon fibre reinforced plastic (CFRP) substrates. The PE substrates were only cleaned with isopropanol, which assured cohesive failures. For the PE CFRP joints, three different surfaces preparations were employed for the CFRP substrates: cleaning with acetone, abrasion with 100 grit sand paper and peel-ply finishing. In the PE AL joints, the AL bonding surfaces were prepared by the following methods: cleaning with acetone, abrasion with 180 and 320 grit sand papers, grit blasting and chemical etching with chromic acid. After abrasion of the CFRP and AL substrates, the surfaces were always cleaned with acetone. The tensile strengths were compared with numerical results from ABAQUS® and a mixed mode (I+II) cohesive damage model. A good agreement was found between the experimental and numerical results, except for the PE AL joints, since the AL surface treatments were not found to be effective.

Information technology service management: an experimental approach towards IT service prediction

Dissertation presented to obtain a Masters degree in Computer Science

Temporal trends in the prevalence of asthma and rhinoconjunctivitis in adolescents

ABSTRACT OBJECTIVE To analyze the temporal trend of asthma and rhinoconjunctivitis prevalences as well as their symptoms in adolescents. METHODS Two cross-sectional studies were conducted using the same methodology and questionnaire as was used for adolescents aged 12 to 14 years in the Brazilian city of Florianopolis, SC, Southern Brazil. Based on the international protocol of the International Study of Asthma and Allergies in Childhood (ISAAC) study, adolescents were evaluated in 2001 and 3,150 in 2012. The schools included in this study were the same as in the 2001 study. These schools were randomly selected after stratification by network (public and private) and geographic location. The total average percentage variation was estimated for the prevalence of asthma and rhinoconjunctivitis and their symptoms. RESULTS The prevalence of reported asthma was 10.9% in 2001 and 14.8% in 2012, with an average variation of 2.8% in the period. The highest average variation in the period was observed among female adolescents (4.1%). In parallel a significant increase occurred in reported physician-diagnosed asthma, 7.3% in 2001 and 11,1% in 2012, with an annual variation of 4.5%. The largest increases in reported physician-diagnosed asthma were seen in female (5.9%) and male (4.5%) public school pupils. In addition, a significant increase in reported rhinoconjunctivitis occurred, with the average variation in the period being 5.2%. Reports of severe asthma symptoms remained unchanged during the period, while the annual variation for reported current wheezing (-1.3%) and wheezing during exercise (-1.2%) decreased. CONCLUSIONS The results showed a significant increase in the annual average variation for asthma and rhinoconjunctivitis prevalence during the 2001 to 2012 period.

An experimental study to compare the interface pressure and experience of healthy participants when lying still for 20 minutes in a supine position on two different imaging surfaces

Introduction: Pressure ulcers are a high cost, high volume issue for health and medical care providers, affecting patients’ recovery and psychological wellbeing. The current research of support surfaces on pressure as a risk factor in the development of pressure ulcers is not relevant to the specialised, controlled environment of the radiological setting. Method: 38 healthy participants aged 19-51 were placed supine on two different imaging surfaces. The XSENSOR pressure mapping system was used to measure the interface pressure. Data was acquired over a time of 20 minutes preceded by 6 minutes settling time to reduce measurement error. Qualitative information regarding participants’ opinion on pain and comfort was recorded using a questionnaire. Data analysis was performed using SPSS 22. Results: Data was collected from 30 participants aged 19 to 51 (mean 25.77, SD 7.72), BMI from 18.7 to 33.6 (mean 24.12, SD 3.29), for two surfaces, following eight participant exclusions due to technical faults. Total average pressure, average pressure for jeopardy areas (head, sacrum & heels) and peak pressure for jeopardy areas were calculated as interface pressure in mmHg. Qualitative data showed that a significant difference in experiences of comfort and pain was found in the jeopardy areas (P<0.05) between the two surfaces. Conclusion: A significant difference is seen in average pressure between the two surfaces. Pain and comfort data also show a significant difference between the surfaces, both findings support the proposal for further investigation into the effects of radiological surfaces as a risk factor for the formation of pressure ulcers.

ERICA: prevalence of asthma in Brazilian adolescents

ABSTRACT OBJECTIVE To describe the prevalence of asthma and physician-diagnosed asthma in Brazilian adolescents. METHODS Cross-sectional, national, school-based study with adolescents from 12 to 17 years old, participants in the Study of Cardiovascular Risks in Adolescents (ERICA). The study stratified the sample by region and grouped according to schools and classes with representativeness to the set of cities with more than 100,000 inhabitants of the Country, macro-regions, capitals, and Federal District. A questionnaire collected data through a self-filled in method. We calculated the prevalences and their confidence intervals of 95% (95%CI) according to sex, age group, type of school and skin color. RESULTS Between 2013 and 2014, 74,589 adolescents were evaluated, 55.3% of the female sex. The total prevalence of active asthma was of 13.1% (95%CI 12.1-13.9), being higher in girls (14.8%; 95%CI 13.7-16.0) when compared to boys (11.2%; 95%CI 10.3-12.2) in all geographical strata examined. It was also higher between students of private schools (15.9%; 95%CI 14.2-17.7) when compared to public ones (12.4%; 95%CI 11.4-13.4). It was higher in the Southeast region (14.5%; 95%CI 12.9-16.1), and in the city of Sao Paulo (16.7%; 95%CI 14.7-18.7). The lowest prevalence was observed in North region (9.7%; 95%CI 9.7-10.5), and in Teresina (6.3%; 95%CI 4.9-7.7). The prevalence of physician-diagnosed asthma was of 8.7% (95%CI 8.2-9.1); higher in the North region (13.5%; 95%CI 12.7-14.2), and in Porto Alegre (19.8%; 95%CI 17.5-22.3). It was lower in the Midwest (6.9%; 95%CI 6.0-7.8), and in Cuiaba (4.8%; 95%CI 3.8-5.9). We found no significant difference in the expression of this rate between the sexes, as well as in other variables evaluated by the study. CONCLUSIONS The prevalence of asthma in Brazilian adolescents is high. Rates of active asthma and physician-diagnosed asthma vary widely in different regions and capitals evaluated by the ERICA. These results may assist in the preparation of preventive programs and policies on health and a better understanding of the factors associated with asthma in this age group.

Experimental apparatus for finger ECG biometrics

Current Electrocardiographic (ECG) signal acquisition methods are generally highly intrusive, as they involve the use of pre-gelled electrodes and cabled sensors placed directly on the person, at the chest or limbs level. Moreover, systems that make use of alternative conductive materials to overcome this issue, only provide heart rate information and not the detailed signal itself. We present a comparison and evaluation of two types of dry electrodes as interface with the skin, targeting wearable and low intrusiveness applications, which enable ECG measurement without the need for any apparatus permanently fitted to the individual. In particular, our approach is targeted at ECG biometrics using signals collected at the hand or finger level. A custom differential circuit with virtual ground was also developed for enhanced usability. Our work builds upon the current stateof-the-art in sensoring devices and processing tools, and enables novel data acquisition settings through the use of dry electrodes. Experimental evaluation was performed for Ag/AgCl and Electrolycra materials, and results show that both materials exhibit adequate performance for the intended application.

O Mastomys natalensis como modelo alternativo nos estudos da esquistossomose mansoni experimental

Foram estudados aspectos da infecção e da imunidade experimentais em um roedor — o Mastomys natalensis — inoculado com a cepa LE (Belo Horizonte) do Schistosoma mansoni, comparando os resultados com os do camundongo albino, animal tido como melhor modelo experimental. Os parâmetros estudados ofereceram resultados em tudo semelhantes aos encontrados em camundongos, com o M. natalensis se mostrando bastante sensível à infecção pelo S. mansoni, sendo de grande utilidade para os estudos da biologia do parasito e/ou observações da imu-nologia advinda da infecção. Somando-se a tal fato a grande reprodutividade do animal em cativeiro, a criação fácil, o manejo e a manutenção simples em laboratório, sugere-se que seja o M. natalensis usado como modelo experimental alternativo nos diversos estudos da esquistossomose mansoni.