An investigation of container train service provision and load factors in Great Britain

The continued growth in the volume of international trade poses considerable economic and sustainability challenges, particularly as transport routes become more congested and concern grows about the role of transport movements in accelerating climate change. Rail freight plays a major role in the inland transport of containers passing through the main British container ports, and potentially could play a more significant role in the future. However, there is little detailed understanding of the nature of this particular rail market, especially in terms its current operating efficiency. This paper examines container train service provision to/from the four main ports, based on analysis of a representative survey of more than 500 container trains between February and August 2007. The extent to which the existing capacity is utilised is presented, and scenarios by which the number of containers carried could be increased without requiring additional train service provision are modelled, to identify the theoretical potential for greater rail volumes. Finally, the paper identifies the challenges involved in achieving higher load factors, emphasising the importance both of wider supply chain considerations and government policy decision-making.

A repeated measures experiment of school playing environment to increase physical activity and enhance self esteem in UK school children

School playtime provides daily opportunities for children to be active outdoors, but only makes small contributions to physical activity (PA) requirements. Natural environments facilitate unstructured PA and children report a preference for play in nature. Thus, play on the school field might encourage children to be more active during playtime. The primary aim of this study was to examine the impact of the school playing environment on children's PA. Descriptive data and fitness were assessed in 25 children aged 8–9 years from a single primary school. Over two consecutive weeks participants were allocated to either play on the school field or playground during playtime. The order of play in the two areas was randomised and counterbalanced. Moderate to vigorous PA (MVPA) was assessed during playtime on the last two days of each week using accelerometers. There was a significant interaction of environment and sex on MVPA during morning play (F(1,22) = 6.27; P<0.05; np2 = 0.222), but not during lunch (P>0.05; np2 = 0.060) or all of playtime combined (P>0.05; np2 = 0.140). During morning play boys were significantly more active than girls on the playground (t(23) = 1.32; P<0.01; n2 = 0.291), but not on the field (P>0.05; n2 = 0.071). For lunch (F(1,22) = 24,11; P<0.001; np2 = 0.523) and all of playtime combined (F(1,22) = 33.67; P<0.001; np2 = 0.616) there was a significant effect of environment. There was also a significant main effect of sex during lunch (F(1,22) = 11.56; P<0.01; np2 = 0.344) and all of playtime combined (F(1,22) = 12.37; P<0.01; np2 = 0.371). MVPA was higher on the field and boys were more active than girls. Play on the field leads to increases in MVPA, particularly in girls. The promising trend for the effect of the natural environment on MVPA indicates that interventions aimed at increasing MVPA should use the natural environment and that schools should encourage greater use of their natural areas to increase PA.

A repeated measures experiment of green exercise to improve self-esteem in UK school children

Exercising in natural, green environments creates greater improvements in adult's self-esteem than exercise undertaken in urban or indoor settings. No comparable data are available for children. The aim of this study was to determine whether so called ‘green exercise’ affected changes in self-esteem; enjoyment and perceived exertion in children differently to urban exercise. We assessed cardiorespiratory fitness (20 m shuttle-run) and self-reported physical activity (PAQ-A) in 11 and 12 year olds (n = 75). Each pupil completed two 1.5 mile timed runs, one in an urban and another in a rural environment. Trials were completed one week apart during scheduled physical education lessons allocated using a repeated measures design. Self-esteem was measured before and after each trial, ratings of perceived exertion (RPE) and enjoyment were assessed after completing each trial. We found a significant main effect (F (1,74), = 12.2, p<0.001), for the increase in self-esteem following exercise but there was no condition by exercise interaction (F (1,74), = 0.13, p = 0.72). There were no significant differences in perceived exertion or enjoyment between conditions. There was a negative correlation (r = −0.26, p = 0.04) between habitual physical activity and RPE during the control condition, which was not evident in the green exercise condition (r = −0.07, p = 0.55). Contrary to previous studies in adults, green exercise did not produce significantly greater increases in self-esteem than the urban exercise condition. Green exercise was enjoyed more equally by children with differing levels of habitual physical activity and has the potential to engage less active children in exercise.

Argonauta Video Database: Spectrography experiment. Scene 1 (Right câmera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 1: Comprises one of the scenes with one person performing spectography experiment. Video file labels: "20140327181335_IPCAM": recorded by the right camera

Argonauta Video Database: Spectography experiment. Scene 1 (Left camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 1: Comprises one of the scenes with one person performing spectography experiment. Video file labels:"20140327181336_IPCAM": recorded by the left camera.

Argonauta Video Database: Spectography experiment. Scene 2 (Right camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 2: Another take similat to Scene 1. Video file labels: "20140327180749_IPCAM": recorded by the right camera.

Argonauta Video Database: Spectography experiment. Scene 2 (Left camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 2: Another take similat to Scene 1. Video file labels: "20140327180750_IPCAM": recorded by the left camera.

Argonauta Video Database: Spectography experiment. Scene 3 (Right camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 3: Comprises the scene with two persons performing spectography experiment. Video file labels: "20140327182905_IPCAM": recorded by the right camera.

Argonauta Video Database: Spectography experiment. Scene 3 (Left camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 3: Comprises the scene with two persons performing spectography experiment. Video file labels: "20140327182906_IPCAM": recorded by the left camera.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

A physical packing sequence algorithm for the container loading problem with static mechanical equilibrium conditions

The container loading problem (CLP) is a combinatorial optimization problem for the spatial arrangement of cargo inside containers so as to maximize the usage of space. The algorithms for this problem are of limited practical applicability if real-world constraints are not considered, one of the most important of which is deemed to be stability. This paper addresses static stability, as opposed to dynamic stability, looking at the stability of the cargo during container loading. This paper proposes two algorithms. The first is a static stability algorithm based on static mechanical equilibrium conditions that can be used as a stability evaluation function embedded in CLP algorithms (e.g. constructive heuristics, metaheuristics). The second proposed algorithm is a physical packing sequence algorithm that, given a container loading arrangement, generates the actual sequence by which each box is placed inside the container, considering static stability and loading operation efficiency constraints.

Dynamic stability metrics for the container loading problem

The Container Loading Problem (CLP) literature has traditionally evaluated the dynamic stability of cargo by applying two metrics to box arrangements: the mean number of boxes supporting the items excluding those placed directly on the floor (M1) and the percentage of boxes with insufficient lateral support (M2). However, these metrics, that aim to be proxies for cargo stability during transportation, fail to translate real-world cargo conditions of dynamic stability. In this paper two new performance indicators are proposed to evaluate the dynamic stability of cargo arrangements: the number of fallen boxes (NFB) and the number of boxes within the Damage Boundary Curve fragility test (NB_DBC). Using 1500 solutions for well-known problem instances found in the literature, these new performance indicators are evaluated using a physics simulation tool (StableCargo), replacing the real-world transportation by a truck with a simulation of the dynamic behaviour of container loading arrangements. Two new dynamic stability metrics that can be integrated within any container loading algorithm are also proposed. The metrics are analytical models of the proposed stability performance indicators, computed by multiple linear regression. Pearson’s r correlation coefficient was used as an evaluation parameter for the performance of the models. The extensive computational results show that the proposed metrics are better proxies for dynamic stability in the CLP than the previous widely used metrics.

Impact of mobile app user acquisition on managerial decisions: Evidence from empirical experiment

In this research we conducted a mixed research, using qualitative and quantitative analysis to study the relationship and impact between mobile advertisement and mobile app user acquisition and the conclusions companies can derive from it. Data was gathered from management of mobile advertisement campaigns of a portfolio of three different mobile apps. We found that a number of implications can be extracted from this intersection, namely to product development, internationalisation and management of marketing budget. We propose further research on alternative app users sources, impact of revenue on apps and exploitation of product segments: wearable technology and Internet of Things.

Example of Data Telemetry for Biomedical Applications: An In Vivo Experiment

This letter describes a data telemetry biomedical experiment. An implant, consisting of a biometric data sensor, electronics, an antenna, and a biocompatible capsule, is described. All the elements were co-designed in order to maximize the transmission distance. The device was implanted in a pig for an in vivo experiment of temperature monitoring.