Análise da variabilidade climática sobre a produtividade da soja no município de Bom Jesus (PI)

The climate is still main responsible for the variations soybean productivity (Glycine max (L.) Merrill), exerting a limiting action on these agricultural systems. The bomjesuense cerrado, this culture has proved, over the years, an increase of cultivated areas, however, productivity does not keep the same pace, going through periods of oscillations. Thus, although the crop is added to high technology, culture has great vulnerability to climatic adversities. Thus, the present study aims to analyze possible trends in meteorological variables, which can influence the soybean yield in Bom Jesus. For this purpose, different datasets were used, as follows: i) two periods of daily data (1984-2014 and 1974-2014), both obtained from the National Meteorological Institute (INMET); ii) climate normals from 1961-1990 as defined by INMET; iii) local agricultural production data of soybean-year (1997/1998 to 2012/2013) obtained from the Municipal Agricultural Production (PAM) dataset, which is management by Brazilian Institute of Geography and Statistics (IBGE). The analysis procedures included calculations of climate normals for 1984 to 2014 period and some statistical applications, as follows: i) the Wilcoxon test, used to evaluate differences between climate normals (1961 to 1990 and 1984 to 2014); ii) the Mann-Kendall nonparametric test, in order to analyze the linear trend of agrometeorological variables (rainfall, maximum temperature, minimum temperature and diurnal range of temperature; iii) cluster analysis by Ward method and the Spearman correlation test (rs) to identify the relationship between agrometeorological variable and soybean annual productivity. We adopted a statistical significance level of 5%. The results indicate changes in seasonality of the 1984-2014 climatology with respect to past climatology for all variables analyzed, except for insolation and precipitation. However, the monthly analysis of precipitation indicate negative trend during October and positive trend in December, causing a delay in start of rainy season. If this trend is persistent this result must be considered in futures definitions of the soybean crop sowing date over the region studied. With Mann-Kendall test was possible to identify positive trends with statistical significance in maximum temperature for all month forming part of soybean cycle (from November to April), which in turn tends to cause adverse effects on crop physiology, and consequently impacts on the final yield. Was identified a significant positive correlation between soybean yield and precipitation observed in March, thus precipitation deficit in this month is harmful to the soybean crop development. No statistically significant correlation was identified among maximum temperature, minimum temperature, and DTR with annual soybean productivity due these range of meteorological variables are not limiting factors in the final soybean yield in Bom Jesus (PI). It is expected that this study will contribute to propose planning strategies considering the role of climate variability on soybean crop final yield.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Alteração do estado trófico durante um evento de seca prolongada e seus impactos na biomassa algal de um manancial tropical da região semiárida

The main consequence of eutrophication is an increase in algal biomass, mainly cyanobacterial blooms. The high evaporation and low precipitation, characteristics of semiarid regions, contribute to the nutrients availability increase in drought periods and consequent aggravation of eutrophic condition in reservoirs. Climate changes tend to intensify eutrophication symptoms, mostly in a semiarid region. Therefore, the aim of this study was to evaluate the impact of an extended drought in algal biomass in Parelhas’s Boqueirão, a mesotrophic reservoir located in a semiarid tropical region. The low volume was associated to water quality degradation and to the high nutrients concentrations and low water transparency. The increase in nutrients availability in the water column, consequence of reduced precipitation and low reservoir’s volume, provided the necessary resources for algal growth and allowed a change in trophic state in Boqueirão reservoir. This study showed how an extended drought decreases water quality. The effect of drought in Boqueirão was late detected due to the reservoir´s low initial nutrients concentration. The reservoir´s volume reduction increased the nutrient availability along with the algal biomass increase and the reservoir´s trophic state change of mesotrophic to eutrophic.

Deterministic and probabilistic verification of multi-model meteorological forecasts on the subseasonal timescale

In questo studio, un multi-model ensemble è stato implementato e verificato, seguendo una delle priorità di ricerca del Subseasonal to Seasonal Prediction Project (S2S). Una regressione lineare è stata applicata ad un insieme di previsioni di ensemble su date passate, prodotte dai centri di previsione mensile del CNR-ISAC e ECMWF-IFS. Ognuna di queste contiene un membro di controllo e quattro elementi perturbati. Le variabili scelte per l'analisi sono l'altezza geopotenziale a 500 hPa, la temperatura a 850 hPa e la temperatura a 2 metri, la griglia spaziale ha risoluzione 1 ◦ × 1 ◦ lat-lon e sono stati utilizzati gli inverni dal 1990 al 2010. Le rianalisi di ERA-Interim sono utilizzate sia per realizzare la regressione, sia nella validazione dei risultati, mediante stimatori nonprobabilistici come lo scarto quadratico medio (RMSE) e la correlazione delle anomalie. Successivamente, tecniche di Model Output Statistics (MOS) e Direct Model Output (DMO) sono applicate al multi-model ensemble per ottenere previsioni probabilistiche per la media settimanale delle anomalie di temperatura a 2 metri. I metodi MOS utilizzati sono la regressione logistica e la regressione Gaussiana non-omogenea, mentre quelli DMO sono il democratic voting e il Tukey plotting position. Queste tecniche sono applicate anche ai singoli modelli in modo da effettuare confronti basati su stimatori probabilistici, come il ranked probability skill score, il discrete ranked probability skill score e il reliability diagram. Entrambe le tipologie di stimatori mostrano come il multi-model abbia migliori performance rispetto ai singoli modelli. Inoltre, i valori più alti di stimatori probabilistici sono ottenuti usando una regressione logistica sulla sola media di ensemble. Applicando la regressione a dataset di dimensione ridotta, abbiamo realizzato una curva di apprendimento che mostra come un aumento del numero di date nella fase di addestramento non produrrebbe ulteriori miglioramenti.

Diversidade funcional em matas de galeria inundável e não inundável

As florestas ribeirinhas se dividem em matas ciliares e matas de galeria. As matas de galeria são importantes na manutenção dos recursos hídricos e da fauna a elas associada. Esses ambientes sofrem degradação e para a conservação e restauração são necessários estudos que entendam o funcionamento das espécies na comunidade. Os objetivos desse trabalho foram avaliar a variabilidade na área foliar específica em mata de galeria inundável do córrego do Glória (Uberlândia/MG) e mata de galeria não-inundável do ribeirão do Panga (Uberlândia/MG) e utilizar atributos reprodutivos como síndrome de polinização, síndrome de dispersão e sistema sexual, para comparação entre distintas áreas de mata de galeria inundável e também comparando com a mata de galeria não-inundável do Panga. Foram utilizados os dados florísticos já realizados nas matas de galeria não inundável do Panga (Uberlândia/MG), da mata de galeria inundável do Glória (Uberlândia/MG) e diversas outras matas de galeria inundável. A partir desses estudos foram calculados o IVC (Índice de Valor de Cobertura) e selecionadas as espécies. Para avaliar a variabilidade da área foliar específica foram utilizadas e as médias de AFE (área foliar específica) das espécies para comparação entre as duas áreas com o teste t de Student; já para analisar os padrões reprodutivos entre as matas de galeria inundável e compará-las com os padrões do Panga foram feitos testes de qui-quadrado. Os resultados do teste t mostraram que as médias das espécies da mata de galeria do Glória foram significativamente maiores do que as médias da mata de galeria do Panga. Protium heptaphyllum foi a única espécie co-ocorrente e também apresentou média significativamente maior na mata de galeria do Glória. As espécies vegetais com maiores AFE possuem uma maior captação de luz por unidade de biomassa investida, mas tendem a ter maior evaporação e perda de água. Por isso, a mata de galeria inundável, que não tem restrição hídrica para as espécies, pode apresentar maiores lâminas foliares. Com relação aos três atributos reprodutivos analisados, as áreas mostraram ser diferentes entre si e através de representação gráfica pode-se analisar que não houve padrões definidos entre as áreas, mas uma tendência a semelhanças entre várias áreas, principalmente em áreas próximas geograficamente, como as áreas de Uberlândia/MG. Quando comparados a padrões encontrados em outros estudos, as matas de galeria são semelhantes a outras áreas de floresta tropical, como alto índice de dioicia, que é relacionado a ambientes úmidos, maior porcentagem de dispersão zoocórica, especialmente por aves, e maior porcentagem de polinizadores generalistas, que são geralmente associados à dioicia.

Climatologia da pluviosidade na bacia hidrográfica do Rio Paranaíba

The main aim of this research was to study pluviosity in the Paranaíba Riverbasin, especially concerning the variability frame and trends. For this end, we used data from 22 pluviometric stations of the Agência Nacional da Águas- ANA(National Water Agency)spatially distributed throughout the basin area. The data comprised the years 1979-2013, which is a historical series of 35 years, and was downloaded through the ANA website and tabulated using the Hydro 1.2 software (2015) and Excel. After tabulation process were applied based methodologies for statistical analysis of annual variability, monthly, daily and seasonal rainfall in the basin beyond the trend analysis. Results of this research showed that the annual rainfall averageis 1491 mm. Seasonality is a hallmark and rainfall variability occurs spatially and temporally. Rains are accumulated in the rainy season accumulating 85% of the annual volume in the basin. In daily analysis it was found that the daily rainfall above 30 mm occur in only 3% of the time. Dry season comprises 15% of the rainfall. Trend analysis using linear regression pointed to a downward trend in rainfall in 46% of jobs, stability in 18% of posts and increased rainfall by 36%. As for the analysis using the sign test indicated that 32% of the analyzed rainfall stations showed an increasing trend of rainfall over the time series and 68% of stations showed downward trend. This research is important because shows how rainfall worksin the area of the Paranaiba basin, and may be used to develop better management of natural resources and the area through public policies for this purpose.

DISPERSÕES AQUOSAS DE POLIURETANO COMO MATERIAL BASE PARA O DESENVOLVIMENTO DE SISTEMAS DE LIBERTAÇÃO CONTROLADA DE CETOPROFENO

O cetoprofeno (ácido 2-(3-benzoilfenil) propiónico) é um anti-inflamatório não esteroidal (AINE) utilizado no tratamento de uma grande variedade de doenças inflamatórias agudas e crónicas incluindo a artrite reumatoide, osteoartrite e espondilite anquilosante. A sua administração oral prolongada está associada a diversas reações gastrointestinais, tais como irritações e ulcerações. Neste contexto, é importante desenvolver sistemas alternati-vos, nomeadamente sistemas de libertação controlada para administração oral, transdér-mica ou intradérmica. Este trabalho tem como objetivo testar a possibilidade de utilização de dispersões aquosas de poliuretano (PUDs) como material de suporte para a produção de sistemas de liberta-ção controlada de cetoprofeno. Numa primeira etapa, foram sintetizadas PUDs de base poliéster (policaprolactona, PCL) e poliéter (polipropileno-glicol, PPG) utilizando o méto-do de pré-polímero modificado. As dispersões obtidas foram caracterizadas em termos de pH, viscosidade, teor de sólidos e tamanho de partícula. Numa segunda etapa, foi testada a incorporação do cetoprofeno nas PDUs produzidas utilizando duas estratégias para incre-mentar a sua solubilidade em água: (i) utilização de um co-solvente (acetona, DMSO e HYD) e (ii) utilização de um surfactante não iónico (Tween 80). A incorporação foi testada para teores de 5% e 10% (razão fármaco/polímero, m/m). Os filmes produzidos pelo méto-do da evaporação do solvente foram avaliados quanto à sua homogeneidade e caracteriza-dos por FTIR e DSC. Numa terceira fase realizaram-se estudos de libertação em tampão de fosfato salino (PBS) de pH 7.5 tendo como objetivo avaliar a viabilidade de desenvolvimen-to de diferentes tipologias de dispositivos dependendo de um compromisso entre as pro-priedades dos filmes e o comportamento de libertação. Os resultados obtidos podem ajudar na seleção do material de base mais adequado para um determinado fim. Adicionalmente, e mais importante, comprovou-se a viabilidade de utilizar PUDs como material base para o desenvolvimento de sistemas de libertação con-trolada, utilizando como exemplo o cetoprofeno. A avaliação da toxicidade e da atividade anti-inflamatória dos filmes produzidos foi considerada estando em curso neste momento no grupo do Professor Armando Cunha Júnior.

Development and characterization of Poly(L-lactic acid) (PLLA) platforms for bone tissue engineering

The development of scaffolds based on biomaterials is a promising strategy for Tissue Engineering and cellular regeneration. This work focuses on Bone Tissue Engineering, the aim is to develop electrically tailored biomaterials with different crystalline and electric features, and study their impacts onto cell biological behavior, so as to predict the materials output in the enhancement of bone tissue regeneration. It is accepted that bone exhibits piezoelectricity, a property that has been proved to be involved in bone growth/repair mechanism regulation. In addition electrical stimulations have been proved to influence bone growth and repair. Piezoelectric materials are therefore widely investigated for a potential use in bone tissue engineering. The main goal is the development of novel strategies to produce and employ piezoelectric biomaterials, with detailed knowledge of mechanisms involved in cell-material interaction. In the current work, poly (L-lactic) acid (PLLA), a synthetic semi-crystalline polymer, exhibiting biodegradibility, biocompatibility and piezoelectricity is studied and proposed as a promoter of enhanced tissue regeneration. PLLA has already been approved for implantation in human body by the Food and Drug Administration (FDA), and at the moment it is being used in several clinical strategies. The present study consists of first preparing films with different degrees of crystallinity and characterizing these PLLA films, in terms of surface and structural properties, and subsequently assessing the behavior of cells in terms of viability, proliferation, morphology and mineralization for each PLLA configuration. PLLA films were prepared using the solvent cast technique and submitted to different thermal treatments in order to obtain different degrees of crystallinity. Those platforms were then electrically poled, positively and negatively, by corona discharge in order to tailor their electrical properties. The cellular assays were conducted by using two different osteoblast cell lines grown directly onto the PLLA films:Human osteoblast Hob, a primary cell culture and Human osteosarcoma MG-63 cell line. This thesis gives also a comprehensive introduction to the area of Bone Tissue Engineering and provides a review of the work done in this field in the past until today, in that same field, including the one related with bone’s piezoelectricity. Then the experimental part deals with the effects of the crystallinity degrees and of the polarization in terms of surface properties and cellular bio assays. Three different degrees of crystallinity, and three different polarization conditions were prepared; which results in 9 different configurations under investigation.

Projeto de reabilitação energética de piscinas interiores

O presente relatório de projeto explicita as etapas da elaboração e os resultados obtidos através da realização de um projeto de reabilitação energética de um complexo de piscinas interiores. Esta reabilitação energética tem por objetivo a redução dos custos energéticos através da subtração de consumos supérfluos de energia ou da melhoria da eficiência energética dos equipamentos. Para alcançar estes objetivos recorreu-se à simulação dinâmica do edifício de modo a estimar múltiplas variáveis energéticas e identificar quais os setores e equipamentos que maior influência têm no consumo energético do complexo em estudo. Para a realização da simulação, recorreu-se a um software desenvolvido pelo DOE dos Estados Unidos da América, o Energy Plus, com o auxílio do Design Builder, que permite a criação e edição do modelo de forma mais fácil e acessível. Os valores retirados da simulação foram posteriormente comparados com valores reais. Com o complexo caraterizado e os principais consumidores identificados foi possível iniciar o estudo das medidas de melhoria da eficiência energética. As principais medidas estudadas incidiram na instalação de coberturas isotérmicas nas piscinas para reduzir a perda de energia através da evaporação e da radiação, a introdução de fontes de energia renovável como alternativa energética, substituição de elementos do sistema de iluminação e o aproveitamento de energia dissipada em equipamentos. Com este estudo, a entidade gestora do complexo encontra-se mais informada e pronta a tomar decisões que influenciem de forma significativa o consumo de energia no complexo, podendo optar pela instalação de alguma das medidas propostas.

Diseño de un sistema de adquisición y visualización de los resultados, con base en el diagnóstico de los requisitos técnicos de la norma ISO/IEC 17025:2005, en la medición de la variable presión atmosférica en el Ideam

Tesis (Ingeniero(a) en Automatización).--Universidad de La Salle. Facultad de Ingeniería. Programa de Ingeniería en Automatización, 2014

ProgettoCNR Energy+: metodo di calcolo semplificato per la scomposizione della radiazione solare globale e la stima della produzione da fotovoltaico

Scopo del presente lavoro è la presentazione del codice di calcolo semplificato adoperato nella sezione “Simulatore fotovoltaico” presente sul portale www.energia.cnr.it del progetto CNR ENERGY+. Utilizzando i valori reali di radiazione solare misurati dalle stazioni meteorologiche installate presso alcune sedi del CNR il codice, con appropriati algoritmi, generala scomposizione della radiazione sul piano orizzontale e su superfici inclinate e variamente orientate, in modo da pervenire alla potenza prodotta da un ipotetico impianto fotovoltaico posto sullo stesso sito di ubicazione della stazione.

Geophysics: Principles, applications and emerging technologies

This book presents research in the field of Geophysics, particularly referring to principles, applications and emerging technologies. Table of Contents: Preface pp. i-xxi Environmental Geophysics: Techniques, advantages and limitations (Pantelis Soupios and Eleni Kokinou, Department of Environmental and Natural Resources Engineering, Technological Educational Institute of Crete, Dynamics of the Ocean Floor, Helmholtz Centre for Ocean Research Kiel, Geomar)pp i-xxi Application of Innovative Geophysical Techniques in Coastal Areas (V. Di Fiore, M. Punzo, D. Tarallo, and G. Cavuoto, Institute for Marine Coastal Environment, National Research Council, Naples)pp. i-xxi Marine Geophysics of the Naples Bay (Southern Tyrrhenian sea, Italy): Principles, Applications and Emerging Technologies (Gemma Aiello and Ennio Marsella, Institute for Marine Coastal Environment, National Research Council, Naples)pp. i-xxi Oceanic Oscillation Phenomena: Relation to Synchronization and Stochastic Resonance (Shinya Shimokawa and Tomonori Matsuura, National Research Institute for Earth Science and Disaster Prevention, Univ. of Toyama)pp. i-xxi Assessment of ocean variability in the Sicily Channel from a numerical three-dimensional model using EOFs decomposition (R. Sorgente, A. Olita, A.F. Drago, A. Ribotti, L. Fazioli, and C. Tedesco, Institute for Marine Coastal Environment, National Research Council, Oristano)pp. i-xxi Monitoring Test of Crack Opening in Volcanic Tuff (Coroglio Cliff. Italy) Using Distributed Optical Fiber Sensor (A. Minardo, A. Coscetta, M. Caccavale, G. Esposito, F. Matano, M. Sacchi, R. Somma, G. Zeni, and L. Zeni, Department of Industrial and Information Eng., Second University of Naples Aversa, Institute for Marine Coastal Environment, National Research Council Naples, National Institute for Geophysics and Volcanology, Osservatorio Vesuviano Naples, Institute for Electromagnetic Sensing of the Environment, National Research Council Naples)pp. i-xxi