Variabilidade genética em famílias de meios-irmãos de cafeeiro robusta

O cultivo do café é uma das atividades do agronegócio de maior importância socioeconômica dentre as diferentes atividades ligadas ao comércio agrícola mundial. Uma das maiores contribuições da genética quantitativa para o melhoramento genético é a possibilidade de prever ganhos genéticos. Quando diferentes critérios de seleção são considerados, a predição de ganhos referentes a cada critério tem grande importância, pois indica os melhoristas sobre como utilizar o material genético disponível, visando obter o máximo de ganhos possível para as características de interesse. O presente trabalho foi instalado em julho de 2004, na Fazenda Experimental de Bananal do Norte, conduzida pelo Incaper, no distrito de Pacotuba, município de Cachoeiro de Itapemirim, região Sul do Estado, com o objetivo de selecionar as melhores plantas entre e dentro de progênies de meios- irmãos de Coffea canephora, por meio de diferentes critérios de seleção. Foram realizadas análises de variância individuais e conjuntas para 26 progênies de meios- irmãos Coffea canephora. O delineamento experimental utilizado foi em blocos ao acaso com quatro testemunhas adicionais com quatro repetições e parcela composta por cinco plantas, com o espaçamento de 3,0 m x 1,2 m. Neste trabalho, considerou-se os dados das últimas cinco colheitas. As características mensuradas foram: florescimento, maturação, tamanho do grão, peso, porte, vigor, ferrugem, mancha cercóspora, seca de ponteiros, escala geral, porcentagem de frutos boia e bicho mineiro. Todas as análises estatísticas foram realizadas com o aplicativo computacional em genética e estatística (GENES). Foram estimados os ganhos de seleção em função da porcentagem de seleção de 20% entre e dentro, sendo as mesmas mantidas para todas as características. Todas as características foram submetidas a seleção no sentido positivo, exceto para florescimento, porte, ferrugem, mancha cercóspora, seca de ponteiros, porcentagem de frutos boia e bicho mineiro, para obter decréscimo em suas médias originais. Os critérios de seleção estudados foram: seleção convencional entre e dentro das famílias, índice de seleção combinada, seleção massal e seleção massal estratificada. Esta dissertação é composta por dois capítulos, em que foram realizadas análises biométricas, como a obtenção de estimativas de parâmetros genéticos. Na maioria das características estudadas, verificaram-se diferenças significativas (P<0,05) para genótipos que, associados aos coeficientes de variação genotípicos e também ao coeficiente de determinação genotípico e à relação CVg/CVe, indicam a existência de variabilidade genética nos materiais genéticos para a maioria das características e condições favoráveis para obtenção de ganhos genéticos pela seleção. Essas características também foram correlacionadas. Os dados foram submetidos às análises de variância e multivariada, aplicando-se a técnica de agrupamento e UPGMA, teste de médias e estudo de correlações. Na técnica de agrupamento, foi utilizada a distância generalizada de Mahalanobis como medida de dissimilaridade, e na delimitação dos grupos, o método de Tocher. Foi encontrada diversidade genética para as características associadas à qualidade fisiológica, mobilização de reserva das sementes, dimensões e biomassa das plântulas. Quatro grupos de genótipos puderam ser formados. Peso de massa seca de sementes, redução de reserva de sementes e peso de massa seca de plântulas estão positivamente correlacionados entre si, enquanto a redução de reserva das sementes e a eficiência na conversão dessas reservas em plântulas estão negativamente correlacionadas. De acordo com os resultados obtidos, verificou-se que todas as características apresentaram níveis diferenciados de variabilidade genética e os critérios de seleção utilizados mostraram-se eficientes para o melhoramento, no qual o índice de seleção combinada é o critério de seleção que apresentou os melhores resultados em termos de ganhos, sendo indicado como critério mais apropriado para o melhoramento genético da população estudada. Nos estudos de correlações, em 70% dos casos, a correlação fenotípica foi superior à genotípica, mostrando maior influência dos fatores ambientais em relação aos genotípicos e condições propícias ao melhoramento dos diferentes caracteres. No estudo de divergência genética, observou-se que pelo agrupamento de genótipos, pela técnica de Tocher, indicou que os genótipos foram distribuídos em três grupos.

Brazil and the economic, political, and environmental multilateralism: the Lula years (2003-2010)

This article discusses Brazil's multilateral policy under Luiz Inácio Lula da Silva's administration, highlighting economic, political and environmental themes. The main argument is that Brazil's multilateral relations during this government reached a new significance with the reinforcement of international coalitions and the articulation with the country's new development model. The country has been using multilateral forums as a way to achieve international projection and support for its development project, highlighting bargaining aspects, variable geometry coalitions and the strengthening of South-South cooperation

The G-77, BASIC, and global climate governance: a new era in multilateral environmental negotiations

The G-77 has historically organized the participation of developing countries in multilateral environmental negotiations. This article analyses the impact of a new coalition of emerging powers - Brazil, China, India, and South Africa as BASIC - on the G-77's role in climate governance. While there are important benefits for both sides in their relationship, I argue that the G-77 is also disadvantaged in several concrete ways by the BASIC countries.

Environmental issues and international relations, a new global (dis)order - the role of International Relations in promoting a concerted international system

Is it possible to talk about the rise of a new global (dis)order founded on the challenges posed by environmental issues? Through the review of the state of the art on the subject, this article analyzes the growing importance of the environment, and natural resources in particular, in international relations; and aims to raise awareness among International Relations scholars to the potential positive impact of the development of the discipline in integration with global environmental change studies.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

The quest for a sustainable product: An environmental study of tyre recyclates

The main objective of the present study is to assess the environmental advantages of substituting aluminium for a polymer composite in the manufacture of a structural product (a frame to be used as a support for solar panels). The composite was made of polypropylene and a recycled tyres’ rubber granulate. Analysis of different composite formulations was performed, to assess the variation of the environmental impact with the percentage of rubber granulate incorporation. The results demonstrate that the decision on which of the two systems (aluminium or composite) has the best life cycle performance is strongly dependent on the End-of Life (EoL) stage of the composite frame. When the EoL is deposition in a landfill, the aluminium frame performs globally better than its composite counterpart. However, when it is incineration with energy recovery or recycling, the composite frame is environmentally preferable. The raw material production stage was found to be responsible for most of the impacts in the two frame systems. In that context, it was shown that various benefits can accrue in several environmental impact categories by recycling rubber tyres and using the resulting materials. This is in a significant part also due to the recycling of the steel in the tyres. The present work illustrates how it is possible to minimize the overall environmental impact of consumer products through the adequate selection of their constitutive materials in the design stage. Additionally it demonstrates how an adequate EoL planning can be an important issue when developing a sustainable product, since it can highly influence its overall life cycle performance.

Improving the environmental performance of bedding products by using life cycle assessment at the design stage

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective.

Correlation between grain nutritional content and pasting properties of pre-gelatinized red rice flour

As with any variety of rice, red rice characteristics are subject to varietal differences, growing conditions, types of processing, and nutritional and rheological properties. This study determined the nutritional characteristics (centesimal composition and minerals) and paste viscosity properties of raw grains of four red rice genotypes (Tradicional MNAPB0405, MNACE0501 and MNACH0501) and the paste viscosity properties of pre-gelatinized flours obtained at different cooking times (20, 30 and 40 min). The main nutritional properties were correlated with the pasting properties of the pre-gelatinized flours. The samples showed differences in nutritional properties and paste viscosity. MNAPB0405 and MNACE0501 showed higher levels of fiber and fat and provided higher caloric energy than Tradicional and MNACH0501, which, in turn, showed higher levels of amylose. MNACH0501 showed higher peak viscosity (2402 cP), higher breakdown viscosity (696 cP) and a greater tendency to retrogradation (1510 cP), while Tradicional, MNAPB0405 and MNACE0501 had pasting profiles with peak viscosities varying between 855 and 1093 cP, breaking viscosity below 85 cP and retrogradation tendency between 376 and 1206 cP. The factors genotype and cooking time influenced the rheological behavior of pre-gelatinized flours, decreasing their pasting properties. The protein and amylose levels are correlated with the pasting properties and can be used as indicators of these properties in different genotypes of red rice, whether raw or processed into pre-gelatinized flours.

Determining factors of environmental management practices in portuguese local entities

Purpose: The aim of this paper is to analyse the development of environmental management practices by Portuguese local entities and their determining factors. Design/methodology/approach: The data were collected by sending a postal questionnaire. In order to measure the degree of development of environmental management practices an index of environmental management practices (EMPI) was developed, which reflects the extent to which a set of 16 environmental management practices have been implemented by the entities included in the sample. Four variables are considered in this study as possible factors that drive the development of environmental management practices by local entities, namely type of entity, size, proactive environmental strategy and Local Agenda 21 Findings: Results indicate the degree of development of environmental management practices in Portuguese local entities is low. Additionally, entity size, the adoption of proactive environmental strategies and the implementation of Local Agenda 21 are explaining factors of the degree of development of such practices. Originality/value: This study adds to the international research on environmental management in public sector by providing empirical data from a country, Portugal, where empirical evidence is still relatively limited.

Determining factors of environmental management practices in portuguese local entities

Purpose – The purpose of this paper is to analyse the development of environmental management practices by Portuguese local entities and their determining factors. Design/methodology/approach – The data were collected by sending a postal questionnaire. In order to measure the degree of development of environmental management practices, an index of environmental management practices (EMPI) was developed, which reflects the extent to which a set of 16 environmental management practices have been implemented by the entities included in the sample. In total, four variables are considered in this study as possible factors that drive the development of environmental management practices by local entities: type of entity; size; proactive environmental strategy; and Local Agenda 21. Findings – Results indicate the degree of development of environmental management practices in Portuguese local entities is low. Additionally, entity size, the adoption of proactive environmental strategies and the implementation of Local Agenda 21 are explaining factors of the degree of development of such practices. Originality/value – The paper adds to the international research on environmental management in the public sector by providing empirical data from a country, Portugal, where empirical evidence is still relatively limited.

Determinants of environmental disclosure in the annual reports of large companies operating in Portugal

Similarly to what has happened in other countries, since the early 1990s Portuguese companies have developed corporate environmental reporting practices in response to internal and external factors. This paper is based on empirical research directed to both the study of environmental reporting practices developed by Portuguese companies and the identification of the factors that explain the extent to which these companies disclose environmental information. This study focuses on the environmental disclosures made in the annual reports by a sample of 109 large firms operating in Portugal during the period 2002-04. Using the content analysis technique we have developed an index in order to assess the presence of the environmental disclosures in companies’ annual reports and their breadth. Based on the extant literature, several characteristics relating to firms’ attributes were selected and their influence on the level of environmental disclosure was tested empirically. The selected explanatory variables were firm size, industry membership, profitability, foreign ownership, quotation on the stock market and environmental certification. The results reveal that, in spite of the fact that the level of environmental information disclosed during the period 2002-04 is low, the extent of environmental disclosure has increased as well as the number of Portuguese companies that disclose environmental information. Moreover, the firm size and the fact that a company is listed on the stock market are positively related to the extent of environmental disclosure. This study adds to the international research on environmental disclosure by providing empirical data from a country, Portugal, where empirical evidence is still relatively unknown, extending the scope of the current understanding of the environmental reporting practices.

Organizational and accounting change within the context of the environmental agenda: evidence from Portugal

Purpose – The purpose of this paper is to explore the process of organizational change undergone by a large Portuguese business group within the context of the environmental agenda and the role of accounting as a mechanism for change. Design/methodology/approach – The paper reports the results of a case study conducted between 2006 and 2009. Information was obtained from semi-structured interviews and secondary sources. Organizational changes were analyzed using Laughlin’s model in order to identify which category reflected most of the changes introduced to address environmental matters. Findings – This paper offers evidence that change is not a homogeneous phenomenon. Additionally, it confirms previous studies’ findings which found that accounting did not play a significant role in the process of organizational change within the context of the environmental agenda. Originality/value – This paper seeks to complement the research in this area by integrating observations from a case study into an existing model of levels of organizational change according to how a Portuguese business group incorporated environmental issues into its processes, policies and corporate culture.

Environmental performance of aquaculture in Rondônia state, Brazil

The objective of this study was to analyze the environmental performance of aquaculture in the city of Colorado do Oeste, Rondônia State, Brazil. Fifteen fish farmers were interviewed. For data collection, structured interviews were carried out, using a questionnaire based on information supplied by the United Nations Food and Agriculture Organization (FAO). The questionnaire considered 12 items, organized into three main topics: a) social and legal standards b) environmental standards c) standards of food safety and hygiene. The questionnaire considered 12 items, organized into three main topics: a) social and legal standards b) environmental standards c) standards of food safety and hygiene. Aquaculture in the city of Colorado do Oeste, Rondônia presents two fish production systems: extensive and semi-intensive. In the semi-intensive system, stocking rate was one fish per m3, on average; tambaqui (Colossoma macropomum), tilapias (Oreochromis spp.), pirarucu (Arapaima gigas) and pintado (Pseudoplatystoma spp.) were the species farmed at the largest number. The rate of water renewal was due to the greater availability of natural food in this system. Water renewal was constant in the ponds (1,500 liters per minute). In the semi-intensive system using dug ponds, alevins were stocked and fed during the entire rearing time with natural and exogenous food. The extensive system relied on the natural production of the pond, with stocking density limited by the production of natural food. The little renewal of water made the cultivation tank itself acted as a decantation lake, with the occurrence of oxidation and sedimentation of residual organic matter, consisting of feces, debris and organic fertilizer. Production of reduced effluent volume took place in the extensive system, compared to the cultivation area. In addition, there was high water turbidity, caused by high concentration of planktonic organisms, and low concentrations of dissolved oxygen in the water. Data showed that nine estates of the interviewed fish farmers had critical environmental performance (less than 30.0%). Six estates of fish farmers had bad environmental performance (between 30.0 and 50.0%) (Coefficient of sustentainability = green square x 100 ÷ Total Questions less the yellow squares)

Geographical patterns of proportionate mortality for the most common causes of death in Brazil

Mortality due to chronic diseases has been increasing in all regions of Brazil with corresponding decreases in mortality from infectious diseases. The geographical variation in proportionate mortality for chronic diseases for 17 Brazilian state capitals for the year 1985 and their association with socio-economic variables and infectious disease was studied. Calculations were made of correlation coefficients of proportionate mortality for adults of 30 years or above due to ischaemic heart disease, stroke and cancer of the lung, the breast and stomach with 3 socio-economic variables, race, and mortality due to infectious disease. Linear regression analysis included as independent variables the % of illiteracy, % of whites, % of houses with piped water, mean income, age group, sex, and % of deaths caused by infectious disease. The dependent variables were the % of deaths due to each one of the chronic diseases studied by age-sex group. Chronic diseases were an important cause of death in all regions of Brazil. Ischaemic heart diseases, stroke and malignant neoplasms accounted for more than 34% of the mortality in each of the 17 capitals studied. Proportionate cause-specific mortality varied markedly among state capitals. Ranges were 6.3-19.5% for ischaemic heart diseases, 8.3-25.4% for stroke, 2.3-10.4% for infections and 12.2-21.5% for malignant neoplasm. Infectious disease mortality had the highest (p < 0.001) correlation with all the four socio-economic variables studied and ischaemic heart disease showed the second highest correlation (p < 0.05). Higher socio-economic level was related to a lower % of infectious diseases and a higher % of ischaemic heart diseases. Mortality due to breast cancer and stroke was not associated with socio-economic variables. Multivariate linear regression models explained 59% of the variance among state capitals for mortality due to ischaemic heart disease, 50% for stroke, 28% for lung cancer, 24% for breast cancer and 40% for stomach cancer. There were major differences in the proportionate mortality due to chronic diseases among the capitals which could not be accounted for by the social and environmental factors and by the mortality due to infectious disease.