Clasificación de tráfico de Internet mediante análisis de datos

Poder clasificar de manera precisa la aplicación o programa del que provienen los flujos que conforman el tráfico de uso de Internet dentro de una red permite tanto a empresas como a organismos una útil herramienta de gestión de los recursos de sus redes, así como la posibilidad de establecer políticas de prohibición o priorización de tráfico específico. La proliferación de nuevas aplicaciones y de nuevas técnicas han dificultado el uso de valores conocidos (well-known) en puertos de aplicaciones proporcionados por la IANA (Internet Assigned Numbers Authority) para la detección de dichas aplicaciones. Las redes P2P (Peer to Peer), el uso de puertos no conocidos o aleatorios, y el enmascaramiento de tráfico de muchas aplicaciones en tráfico HTTP y HTTPS con el fin de atravesar firewalls y NATs (Network Address Translation), entre otros, crea la necesidad de nuevos métodos de detección de tráfico. El objetivo de este estudio es desarrollar una serie de prácticas que permitan realizar dicha tarea a través de técnicas que están más allá de la observación de puertos y otros valores conocidos. Existen una serie de metodologías como Deep Packet Inspection (DPI) que se basa en la búsqueda de firmas, signatures, en base a patrones creados por el contenido de los paquetes, incluido el payload, que caracterizan cada aplicación. Otras basadas en el aprendizaje automático de parámetros de los flujos, Machine Learning, que permite determinar mediante análisis estadísticos a qué aplicación pueden pertenecer dichos flujos y, por último, técnicas de carácter más heurístico basadas en la intuición o el conocimiento propio sobre tráfico de red. En concreto, se propone el uso de alguna de las técnicas anteriormente comentadas en conjunto con técnicas de minería de datos como son el Análisis de Componentes Principales (PCA por sus siglas en inglés) y Clustering de estadísticos extraídos de los flujos procedentes de ficheros de tráfico de red. Esto implicará la configuración de diversos parámetros que precisarán de un proceso iterativo de prueba y error que permita dar con una clasificación del tráfico fiable. El resultado ideal sería aquel en el que se pudiera identificar cada aplicación presente en el tráfico en un clúster distinto, o en clusters que agrupen grupos de aplicaciones de similar naturaleza. Para ello, se crearán capturas de tráfico dentro de un entorno controlado e identificando cada tráfico con su aplicación correspondiente, a continuación se extraerán los flujos de dichas capturas. Tras esto, parámetros determinados de los paquetes pertenecientes a dichos flujos serán obtenidos, como por ejemplo la fecha y hora de llagada o la longitud en octetos del paquete IP. Estos parámetros serán cargados en una base de datos MySQL y serán usados para obtener estadísticos que ayuden, en un siguiente paso, a realizar una clasificación de los flujos mediante minería de datos. Concretamente, se usarán las técnicas de PCA y clustering haciendo uso del software RapidMiner. Por último, los resultados obtenidos serán plasmados en una matriz de confusión que nos permitirá que sean valorados correctamente. ABSTRACT. Being able to classify the applications that generate the traffic flows in an Internet network allows companies and organisms to implement efficient resource management policies such as prohibition of specific applications or prioritization of certain application traffic, looking for an optimization of the available bandwidth. The proliferation of new applications and new technics in the last years has made it more difficult to use well-known values assigned by the IANA (Internet Assigned Numbers Authority), like UDP and TCP ports, to identify the traffic. Also, P2P networks and data encapsulation over HTTP and HTTPS traffic has increased the necessity to improve these traffic analysis technics. The aim of this project is to develop a number of techniques that make us able to classify the traffic with more than the simple observation of the well-known ports. There are some proposals that have been created to cover this necessity; Deep Packet Inspection (DPI) tries to find signatures in the packets reading the information contained in them, the payload, looking for patterns that can be used to characterize the applications to which that traffic belongs; Machine Learning procedures work with statistical analysis of the flows, trying to generate an automatic process that learns from those statistical parameters and calculate the likelihood of a flow pertaining to a certain application; Heuristic Techniques, finally, are based in the intuition or the knowledge of the researcher himself about the traffic being analyzed that can help him to characterize the traffic. Specifically, the use of some of the techniques previously mentioned in combination with data mining technics such as Principal Component Analysis (PCA) and Clustering (grouping) of the flows extracted from network traffic captures are proposed. An iterative process based in success and failure will be needed to configure these data mining techniques looking for a reliable traffic classification. The perfect result would be the one in which the traffic flows of each application is grouped correctly in each cluster or in clusters that contain group of applications of similar nature. To do this, network traffic captures will be created in a controlled environment in which every capture is classified and known to pertain to a specific application. Then, for each capture, all the flows will be extracted. These flows will be used to extract from them information such as date and arrival time or the IP length of the packets inside them. This information will be then loaded to a MySQL database where all the packets defining a flow will be classified and also, each flow will be assigned to its specific application. All the information obtained from the packets will be used to generate statistical parameters in order to describe each flow in the best possible way. After that, data mining techniques previously mentioned (PCA and Clustering) will be used on these parameters making use of the software RapidMiner. Finally, the results obtained from the data mining will be compared with the real classification of the flows that can be obtained from the database. A Confusion Matrix will be used for the comparison, letting us measure the veracity of the developed classification process.

Estudio de la estabilidad genética asociada a los procesos de crioconservación de ápices de menta

La crioconservación se ha descrito como una técnica de conservación ex situ a largo plazo que ha sido aplicada con éxito a numerosas especies, y resulta especialmente importante en aquellas con propagación vegetativa, infértiles o amenazadas, en las que sistemas de conservación ex situ más sencillos, como los bancos de semillas, no son posibles. También presenta ventajas frente a la conservación in vitro, ya que logra disminuir o eliminar problemas como la excesiva manipulación del material, evitando los subcultivos periódicos y disminuyendo así el riesgo de contaminaciones y de aparición de variación somaclonal. Sin embargo, someter al material vegetal a los procedimientos que implica la crioconservación provoca distintos estreses. Entre ellos, el estrés oxidativo puede potencialmente producir daños en membranas, proteínas, carbohidratos y en el ADN. En este trabajo se han evaluado diversos sistemas de crioconservación en ápices de Mentha × piperita L., híbrido estéril entre Mentha aquatica L. y Mentha spicata L. Se han utilizado ápices de dos genotipos (‘MEN 186’y ‘MEN 198’) en los cuales se compararon dos técnicas de crioconservación, encapsulación-deshidratación y vitrificación-droplet. El análisis de la supervivencia y capacidad de regeneración del material sometido a los tratamientos de crioconservación, junto con el análisis de la estabilidad genética de dicho material mediante marcadores moleculares (RAPD y AFLP) han permitido comparar los distintos protocolos y tratamientos establecidos. El estudio sobre el tipo de protocolo empleado reveló una mayor variabilidad genética en la técnica de encapsulación-deshidratación, especialmente en el genotipo ‘MEN 186’, ya que ‘MEN 198’ resultó ser más estable en todos los análisis. La inestabilidad encontrada en esta técnica no fue exclusiva de aquellos explantos crioconservados, sino que los pasos previos a la inmersión en nitrógeno líquido (NL) también provocaron variaciones en el ADN. Según el tipo de muestra analizada se encontraron diferencias en la estabilidad: muestras provenientes de callos presentaron una mayor inestabilidad que aquellas de hojas (brotes). Se utilizaron tres medios para la recuperación de los ápices tras la crioconservación con el uso de diferentes combinaciones de reguladores de crecimiento: “Reed” (0,5 mgL-1 6-bencilaminopurina, BAP), “Senula” (0,5 mgL-1 6-dimetilalilamino-purina, 2-iP + 0,1 mgL-1 ácido α-naftalen-acético, ANA) y “Nudos” (0,5 mgL-1 BAP + 0,1 mgL-1ANA). El medio “Reed” produjo un aumento en la supervivencia y recuperación de los ápices en ambos genotipos y técnicas, y disminuyó la formación de callo. Sin embargo, no tuvo un efecto significativo en la estabilidad genética. El medio “Senula” provocó una mayor estabilidad genética en el genotipo más inestable, ‘MEN 186’. Para reducir el daño oxidativo producido durante la encapsulación-deshidratación, e incrementar la recuperación de los ápices manteniendo su estabilidad genética, se comparó el efecto de añadir sustancias antioxidantes en el precultivo de los ápices (ácido ascórbico, vitamina E y glutatión). No se obtuvo la respuesta esperada y estos tratamientos no presentaron efectos significativos tanto en la estabilidad como en la recuperación. Para entender mejor qué sucede durante todo el proceso de encapsulación-deshidratación, se evaluó cada paso del protocolo por separado y su efecto en la estabilidad y la recuperación. Además, se determinó el estado de oxidación en cada etapa mediante la cuantificación de malondialdehído y la detección de la formación de radicales libres (mediante el ensayo del ácido tiobarbitúrico, y sondas fluorescentes específicas, respectivamente). Se determinó que a partir de los primeros pasos se genera estrés oxidativo, el cual aumenta a medida que se avanza por el protocolo hasta la inmersión en nitrógeno líquido. Esto se ve reflejado en la disminución progresiva tanto de la recuperación como de la estabilidad genética. Con el uso de antioxidantes en el precultivo (ácido ascórbico y vitamina E) no se obtuvo un efecto positivo en el mantenimiento de la estabilidad genética, y tan sólo con el uso de vitamina E se observó una recuperación mayor en uno de los pasos estudiados (después de la desecación). Sin embargo, cuando se utilizó ácido ascórbico durante el precultivo o la deshidratación osmótica se consiguió disminuir de forma significativa la formación de MDA y la acumulación del radical superóxido (O2•-) en la mayoría los pasos analizados, aunque esta reducción no parece tener un efecto directo en la estabilidad genética del material recuperado. ABSTRACT Cryopreservation has been described as an effective technique for the long term of ex situ conservation that has been successfully applied to numerous species, and is of especial relevance for those with vegetative propagation, infertile or endangered, in which simpler systems of ex situ conservation, such as seed banking, are not feasible. It also has advantages over in vitro conservation, as it reduces or eliminates excessive material handling, avoids periodic subcultures and thus limits the risk of contamination and the appearance of somaclonal variation. However, plant material is subjected to different treatments involved in the cryopreservation procedures, which impose several stresses. Among them, oxidative stress can potentially cause damage to membranes, proteins, carbohydrates and DNA. In this work, two cryopreservation techniques have been evaluated in Mentha × piperita L. shoot tips, sterile hybrid between Mentha aquatica L. and Mentha spicata L. Two genotypes ('MEN 186' and 'MEN 198') were used to compare two techniques: encapsulation-dehydration and droplet-vitrification. The analysis of survival and recovery capacity of the material after the cryopreservation treatments, and the analysis of the genetic stability by molecular markers (RAPD and AFLP) have enabled the comparison between protocols and treatments. The study of the two cryopreservation procedures revealed a higher genetic variability in the encapsulation-dehydration technique, especially in genotype 'MEN 186', as 'MEN 198' was more stable in all analyses. The instability generated in this technique was not exclusive of cryopreserved explants, pretreatments prior to immersion in NL also caused DNA variations. The type of sampled plant material revealed also differences in the stability: callus samples showed greater instability than shoots. Three different culture media were used for the recovery of shoot tips after cryopreservation, using different combinations of growth regulators: "Reed" (0.5 mgL-1 6-benzylaminopurine, BAP), "Senula" (0.5 mgL-1 6-dimetilalilamino-purine, 2-iP + 0.1 mgL-1 α-naphthalene acetic acid, ANA) and "Nodes" (0.5 mgL-1 BAP + 0.1 mgL-1 ANA). "Reed" medium increased survival and recovery of shoot tips in both genotypes and techniques and decreased callus formation. However, it didn`t have a significant effect on genetic stability. "Senula" medium caused a higher genetic stability in the most unstable genotype, 'MEN 186'. To reduce oxidative damage during encapsulation-dehydration, and increase shoot tip recovery and maintain genetic stability, the effect of added antioxidants (ascorbic acid, vitamin E and glutathione) in the shoot tip preculture medium was studied. These treatments had no significant effect on both stability and recovery. To better understand the events during the encapsulation-dehydration process, the effect of each step of the protocol on stability and recovery was evaluated separately. Moreover, the oxidation level was determined by quantifying malondialdehyde (MDA) formation and detecting free radical accumulation (using the thiobarbituric acid assay, and specific fluorescent probes, respectively). The oxidative stress was detected from the first steps and increased throughout the protocol until the immersion in liquid nitrogen. This was also reflected in the gradual decline of recovery and genetic stability. The use of antioxidants (ascorbic acid and vitamin E) in the shoot tip preculture medium had no effect in maintaining genetic stability; only vitamin E increased recovery in one of the steps studied (after desiccation). However, when ascorbic acid was used during the preculture or during the osmotic dehydration, a significantly decrease was observed in MDA formation and superoxide radical accumulation in most of the steps analyzed, although this reduction did not seem to have a direct effect on the genetic stability of recovered material.

Conservación de plantas regeneradas in vitro y análisis de la variación somaclonal de Cinchona officinalis, Linneo

Cinchona officinalis (Rubiaceae), especie endémica del Valle de Loja, ubicado en la región sur del Ecuador, es un recurso forestal de importancia medicinal y ecológica, además la especie ha sido catalogada como planta nacional y es un ícono de la región sur por su aporte a la farmacopea mundial. Esta especie, entre los siglos XVII-XIX sufrió una gran presión en sus poblaciones debido a la extracción masiva de la corteza para la cura del paludismo. Aunque la actividad extractiva generó grandes ingresos a la Corona Española y a la región Sur del Ecuador, ésta fue poco o nada sustentable ecológicamente, provocando la desaparición de la especie en muchos sitios de la provincia, pues, en su momento, no se consideraron alternativas de recuperación de las poblaciones naturales. Actualmente la extracción y consumo de la corteza en la zona de origen es baja o nula, sin embargo esta zona enfrenta nuevas amenazas. La deforestación a causa de proyectos de desarrollo en infraestructuras, la práctica de actividades agrícolas y de ganadería, y los efectos del cambio climático han ocasionado, en estos últimos años, la fragmentación de los ecosistemas. La mayoría de los bosques del sur del Ecuador se han convertido en parches aislados (los bosques en los que se distribuye C. officinalis no son la excepción) siendo esta la principal causa para que la especie se encuentre en estado de amenaza. Los individuos de la especie tienen una alta capacidad de rebrote y producen semillas durante todo el año; sin embargo la capacidad germinativa y la tasa de sobrevivencia son bajas, además de estas dificultades la especie requiere de la asociación con otras especies vegetales para su desarrollo, lo cual ha limitado su distribución en pequeños parches aislados. Con esta problemática, la recuperación natural de las poblaciones es una necesidad evidente. Varios trabajos y esfuerzos previos se han realizado a nivel local: i. Identificación de la distribución actual y potencial; ii. Determinación de la fenología y fructificación iii. Programas de educación ambiental, iv. Análisis moleculares para determinar la diversidad genética. v. Ensayos de propagación vegetativa; y otras acciones de tipo cultural. No obstante, el estado de conservación y manejo de las poblaciones naturales no ha mejorado significativamente, siendo necesaria la aplicación de estrategias integradas de conservación in situ y ex situ, que permitan la recuperación y permanencia de las poblaciones naturales a largo plazo. El presente trabajo tiene como fin dar alternativas para el cultivo de tejidos in vitro de Cinchona officinalis centrados en la propagación masiva a partir de semillas, análisis de la fidelidad genética y alternativas de conservación de tejidos. Los objetivos específicos que se plantean son: i. Analizar el proceso de germinación y proliferación in vitro. ii. Evaluar la estabilidad genética en explantes cultivados in vitro, mediante marcadores ISSR. iii. Establecer protocolos de conservación in vitro mediante limitación del crecimiento y criopreservación de segmentos nodales y yemas. Los resultados más significativos de esta investigación fueron: i. El desarrollo de protocolos eficientes para mejorar los porcentajes de germinación y la proliferación de brotes en explantos cultivados in vitro. Para evaluar el efecto de los fenoles sobre la germinación, se determinó el contenido total de fenoles y el porcentaje de germinación en semillas de C. officinalis comparados con una especie de control, C. pubescens. Para inducir a proliferación, se utilizaron segmentos nodales de plántulas germinadas in vitro en medio Gamborg (1968) suplementado con diferentes combinaciones de reguladores de crecimiento (auxinas y citoquininas). Los resultados obtenidos sugieren que el contenido de compuestos fenólicos es alto en las semillas de C. officinalis en comparación con las semillas de C. pubescens. Estos fenoles pueden eliminarse con peróxido de hidrógeno o con lavados de agua para estimular la germinación. La formación de nuevos brotes y callos en la mayoría de las combinaciones de reguladores de crecimiento se observó en un período de 45 días. El mayor porcentaje de proliferación de brotes, formación de callos y presencia de brotes adventicios se obtuvo en medio Gamborg (B5) suplementado con 5.0 mg/l 6-bencil-aminopurina y 3.0 mg/l de ácido indol-3-butírico. ii. La evaluación de la fidelidad genética de los explantes obtenidos con distintas combinaciones de reguladores de crecimiento vegetal y diversos subcultivos. Se realizó el seguimiento a los explantes obtenidos de la fase anterior, determinando el índice de multiplicación y analizando la fidelidad genética de los tejidos obtenidos por las dos vías regenerativas: brotación directa y regeneración de brotes a partir de callos. Este análisis se realizó por amplificación mediante PCR de las secuencias ubicadas entre microsatélites-ISSR (Inter simple sequence repeat). El medio Gamborg (B5) con 3.0 mg/l de AIB y 5.0 mg/l de BAP usado como medio de inducción en la primera etapa de cultivo generó el mayor índice de proliferación (11.5). Un total de 13 marcadores ISSR fueron analizados, 6 de éstos fueron polimórficos. El mayor porcentaje de variación somaclonal fue inducido en presencia de 1.0 mg/l 2,4-D combinado con 0.2 mg/l Kin con un 1.8% en el segundo sub-cultivo de regeneración, la cual incrementó a 3.6% en el tercer sub-cultivo. Todas las combinaciones con presencia de 2,4-D produjeron la formación de callos y presentaron variación genética. Por su parte la fidelidad genética se mantuvo en los sistemas de propagación directa a través de la formación de brotes a partir de meristemos preformados. iii. El establecimiento de protocolos de conservación in vitro y crioconservación de segmentos nodales y yemas. Para la conservación limitando el crecimiento, se cultivaron segmentos nodales en los medios MS y B5 en tres concentraciones de sus componentes (25, 50 y 100%); y en medio B5 más agentes osmóticos como el manitol, sorbitol y sacarosa en diferentes concentraciones (2, 4 y 8%); los cultivos se mantuvieron por 12 meses sin subcultivos. Para el establecimiento de protocolos para la crioconservación (paralización del metabolismo) se usaron yemas axilares y apicales a las cuales se les aplicaron los métodos de encapsulación-deshidratación y vitrificación. La efectividad de los protocolos usados se determinó en función de la sobrevivencia, reducción del crecimiento y regeneración. Los resultados obtenidos en este apartado reflejan que un crecimiento limitado puede mantener tejidos durante 12 meses de almacenamiento, usando medio B5 más manitol entre 2 y 8%. En los protocolos de crioconservación, se obtuvo el mayor porcentaje de recuperación tras la congelación en NL en el tratamiento control seguido por el método crioprotector de encapsulación-deshidratación. Este trabajo brinda alternativas para la propagación de C. officinalis bajo condiciones in vitro, partiendo de material vegetal con alta diversidad genética. El material propagado puede ser fuente de germoplasma para la recuperación y reforzamiento de las poblaciones naturales así como una alternativa de producción para las comunidades locales debido a la demanda actual de corteza de la zona de origen para la elaboración de agua tónica. ABSTRACT Cinchona officinalis (Rubiaceae) is endemic to the Loja Valley, located in the southern area of Ecuador. The importance of this plant as medical and ecological resource is so great that it has been designated as the national flower and is an icon of the southern region for its contribution to the world pharmacopoeia. Between XVII-XIX centuries its population suffered great reduction due to massive harvesting of the bark to cure malaria. Although extraction activity generated large revenues to the Spanish Crown and the southern region of Ecuador, this was not ecologically sustainable, causing the disappearance of the species in many areas of the province, because during that time alternatives to prevent extinction and recover natural populations were not taken in account. Currently the extraction and consumption of bark in the area of origin is almost absent, but this species faces new threats. Deforestation due to infrastructure development, the practice of farming and ranching, and the effects of climate change had led to the fragmentation of ecosystems during the recent years. Most of the forests of southern Ecuador have become isolated patches, including those where C. officinalis is diffused. The lack of suitable habitat is today the main threat for the species. The species has a high capacity for regeneration and produces seeds throughout the year, but the germination rate is low and the growth is slow. In addition, the species requires the association with other plant species to develop. All these factors had limited its distribution to small isolated patches. The natural recovery of populations is essential to face this problem. Several studies and previous efforts had been made at local level: i. Identification of current and potential distribution; ii. Phenology determination. iii. Environmental education programs, iv. Molecular analisis to determine the genetic diversity. v. Testing of vegetative propagation; and other actions of cultural nature. Despite these efforts, the state of conservation and management of natural populations has not improved significantly. Implementation of integrated in situ and ex situ conservation strategies for the recovery and permanence of long-term natural populations is still needed. This work aims to provide alternatives for in vitro culture of tissue of Cinchona officinalis focused on mass propagation from seeds, genetic fidelity analysis and tissue conservation alternatives. The specific aims are: i. Analyze the process of germination and proliferation in vitro. ii. To evaluate the genetic stability of the explants cultured in vitro by ISSR markers. iii. Establish protocols for in vitro conservation by limiting growth and cryopreservation of nodal segments and buds. The most significant results of this research were: i. The development of efficient protocols to improve germination rates and proliferation of buds in explants cultured in vitro. To study the effect of phenols on germination, the total phenolic content and percentage germination was measured in C. officinalis and in a control species, C. pubescens, for comparison. The content of phenolic compounds in C. officinalis seeds is higher than in C. pubescens. These phenols can be removed with hydrogen peroxide or water washes to stimulate germination. To analyze the regeneration, we used nodal explants from seedlings germinated in vitro on Gamborg medium (1968) supplemented with different combinations of growth regulators (auxins and cytokinins) to induce proliferation. The formation of new shoots and calluses was observed within a period of 45 days in most combinations of growth regulators. The highest percentage of shoot proliferation, callus formation and adventitious buds were obtained in B5 medium supplemented with 5.0 mg/l 6-benzyl-aminopurine and 3.0 mg/l indole-3-butyric acid. ii. Evaluating genetic fidelity explants obtained with various combinations of plant growth regulators and different subcultures. The genetic fidelity was analyzed in tissues obtained by the two regenerative pathways: direct sprouting and shoot regeneration from callus. This analysis was performed by PCR amplification of the sequences located between microsatellite-ISSR (Inter Simple Sequence Repeat). Among a total of 13 ISSR markers analyzed, 6 were polymorphic. The highest percentage of somaclonal variation was induced in the presence of 1.0 mg/l 2,4-D combined with 0.2 mg/l Kin with 1.8% in the second round of regeneration, and increased to 3.6% in the third round. The presence of 2,4-D induced genetic variation in all the combinations of growth regulators. Meanwhile genetic fidelity remained systems propagation through direct shoot formation from meristems preformed. iii. Establishing conservation protocols in vitro and cryoconservation of nodal segments and buds. For medium-term conservation (limited growth) nodal segments were cultured in MS and B5 media at three concentrations (25, 50 and 100%); we tested B5 medium with different concentrations of osmotic agents such as mannitol, sorbitol and sucrose (2, 4 and 8%); cultures were maintained for 12 months with regular subculturing. To establish protocols for cryoconservation (cessation of metabolism) different methods of encapsulation-dehydration and vitrification were applied to axillary and apical buds. The effectiveness of the used protocols is determined based on the survival, growth and regeneration success. The results show that these tissues can be maintained in storage for 12 months, using B5 medium plus mannitol between 2 and 8%. The cryoconservation protocol with highest percentage of recovery was obtained by contral treatment, followed by freezing in NL with encapsulation-dehydration method. This work provides alternatives for the propagation in vitro of C. officinalis, starting from plant material with high genetic diversity. The obtained material represents a source of germplasm to support the recovery and strengthening of natural populations as well as a creation of alternative sources for local communities due to the current demand of bark for the preparation of tonic water.

Desarrollo de frameworks con .NET

La expansión experimentada por la informática, las nuevas tecnologías e internet en los últimos años, no solo viene dada por la evolución del hardware subyacente, sino por la evolución del desarrollo de software y del crecimiento del número de desarrolladores. Este incremento ha hecho evolucionar el software de unos sistemas de gestión basados en ficheros, prácticamente sin interfaz gráfico y de unos pocos miles de líneas a grandes sistemas distribuidos multiplataforma. El desarrollo de estos grandes sistemas, requiere gran cantidad de personas involucradas en el desarrollo, y que las herramientas de desarrollo hayan crecido también para facilitar su análisis, diseño, codificación, pruebas, implantación y mantenimiento. La base de estas herramientas software las proveen las propias plataformas de desarrollo, pero la experiencia de los desarrolladores puede aportar un sinfín de utilidades y de técnicas que agilicen los desarrollos y cumplan los requisitos del software en base a la reutilización de soluciones lo suficientemente probadas y optimizadas. Dichas herramientas se agrupan ordenadamente, creando así frameworks personalizados, con herramientas de todo tipo, clases, controles, interfaces, patrones de diseño, de tal manera que se dan soluciones personalizadas a un amplio número de problemas para emplearlas cuantas veces se quiera, bien marcando directrices de desarrollo mediante el uso de patrones, bien con la encapsulación de complejidades de tal modo que los desarrolladores ya dispongan de componentes que asuman cierta lógica o cierta complejidad aliviando así la fase de construcción. En este trabajo se abordan temas sobre las tecnologías base y plataformas de desarrollo para poder acometer la creación de un framework personalizado, necesidades a evaluar antes de acometerlo, y técnicas a emplear para la consecución del mismo, orientadas a la documentación, mantenimiento y extensión del framework. La exposición teórica consiste en mostrar y evaluar los requisitos para crear un framework, requisitos de la plataforma de desarrollo, y explicar cómo funcionan las grandes plataformas de desarrollo actuales, que elementos los componen y su funcionamiento, así como marcar ciertas pautas de estructuración y nomenclatura que el desarrollo de un framework debe contemplar para su mantenimiento y extensión. En la parte metodológica se ha usado un subconjunto de Métrica V3, ya que para el desarrollo de controles no aplica dicha metodología en su totalidad, pero contempla el catálogo de requisitos, los casos de uso, diagramas de clase, diagramas de secuencia, etc… Aparte de los conceptos teóricos, se presenta un caso práctico con fines didácticos de cómo parametrizar y configurar el desarrollo bajo la plataforma .NET. Dicho caso práctico consiste en la extensión de un control de usuario genérico de la plataforma .NET, de tal modo que se aplican conceptos más allá del hecho de crear funciones como las funcionalidades que puede brindar un API. Conceptos sobre como extender y modificar controles ya existentes, que interactúan por medio de eventos con otros controles, con vistas a que ese nuevo control forme parte de una biblioteca de controles de usuario personalizados ampliamente divulgada. Los controles de usuario son algo que no solo tienen una parte funcional, sino que también tienen una parte visual, y definiciones funcionales distintas de las típicas del software de gestión, puesto que han de controlar eventos, visualizaciones mientras se dan estos eventos y requisitos no funcionales de optimización de rendimiento, etc… Para el caso práctico se toma como herramienta la plataforma de desarrollo .Net Framework, en todas sus versiones, ya que el control a extender es el control ListView y hacerlo editable. Este control está presente en todas las versiones de .NET framework y con un alto grado de reutilización. Esta extensión muestra además como se puede migrar fácilmente este tipo de extensiones sobre todos los frameworks. Los entornos de desarrollo usados son varias versiones de Visual Studio para el mostrar dicha compatibilidad, aunque el desarrollo que acompaña este documento esté realizado sobre Visual Studio 2013. ABSTRACT The expansion in computer science, new technologies and the Internet in recent years, not only is given by the evolution of the underlying hardware, but for the evolution of software development and the growing number of developers. This increase has evolved software from management systems based on files almost without graphical interface and a few thousand of code lines, to large multiplatform distributed systems. The development of these large systems, require lots of people involved in development, and development tools have also grown to facilitate analysis, design, coding, testing, deployment and maintenance. The basis of these software tools are providing by their own development platforms, but the experience of the developers can bring a lot of utilities and techniques to speed up developments and meet the requirements of software reuse based on sufficiently proven solutions and optimized. These tools are grouped neatly, creating in this way custom frameworks, with tools of all types, classes, controls, interfaces, design patterns,… in such a way that they provide customized solutions to a wide range of problems to use them many times as you want to occur, either by dialing development guidelines by using patterns or along with the encapsulation of complexities, so that developers already have components that take some logic or some complexity relieving the construction phase. This paper cover matters based on technologies and development platforms to undertake the creation of a custom framework, needs to evaluate before rush it and techniques to use in order to achieve it, a part from techniques oriented to documentation, maintenance and framework extension. The theoretical explanation consists in to demonstrate and to evaluate the requirements for creating a framework, development platform requirements, and explain how large current development platforms work, which elements compose them and their operation work, as well as mark certain patterns of structure and nomenclature that the development of a framework should include for its maintenance and extension. In the methodological part, a subset of Métrica V3 has been used, because of, for the development of custom controls this methodology does not apply in its entirety, but provides a catalogue of requirements, use cases, class diagrams, sequence diagrams, etc ... Apart from the theoretical concepts, a study case for teaching purposes about how to parameterize and configure the development under the .NET platform is presented. This study case involves the extension of a generic user control of the .NET platform, so that concepts apply beyond the fact of creating functions as the functionalities that can provide an API. Concepts on how to extend and modify existing controls that interact through events with other controls, overlooking that new control as a part of a custom user controls library widely publicized. User controls are something that not only have a functional part, but also have a visual part, and various functional definitions of typical management software, since that they have to control events, visualizations while these events are given and not functional of performance optimization requirements, etc ... For the study case the development platform .Net Framework is taken as tool, in all its versions, considering that control to extend is the ListView control and make it editable. This control is present in all versions of .NET framework and with a high degree of reuse. This extension also shows how you can easily migrate these extensions on all frameworks. The used development environments are several versions of Visual Studio to show that compatibility, although the development that accompanies this document is done on Visual Studio 2013.

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

Self-passivating tungsten based alloys will provide a major safety advantage compared to pure tungsten when used as first wall armor of future fusion reactors, due to the formation of a protective oxide layer which prevents the formation of volatile and radioactive WO3 in case of a loss of coolant accident with simultaneous air ingress. Bulk WCr10Ti2 alloys were manufactured by two different powder metallurgical routes: (1) mechanical alloying (MA) followed by hot isostatic pressing (HIP) of metallic capsules, and (2) MA, compaction, pressureless sintering in H2 and subsequent HIPing without encapsulation. Both routes resulted in fully dense materials with homogeneous microstructure and grain sizes of 300 nm and 1 μm, respectively. The content of impurities remained unchanged after HIP, but it increased after sintering due to binder residue. It was not possible to produce large samples by route (2) due to difficulties in the uniaxial compaction stage. Flexural strength and fracture toughness measured on samples produced by route (1) revealed a ductile-to-brittle-transition temperature (DBTT) of about 950 °C. The strength increased from room temperature to 800 °C, decreasing significantly in the plastic region. An increase of fracture toughness is observed around the DBTT.

GroEL-GroES-mediated protein folding requires an intact central cavity

The chaperonin GroEL is an oligomeric double ring structure that, together with the cochaperonin GroES, assists protein folding. Biochemical analyses indicate that folding occurs in a cis ternary complex in which substrate is sequestered within the GroEL central cavity underneath GroES. Recently, however, studies of GroEL “minichaperones” containing only the apical substrate binding subdomain have questioned the functional importance of substrate encapsulation within GroEL-GroES complexes. Minichaperones were reported to assist folding despite the fact that they are monomeric and therefore cannot form a central cavity. Here we compare directly the folding activity of minichaperones with that of the full GroEL-GroES system. In agreement with earlier studies, minichaperones assist folding of some proteins. However, this effect is observed only under conditions where substantial spontaneous folding is also observed and is indistinguishable from that resulting from addition of the nonchaperone protein α-casein. By contrast, the full GroE system efficiently promotes folding of several substrates under conditions where essentially no spontaneous folding is observed. These data argue that the full GroEL folding activity requires the intact GroEL-GroES complex, and in light of previous studies, underscore the importance of substrate encapsulation for providing a folding environment distinct from the bulk solution.

Polycaps: Reversibly formed polymeric capsules

Described are assemblies consisting of polymeric capsules, “polycaps,” formed from two calix[4]arene tetraureas covalently connected at their lower rims. In these structures self-assembly leads to reversibly formed capsule sites along a chain, reminiscent of beads on a string. Their dynamic behavior is characterized by 1H NMR spectroscopy through encapsulation of guest species, reversible polymerization, and the formation of sharply defined hybrid capsules.

Developmental signal transduction pathways uncovered by genetic suppressors

We have found conditions for saturation mutagenesis by restriction enzyme mediated integration that result in plasmid tagging of disrupted genes. Using this method we selected for mutations in genes that act at checkpoints downstream of the intercellular signaling system that controls encapsulation in Dictyostelium discoideum. One of these genes, mkcA, is a member of the mitogen-activating protein kinase cascade family while the other, regA, is a novel bipartite gene homologous to response regulators in one part and to cyclic nucleotide phosphodiesterases in the other part. Disruption of either of these genes results in partial suppression of the block to spore formation resulting from the loss of the prestalk genes, tagB and tagC. The products of the tag genes have conserved domains of serine proteases attached to ATP-driven transporters, suggesting that they process and export peptide signals. Together, these genes outline an intercellular communication system that coordinates organismal shape with cellular differentiation during development.

High-resolution NMR of encapsulated proteins dissolved in low-viscosity fluids

The majority of known proteins are too large to be comprehensively examined by solution NMR methods, primarily because they tumble too slowly in solution. Here we introduce an approach to making the NMR relaxation properties of large proteins amenable to modern solution NMR techniques. The encapsulation of a protein in a reverse micelle dissolved in a low-viscosity fluid allows it to tumble as fast as a much smaller protein. The approach is demonstrated and validated with the protein ubiquitin encapsulated in reverse micelles prepared in a variety of alkane solvents.

Grafts of adenosine-releasing cells suppress seizures in kindling epilepsy

Adenosine is an inhibitor of neuronal activity in the brain. The local release of adenosine from grafted cells was evaluated as an ex vivo gene therapy approach to suppress synchronous discharges and epileptic seizures. Fibroblasts were engineered to release adenosine by inactivating the adenosine-metabolizing enzymes adenosine kinase and adenosine deaminase. After encapsulation into semipermeable polymers, the cells were grafted into the brain ventricles of electrically kindled rats, a model of partial epilepsy. Grafted rats provided a nearly complete protection from behavioral seizures and a near-complete suppression of afterdischarges in electroencephalogram recordings, whereas the full tonic–clonic convulsions in control rats remained unaltered. Thus, the local release of adenosine resulting in adenosine concentrations <25 nM at the site of action is sufficient to suppress seizure activity and, therefore, provides a potential therapeutic principle for the treatment of drug-resistant partial epilepsies.

Rapid preparation of giant unilamellar vesicles.

We report here a rapid evaporation method that produces in high yield giant unilamellar vesicles up to 50 microns in diameter. The vesicles are obtained after only 2 min and can be prepared from different phospholipids, including L-alpha-phosphatidylcholine (lecithin), dipalmitoleoyl L-alpha-phosphatidylcholine, and beta-arachidonoyl gamma-palmitoyl L-alpha-phosphatidylcholine. Vesicles can be produced in distilled water and in Hepes, phosphate, and borate buffers in the pH range of 7.0 to 11.5 with ionic strengths up to 50 mM. The short preparation time allows encapsulation of labile molecular targets or enzymes with high catalytic activities. Cell-sized proteoliposomes have been prepared in which gamma-glutamyltransferase (EC 2.3.2.2) was functionally incorporated into the membrane wall.

The open reading frame of bamboo mosaic potexvirus satellite RNA is not essential for its replication and can be replaced with a bacterial gene.

A satellite RNA of 836 nt depends on the bamboo mosaic potexvirus (BaMV) for its replication and encapsulation. The BaMV satellite RNA (satBaMV) contains a single open reading frame encoding a 20-kDa nonstructural protein. A full-length infectious cDNA clone has been generated downstream of the T7 RNA polymerase promoter. To investigate the role of the 20-kDa protein encoded by satBaMV, satBaMV transcripts containing mutations in the open reading frame were tested for their ability to replicate in barley protoplasts and in Chenopodium quinoa using BaMV RNA as a helper genome. Unlike other large satellite RNAs, mutants in the open reading frame did not block their replication, suggesting that the 20-kDa protein is not essential for satBaMV replication. Precise replacement of the open reading frame with sequences encoding chloramphenicol acetyltransferase resulted in high level expression of chloramphenicol acetyltransferase in infected C. quinoa, indicating that satBaMV is potentially useful as a satellite-based expression vector.

Delivery of antisense oligodeoxyribonucleotides against the human epidermal growth factor receptor into cultured KB cells with liposomes conjugated to folate via polyethylene glycol.

Antisense oligodeoxyribonucleotides targeted to the epidermal growth factor (EGF) receptor were encapsulated into liposomes linked to folate via a polyethylene glycol spacer (folate-PEG-liposomes) and efficiently delivered into cultured KB cells via folate receptor-mediated endocytosis. The oligonucleotides were a phosphodiester 15-mer antisense to the EGF receptor (EGFR) gene stop codon (AEGFR2), the same sequence with three phosphorothioate linkages at each terminus (AEGFR2S), a randomized 15-mer control of similar base composition to AEGFR2 (RC15), a 14-mer control derived from a symmetrized Escherichia coli lac operator (LACM), and the 5'-fluorescein-labeled homologs of several of the above. Cellular uptake of AEGFR2 encapsulated in folate-PEG-liposomes was nine times higher than AEGFR2 encapsulated in nontargeted liposomes and 16 times higher than unencapsulated AEGFR2. Treatment of KB cells with AEGFR2 in folate-PEG-liposomes resulted in growth inhibition and significant morphological changes. Curiously, AEGFR2 and AEGFR2S encapsulated in folate-PEG-liposomes exhibited virtually identical growth inhibitory effects, reducing KB cell proliferation by > 90% 48 hr after the cells were treated for 4 hr with 3 microM oligonucleotide. Free AEGFR2 caused almost no growth inhibition, whereas free AEGFR2S was only one-fifth as potent as the folate-PEG-liposome-encapsulated oligonucleotide. Growth inhibition of the oligonucleotide-treated cells was probably due to reduced EGFR expression because indirect immunofluorescence staining of the cells with a monoclonal antibody against the EGFR showed an almost quantitative reduction of the EGFR in cells treated with folate-PEG-liposome-entrapped AEGFR2. These results suggest that antisense oligonucleotide encapsulation in folate-PEG-liposomes promise efficient and tumor-specific delivery and that phosphorothioate oligonucleotides appear to offer no major advantage over native phosphodiester DNA when delivered by this route.

Encapsulação de colecalciferol (vitamina D3) por spray chilling

A indústria de alimentos está constantemente desenvolvendo produtos que fornecem, além de nutrientes, benefícios adicionais à saúde, tais como os enriquecidos com vitaminas. A vitamina D3 (colecalciferol) é sintetizada na pele durante a exposição da luz solar, controla a homeostase de cálcio e fósforo, metabolismo ósseo, pressão arterial e reabsorção renal de cálcio. O processo de microencapsulação vem sendo bastante aplicado em alimentos e um dos objetivos principais é o controle da liberação do agente ativo no momento e local desejado. A tecnologia de spray chilling é interessante para a microencapsulação de vitaminas lipossolúveis. O objetivo deste trabalho foi microencapsular vitamina D3, utilizando o método de spray chilling para a produção das micropartículas lipídicas sólidas (MLS). Para produção das MLS utilizou-se gordura vegetal com ponto de fusão em torno de 48 °C como carreador. Três tratamentos foram estabelecidos: sem aditivos (T1), com adição de 1% de cera de abelha (T2) e com 1% de lecitina de soja (T3). As micropartículas foram caracterizadas quanto à morfologia por microscopia eletrônica de varredura, tamanho médio por difração a laser, espectroscopia no infravermelho por transformada de Fourier (FTIR) e foi analisada a estabilidade da vitamina D3 durante o armazenamento a 10 e 25 °C, por meio de quantificações periódicas em cromatografia líquida de alta eficiência (CLAE). As micropartículas obtidas foram esféricas, semelhantes morfologicamente e com distribuição monocaudal de partículas. O tamanho médio das partículas variou em função dos seus ingredientes, sendo que as micropartículas produzidas apenas com vitamina e gordura foram menores em relação às demais (83,0% < 100 µm). A espectroscopia na região do infravermelho (FTIR) demonstrou que não ocorreu interação entre os ingredientes. A estabilidade da vitamina D3 encapsulada foi satisfatória ao longo de 65 dias com valores superiores a 87% para os três tratamentos e a temperatura apresentou influência na estabilidade. As MLS produzidas com cera apresentaram melhores resultados de estabilidade de vitamina D3 com valores de 90,18 ± 2,23 % após 65 dias de estocagem. Esses resultados são promissores e demostram a viabilidade da técnica de spray chilling na produção de MLS carregadas de vitamina D3, possibilitando uma futura aplicação em alimentos.

Estudo e desenvolvimento de lipossomas com potencial para aplicação em base cosmética

A acne vulgar é uma das doenças cutâneas mais comuns, apresentando como um de seus fatores fisiopatológicos primários a colonização pelo microrganismo Propionibacterium acnes. Atualmente, têm-se buscado terapias alternativas para o combate ao P. acnes, destacando-se alguns ácidos graxos, como o ácido laúrico (LA). O LA é uma molécula pouco solúvel em água, sendo possível sua incorporação em lipossomas. Os lipossomas apresentam capacidade de encapsulação/ liberação de ativos e impedem a desidratação da pele, tornando-se ingredientes inovadores na área de cosméticos. Foram preparados lipossomas de dipalmitoilfosfatidilcolina (DPPC) contendo diferentes concentrações de LA, que variaram de 0 a 50% da concentração total em mol, em quatro pHs: 9,0, 7,4, 5,0 e 3,0. Nestes pHs o estado de protonação do LA muda variando de 0 a -1. Os lipossomas foram extrusados por filtros com poros de 100 nm de diâmetro visando à obtenção de vesículas unilamelares grandes (LUV). As LUV foram caracterizadas quanto a sua estabilidade em condições de prateleira, temperatura de transição de fase da bicamada, encapsulamento no interior aquoso, liberação do LA, difusão das vesículas na pele e seus aspectos morfológicos foram caracterizados por espalhamento de raios-X a baixo ângulo (SAXS) e crio-microscopia eletrônica de transmissão. Estudos de estabilidade mostraram que independentemente da concentração de LA, as formulações são mais estáveis em pHs mais altos, quando LA está em sua maioria na forma de laurato. Os experimentos de DSC revelaram que em pHs 3,0 e 5,0 e concentrações maiores de LA, a interação deste ácido graxo com as bicamadas é favorecida, havendo um aumento da temperatura de transição de fase (Tm) e diminuição da cooperatividade. Análises de taxa de incorporação de sondas hidrofílicas confirmaram a presença de um compartimento aquoso interno para as vesículas de DPPC:LA. O LA conseguiu permear a pele no período avaliado e pouco LA foi liberado das vesículas em condições de temperatura ambiente. A morfologia das LUV se mostrou bem diferente da esperada e se observaram vesículas com mais de uma bicamada e outros formatos que não o esférico. Estes resultados podem auxiliar na otimização das condições para uma formulação que poderá ser usada no tratamento da acne, aumentando a eficácia do LA no sítio alvo.