Birth, Development and Progressive Institutionalization of the Ombudsman in the Russian Legal and Political System

One of the current trends in governance and legal development in Russia is aimed at establishing a modern, efficient and internationally harmonised system of safeguards of human rights and civil liberties. A fairly recent addition to this system has been the institution of ombudsman as a public authority specialised in promoting and protecting human rights and civil liberties. The introduction of this institution as well as its formalisation at the constitutional and legislative levels has been increasingly relevant and important, as it raises the dealings between the state and the individual to a new level. As an independent public institution resolving conflicts between citizens and government authorities, the ombudsman makes steps, within the scope of his jurisdiction, to restitute individual rights, and helps to enhance the reputation of government. The present work describes and assesses the birth, development and institutionalization process of the Ombudsman Office in the Russian Federation, at federal and regional levels, with a particular emphasis on the role of international references and cooperation for institution building. Ombudsmen have done a magnificent job in demonstrating value with the resolution of individual and systemic complaints; subsequent improvements to government; and economic savings by mitigating litigation costs.

Development and testing of the atlas ibl rod pre production boards

Il lavoro di questa tesi riguarda principalmente la progettazione, simulazione e test di laboratorio di tre versioni successive di schede VME, chiamate Read Out Driver (ROD), che sono state fabbricate per l'upgrade del 2014 dell'esperimento ATLAS Insertable B-Layer (IBL) al CERN. IBL è un nuovo layer che diverrà parte del Pixel Detector di ATLAS. Questa tesi si compone di una panoramica descrittiva dell'esperimento ATLAS in generale per poi concentrarsi sulla descrizione del layer specifico IBL. Inoltre tratta in dettaglio aspetti fisici e tecnici: specifiche di progetto, percorso realizzativo delle schede e test conseguenti. Le schede sono state dapprima prodotte in due prototipi per testare le prestazioni del sistema. Queste sono state fabbricate al fine di valutare le caratteristiche e prestazioni complessive del sistema di readout. Un secondo lotto di produzione, composto di cinque schede, è stato orientato alla correzione fine delle criticità emerse dai test del primo lotto. Un'indagine fine e approfondita del sistema ha messo a punto le schede per la fabbricazione di un terzo lotto di altre cinque schede. Attualmente la produzione è finita e complessivamente sono state realizzate 20 schede definitive che sono in fase di test. La produzione sarà validata prossimamente e le 20 schede verranno consegnate al CERN per essere inserite nel sistema di acquisizione dati del rivelatore. Al momento, il Dipartimento di Fisica ed Astronomia dell'Università di Bologna è coinvolto in un esperimento a pixel solamente attravers IBL descritto in questa tesi. In conclusione, il lavoro di tesi è stato prevalentemente focalizzato sui test delle schede e sul progetto del firmware necessario per la calibrazione e per la presa dati del rivelatore.

Design and development of the new composite-material mainplane of the Dallara T12 race car

Abstract (US) Composite material components design and production techniques are discussed in the present graduation paper. In particular, this paper covers the design process and the production process of a carbon-fiber composite material component for a high performance car, more specifically, the Dallara T12 race car. This graduation paper is split in two. After a brief introduction on existing composite materials (their origins and applications), the first part of the present paper covers the main theoretical concepts behind the design of composite material components: particular focus will be given to carbon-fiber composites. The second part of the present paper covers the whole design and production process that the candidate carried out to create the new front mainplane of the Dallara T12 race car. This graduation paper is the result of a six-months-long internship that the candidate conducted as Design Office Trainee inside Dallara Automobili S.p.A. Abstract (ITA) La presente tesi di laurea discute le metodologie progettuali e produttive legate alla realizzazione di un componente in materiale composito. Nello specifico, viene discussa la progettazione e la produzione di un componente in fibra di carbonio destinato ad una vettura da competizione. La vettura in esame è la Dallara T12. Il lavoro è diviso in due parti. Nella prima parte, dopo una breve introduzione sull’origine e le tipologie di materiali compositi esistenti, vengono trattati i concetti teorici fondamentali su cui si basa la progettazione di generici componenti in materiale composito, con particolare riguardo ai materiali in fibra di carbonio. Nella seconda parte viene discusso tutto il processo produttivo che il candidato ha portato a termine per realizzare il nuovo alettone anteriore della Dallara T12. La presente tesi di laurea è il risultato del lavoro di progettazione che il candidato ha svolto presso l’Ufficio Tecnico di Dallara Automobili S.p.A. nel corso di un tirocinio formativo di sei mesi.

Brand formative design - development and assessment of product design from a future, brand and consumer perspective

With this dissertation research we investigate intersections between design and marketing and in this respect, which factors do contribute that a product design becomes brand formative. We have developed a Brand Formative Design (BFD) framework, which investigates individual design features in a holistic, comparable, brand relevant, and consumer specific context. We discuss what kinds of characteristics contribute to BFD but also illuminate how they should be applied and examine: rnA holistic framework leading to Brand Formative Design. Identification and assessment of BFD Drivers. The dissection of products into three Distinctive Design Levels. The detection of surprising design preferences. The appropriate degree of scheme deviation with evolutionary design. Simulated BFD development processes with three different products and the integration of consumers. Future oriented objectification, comparability and assessment of design. Recommendations for the management of design in a brand specific context. Design is a product feature, which contributes significantly to the success of products. However, the development of new design contains challenges. Design can hardly be objectified; many people have an opinion concerning the attractiveness of new products but cannot formulate their future preferences. Product design is widely developed based on intuition, which can be difficult for the management of design. Here the concept of Brand Formative Design can provide a framework which contributes to structure, objectify, develop and assess new evolutionary design in brand and future relevant contexts, but also integrates consumers and their preferences without restricting creativity too much.

Firmware development and testing for L1/L2 IBL upgrade

Il lavoro di questa tesi riguarda principalmente l'upgrade, la simulazione e il test di schede VME chiamate ReadOut Driver (ROD), che sono parte della catena di elaborazione ed acquisizione dati di IBL (Insertable B-Layer). IBL è il nuovo componente del Pixel Detector dell'esperimento ATLAS al Cern che è stato inserito nel detector durante lo shut down di LHC; fino al 2012 infatti il Pixel Detector era costituito da tre layer, chiamati (partendo dal più interno): Barrel Layer 0, Layer 1 e Layer 2. Tuttavia, l'aumento di luminosità di LHC, l'invecchiamento dei pixel e la richiesta di avere misure sempre più precise, portarono alla necessità di migliorare il rivelatore. Così, a partire dall'inizio del 2013, IBL (che fino a quel momento era stato un progetto sviluppato e finanziato separatamente dal Pixel Detector) è diventato parte del Pixel Detector di ATLAS ed è stato installato tra la beam-pipe e il layer B0. Questa tesi fornirà innanzitutto una panoramica generale dell'esperimento ATLAS al CERN, includendo aspetti sia fisici sia tecnici, poi tratterà in dettaglio le varie parti del rivelatore, con particolare attenzione su Insertable B-Layer. Su quest'ultimo punto la tesi si focalizzerà sui motivi che ne hanno portato alla costruzione, sugli aspetti di design, sulle tecnologie utilizzate (volte a rendere nel miglior modo possibile compatibili IBL e il resto del Pixel Detector) e sulle scelte di sviluppo e fabbricazione. La tesi tratterà poi la catena di read-out dei dati, descrivendo le tecniche di interfacciamento con i chip di front-end, ed in particolare si concentrerà sul lavoro svolto per l'upgrade e lo sviluppo delle schede ReadOut Drivers (ROD) introducendo le migliorie da me apportate, volte a eliminare eventuali difetti, migliorare le prestazioni ed a predisporre il sistema ad una analisi prestazionale del rivelatore. Allo stato attuale le schede sono state prodotte e montate e sono già parte del sistema di acquisizione dati del Pixel Detector di ATLAS, ma il firmware è in continuo aggiornamento. Il mio lavoro si è principalmente focalizzato sul debugging e il miglioramento delle schede ROD; in particolare ho aggiunto due features: - programmazione parallela delle FPGA} delle ROD via VME. IBL richiede l'utilizzo di 15 schede ROD e programmandole tutte insieme (invece che una alla volta) porta ad un sensibile guadagno nei tempi di programmazione. Questo è utile soprattutto in fase di test; - reset del Phase-Locked Loop (PLL)} tramite VME. Il PLL è un chip presente nelle ROD che distribuisce il clock a tutte le componenti della scheda. Avere la possibilità di resettare questo chip da remoto permette di risolvere problemi di sincronizzazione. Le ReadOut Driver saranno inoltre utilizzate da più layer del Pixel Detector. Infatti oltre ad IBL anche i dati provenienti dai layer 1 e 2 dei sensori a pixel dell’esperimento ATLAS verranno acquisiti sfruttando la catena hardware progettata, realizzata e testata a Bologna.

Development of a fluorescent-based single liposome assay for studying calcium transporter LMCA1

The morphological and functional unit of all the living organisms is the cell. The transmembrane proteins, localized in the plasma membrane of cells, play a key role in the survival of the cells themselves. These proteins perform a variety of different tasks, for example the control of the homeostasis. In order to control the homeostasis, these proteins have to regulate the concentration of chemical elements, like ions, inside and outside the cell. These regulations are fundamental for the survival of the cell and to understand them we need to understand how transmembrane proteins work. Two of the most important categories of transmembrane proteins are ion channels and transporter proteins. The ion channels have been depth studied at the single molecule level since late 1970s with the development of patch-clamp technique. It is not possible to apply this technique to study the transporter proteins so a new technique is under development in order to investigate the behavior of transporter proteins at the single molecule level. This thesis describes the development of a nanoscale single liposome assay for functional studies of transporter proteins based on quantitative fluorescence microscopy in a highly-parallel manner and in real time. The transporter of interest is the prokaryotic transporter Listeria Monocytogenes Ca2+-ATPase1 (LMCA1), a structural analogue of the eukaryotic calcium pumps SERCA and PMCA. This technique will allow the characterization of LMCA1 functionality at the single molecule level. Three systematically characterized fluorescent sensors were tested at the single liposome scale in order to investigate if their properties are suitable to study the function of the transporter of interest. Further studies will be needed in order to characterize the selected calcium sensor and pH sensor both implemented together in single liposomes and in presence of the reconstituted protein LMCA1.

Strength development of single beech wood veneers considering different climate conditions

La tesi di laurea è stata svolta presso l’Università di Scienze Applicate di Rosenheim, in Germania; il progetto di ricerca si basa sulla tecnica di rinforzo conosciuta come “Soil Nailing”, che consiste nella costruzione di un’opera di sostegno nella realizzazione di pareti di scavo o nel consolidamento di versanti instabili. L’obiettivo principale dell’elaborato sarà quello di valutare la fattibilità dell’impiego di tubi fabbricati con legno di faggio, in sostituzione dei chiodi d’acciaio comunemente utilizzati; la scelta di questo tipo di legno è dettata dalla larga disponibilità presente in Germania. La sollecitazione principale su tali tubi sarà di trazione parallela alla fibratura, tramite test sperimentali è stato possibile valutare tale resistenza nelle diverse condizioni in cui si verrà a trovare il tubo dopo l’installazione nel terreno. A tal proposito è necessario specificare che, l’indagine per risalire all’influenza che le condizioni ambientali esercitano sull’elemento, verrà condotta su provini costituiti da un singolo strato di legno; in tal modo si può apprezzare l’influenza direttamente sull’elemento base e poi risalire al comportamento globale. I dati ottenuti dall’indagine sperimentale sono stati elaborati tramite la teoria di Weibull, largamente utilizzata in tecnologia dei materiali per quanto riguarda materiali fragili come il legno; tali distribuzioni hanno permesso la determinazione della resistenza caratteristica dei provini per ogni condizione ambientale d’interesse. Per quanto riguarda la valutazione della fattibilità dell’uso di tubi in legno in questa tecnica di consolidamento, è stato eseguito il dimensionamento del tubo, utilizzando i dati a disposizione ottenuti dall’indagine sperimentale eseguita; ed infine sono state eseguite le verifiche di stabilità dell’intervento.

Monitoring and Assessment of Desertification and Land Degradation: Knowledge Management, Institutions and Economics: White Paper of the DSD Working Group 3

The White Paper is a review of leading scientific knowledge on the role of knowledge management, institutions and economics in monitoring and assessment of land degradation and desertification. It provides key recommendations for more effective policies and actions for combating desertification both withn the UNCCD and beyond. This White Paper is the result of an international collaboration and consultation led jointly by the Association of DesertNet International and the United Nations University - Institute for Water, Environment and Health (UNU-INWEH), of the Dryland Science for Development Consortium (DSD). The findings were presented at the First UNCCD Scientific Conference held during the COP-9 in Buenos Aires, 2009.

Making research relevant to policy-makers, development actors, and local communities: NCCR North-South report on effectiveness of research for development

Bridging the gap between research and policy is of growing importance in international development. The National Centre of Competence in Research (NCCR) North-South has rich experience in collaborating beyond academic boundaries to make their research relevant to various societal actors. This publication is the first to provide an overview of the effectiveness of NCCR North-South researchers’ efforts to interact with policy, practice, and local communities with a view to effecting a change in practices. A systematic assessment of researchers’ interactions with non-academic partners is presented, based on principles of monitoring and evaluation. On this basis, tools for collective learning and widespread adaptation are proposed. The report shows with what types of societal actors NCCR North-South researchers collaborate and analyses examples of how researchers conduct dialogue beyond academic boundaries, leading to specific outcomes. It also explains the frame conditions considered decisive for successful and sustainable policy dialogue and concludes with recommendations about how the NCCR North-South can increase the effectiveness of its research for development. The publication is a valuable source of inspiration for those interested in better understanding how to generate the multiple benefits of making science relevant to society.

Global Change and Sustainable Development: A Synthesis of Regional Experiences from Research Partnerships

Humankind today is challenged by numerous threats brought about by the speed and scope of global change dynamics. A concerted and informed approach to solutions is needed to face the severity and magnitude of current development problems. Generating shared knowledge is a key to addressing global challenges. This requires developing the ability to cross multiple borders wherever radically different understandings of issues such as health and environmental sanitation, governance and conflict, livelihood options and globalisation, and natural resources and development exist. Global Change and Sustainable Development presents 36 peer-reviewed articles written by interdisciplinary teams of authors who reflected on results of development-oriented research conducted from 2001 to 2008. Scientific activities were – and continue to be – carried out in partnerships involving people and institutions in the global North, South and East, guided by principles of sustainability. The articles seek to inform solutions for mitigating, or adapting to, the negative impacts of global dynamics in the social, political, ecological, institutional and economic spheres.

Sustainable regional development: Reconciling global and local dynamics and stakes in the Swiss Alps

This article explores how global and local dynamics and stakes can be brought together when trying to combine conservation and regional development. For this purpose we analyse a series of studies carried out in the area of the Swiss Alps Jungfrau-Aletsch World Heritage Site (WHS). The approaches used in these studies to analyse the diversity and development of the region included data collection and evaluation of indicators such as population development, number of working places, occupation rates in various economic sectors and commuter balance, as well as interviews with key informants and assessment of existing planning tools. The major challenge of the newly declared World Heritage Region is that it is neither a political or administrative nor a cultural unit but constitutes a completely new type of space that breaks up and crosses traditional boundaries. The studies revealed an economic tertiarisation process and migration of the population from remote areas to regional centres. Tourism was identified as the key economic sector in the region. Regarding regional sustainability, the studies identified a need for quality dialogue and negotiation of interests and stakes. It was shown that in dealing with sustainability at the local level, many key issues cannot be resolved on the ground, as they depend on regional or national decisions, e.g. the conditions for tourism promotion in the region or economic validation of agricultural activity. We conclude from these findings that national or even international factors do not provide a basis for location-specific solutions, as they are often too general, and that the global label does not ensure sustainability in a designated WHS region; this depends entirely on local and regional dynamics.

Making Research Relevant to Development - Experience from the NCCR North-South

Making research relevant to development is a complex, non-linear and often unpredictable process which requires very particular skills and strategies on the part of researchers. The National Centre of Competence in Research (NCCR) North-South provides financial and technical support for researchers so that they can effectively cooperate with policy-makers and practitioners. An analysis of 10 years of experience translating research into development practise in the NCCR North-South revealed the following four strategies as particularly relevant: a) research orientation towards the needs and interests of partners; b) implementation of promising methods and approaches; c) communication and dissemination of research results; and d) careful analysis of the political context through monitoring and learning approaches. The NCCR North-South experience shows that “doing excellent research” is just one piece of the mosaic. It is equally important to join hands with non-academic partners from the very beginning of a research project, in order to develop and test new pathways for sustainable development. Capacity building – in the North and South – enables researchers to do both: To do excellent research and to make it relevant for development.

Things Fall Apart: Dictatorships, Development, and Democracy in Africa

Recent events in Africa provide evidence of the failure of dictatorships to meet the needs of citizens and serve to debunk a number of development theory assumptions: that democratization is culturally determined, that democratization will follow economic development, and that dictatorships tend to produce durable, stable development. Therefore, the attempt to achieve development without democratization is risky and potentially very costly. We argue that dictatorship in Africa serves a function akin to Myrdal's backwash effects, thwarting economic progress in a cumulative and circular way, and that democratization must become a necessary criterion of engagement with African countries.