Children, computer and creativity : usability guidelines for designing a game authoring tool for children

Magdeburg, Univ., Fak. für Informatik, Diss., 2009

Virtual Reality zur Untersuchung neuronaler Prozesse : Entwicklung und Validierung einer adaptiven Hirn-Computer-Schnittstelle zur dynamischen Interaktion mit Virtual Reality Paradigmen

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Computer-aided detection of cerebral aneurysms in angiographies

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Computer-assisted motion compensation and analysis of perfusion ultrasound data

Magdeburg, Univ., Fak. für Informatik, Diss., 2014

Kernspintomographische Untersuchung zur Bedeutung von Rückmeldungen in der Mensch-Computer-Interaktion

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2015

File-based post-processing of DNS results for turbulent flames using MATLAB

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2015

Stridulatory file and calling song of two populations of the tropical bush cricket Eneoptera surinamensis (Orthoptera, Gryllidae, Eneopterinae)

This study characterizes the calling song and ultramorphology of the stridulatory file of two geographically isolated populations of the tropical bush cricket Eneoptera surinamensis (De Geer, 1773) from city of Foz do Iguaçu, state of Paraná, and town of Rio Claro, state of São Paulo, Brazil, distant 1,000 Km from each other. The teeth are shell-shaped, the larger ones are distributed in the medium region of the file, decreasing gradually in size towards the edges. Specimens from Foz do Iguaçu have a file with 82 ± 9.8 teeth, length=1.89 mm ± 0.15 with 43.76 ± 5.94 teeth per mm (n=15). Specimens from Rio Claro present a file with 87 ± 9.81, length=1.96 ± 0.19 mm with 44.52 ± 4.61 teeth per mm (n=15). Statistical differences found between the two populations are not significant. The calling song is an uninterrupted trill that alternates two sets of notes distinct for its temporal features.

Results of computer assisted navigation in Total Knee Arthroplasty (TKA): comparison with the conventional method

The aim of this retrospective study was to compare the clinical and radiographic results after TKA (PFC, DePuy), performed either by computer assisted navigation (CAS, Brainlab, Johnson&Johnson) or by conventional means. Material and methods: Between May and December 2006 we reviewed 36 conventional TKA performed between 2002 and 2003 (group A) and 37 navigated TKA performed between 2005 and 2006 (group B) by the same experienced surgeon. The mean age in group A was 74 years (range 62-90) and 73 (range 58-85) in group B with a similar age distribution. The preoperative mechanical axes in group A ranged from -13° varus to +13° valgus (mean absolute deviation 6.83°, SD 3.86), in group B from -13° to +16° (mean absolute deviation 5.35, SD 4.29). Patients with a previous tibial osteotomy or revision arthroplasty were excluded from the study. Examination was done by an experienced orthopedic resident independent of the surgeon. All patients had pre- and postoperative long standing radiographs. The IKSS and the WOMAC were utilized to determine the clinical outcome. Patient's degree of satisfaction was assessed on a visual analogous scale (VAS). Results: 32 of the 37 navigated TKAs (86,5%) showed a postoperative mechanical axis within the limits of 3 degrees of valgus or varus deviation compared to only 24 (66%) of the 36 standard TKAs. This difference was significant (p = 0.045). The mean absolute deviation from neutral axis was 3.00° (range -5° to +9°, SD: 1.75) in group A in comparison to 1.54° (range -5° to +4°, SD: 1.41) in group B with a highly significant difference (p = 0.000). Furthermore, both groups showed a significant postoperative improvement of their mean IKSS-values (group A: 89 preoperative to 169 postoperative, group B 88 to 176) without a significant difference between the two groups. Neither the WOMAC nor the patient's degree of satisfaction - as assessed by VAS - showed significant differences. Operation time was significantly higher in group B (mean 119.9 min.) than in group A (mean 99.6 min., p <0.000). Conclusion: Our study showed consistent significant improvement of postoperative frontal alignment in TKA by computer assisted navigation (CAS) compared to standard methods, even in the hands of a surgeon well experienced in standard TKA implantation. However, the follow-up time of this study was not long enough to judge differences in clinical outcome. Thus, the relevance of computer navigation for clinical outcome and survival of TKA remains to be proved in long term studies to justify the longer operation time. References 1 Stulberg SD. Clin Orth Rel Res. 2003;(416):177-84. 2 Chauhan SK. JBJS Br. 2004;86(3):372-7. 3 Bäthis H, et al. Orthopäde. 2006;35(10):1056-65.

Distal dendrites of frog motor neurons: a computer-aided electron microscopic study of cobalt-filled cells.

With the aid of the cobalt labelling technique, frog spinal cord motor neuron dendrites of the subpial dendritic plexus have been identified in serial electron micrographs. Computer reconstructions of various lengths (2.5-9.8 micron) of dendritic segments showed the contours of these dendrites to be highly irregular, and to present many thorn-like projections 0.4-1.8 micron long. Number, size and distribution of synaptic contacts were also determined. Almost half of the synapses occurred at the origins of the thorns and these synapses had the largest contact areas. Only 8 out of 54 synapses analysed were found on thorns and these were the smallest. For the total length of reconstructed dendrites there was, on average, one synapse per 1.2 micron, while 4.4% of the total dendritic surface was covered with synaptic contacts. The functional significance of these distal dendrites and their capacity to influence the soma membrane potential is discussed.

Benchmarking therapeutic drug monitoring software: A review of available computer tools

Therapeutic drug monitoring (TDM) aims to optimize treatments by individualizing dosage regimens based on the measurement of blood concentrations. Dosage individualization to maintain concentrations within a target range requires pharmacokinetic and clinical capabilities. Bayesian calculations currently represent the gold standard TDM approach but require computation assistance. In recent decades computer programs have been developed to assist clinicians in this assignment. The aim of this survey was to assess and compare computer tools designed to support TDM clinical activities. The literature and the Internet were searched to identify software. All programs were tested on personal computers. Each program was scored against a standardized grid covering pharmacokinetic relevance, user friendliness, computing aspects, interfacing and storage. A weighting factor was applied to each criterion of the grid to account for its relative importance. To assess the robustness of the software, six representative clinical vignettes were processed through each of them. Altogether, 12 software tools were identified, tested and ranked, representing a comprehensive review of the available software. Numbers of drugs handled by the software vary widely (from two to 180), and eight programs offer users the possibility of adding new drug models based on population pharmacokinetic analyses. Bayesian computation to predict dosage adaptation from blood concentration (a posteriori adjustment) is performed by ten tools, while nine are also able to propose a priori dosage regimens, based only on individual patient covariates such as age, sex and bodyweight. Among those applying Bayesian calculation, MM-USC*PACK© uses the non-parametric approach. The top two programs emerging from this benchmark were MwPharm© and TCIWorks. Most other programs evaluated had good potential while being less sophisticated or less user friendly. Programs vary in complexity and might not fit all healthcare settings. Each software tool must therefore be regarded with respect to the individual needs of hospitals or clinicians. Programs should be easy and fast for routine activities, including for non-experienced users. Computer-assisted TDM is gaining growing interest and should further improve, especially in terms of information system interfacing, user friendliness, data storage capability and report generation.

Computer-assisted placement technique in hip resurfacing arthroplasty: improvement in accuracy?

Freehand positioning of the femoral drill guide is difficult during hip resurfacing and the surgeon is often unsure of the implant position achieved peroperatively. The purpose of this study was to find out whether, by using a navigation system, acetabular and femoral component positioning could be made easier and more precise. Eighteen patients operated on by the same surgeon were matched by sex, age, BMI, diagnosis and ASA score (nine patients with computer assistance, nine with the regular ancillary). Pre-operative planning was done on standard AP and axial radiographs with CT scan views for the computer-assisted operations. The final position of implants was evaluated by the same radiographs for all patients. The follow-up was at least 1 year. No difference between both groups in terms of femoral component position was observed (p > 0.05). There was also no difference in femoral notching. A trend for a better cup position was observed for the navigated hips, especially for cup anteversion. There was no additional operating time for the navigated hips. Hip navigation for resurfacing surgery may allow improved visualisation and hip implant positioning, but its advantage probably will be more obvious with mini-incisions than with regular incision surgery.

Sistema de monitorització Open Source: projecte d'empresa per Computer Technology Catalunya

L’objectiu del projecte consisteix en l’estudi, simulació i implantació d’un conjunt d’aplicacions que permeten tenir un control sobre possibles problemes que puguin succeir a la nostra xarxa. Aquest projecte és la solució als problemes de detecció d’errors en el funcionament de les infraestructures de networking de les que disposen els nostres clients.

A programme for computer aided identification of Phlebotomine sandflies of the Americas (CIPA): presentation and check-list of American species

The CIPA programme is a collaborative project including two entomologists from France and seven South and Central America countries. Its objective is the development of an expert system for computer aided identification of phlebotomine sandflies from the Americas. It also includes the formation of data bases for bibliographic, taxonomic and biogeographic data. Participant consensus on taxonomic prerequisites, standardization in bibliographic data collections and selection of descriptive variables for the final programme has been established through continous communication among participants and annual meetings. The adopted check-list of American sandflies presented here includes 386 specific taxa, ordered into genera and 28 sub-genera or species groups.

Implementació d'un Laboratori Virtual d'Equips Electrònics per múltiples aplicacions específiqies com a reforç docent en l'àrea de l'electrònica VERiLAB (Virtual ElectRonic LABoratory)

S’ha dissenyat un Laboratori Virtual d’Equips Electrònics per múltiples aplicacions específiques com a reforç docent en l’àrea de l’electrònica VERiLAB (Virtual ElectRonic LABoratory) i, a més, s’han dissenyat un conjunt de 9 pràctiques guiades per treure el màxim rendiment al laboratori virtual. El laboratori Virtual és una potent eina de treball per aplicacions docents com a programari d’iniciació a la utilització d’equips electrònics bàsics que podem trobar a qualsevol laboratori d’electrònica. Aquesta eina permet augmentar el nombre d’hores de treball pràctic fora del laboratori. La primera versió d’aquest programari es va dissenyar a l’any 2004 a la Universitat de Barcelona amb el software LabVIEW_7, el qual permet obtenir un fitxer executable amb el qual els alumnes poden treballar fora del laboratori. D’aquesta forma els alumnes únicament necessiten un ordinador per a poder fer les pràctiques. La primera versió del laboratori disposava d’un generador de funcions, un oscil·loscopi i un analitzador d’espectres com a equips electrònics, i a més a més incorporava un mòdul de filtres i un motor DC per treballar amb els equips. La versió 2 del Laboratori Virtual es va desenvolupar amb aquest projecte MQD i es va introduir una font d’alimentació, un multímetre de sobre taula i un portàtil com a equips electrònics. Es van crear també diferents mòduls de sistemes electrònics: filtres analògics, configuracions bàsiques basades en l’amplificador operacional, l’amplificador operacional no ideal i un circuit de rectificació d’ona completa. Aquests mòduls han premés ampliar el camp d’aplicació del Laboratori Virtual a diferents assignatures de l’àrea de l’electrònica.