A modelling approach to the development of an active management strategy for the Queen Elizabeth II reservoir

This article outlines the outcome of work that set out to provide one of the specified integral contributions to the overarching objectives of the EU- sponsored LIFE98 project described in this volume. Among others, these included a requirement to marry automatic monitoring and dynamic modelling approaches in the interests of securing better management of water quality in lakes and reservoirs. The particular task given to us was to devise the elements of an active management strategy for the Queen Elizabeth II Reservoir. This is one of the larger reservoirs supplying the population of the London area: after purification and disinfection, its water goes directly to the distribution network and to the consumers. The quality of the water in the reservoir is of primary concern, for the greater is the content of biogenic materials, including phytoplankton, then the more prolonged is the purification and the more expensive is the treatment. Whatever good that phytoplankton may do by way of oxygenation and oxidative purification, it is eventually relegated to an impurity that has to be removed from the final product. Indeed, it has been estimated that the cost of removing algae and microorganisms from water represents about one quarter of its price at the tap. In chemically fertile waters, such as those typifying the resources of the Thames Valley, there is thus a powerful and ongoing incentive to be able to minimise plankton growth in storage reservoirs. Indeed, the Thames Water company and its predecessor undertakings, have a long and impressive history of confronting and quantifying the fundamentals of phytoplankton growth in their reservoirs and of developing strategies for operation and design to combat them. The work to be described here follows in this tradition. However, the use of the model PROTECH-D to investigate present phytoplankton growth patterns in the Queen Elizabeth II Reservoir questioned the interpretation of some of the recent observations. On the other hand, it has reinforced the theories underpinning the original design of this and those Thames-Valley storage reservoirs constructed subsequently. The authors recount these experiences as an example of how simulation models can hone the theoretical base and its application to the practical problems of supplying water of good quality at economic cost, before the engineering is initiated.

A luta das enfermeiras por um espaço na FAB: a turma pioneira de oficiais (1981-1984)

Este estudo, de cunho histórico-social, tem como objeto a inserção de enfermeiras como oficiais da Força Aérea Brasileira (FAB) por meio do pioneiro Quadro Feminino de Oficiais (QFO). O marco inicial do estudo refere-se ao início do Estágio de Adaptação militar, em 02 de agosto de 1982 no Centro de Instrução Especializada da Aeronáutica (CIEAR), localizado na cidade do Rio de Janeiro. O marco final do estudo diz respeito ao término do período inicial obrigatório de dois anos de cumprimento de serviço ativo dessas enfermeiras, que culminou com a promoção das mesmas ao posto de 1Tenente (1984). Os objetivos do estudo são: descrever as circunstâncias de inserção das enfermeiras no processo seletivo do QFO, analisar o processo de incorporação do habitus militar durante o Estágio de Adaptação, e discutir as estratégias de luta das enfermeiras militares para ocuparem seus lugares devidos nos hospitais da FAB. A técnica de coleta de dados utilizada foi a entrevista e ocorreu no período de abril a maio de 2009 em hospitais da FAB da cidade do Rio de Janeiro. Foram entrevistadas cinco enfermeiras militares da primeira turma do QFO. O estudo foi cadastrado no SISNEP e aprovado pelo Comitê de Ética da FAB. Todos os sujeitos assinaram o Termo de consentimento livre e esclarecido e o Termo de doação de depoimento oral. O método utilizado foi o da História oral temática o referencial teórico do estudo foi baseado no pensamento do sociólogo francês Pierre Bourdieu, cujos conceitos de poder simbólico, habitus, campo, espaço social e violência simbólica sustentaram a construção desta dissertação. Para a análise e interpretação dos dados, seguimos os passos propostos por Maria Cecília Minayo de ordenação de dados, que compreendeu a transcrição na íntegra dos depoimentos; classificação cronológica e temática dos documentos escritos; classificação dos dados e a análise final. Evidenciou-se que diversos motivos incentivaram as enfermeiras a almejarem sua inserção na FAB como a boa remuneração, estabilidade financeira, progressão profissional, desbravamento de um novo campo de trabalho, clientela diferenciada, aposentadoria com salário integral e pioneirismo na FAB. O objetivo do Estágio de Adaptação militar foi inculcar do habitus militar nas candidatas a partir de ensinamentos baseados na hierarquia, disciplina, ética, dever e compromisso militar. Ao se inserirem nos hospitais da FAB, as enfermeiras receberam diversos cargos e funções, galgando um poder simbólico sobre a equipe de enfermagem. As inevitáveis lutas simbólicas dessas enfermeiras ocorreram com os médicos militares, com a equipe de enfermagem, com as enfermeiras civis e com a própria administração do hospital, e revelaram aspectos característicos de violência simbólica desencadeada por lutas de gênero e pela manutenção do poder, visto que as enfermeiras, dotadas de status de chefe e de militar, se inseriram num campo eminentemente masculino.

Multilayer Active Shell Mirrors

This thesis presents a novel active mirror technology based on carbon fiber composites and replication manufacturing processes. Multiple additional layers are implemented into the structure in order to provide the reflective layer, actuation capabilities and electrode routing. The mirror is thin, lightweight, and has large actuation capabilities. These features, along with the associated manufacturing processes, represent a significant change in design compared to traditional optics. Structural redundancy in the form of added material or support structures is replaced by thin, unsupported lightweight substrates with large actuation capabilities.

Several studies motivated by the desire to improve as-manufactured figure quality are performed. Firstly, imperfections in thin CFRP laminates and their effect on post-cure shape errors are studied. Numerical models are developed and compared to experimental measurements on flat laminates. Techniques to mitigate figure errors for thicker laminates are also identified. A method of properly integrating the reflective facesheet onto the front surface of the CFRP substrate is also presented. Finally, the effect of bonding multiple initially flat active plates to the backside of a curved CFRP substrate is studied. Figure deformations along with local surface defects are predicted and characterized experimentally. By understanding the mechanics behind these processes, significant improvements to the overall figure quality have been made.

Studies related to the actuation response of the mirror are also performed. The active properties of two materials are characterized and compared. Optimal active layer thicknesses for thin surface-parallel schemes are determined. Finite element simulations are used to make predictions on shape correction capabilities, demonstrating high correctabiliity and stroke over low-order modes. The effect of actuator saturation is studied and shown to significantly degrade shape correction performance.

The initial figure as well as actuation capabilities of a fully-integrated active mirror prototype are characterized experimentally using a Projected Hartmann test. A description of the test apparatus is presented along with two verification measurements. The apparatus is shown to accurately capture both high-amplitude low spatial-frequency figure errors as well as those at lower amplitudes but higher spatial frequencies. A closed-loop figure correction is performed, reducing figure errors by 94%.

A biologically active peptide in the skin of lampreys (Eudontomyzon danfordi vladykovi). [Translation from: Z.Naturforsch. (B), 26(10), 1021-1023, 1971. ]

In recent years interest in the production and description of kinin-type substances has been greatly intensified. So, for example, bradykinin, phyllokinin, physalaemin, ranatensin and caerulein could be extracted from the skin of amphibians as well as. eledoisin out of the salivary glands of Eledon moschata. An examination of lampreys seemed to us particularly profitable in the search for the incidence of further kinins. Ammocoetes of different sizes and also adults of both sexes of the species Eudontomyzon danfordi vladykovi were studied in this research. This species is found in many tributaries of the Danube. Skin extracts were tested on on isolated rat uterus, rat duodenum, guinea pig ileum and rabbit jejunum, further tests were done in order to determine a peptide character of the biologically active substance.

A simple method for counting bacteria with active electron transport system in water and sediment samples [Translation from: Kiel. Meeresforsch. 31(2) 83-86, 1975]

Description of a simple method for counting bacteria with active electron transport systems in water and sediment samples. Sodium succinate, NADH and NADPH served as electron donors. It is possible to see several sites of electron transport in the larger cells. Especially impressive are the plankton-algae, protozoa, and small metazoa. This is a partial translation of the ”method” section only.

Heterometallic Complexes as Models of Enzymatic Active Sites

This dissertation describes studies on two multinucleating ligand architectures: the first scaffold was designed to support tricopper complexes, while the second platform was developed to support tri- and tetrametallic clusters.

In Chapter 2, the synthesis of yttrium (and lanthanide) complexes supported by a tripodal ligand framework designed to bind three copper centers in close proximity is described. Tricopper complexes were shown to react with dioxygen in a 1:1 [Cu₃]/O₂ stoichiometry to form intermediates in which the O–O bond was fully cleaved, as characterized via UV-Vis spectroscopy and determination of the reaction stoichiometry. Pre-arrangement of the three Cu centers was pivotal to cooperative O₂ activation, as mono-copper complexes reacted differently with dioxgyen. The reactivity of the observed intermediates was studied with various substrates (reductants, O-atom acceptors, H-atom donors, Brønsted acids) to determine their properties. In Chapter 3, the reactivity of the same yttrium-tricopper complex with nitric oxide was explored. Reductive coupling to form a trans-hyponitrite complex (characterized by X-ray crystallography) was observed via cooperative reactivity by an yttrium and a copper center on two distinct tetrametallic units. The hyponitrite complex was observed to release nitrous oxide upon treatment with a Brønsted acid, supporting its viability as an intermediate in nitric oxide reduction to nitrous oxide.

In Chapter 4, a different multinucleating ligand scaffold was employed to synthesize heterometallic triiron clusters containing one oxide and one hydroxide bridges. The effects of the redox-inactive, Lewis acidic heterometals on redox potential was studied by cyclic voltammetry, unveiling a linear correlation between redox potential and heterometal Lewis acidity. Further studies on these complexes showed that the Lewis acidity of the redox-inactive metals also affected the oxygen-atom transfer reactivity of these clusters. Comparisons of this reactivity with manganese systems, collaborative efforts to reassign the structures of related manganese oxo-hydroxo clusters, and synthetic attempts to access related dioxo clusters are also described.

In Appendix A, ongoing efforts to synthesize new clusters supported by the same multinucleating ligand platform are described. Studies of novel approaches towards ligand exchange in tetrametallic clusters and incorporation of new supporting and bridging ligand motifs in trinuclear complexes are presented.