Avaliação de desempenho para estações de tratamento de efluentes industriais.

O processo produtivo industrial pode gerar uma grande quantidade de efluentes líquidos. Esses efluentes, quando não tratados, podem poluir o solo e a água, podendo causar grande impacto ambiental. Nesse sentido é imprescindível que todas as indústrias que geram efluentes líquidos possuam uma estação de tratamento. Porém, para que a estação esteja permanentemente funcionando de acordo com seu objetivo, essa deve ser rotineiramente avaliada. Dessa forma, a avaliação de desempenho para Estação de Tratamento de Efluentes Industriais (ETEI) se torna uma ferramenta importante para a manutenção da eficiência da estação, pois se justifica por procurar pontos vulneráveis da planta de tratamento fornecendo os subsídios necessários à elaboração do diagnóstico e projetos de adequação dos sistemas, permitindo que os efluentes tratados fiquem em conformidade com as exigências estabelecidas pela legislação ambiental. Neste trabalho, foi elaborada uma proposta metodológica, formada por um roteiro, composto por níveis de questionamentos, que auxilia o avaliador na análise de desempenho da ETEI. Complementando esse roteiro foram elaboradas algumas listas de verificação que contribuem para guiar o avaliador em suas análises. Na elaboração das listas, manuais desenvolvidos em diversos países foram considerados. As listas de verificação incluem perguntas para a avaliação dos dados gerais da indústria, para seu Sistema de Gestão Ambiental (SGA) e para alguns sistemas e unidades operacionais da estação de tratamento. Para exemplificar um dos níveis de questionamento do roteiro foi incluído um estudo de caso, no qual o afluente e o efluente de uma indústria mineradora foram avaliados através da técnica estatística multivariada Análise de Componentes Principais (ACP), para demonstração do desempenho da estação de tratamento. O resultado da avaliação realizada demonstrou um bom desempenho da ETEI em tratar os efluentes líquidos. Espera-se, portanto, que este trabalho seja útil para a avaliação de desempenho em plantas de tratamento de efluentes industriais.

Uso da calibração multivariada para a predição de propriedades físico-químicas de misturas de óleo de soja e biodiesel

O objetivo deste trabalho foi estabelecer um modelo empregando-se ferramentas de regressão multivariada para a previsão do teor em ésteres metílicos e, simultaneamente, de propriedades físico-químicas de misturas de óleo de soja e biodiesel de soja. O modelo foi proposto a partir da correlação das propriedades de interesse com os espectros de reflectância total atenuada no infravermelho médio das misturas. Para a determinação dos teores de ésteres metílicos foi utilizada a cromatografia líquida de alta eficiência (HPLC), podendo esta ser uma técnica alternativa aos método de referência que utilizam a cromatografia em fase gasosa (EN 14103 e EN 14105). As propriedades físico-químicas selecionadas foram índice de refração, massa específica e viscosidade. Para o estudo, foram preparadas 11 misturas com diferentes proporções de biodiesel de soja e de óleo de soja (0-100 % em massa de biodiesel de soja), em quintuplicata, totalizando 55 amostras. A região do infravermelho estudada foi a faixa de 3801 a 650 cm-1. Os espectros foram submetidos aos pré-tratamentos de correção de sinal multiplicativo (MSC) e, em seguida, à centralização na média (MC). As propriedades de interesse foram submetidas ao autoescalamento. Em seguida foi aplicada análise de componentes principais (PCA) com a finalidade de reduzir a dimensionalidade dos dados e detectar a presença de valores anômalos. Quando estes foram detectados, a amostra era descartada. Os dados originais foram submetidos ao algoritmo de Kennard-Stone dividindo-os em um conjunto de calibração, para a construção do modelo, e um conjunto de validação, para verificar a sua confiabilidade. Os resultados mostraram que o modelo proposto por PLS2 (Mínimos Quadrados Parciais) foi capaz de se ajustar bem os dados de índice de refração e de massa específica, podendo ser observado um comportamento aleatório dos erros, indicando a presença de homocedasticidade nos valores residuais, em outras palavras, o modelo construído apresentou uma capacidade de previsão para as propriedades de massa específica e índice de refração com 95% de confiança. A exatidão do modelo foi também avaliada através da estimativa dos parâmetros de regressão que são a inclinação e o intercepto pela Região Conjunta da Elipse de Confiança (EJCR). Os resultados confirmaram que o modelo MIR-PLS desenvolvido foi capaz de prever, simultaneamente, as propriedades índice de refração e massa específica. Para os teores de éteres metílicos determinados por HPLC, foi também desenvolvido um modelo MIR-PLS para correlacionar estes valores com os espectros de MIR, porém a qualidade do ajuste não foi tão boa. Apesar disso, foi possível mostrar que os dados podem ser modelados e correlacionados com os espectros de infravermelho utilizando calibração multivariada

Análise de componentes principais aplicada a ruído eletroquímico

Neste trabalho foi utilizado um método matemático para classificar registros de potencial e corrente de ensaios de corrosão na técnica de amperimetria de resistência nula (ZRA). Foi aplicado o método estatístico de múltiplas variáveis simples chamado Análise dos Componentes Principais (PCA), cujo objetivo principal foi identificar padrões nestes dados de ruído eletroquímico. Foram testados o aço carbono UNS G10200, os aços inoxidáveis austenítico UNS S31600 e o superduplex UNS S32750 em meios de ácido sulfúrico (5% H2SO4), cloreto férrico (0,1 mol/L FeCl3) e hidróxido de sódio (0,1% NaOH). Os ensaios foram replicados com oito repetições para se ter reprodutibilidade e conhecimento dos aspectos estatísticos envolvidos. Os resultados mostraram que a análise de componentes principais pode ser utilizada como uma ferramenta para analisar sinais de ruído eletroquímico, identificando os clusters dos comportamentos potencial-tempo, corrente-tempo e acessoriamente identificar os outliersdos registros temporais.

Evolução da deposição da matéria orgânica na Baía da Ilha Grande, RJ

Os ambientes costeiros vem sofrendo impactos devido a ocupação humana, um dos principais efeitos está na alteração da ciclagem de matéria orgânica (MO) na zona costeira. Para investigar as principais fontes de MO e avaliar como a atividade humana tem alterado a composição da MO sedimentar na baía da Ilha Grande (BIG), quatro testemunhos sedimentares (Abraão, Saco do Céu, TEBIG e Marina Piratas) foram datados e analisados para carbono orgânico, nitrogênio total, teor de finos, esteróis e n-álcoois. Os resultados indicam maiores contribuições de matéria orgânica alóctone nos testemunhos da enseada de Abraão e principalmente do Saco do Céu, estes testemunhos são enriquecidos em carbono orgânico e sedimentos finos, em comparação com os sedimentos coletados nas proximidades do TEBIG e da Marina Piratas. A partir dos anos de 1950 algumas alterações, como o incremento da contribuição fitoplanctônica,são observadas nos testemunhos foram indicadas pela Análise de Componentes Principais (PCA), destaca-se nesta época a acentuada mudança que ocorreu nas características granulométricas do testemunho da Marina Piratas. Estas alterações são efeitos indiretos da ação do homem que devido ao elevado crescimento populacional vem poluindo corpos dágua da região e destruindo ecossistemas de elevada importância como manguezais. No entanto através da análises dos marcadores de esgoto foi observado que a influência de MO de origem fecal nos sedimentos é muito pequena e cresceu muito pouco nas últimas décadas. Em conjunto com a elevada cobertura vegetal da região, os elevados índices pluviométricos regionais auxiliam a carrear grandes quantidades de material terrígeno para os sedimentos da baía como indicado pela predomínio de n-álcoois de cadeias longas

Spatial coherence and persistence in annual streamflow in the western United States [abstract]

EXTRACT (SEE PDF FOR FULL ABSTRACT): Four broad regions of the western United States within which annual streamflows exhibit strong spatial coherence are identified using principal component analysis with a varimax rotation. Geographically, the four regions encompass the Pacific Northwest, Far West-Great Basin, Central Rockies-High Plains, and Northern Great Plains. These regions are really consistent with previously documented, descriptively derived streamflow regimes as well as with general atmospheric circulation and precipitation modes of variation. Collectively, the four regional components account for nearly 63 percent of the total annual variation in western U.S. streamflow. The time history of most principal component patterns exhibit little or no persistence.

Annual stream flow variability over the western United States [abstract]

EXTRACT (SEE PDF FOR FULL ABSTRACT): The variability of mean annual streamflow over the western United States is described and related to indices of large scale atmospheric circulation over the Pacific Ocean and western U.S. Principal component analysis reveal [sic] four statistically significant modes of streamflow variability across the region.

Hybridization between two serranids, the coney (Cephalopholis fulva) and the creole-fish (Paranthias furcifer), at Bermuda

Intergeneric hybridization between the epinepheline serranids Cephalopholis fulva and Paranthias furcifer in waters off Bermuda was investigated by using morphological and molecular characters. Putative hybrids, as well as members of each presumed parent species, were analyzed for 44 morphological characters and screened for genetic variation at 16 nuclear allozyme loci, two nuclear (n)DNA loci, and three mitochondrial (mt)DNA gene regions. Four of 16 allozyme loci, creatine kinase (CK-B*), fumarase (FH*), isocitrate dehydrogenase (ICDH-S*), and lactate dehydrogenase (LDH-B*), were unique in C. fulva and P. furcifer. Restriction fragments of two nuclear DNA intron regions, an actin gene intron and the second intron in the S7 ribosomal protein gene, also exhibited consistent differences between the two presumed parent species. Restriction fragments of three mtDNA regions—ND4, ATPase 6, and 12S/16S ribosomal RNA—were analyzed to identify maternal parentage of putative hybrids. Both morphological data and nuclear genetic data were found to be consistent with the hypothesis that the putative hybrids were the result of interbreeding between C. fulva and P. furcifer. Mean values of 38 morphological characters were different between presumed parent species, and putative hybrids were intermediate to presumed parent species for 33 of these characters. A principal component analysis of the morphological and meristic data was also consistent with hybridization between C. fulva and P. furcifer. Thirteen of 15 putative hybrids were heterozygous at all diagnostic nuclear loci, consistent with F1 hybrids. Two putative hybrids were identified as post-F1 hybrids based on homozygosity at one nuclear locus each. Mitochondrial DNA analysis showed that the maternal parent of all putative hybrid individuals was C. fulva. A survey of nuclear and mitochondrial loci of 57 C. fulva and 37 P. furcifer from Bermuda revealed no evidence of introgression between the parent species mediated by hybridization.

葡萄果皮花色苷构成特点、遗传规律及其在果实成熟过程中的变化

通过利用高效液相色谱-质谱联用技术，研究110 个不同基因型（包括3 个种和5 个种间杂种）葡萄品种的花色苷含量和成分特点。在所有品种中，最多鉴定出29 种花色苷。对葡萄的花色苷总量来说，一般情况下，欧亚种和欧美杂交种的花色苷含量较低，而野生种和砧木品种显著高于其它的种间杂种；在同一个种内，酿酒品种高于鲜食品种；在大多数高花色苷含量的种质中，二甲基花翠素类花色苷是主要的花色苷，而在低总花色苷量的品种，花青素类和花翠素类花色苷是主要的成分。此外，在欧亚种葡萄中，仅检测到单糖苷类花色苷，而在其它葡萄种质中，既有单糖苷花色苷又有双糖苷花色苷。在欧亚鲜食葡萄中，Pn-3-glucoside 是主要的花色苷，而在欧亚酿酒葡萄中，Mv-3-glucoside 是主要的花色苷。通过主成分分析，最终根据花色苷总量的不同和单、双糖苷含量的不同，110 个品种在散点图中被明显的分成3 部分。 通过连续两年调查3 个欧亚鲜食葡萄杂交组合的亲本和后代的花色苷含量来分析花色苷的遗传特点。共鉴定出16 种花色苷，且均为单糖苷类。母本中各花色苷的比例决定了后代中花色苷含量的比例，但是后代中花色苷的绝对含量不受亲本影响。不论亲本还是后代中，Peonidin 3-O-glucoside 和Malvidin3-O-glucoside 都是含量最高的花色苷。花色苷的有或无是寡基因控制的质量性状，而含量的多少是多基因控制的数量性状。通过主成分分析可以得知：在杂交后代中， peonidin 3-O-glucoside, malvidin 3-O-glucoside, delphinidin3-O-glucoside, cyanidin 3-O-glucoside, petunidin 3-O-glucoside, peonidin3-O-(6-O-coumaryl)-glucoside 和malvidin 3-O-(6-O-coumaryl)-glucoside 是影响果皮中花色苷总量的主要种类。花色苷的含量是一种高广义遗传力的性状，而且这种性状在两年间是稳定的（0.65-0.98）。 5 个不同基因型葡萄品种在成熟过程中果实品质的变化也被研究。始熟期开始后，果粒重量继续增加，果粒较大的鲜食品种增长很慢，而果粒较小的制汁和酿酒品种增长幅度很大；果实内两种主要的糖（葡萄糖和果糖）开始快速上升，且在整个成熟过程中保持1：1；有机酸的含量开始快速下降，苹果酸下降的幅度大于酒石酸。多酚物质在果实始熟期也发生巨大变化，花色苷快速积累。 ‘北紫’和‘梅鹿辄’中的花色苷在成熟前1-2 周达到最大值，‘黑奥林’、‘康可’和‘北醇’在整个成熟过程中花色苷一直增加；对非花色苷类多酚来说，‘黑奥林’和‘梅鹿辄’在果实成熟过程中一直增加，而在另3 个品种中是下降的；花色苷之间以及与黄酮醇之间成正相关，花色苷和酚酸成负相关关系，酚酸和黄酮醇也成负相关关系，黄烷醇物质之间以及与其它类黄酮物质之间成负相关关系。

The zooplankton population structure and their trend of variations in the southern of Caspian Sea (Iranian waters)

Caspian Sea has gone under a lot of changes due to human influences and the unwanted presence of a ctenophora Menomiopsis leidyi which has greatly changed the structure of planktons in the last recent years. Therefore, this study was carried out in order to determine these changes in the zooplankton community. the Sampling was done in 8 transacts in Astara, Anzali, Sefidrood, Tonekaboun, Noushahr, Babolsar, Amirabad and Bandar Torkaman coastal waters at 5 different depths including 5, 10, 20, 50 and 100 m. Sampling was carried out in four seasons of spring, summer, autumn and winter during 2008, 2009 and 2010 on board of R/V Gilan. Altogether, 12 species of zooplankton were identified in 2008, 22 species in 2009 and 14 species in 2010. The zooplankton included four groups: copepoda (4 species), cladocera (8species), rotatoria (10 species) and protozoa (2 species).The increase of diversity in 2009 was due to cladocera and rotatoria groups. The abundance of zooplankton in the spring was 5074 + 7807 ind/m3 more than other season in 2008. The abundance of copepoda in the summer reached the highest value of 3332 ind/m3 and since autumn the abundance gradually decreases and in the winter reached to the lowest value. The most abundance of cladocera was 797 ind/m3 in winter and decreased in summer and autumn. The abundance of rotatoria was 2189 ind/m3 in winter. rotifera and copepoda consisted the main population of Zooplanktons in the winter. The results of 2009 and 2010 showed that the abundance of zooplankton in winter was 2.6 fold of autumn, 1.6 fold of summer and 1.1 fold (1/9 fold in 2010)of spring. After increasing increased of temperature, phytoplankton, and zooplankton in summer, M.leidyi increased too. In the autumn M. leidyi reached to the highest rate and decreased zooplankton. The maximum population of zooplankton was in the layer 0-20 m and in the layer more than 20 meters, the abundance of zooplankton decreased very much. In 216 2008, 2009 and 2010, the abundance of zooplankton was 87, 77 and 77 percent in the layer 0-20 m respectively. In this study, the thermocline was observed in the layer 10 – 20 meters in the spring, that formed a thin layer but in the summer it was in the layer 20 to 50 meters. Temperature decreased between 11 to 15 oC in this layer. The variation of temperature between surfaces to bottom was 10 to 13 oC in spring, 19 to 21 in summer, about 9 oC in autumn and maximum 3 oC in winter. The most biomass of zooplankton was in the west. The biomass of zooplankton in central west and east of Southern of Caspian Sea was 54 %, 22 % and 24 % respectively in 2008, in 2009 was 48%, 33% and 20% respectively and in 2010 was 54 %, 29 % and 16 % respectively .The biomass decreased from west to east. The model of zooplankton designed by principal component analysis (PCA)and linear regression for Southern of Caspian Sea.

Study on some biological and feeding factors of spined loach Cobitis taenia from the Babolrud, Talar and Siahrud Rivers

Spined loach, Cobitis taenia, is a predominant fish in the river systems of the southern Caspian Sea basin. Although there is evidence of the geographical divergence of this taxon, but no information is available on morphological differences within the species populations. This study was designed to evaluate some biological factors including; morphometric and meristic characters, length-weight, age-growth, condition factor, diet, reproduction, variation and differentiation, in the Babolrud, Talar and Siahrud Rivers in south of the Caspian Sea basin. Age, sex ratio, fecundity, ova diameter and gonadosomatic index were estimated. Also, regression analyses was tested the relation between fecundity and fish length, weight, gonad weight, and also age. Totally 858 fish of which 721 were matures, were collected from these rivers by electrofishing. 37 morphometric characters, 9 meristic characters and 78 truss network system characters were estimated. Resulats of DFA analysis based on data of morphometric and meristic showd that these populations are highly (94.5%) varios from each other. In discriminate function analysis, the proportion of individuals correctly classified into their original groups was 61%, 65.4% and 86.5% for upstream and downstream, respectively. Clustering based on Euclidean distances among groups of centroids using an UPGMA and also principal component analysis’ results for morphometric data indicated that these populations from these three rivers were clearly distinct from each other. Regression equations between length and weight in these three populations were significantly different from Folton factor (b=3), that showed the fish has a negative Alometric growth process. Condition factor was estimated between 0.8912 to 1.2736 and 0.8131 to 1.4489 for males and females, respectively. Sex ratio (female: male) in these populations was 1.2816:1. The difference between the number of females and males was significant and females were more than males. The female and male specimens reach maturity by Tl more than 40 and 30 mm and at the age of 2+ and 1+, respectively. The mean of ova diameter was 0.5824±0.2882. The spawning took place from May to late July, at the water temperature from 18.7 to 24.0°C. The GSI values average at the beginning of the reproduction period was about 9%, with ranged from 2 to 26% in ripe mature females. The absolute and relative fecundity were 2109±792 and 579±208 respectively. The absolute fecundity was significantly related to body weight and gonads weight. Based on the pattern of gonado-somatic index, it was concluded that this fish has prolong active reproductive period, which is a type of adaptation by short-lived small fishes to environmental conditions. The macroscopic and histological results showed that the female and male have 5 and 4 stages in their maturation process, respectively. The RLG index was about 0.4732, which showed the fish is a carnivorous species. Significant difference was observed between fishes with different length and diet. The main foods of the fish were Trichoptera, Chironomidae larvae and Ephemeroptera which were their prefered food as well, however it was estimated that the food selection and diet are affected by environmental conditions.

Investigation on biodiversity and population structure of Penaeus sernisulcatus [sic] in northern waters of Persian Gulf

Green tiger prawn, Penaeus sentisulcatus is one of the commercial species of Persian Gulf, which is distributed from north to Strait of I Iormoze. Concerning its role in fisheries economic, various research projects on stock assessment, biology and aquaculture has been conducted. This research is targeted the identification of various populations of green tiger prawn in northern waters of Persian Gulf. The area has been divided to five regions from north to south named; Bahrakan, Boushehr, Tangestan, Motaaf and Strait of Hormoz. In each region, numbers of sampling stations trawled, and live shrimp species carried in containers equipped with air pump, to coastal laboratories in Boushehr and Bandar Abbass Fisheries Research Centers. Biometeric, morphometeric and merestic measures for 45 factars done, and peices of muscles, eye and ovary tissues dissected, and stored in liquid nitrogen. Protein extraction, and polyacrylamid gel electrophoresis by SDS-PAGE technique for tissues samples conducted. Data of 45 morphometeric and merestic characteristics analyzed by principal component analysis (PCA), and clustering analysis methods. The results of analysis showed that, the populations of Bahrakan and Mota.af regions are differentiated, while population of Boushehr and Tangestan regions were mixed, and named as a single population. The analysis of electrophoretic data also confirmed this result, and showed a distinct population in Strait of Hormoz. Therefore, this research illustrated four distinct populations for P. semisulcatus in northern area of Persian Gulf, named Bahrakan (north of Boushehr), Boushehr and Tangesta.n (adjacent), Motaaf and it's south, and Strait of Hormoz. Study of morphometeric characteristics of carapace factors, genital organs, antenna and life cycle of samples of different regions resulting identification of a subspecies, which is named Penaeus seinisuleatus persicus.

PCB-integrated optical waveguide sensors: An ammonia gas sensor

This paper presents a novel platform for the formation of cost-effective PCB-integrated optical waveguide sensors. The sensor design relies on the use of multimode polymer waveguides that can be formed directly on standard PCBs and commercially-available chemical dyes, enabling the integration of all essential sensor components (electronic, photonic, chemical) on low-cost substrates. Moreover, it enables the detection of multiple analytes from a single device by employing waveguide arrays functionalised with different chemical dyes. The devices can be manufactured with conventional methods of the PCB industry, such as solder-reflow processes and pick-and-place assembly techniques. As a proof of principle, a PCB-integrated ammonia gas sensor is fabricated on a FR4 substrate. The sensor operation relies on the change of the optical transmission characteristics of chemically functionalised optical waveguides in the presence of ammonia molecules. The fabrication and assembly of the sensor unit, as well as fundamental simulation and characterisation studies, are presented. The device achieves a sensitivity of approximately 30 ppm and a linear response up to 600 ppm at room temperature. Finally, the potential to detect multiple analytes from a single device is demonstrated using principal-component analysis. © 1983-2012 IEEE.

Low-rank optimization on the cone of positive semidefinite matrices

We propose an algorithm for solving optimization problems defined on a subset of the cone of symmetric positive semidefinite matrices. This algorithm relies on the factorization X = Y Y T , where the number of columns of Y fixes an upper bound on the rank of the positive semidefinite matrix X. It is thus very effective for solving problems that have a low-rank solution. The factorization X = Y Y T leads to a reformulation of the original problem as an optimization on a particular quotient manifold. The present paper discusses the geometry of that manifold and derives a second-order optimization method with guaranteed quadratic convergence. It furthermore provides some conditions on the rank of the factorization to ensure equivalence with the original problem. In contrast to existing methods, the proposed algorithm converges monotonically to the sought solution. Its numerical efficiency is evaluated on two applications: the maximal cut of a graph and the problem of sparse principal component analysis. © 2010 Society for Industrial and Applied Mathematics.

Optimal data fitting on lie groups: A coset approach

This work considers the problem of fitting data on a Lie group by a coset of a compact subgroup. This problem can be seen as an extension of the problem of fitting affine subspaces in n to data which can be solved using principal component analysis. We show how the fitting problem can be reduced for biinvariant distances to a generalized mean calculation on an homogeneous space. For biinvariant Riemannian distances we provide an algorithm based on the Karcher mean gradient algorithm. We illustrate our approach by some examples on SO(n). © 2010 Springer -Verlag Berlin Heidelberg.

Spatial distribution of benthic algae in the Gangqu River, Shangrila, China

This study consisted of sampling benthic algae at 32 sites in the Gangqu River, an important upstream tributary of the Yangtze River. Our aims were to characterize the benthic algae communities and relationships with environmental variables. Among the 162 taxa observed, Achnanthes linearis and Achnanthes lanceolata var. elliptica were the dominant species (17.10% and 14.30% of the total relative abundance, respectively). Major gradients and principal patterns of variation within the environmental variables were detected by principal component analysis (PCA). Then non-metric multidimensional scaling (NMS) divided all the sites into three groups, which were validated by multi-response permutation procedures (MRPP). Canonical correspondence analysis (CCA) indicated that three environmental variables (TN, TDS, and TP) significantly affected the distribution of benthic algae. Weighted averaging regression and cross-calibration produced strong models for predicting TN and TDS concentration, which enabled selection of algae taxa as potentially sensitive indicators of certain TN and TDS levels: for TN, Achnanthes lanceolata, Achnanthes lanceolata var. elliptica, and Cymbella ventricosa var. semicircularis; for TDS, Cocconeis placentula, Cymbella alpina var. minuta, and Fragilaria virescens. The present study represents an early step in establishing baseline conditions. Further monitoring is suggested to gain a better understanding of this region.